Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Doping Effects on Multivalence States, Electronic Structure, and Optical Band Gap in LaCrO 3 under Varied Atmospheres: An Integrated Experimental and Density Functional Theory Study

Doping effects on the valence state, electronic structure, and optical band and the effects on electrical conductivity were studied on the doped lanthanum chromite (LaCrO 3 ) system. The specific compositions studied were La 1–x Ca x CrO 3 (LCCx), La 1–x Sr x CrO 3 (LSCx), and La 0.8 Sr 0.2 Cr 1–x Mn x O 3 (LSCMx) (0.1 ≤ x ≤ 0.4). The powders were synthesized using a modified Pechini sol–gel method, and the ceramic samples were densified using a reactive sintering method resulting in densities >96% theoretical. X-ray photoelectron spectroscopy (XPS) was completed to characterize the defect states and cationic valence compensation as a result of divalent (Ca 2+ or Sr 2+ ) and trivalent (Mn 3+ ) substitutions. XPS was completed for samples tested in oxidizing and reducing atmospheres (up to 1500 °C), which provided insights into the oxidation state transitions induced by the Ca 2+ and Sr 2+ dopants. The work notably demonstrated, for the first time, the oxidation/reduction transitions of Cr 4+ to Cr 3+ in Sr 2+ /Mn 3+ co-doped samples under reducing atmospheres. Reflectance UV–vis spectrophotometry optical band gap measurements were also completed for the same materials; a decrease in the optical band gap (2.81–3.12 eV) was shown with increased substitution, suggesting electronic structure modifications in the LaCrO 3 perovskite. Density functional theory calculations validated experimental trends, predicting a diminishing band gap with a rising dopant concentration. The transition in Cr oxidation states was attributed to the presence of divalent/trivalent cations. These findings contribute some insights into methods to tune the LaCrO 3 electrical properties for various low- and high-temperature applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multinonmetal-Doped V 2 O 5 Nanocomposites for Lithium-Ion Battery Cathodes

Lithium-ion batteries (LIBs) are critical for portable electronics and electric vehicles, demanding higher energy density to meet increasing energy storage needs. Current commercial cathode materials, such as LiFePO 4 and LiCoO 2 , are limited by a single electron transfer, restricting their energy density. Vanadium pentoxide (V 2 O 5 ) emerges as a promising high-capacity cathode due to its high theoretical capacity of 443 mA h g –1 with three Li storage capacities, significantly surpassing conventional materials. However, the practical application of V 2 O 5 is hindered by a large structural evolution and rapid capacity fading during full lithium intercalation. Here, this study introduces a multinonmetal doping (MNM) strategy to enhance V 2 O 5 cathodes by incorporating all-nonmetal dopants (B, P, and Si) and graphene (G). MNM-V 2 O 5 -G exhibits increased surface oxygen defects, improving charge transfer kinetics and thus enhancing the rate performance and cycling stability. Our results provide valuable insights into the role of surface oxygen defects in stabilizing V 2 O 5 with element doping. This research highlights the potential of multinonmetal doping to improve LIB cathode materials, offering a promising pathway for design of high-energy-density V 2 O 5 cathodes and advancing the development of next-generation energy storage solutions.

25 ENERGY STORAGE↗
DOE OSTI2025

Coupling of Nondegenerate Topological Modes in Nitrogen Core-Doped Graphene Nanoribbons

Nitrogen core-doping of graphene nanoribbons (GNRs) allows trigonal planar carbon atoms along the backbone of GNRs to be substituted by higher-valency nitrogen atoms. The excess valence electrons are injected into the π-orbital system of the GNR, thereby changing not only its electronic occupation but also its topological properties. We have observed this topological change by synthesizing dilute nitrogen core-doped armchair GNRs with a width of five atoms (N 2 -5-AGNRs). The incorporation of pairs of trigonal planar nitrogen atoms results in the emergence of topological boundary states at the interface between doped and undoped segments of the GNR. These topological boundary states are offset in energy by approximately ΔE = 300 meV relative to the topological end states at the termini of finite 5-AGNRs. Scanning tunneling microscopy (STM) and spectroscopy (STS) reveal that for finite GNRs the two types of topological states can interact through a linear combination of orbitals, resulting in a pair of asymmetric hybridized states. This behavior is captured by an effective Hamiltonian of nondegenerate diatomic molecules, where the analogous interatomic hybridization interaction strength is tuned by the distance between GNR topological modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dynamic Behavior of Bound Interlayer Excitons in Interlayer-Doped Cs 3 Bi 2 Br 9 Vacancy-Ordered Perovskite

