SEARCH · Engineering Papers
Results for “doping of semiconductors”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Enabling room temperature ferromagnetism in monolayer MoS2 via in situ iron-doping
Abstract Two-dimensional semiconductors, including transition metal dichalcogenides, are of interest in electronics and photonics but remain nonmagnetic in their intrinsic form. Previous efforts to form two-dimensional dilute magnetic semiconductors utilized extrinsic doping techniques or bulk crystal growth, detrimentally affecting uniformity, scalability, or Curie temperature. Here, we demonstrate an in situ substitutional doping of Fe atoms into MoS 2 monolayers in the chemical vapor deposition growth. The iron atoms substitute molybdenum sites in MoS 2 crystals, as confirmed by transmission electron microscopy and Raman signatures. We uncover an Fe-related spectral transition of Fe:MoS 2 monolayers that appears at 2.28 eV above the pristine bandgap and displays pronounced ferromagnetic hysteresis. The microscopic origin is further corroborated by density functional theory calculations of dipole-allowed transitions in Fe:MoS 2 . Using spatially integrating magnetization measurements and spatially resolving nitrogen-vacancy center magnetometry, we show that Fe:MoS 2 monolayers remain magnetized even at ambient conditions, manifesting ferromagnetism at room temperature.
An Innovative Method for Preparing Semiconductor Change Used in Crystal Growth and Shear Cell Diffusion Experiments
An innovative technique for machining semiconductors has been developed. This technique was used to prepare semiconductor charges for crystal growth and shear cell diffusion experiments. The technique allows brittle semiconductor materials to be quickly and accurately machined. Lightly doping the semiconductor material increases the conductivity enough to allow the material to be shaped by an electrical discharge machine (EDM).
Evaluation of the Improvement in the Figure of Merit of Bi_2Te_3-Based Alloys with Addition of Ultrafine Scattering Centers
The addition of ultrafine scattering centers into Bi_2Te_3-based materials and their impact on the thermal and electrical transport properties in a 200-500 K temperature range are discussed. Based on previous theoretical efforts, the resulting improvements in the figure of merit of these heavily doped thermoelectric semiconductors were calculated as a function of composition, temperature, doping level, particulate size and concentration. Determination of the lattice thermal conductivity of the various alloys was conducted by considering phonon-phonon, carrier-phonon, point defect and inert scattering center scattering mechanisms. Degradation of the electrical properties due to the increase scattering rate was also taken into account. Practical application of these results is considered.
Negative photoconductivity associated with impurity conduction in germanium
Negative photoconductivity in doped germanium semiconductor device - solid state physics
Selective thermal neutron transmutation doping with Gd masks in GaN semiconductors
For the first time, selective neutron transmutation doping was successfully performed on GaN through Gd masks, showing the feasibility of patternable doping through neutron irradiations. In collaborating with Oak Ridge National Laboratory, GaN with Gd masks was irradiated by directional neutrons. By using the Gd properties with high neutron absorption cross-sections, it was confirmed that the area covered by Gd masks on GaN was completely shielded from neutrons, and the uncovered area was doped with the generated Ge and 14 C. Property differences were clearly identified in various ways when comparing the area exposed by neutrons and the area unexposed by neutrons. The discoloration by the ejected protons and elastic scattering of neutrons appeared only in the exposed area while the unexposed area remained the same as before irradiation. The aspect ratio of the patterned profile of GaN was estimated by comparing patterns on the front and backside. From energy dispersive X-ray spectroscopy spectra and secondary ion mass spectrometry measurement, the concentration difference between Ge and 14 C as well as the exact concentration of produced 14 C was also checked. Further, Schottky barrier diodes on the selectively doped GaN were fabricated and investigated to study the electrical properties.
Solvent-induced electrochemistry at an electrically asymmetric carbon Janus particle
Chemical doping through heteroatom substitution is often used to control the Fermi level of semiconductor materials. Doping also occurs when surface adsorbed molecules modify the Fermi level of low dimensional materials such as carbon nanotubes. A gradient in dopant concentration, and hence the chemical potential, across such a material generates usable electrical current. This opens up the possibility of creating asymmetric catalytic particles capable of generating voltage from a surrounding solvent that imposes such a gradient, enabling electrochemical transformations. In this work, we report that symmetry-broken carbon particles comprised of high surface area single-walled carbon nanotube networks can effectively convert exothermic solvent adsorption into usable electrical potential, turning over electrochemical redox processes in situ with no external power supply. The results from ferrocene oxidation and the selective electro-oxidation of alcohols underscore the potential of solvent powered electrocatalytic particles to extend electrochemical transformation to various environments.