Interlayer doping of the vacancy-ordered 2D perovskite Cs 3 Bi 2 Br 9 (CBB) enables the formation of bound interlayer excitons (BIEs), a unique charge-transfer excited state within the layered solid. BIEs previously reported with silver (Ag + ) as an interlayer dopant exhibited bright broadband photoluminescence (PL) with prolonged lifetime at room temperature, offering potential applications in efficient white light emission, photocatalysis, and optoelectronics. However, the dynamic behavior of radiation and excited carriers remains poorly understood due to the limitations of ensemble spectroscopic measurements. Here, we investigate the temperature-dependent dynamics of Ag-doped Cs 3 Bi 2 Br 9 (Ag-CBB) using single-particle time-resolved PL spectroscopy and ultrafast transient absorption imaging. Single-particle PL measurements reveal three distinct emission regimes across temperature: (i) BIE-dominant emission at high temperatures, (ii) a mixture of radiation from BIEs and self-trapped excitons (STEs) at intermediate temperatures, and (iii) STE-dominant emission below 100 K. Rapid transient absorption mapping using Parallel Rapid Imaging with Spectroscopic Mapping (PRISM) reveals subpicosecond STE formation in pristine CBB and long-lived photoinduced absorption by BIEs, consistent with electron–hole separation and suppressed STE transfer. The spatial uniformity of these signals confirms homogeneous Ag doping across single crystals. These findings highlight the role of Ag interlayer dopants in governing the BIE dynamics.

bound interlayer exciton↗
DOE OSTI2026

Nitrogen p-type doping in polycrystalline zinc selenide telluride films

Nitrogen-doped zinc selenide telluride (N:ZnSe x Te 1−x ) is of interest because it is one of the widest-gap II–VI semiconductors that can still be doped p-type with reasonably high hole concentrations. We sputter deposit N:ZnSe x Te 1−x films, varying Se/(Se + Te), or x, from 0 to 0.7, N 2 flow rate from 0.25 to 0.75 sccm, and substrate temperature from 250 to 370 °C. Increasing x from 0 to 0.39 at the optimal temperature of 370 °C and N 2 flow rate of 0.5 sccm leads to 1.3 atomic % nitrogen incorporation and wurtzite phase stabilization. Such doping and alloying increases hole concentration from 3 × 10 18 cm −3 to 3 × 10 19 cm −3 , although mobility drops from 0.4 to 0.02 cm 2 V −1 s −1 . Our sputtered N:ZnSe 0.38 Te 0.62 has an absorption onset 0.1 eV greater than the ZnTe value of 1.87 eV. Increasing x from 0 to 0.51 enhances transmittance by moving absorption onset from 1.87 to 2.11 eV with diminished band gap bowing likely due to disorder, and increases the work function from 5.12 to 5.42 eV. This combination of tunable properties makes sputtered N:ZnSe x Te 1−x desirable for transparent p-type contacts in polycrystalline Cd(Se,Te) optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optical and microstructural studies of erbium-doped TiO 2 thin films on silicon, SrTiO 3 , and sapphire

Rare-earth ion doped oxide thin films integrated on silicon substrates provide a route toward scalable, chip-scale platforms for quantum coherent devices. Erbium-doped TiO 2 is an attractive candidate: the Er 3+ optical transition is compatible with C-band optical fiber communications, while TiO 2 is an insulating dielectric compatible with silicon process technology. Through structural and optical studies of Er-doped TiO 2 thin films grown via molecular beam deposition on silicon, SrTiO 3 , and sapphire substrates, we have explored the impact of polycrystallinity and microstructure on the optical properties of the Er emission. Comparing polycrystalline TiO 2 (rutile)/Si with single-crystalline TiO 2 (rutile)/r-sapphire and polycrystalline TiO 2 (anatase)/Si with single-crystalline TiO 2 (anatase)/SrTiO 3 , we observe that the inhomogeneous linewidth (Γ inh ) of the most prominent peak in the Er spectrum (the Y 1 –Z 1 transition, 1520 and 1533 nm in rutile and anatase TiO 2 ) is significantly narrower in the polycrystalline case. This implies a relative insensitivity to extended structural defects and grain boundaries in such films (as opposed to, e.g., point defects). We show that the growth of an undoped, underlying TiO 2 buffer on Si can reduce Γ inh by a factor of 4–5. Expectedly, Γ inh also reduces with decreasing Er concentrations: we observe a ∼2 order of magnitude reduction from ∼1000 ppm Er to ∼10 ppm Er. Γ inh then gets limited to a residual value of ∼5 GHz that is insensitive to further reduction in the Er concentration. Based upon the above results, we argue that the optical properties in these thin films are limited by the presence of high “grown-in” point defect concentrations.

Chemical elements↗
DOE OSTI2024

The role of the dopant in the electronic structure of erbium-doped TiO 2 for quantum emitters

Erbium-doped TiO 2 materials are promising candidates for advancing quantum technologies, necessitating a thorough understanding of their electronic and crystal structures to tailor their properties and enhance coherence times. This study explored epitaxial erbium-doped rutile TiO 2 films deposited on r-sapphire substrates using molecular beam epitaxy. Photoluminescence excitation spectroscopy demonstrated decreasing photoluminescence lifetimes with erbium doping, indicating limited optical coherence times. Lattice distortions associated with Er 3+ were probed by x-ray absorption spectroscopy, indicating that erbium primarily occupies Ti 4+ sites and influences oxygen vacancies. Significant lattice distortions in the higher-order shells and apparent full coordination around erbium suggest that additional defects are likely prevalent in these regions. These findings indicate that defects contribute to limited coherence times by introducing alternative decay pathways, leading to shorter photoluminescence lifetimes.

Crystallographic defects↗
DOE OSTI2025

High dopant activation in arsenic doped single-crystal CdTe thin films: Insights from MBE growth and rapid thermal processing

Single-crystal model systems are valuable tools to investigate fundamental material properties. In this work, we use molecular beam epitaxy to deposit in situ arsenic (As) doped single-crystal CdTe films on large area Si substrates to better understand As doping for photovoltaic applications. We found that As incorporation is highly temperature dependent: a substrate temperature difference of 50 °C can lead to several orders of magnitude difference in As concentration. Cd overpressure during in situ doping may limit out-diffusion of As but decrease As incorporation, especially at lower growth temperatures. Carrier concentrations greater than 10 16 cm −3 can be achieved with or without Cd overpressure when annealed at temperatures above 500 °C. However, unlike the low (∼1% to 5%) dopant activation commonly observed in polycrystalline CdTe, our films achieve significantly higher activation ratios—exceeding 50%, and in some cases approaching 80%. These values are consistent with or exceed prior reports in single-crystal CdTe systems. In addition to as-deposited arsenic concentrations, we also consider arsenic distribution after different rapid thermal processing temperatures. We propose a detailed definition and description of how arsenic incorporation is considered and calculated. Due to carrier concentration saturation, As incorporation also needs to be controlled to average levels of 10 17 cm −3 to achieve high activation. These findings suggest that higher annealing temperature regimes may be beneficial to polycrystalline CdTe based PV devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stability, growth, and doping of In 2 (Si, Ge) 2 O 7 : Promising n -type wide-bandgap semiconductors