Neutron Transmutation Doped (NTD) germanium thermistors for sub-mm bolometer applications
Recent advances in the development of neutron transmutation doped (NTD) semiconductor thermistors fabricated from natural and controlled isotopic composition germanium are reported. The near ideal doping uniformity that can be achieved with the NTD process, the device simplicity of NTD Ge thermistors and the high performance of cooled junction field effect transistor preamplifiers led to the widespread acceptance of these thermal sensors in ground-based, airborne and spaceborne radio telescopes. These features made possible the development of efficient bolometer arrays.
Using block-copolymer nanolithography as a tool to sensitively evaluate variation in chemical dry etching rates of semiconductor materials with sub-5 nm resolution
Ion implantation is a robust and established method to customize the electronic properties of Si. However, fabricating doped, ultrafine semiconductor nanostructures can be challenging. Ion implantation has well-established effects on the dry etch rates of Si, which becomes increasingly consequential as the target dimension shrinks below a few tens of nanometers. While dry etching arrays of block copolymer-templated nanoscale holes (pitch = 37.5 nm, diameter ~25 nm) into p-type, n-type, and undoped Si, we observed that the lateral etch rate was notably larger for the n-type regions than p-type or undoped regions. By doing image analyses on high resolution electron micrographs of the nanostructured hole arrays, we were able to extract the porosity and average radii of the holes with subnanometer sensitivity and compare the relative etch rates between different doping conditions. We found that degenerately doped n-type silicon consistently etches between approximately 17% and 27% faster in the lateral direction than p-type Si, resulting in significantly larger porosity and, consequently, less mechanical stability. Here, we demonstrate that top-down dimensional analysis of a densely packed porous nanostructure is a robust method for assessing extremely small differences in the lateral, chemical etch rate of doped Si to a degree of sensitivity that was previously unachievable. The minute, dense-packed nature of block copolymer self-assembled nanostructures is shown to be ideal for this application. This proposed method could be useful for designing fabrication processes for heterogeneous nanostructures, as slight dry etch rate variations that may be within process tolerance at the micrometer-scale appear to have nontrivial consequences at the nanometer scale.
Monolayer Vanadium‐Doped Tungsten Disulfide: A Room‐Temperature Dilute Magnetic Semiconductor
Abstract Dilute magnetic semiconductors (DMS), achieved through substitutional doping of spin‐polarized transition metals into semiconducting systems, enable experimental modulation of spin dynamics in ways that hold great promise for novel magneto–electric or magneto–optical devices, especially for two‐dimensional (2D) systems such as transition metal dichalcogenides that accentuate interactions and activate valley degrees of freedom. Practical applications of 2D magnetism will likely require room‐temperature operation, air stability, and (for magnetic semiconductors) the ability to achieve optimal doping levels without dopant aggregation. Here, room‐temperature ferromagnetic order obtained in semiconducting vanadium‐doped tungsten disulfide monolayers produced by a reliable single‐step film sulfidation method across an exceptionally wide range of vanadium concentrations, up to 12 at% with minimal dopant aggregation, is described. These monolayers develop p‐type transport as a function of vanadium incorporation and rapidly reach ambipolarity. Ferromagnetism peaks at an intermediate vanadium concentration of ~2 at% and decreases for higher concentrations, which is consistent with quenching due to orbital hybridization at closer vanadium–vanadium spacings, as supported by transmission electron microscopy, magnetometry, and first‐principles calculations. Room‐temperature 2D‐DMS provide a new component to expand the functional scope of van der Waals heterostructures and bring semiconducting magnetic 2D heterostructures into the realm of practical application.