In this paper, we investigate, computationally and experimentally, the phase stability, electronic structure properties, and the propensity for n-type doping of In 2 X 2 O 7 (X = Si, Ge) ternary oxides. This family of materials contains promising novel wide-gap semiconductors based on their estimated high n-type Baliga figures of merit and acceptable thermal conductivity for power electronics applications. Here, we predict that both In 2 Si 2 O 7 and In 2 Ge 2 O 7 are n-type dopable, with Zr providing between 10 16 and above 10 21 cm −3 net donor concentrations under O-poor conditions, depending on the chemistry, structure (ground-state thortveitite or high-pressure pyrochlore), and synthesis temperature. To verify our predictions, we synthesize Zr-doped In 2 Ge 2 O 7 in the thortveitite structure and measure its electrical properties. Initial thin-film growth and annealing lead to polycrystalline thin films with bandgaps over 4 eV and confirm Zr doping predictions by achieving electron concentrations at 10 14 –10 16 cm −3 even under O-rich conditions. While future epitaxial growth development is still needed, this study establishes In 2 X 2 O 7 as promising n-type wide-gap semiconductors for power electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Gas electroluminescence in a dual phase xenon-doped argon detector

Noble element detectors using argon or xenon as the detection medium are widely used in the searches for rare neutrino and dark matter interactions. Xenon doping in liquid argon can preserve attractive properties of an argon target while enhancing the detectable signals with properties of xenon. Here, in this work, we deployed a dual-phase liquid argon detector with up to 4% xenon doping in the liquid and studied its gas electroluminescence properties as a function of xenon concentration. At ∼2% xenon doping in liquid argon, we measured ∼34 ppm of xenon in the gas and observed ∼2.5 times larger electroluminescence signals using vacuum ultraviolet silicon photomultipliers than those in pure argon. Analysis of signals of different wavelengths confirms that the argon gas electroluminescence process is strongly modified by the addition of xenon. We propose an analytical model to describe the underlying energy transfer mechanism in argon-xenon gas mixtures. Lastly, the implications of this measurement for low-energy ionization signal detection will be discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Random-exchange Heisenberg behavior in the electron-doped quasi-one-dimensional spin-1 chain compound AgVP 2 ⁢S 6

Recent theoretical work suggests that a pair-density wave superconducting state can be realized by doping a one-dimensional spin-1 chain. Here, we report the physical properties of single crystals of Mg x Ag 1–x VP 2 S 6 [x = 0, x = 0.017(6), x = 0.067(8), and 0.098(11)] prepared by solid-state synthesis. Single-crystal x-ray-diffraction measurements confirm that Mg 2+ is substituting for Ag + to electron dope the V 3+ zigzag chains. Magnetization measurements reveal that electron doping breaks up the V 3+ chains, resulting in unpaired spins at the chain ends. The Mg x Ag 1–x VP 2 S 6 series is consistent with random-exchange Heisenberg antiferromagnetic chain behavior and can be well described by the exchange-coupled pair model at low temperatures. As a result, transport measurements show Mg x Ag 1–x VP 2 S 6 remains insulating in the range 0 ≤ x ≤ 0.098(11), with the band gap decreasing to ~ 0.2 eV at x = 0.098(11).

1-dimensional spin chains↗
DOE OSTI2026

Assessment of rare earth element fractionation in NIF implosions with radiochemically doped capsules

An ongoing experimental campaign at the National Ignition Facility (NIF) aims to measure neutron induced nuclear reaction cross–sections using radiochemically doped target capsules. Critical to this campaign is the ability to collect a representative sample of the reaction products using Solid Radiochemical Collectors (SRCs) fielded around the NIF chamber. The shot presented in this paper used a doped target capsule with a neopentane gas fill was to investigate the ratio of isotopes collected at three chamber angles. It was found that SRC samples of rare earth elements collected from NIF are representative of the ingoing dopant mix, thereby concluding that fractionation does not occur during a NIF implosion. This validates the doped capsule method for use in measuring neutron induced reaction cross-sections.