Atomic-scale 3D imaging of individual dopant atoms in an oxide semiconductor
The physical properties of semiconductors are controlled by chemical doping. In oxide semiconductors, small variations in the density of dopant atoms can completely change the local electric and magnetic responses caused by their strongly correlated electrons. In lightly doped systems, however, such variations are difficult to determine as quantitative 3D imaging of individual dopant atoms is a major challenge. We apply atom probe tomography to resolve the atomic sites that donors occupy in the small band gap semiconductor Er(Mn,Ti)O 3 with a nominal Ti concentration of 0.04 at. %, map their 3D lattice positions, and quantify spatial variations. Our work enables atomic-level 3D studies of structure-property relations in lightly doped complex oxides, which is crucial to understand and control emergent dopant-driven quantum phenomena.
Impurity induced confinement effects in size-separated Mn-doped CsPbCl 3 nanocrystals
Beyond quantum confinement, impurity doping of semiconductor nanocrystals (NCs) offers a degree of control over their optical and electronic properties, which are of interest for potential applications. Manganese (Mn)-doped CsPbCl 3 NCs, for example, show synergistic effects in the visible, with large enhancements in both blue (exciton) and red (dopant) emission over a narrow range of dopant concentration. Although Mn concentration is the primary parameter, NC size offers an additional degree of control over the number of dopants per NC. Size-resolved CsPbCl 3 NCs prepared in the limit of strong Mn doping highlight the emergence of defective NCs with deviations from anticipated confinement trends. In conclusion, the transition correlates with a redshift and increase in the amplitude of dopant emission, and we discuss these observations in the context of atomistic simulations of Ruddlesden-Popper defects in CsPbCl 3 .
Doping with phosphorus reduces anion vacancy disorder in CdSeTe semiconductors enabling higher solar cell efficiency
Doping is used in many pn junction devices, such as polycrystalline solar cells, to increase the strength of the junction field to assist charge carrier collection and thus partially mitigate nonradiative recombination losses. We demonstrate a different doping characteristic for inorganic solar cells: using dopants to reduce charge carrier trapping and electronic band tails. Alloying CdTe with Se to form CdSeTe semiconductor reduced recombination, but CdSeTe has more complex defect states which can limit further efficiency gains due to charge carrier trapping and trap-limited mobility. Doping CdSeTe with P (but not N, As, or Sb in this study) reduces band tails (Urbach energies) and lessens the impact of the near valence band trap states, with ambipolar mobilities improving to >50 cm 2 V −1 s −1 , fill factor increasing from 76% to 79%, and efficiencies increasing by 0.9% absolute. Simulations are used to show how such defect reduction improves performance in the radiative limit.
Pressure-Modulated Energy Transfer Dynamics in Mn 2+ -Doped CdS/ZnS Core/Shell Quantum Dots
Transition metal doping in semiconductor quantum dots (QDs) significantly impacts their optical properties, thus expanding the range of their potential optoelectronic applications. This study investigates the pressure-dependent energy transfer dynamics in Mn 2+ -doped CdS/ZnS core/shell QDs, focusing on how external hydrostatic pressure modulates these dynamics and optical properties. By synthesizing Mn 2+ -doped QDs with varying Mn 2+ doping concentrations, we explore the effects of the pressure on photoluminescence (PL) spectra and energy transfer efficiency. Our study reveals that increasing pressure induces a blueshift in the QD host bandgap PL and a redshift in the Mn 2+ dopant PL. The pressure-induced shifts highlight a unique modulation mechanism where the energy transfer efficiency decreases with pressure due to reduced wave function overlap between host excitons and Mn 2+ dopants. Detailed analysis of the PL quantum yields and energy transfer rate constants provides insights into these dynamics, suggesting that the pressure can effectively and reversibly regulate the energy transfer efficiencies and rates. In conclusion, these results have implications for developing pressure-sensitive configurable devices and exploring pressure-induced phenomena in doped nanomaterials.