Capsule Doping↗
DOE OSTI2024

First Principles Study of Aluminum Doped Polycrystalline Silicon as a Potential Anode Candidate in Li‐ion Batteries

Addressing sustainable energy storage remains crucial for transitioning to renewable sources. While Li‐ion batteries have made significant contributions, enhancing their capacity through alternative materials remains a key challenge. Micro‐sized silicon is a promising anode material due to its tenfold higher theoretical capacity compared to conventional graphite. However, its substantial volumetric expansion during cycling impedes practical application due to mechanical failure and rapid capacity fading. A novel approach is proposed to mitigate this issue by incorporating trace amounts of aluminum into the micro‐sized silicon electrode using ball milling. Density functional theory (DFT) is employed to establish a theoretical framework elucidating how grain boundary sliding, a key mechanism involved in preventing mechanical failure is facilitated by the presence of trace aluminum at grain boundaries. This, in turn, reduces stress accumulation within the material, reducing the likelihood of failure. To validate the theoretical predictions, capacity retention experiments are conducted on undoped and Al‐doped micro‐sized silicon samples. In conclusion, the results demonstrate significantly reduced capacity fading in the doped sample, corroborating the theoretical framework and showcasing the potential of aluminum doping for improved Li‐ion battery performance.

25 ENERGY STORAGE↗
DOE OSTI2026

Engineering Na‐Rich P2‐Type Layered Oxides Through Li/Ti Dual Doping for Oxygen Redox Activation and Superior Structural Stability

Sodium layered oxides Na x MO 2 (x ≤ 1 and M = transition metal ions) have gained significant interest as sodium-ion battery (NIB) cathodes owing to their high operating voltages and potential for higher energy density compared with polyanion and Prussian blue–type cathodes. However, their practical applications are often hindered by the irreversible structural transitions leading to capacity fading during cycling. The nature and substitution of transition metal ions define the material properties and electrochemical performance. In this study, through comprehensive electrochemical characterization combined with multi-scale structural and spectroscopical analyses, we demonstrate the synergistic impacts of Lithium and Titanium doping, which not only increases overall capacity by boosting cation and anion cooperative redox contributions but also improves the rate capability and cycling stability. Specifically, Li + doping enhances the available sodium inventory for extraction, while Ti 4+ disrupts Na + /vacancy ordering at lower voltages (< 4 V) and mitigates the detrimental P2→OP4/O2 phase transition during cycling. The combined effect of Lithium and Titanium doping promotes more charge localization on Oxygen, which activates reversible lattice oxygen redox reactions at elevated voltages, contributing additional capacity beyond conventional cationic redox. This work provides crucial insights into the design of high-performance, high-capacity P2-type layered cathode materials for sodium-ion batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

P‐Doping Modulated RuIr Nanoparticles Anchored on Co/N/C Catalysts with Improved Alkaline Hydrogen Evolution Activity and Stability

Achieving efficient and stable hydrogen evolution reactions in alkaline conditions is crucial for hydrogen production. In this study, a RuIr/Co (SA) NC-P catalyst featuring RuIr alloys alongside P-doping and CoNx sites is developed. RuIr alloying optimizes the electronic structure between Ru and Ir, promoting electron transfer from Ru to Ir. P-doping further modulates the electronic properties of RuIr alloys, optimizing hydrogen binding energy and weakening Ru─OH binding energy, facilitating rapid H 2 generation and OH ad transfer. Meanwhile, CoNx promotes water dissociation, providing a fast proton delivery path for RuIr alloys. The catalyst exhibits enhanced HER activity with a low overpotential of 20 mV at 10 mA cm −2 , a Tafel slope of 20.4 mV dec −1 , and a turnover frequency of 19.5 H 2 s −1 at 150 mV overpotential. Moreover, catalyst stability is improved 8 times by mitigating RuIr alloy dissolution/agglomeration via P-doping. In conclusion, this work introduces a promising approach for developing efficient and stable HER electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Elucidating grain boundary energy minimization mechanisms in textured Ca-doped alumina with inclination-dependent Monte Carlo Potts simulations