Structural Complexity and Tuned Thermoelectric Properties of a Polymorph of the Zintl Phase Ca 2 CdSb 2 with a Non-centrosymmetric Monoclinic Structure
The Zintl phase Ca 2 CdSb 2 was found to be dimorphic. Besides the orthorhombic Ca 2 CdSb 2 (-o), here we report on the synthesis, the structural characterization, and the thermoelectric transport properties of its monoclinic form, Ca 2 CdSb 2 (-m), and its Lu-doped variant Ca 2–x Lu x CdSb 2 (x ≈ 0.02). The monoclinic structure exhibits complex structural characteristics and constitutes a new structure type with the non-centrosymmetric space group Cm (Z = 30). The electrical resistivity ρ(T) measured on single crystals of both phases portrays a transition from a semiconductor to a degenerate p-type semiconductor upon doping with Lu and with an attendant change in the Hall carrier concentration nH from 7.15 × 10 18 to 2.30 × 10 19 cm –3 at 300 K. The Seebeck coefficient S(T) of both phases are comparable and indicate a hole-dominated carrier transport mechanism with magnitudes of 133 and 116 μV/K at 600 K for Ca 2 CdSb 2 (-m) and Ca 2–x Lu x CdSb 2 , respectively. The convoluted atomic bonding with an attendant large unit cell volume of ~4365 Å 3 drives a putative low thermal conductivity in these materials resulting in a power factor PF of 1.63 μW/cm K 2 and an estimated thermoelectric figure of merit zT of ~0.5 for Ca 2–x Lu x CdSb 2 at 600 K. Furthermore, differential scanning calorimetry results reveal the stability of these phases up to about 960 K, making them candidates for moderate temperature thermoelectric materials.
Generation and enhancement of surface acoustic waves on a highly doped p-type III-V semiconductor substrate
A device employing the generation and enhancement of surface acoustic waves on a highly doped p-type III-V semiconductor substrate (e.g., GaAs, GaSb, InAs, or InGaAs). The device includes two SiO 2 /ZnO islands, each including a SiO 2 buffer layer deposited on the doped p-type III-V semiconductor substrate and a ZnO layer deposited on the SiO 2 buffer layer. An input interdigital transducers (IDT) and an output IDT are each patterned on one of the SiO 2 /ZnO islands. The IDTs generates surface acoustic waves along an exposed surface of the highly doped p-type III-V semiconductor substrate. The surface acoustic waves improve the photoelectric and photovoltaic properties of the device. The device is manufactured using a disclosed technique for propagating strong surface acoustic waves on weak piezoelectric materials. Also disclosed is a photodetector developed using that technique.
Structural and Dynamic Disorder, Not Ionic Trapping, Controls Charge Transport in Highly Doped Conducting Polymers
Doped organic semiconductors are critical to emerging device applications, including thermoelectrics, bioelectronics, and neuromorphic computing devices. It is commonly assumed that low conductivities in these materials result primarily from charge trapping by the Coulomb potentials of the dopant counter-ions. Here, we present a combined experimental and theoretical study rebutting this belief. Using a newly developed doping technique, we find the conductivity of several classes of high-mobility conjugated polymers to be strongly correlated with paracrystalline disorder but poorly correlated with ionic size, suggesting that Coulomb traps do not limit transport. A general model for interacting electrons in highly doped polymers is proposed and carefully parameterized against atomistic calculations, enabling the calculation of electrical conductivity within the framework of transient localisation theory. Theoretical calculations are in excellent agreement with experimental data, providing insights into the disordered-limited nature of charge transport and suggesting new strategies to further improve conductivities.
Planar varactor frequency multiplier devices with blocking barrier
The invention relates to planar varactor frequency multiplier devices with a heterojunction blocking barrier for near millimeter wave radiation of moderate power from a fundamental input wave. The space charge limitation of the submillimeter frequency multiplier devices of the BIN(sup +) type is overcome by a diode structure comprising an n(sup +) doped layer of semiconductor material functioning as a low resistance back contact, a layer of semiconductor material with n-type doping functioning as a drift region grown on the back contact layer, a delta doping sheet forming a positive charge at the interface of the drift region layer with a barrier layer, and a surface metal contact. The layers thus formed on an n(sup +) doped layer may be divided into two isolated back-to-back BNN(sup +) diodes by separately depositing two surface metal contacts. By repeating the sequence of the drift region layer and the barrier layer with the delta doping sheet at the interfaces between the drift and barrier layers, a plurality of stacked diodes is formed. The novelty of the invention resides in providing n-type semiconductor material for the drift region in a GaAs/AlGaAs structure, and in stacking a plurality of such BNN(sup +) diodes stacked for greater output power with and connected back-to-back with the n(sup +) GaAs layer as an internal back contact and separate metal contact over an AlGaAs barrier layer on top of each stack.