The grain growth behavior of textured Ca-doped alumina is compared to Monte Carlo Potts (MCP) simulations to investigate the effect of anisotropic grain boundary (GB) properties on local boundary migration. Experimentally, the growth of textured Ca-doped alumina results in highly elongated grains. The relative GB energy distribution is measured using the thermal groove method before and after heat treating at 1600°C, finding that high energy GBs are eliminated during grain growth. No significant difference in the GB energy distributions is found between the long and short axes of the elongated grains, suggesting that anisotropic mobility may be responsible for the grain shape. However, MCP simulations with anisotropic mobility as a function of plane inclination do not result in grains with distinct morphologies, regardless of the degree of anisotropy introduced. The final grain shape after grain growth of textured Ca-doped alumina resembles that of the MCP simulations using an anisotropic GB energy as a cosine function of plane inclination. Several energy functions are tested and only those that mathematically impose a torque (second derivative of energy with respect to the plane inclination angle) result in elongated grains. Although area reduction is the dominant energy minimization mechanism, these results suggest that local GB migration is affected by anisotropic GB energy and torque and alternative mechanisms like GB replacement and reorientation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental confirmation of first-principles thermal conductivity in Zirconium-doped ThO 2

The degradation of thermal conductivity in advanced nuclear fuels due to the accumulation of fission products and irradiation-induced defects is inevitable, and must be considered as part of safety and efficiency analyses of nuclear reactors. Here, this study examines the thermal conductivity of a zirconium-doped ThO 2 crystal, synthesized via the hydrothermal method using a spatial domain thermoreflectance technique. Zirconium is one of the soluble fission products in oxide fuels that can effectively scatter heat-carrying phonons in the crystalline lattice of fuel. Thus, thermal property measurements of zirconium-doped ThO 2 single crystals provide insights into the effects of substitutional zirconium doping, isolated from extrinsic factors such as grain boundary scattering. The experimental results are compared with first-principles calculations of the lattice thermal conductivity of ThO 2 , employing an iterative solution of the Peierls-Boltzmann transport equation. Additionally, the non-perturbative Green's function methodology is utilized to compute phonon-point defect scattering rates, accounting for local distortions around point defects, including mass difference changes, interatomic force constants, and structural relaxation. The congruence between the predicted results from first-principles calculations and the measured temperature-dependent thermal conductivity validates the computational methodology. Furthermore, the methodologies employed in this study enable systematic investigations of thermal conductivity reduction by fission products, potentially leading to the development of more accurate fuel performance codes.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Modeling and design of a separate effects irradiation test targeting fission gas release from Cr-doped UO 2

Fission gas release (FGR) from nuclear fuel during operation can diminish heat transfer properties across the pellet-cladding gap and increase the fuel rod internal pressure, thereby posing a concern to fuel reliability and safety during an accident. Enlarging the fuel grain size, which has been shown to improve fission gas retention, can be achieved by doping the fuel feedstock prior to sintering. In this work, the BISON fuel performance code was used to predict FGR from undoped and chromia-doped UO 2 (referred to as Cr-doped UO 2 ) fuel specimens with different grain sizes and across various temperatures. The BISON models identified the irradiation conditions for which FGR is most significant, and a separate effects irradiation experiment in the High Flux Isotope Reactor (HFIR) was then developed targeting those conditions. Further, the experiment leveraged the MiniFuel irradiation capability at Oak Ridge National Laboratory and consisted of 12 fuel specimens of varying grain size and Cr content. A coupling scheme between BISON FGR results and the ANSYS finite element thermal model used for experiment design was formulated to predict cumulative FGR from each fuel specimen based on expected irradiation temperature histories. The fuel samples were fabricated and characterized as a part of this work, and the fuel compositions modeled in BISON were representative of the specimens used in the experiment. This combined modeling and experimental effort aims to study the effect of fuel grain size and Cr content on FGR and to provide simulated BISON FGR results that can be used for future model validation activities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