Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dimensional changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Calculation of shocked one-dimensional flows on abruptly changing grids by mathematical programming

Cell-centered finite differences on cells of an arbitrarily spaced grid are presently used to discretize the steady-state inviscid and nearly inviscid Burgers' equations for steady-state shocked flow in a quasi-one-dimensional nozzle. The everdetermined system of nonlinear algebraic equations thus obtained is solved by a procedure which minimizes a weighted sum of the residuals' absolute values. Numerical solutions for both viscous and inviscid problems are accurate and nonoscillatory, on grids whose abrupt mesh lengths refinements are as great as a factor of 10,000.

Lavery, John E.↗
NASA NTRS1974

Computer program for quasi-one-dimensional compressible flow with area change and friction - Application to gas film seals

A computer program is presented for compressible fluid flow with friction and area change. The program carries out a quasi-one-dimensional flow analysis which is valid for laminar and turbulent flows under both subsonic and choked flow conditions. The program was written to be applied to gas film seals. The area-change analysis should prove useful for choked flow conditions with small mean thickness, as well as for face seals where radial area change is significant. The program is written in FORTRAN 4.

Zuk, J.↗
NASA NTRS1992

Analysis of two-dimensional ducts with sudden area changes using the boundary element method

In this paper, the boundary element method (BEM) is applied to two-dimensional acoustic ducts with sudden area changes. The mathematical basis of BEM along with the technique of handling singularities is presented in a systematic manner. The computer code is verified by comparison with the exact solutions and a number of illustrative examples are included.

Pates, Carl S., III↗
NASA NTRS1984

Long life nickel electrodes for a nickel-hydrogen cell. III - Results of an accelerated test and failure analyses

Nineteen different designs of nickel electrodes were tested in Ni/H2 boiler plate cells in an accelerated low earth orbit cycle regime to the end of their life. The failure analyses of these cells showed that the major performance changes due to the cycling was a severe reduction of their high rate discharge capability rather than an absolute capacity reduction. Many physical changes of the nickel electrodes were observed after the cycling test. These changes include dimensional expansion, sinter rupture, loose black powdering of the active material, morphology changes, active material migration, increase of pore volume, change of pore distribution, and increase of surface area. All of these were caused by active material expansion with cycling. Among these changes, the morphology change which involves migration of active material away from the current collecting nickel sinter appears to be that most responsible for the reduction of the rate capability.

Lim, H. S.↗
NASA NTRS1993

Effects of small changes in initial conditions on mixing layer three-dimensionality

The effects of relatively small changes in the initial conditions of the development of the 3D structure of a plane mixing layer originating from laminar boundary layers were experimentally studied. It is found that, while the exact shapes and positions of the streamwise vortex structures are not the same for the two initial conditions, their overall distribution, reorganization, and decay are very similar. The results likely that while some of the specific details of the streamwise vortex structure may be facility-dependent, a relatively strong structure which produces significant three-dimensionality should form in all mixing layers originating from laminar boundary layers. After some initial readjustments, the structure will appear in the form of counterrotating pairs of streamwise vortices which in the mean, grow with the mixing layer and decay in strength. The results also serve to warn that small changes in initial conditions may significantly affect the Reynolds stress distributions in the near field.

Plesniak, M. W.↗
NASA NTRS1975

An analysis of space environment effects on performance and missions of a Solar Electric Propulsion Stage (SEPS)

The development of an analysis which addresses the problems of degrading space environmental effects on the performance and missions of a Solar Electric Propulsion Stage (SEPS) is reported. A detailed study concerning the degrading effects of the Van Allen Belt charged-particle radiation on specific spacecraft subsystems is included, along with some of the thermal problems caused by electromagnetic radiation from the sun. The analytical methods used require the integration of two distinct analyses. The first, is a low-thrust trajectory analysis which uses analytical approximations to optimum steering for orbit raising, including three-dimensional plane change cases. The second is the conversion of the Vette time-averaged differential energy spectra for protons and electrons into a 1-MeV electron equivalent environment as a function of spatial position and thickness of various shielding materials and solar-cell cover slides.

Mcglathery, D. M.↗
NASA NTRS1986

The heliospheric current sheet - 3-dimensional structure and solar cycle changes

The reversal in polarity of the interplanetary current sheet/sector structure is investigated during the recent solar maximum. Multipoint observations by ISEE-3 and Pioneer 11 show that a simple two sector or occasional four sector structure persisted throughout the maximum and out to distances of 10 AU. The polarity reversal occurred between March 1979 and October 1980, without any indication of an abrupt transition that might permit a more precise timing. The reversal coincided approximately with the reversal in the sun's polar cap fields. The current sheet appeared to be highly inclined during the ascending and descending phases of the solar cycle but was apparently too complex to describe as a simple inclined current sheet during solar maximum.

Smith, E. J.↗
NASA NTRS1994

Pool and flow boiling in variable and microgravity

As is well known, boiling is an effective mode of heat transfer in that high heat flux levels are possible with relatively small temperature differences. Its optimal application requires that the process be adequately understood. A measure of the understanding of any physical event lies in the ability to predict its behavior in terms of the relevant parameters. Despite many years of research the predictability of boiling is currently possible only for quite specialized circumstances, e.g., the critical heat flux and film boiling for the pool boiling case, and then only with special geometries. Variable gravity down to microgravity provides the opportunity to test this understanding, but possibly more important, by changing the dimensional and time scales involved permits more detailed observations of elements involved in the boiling process, and perhaps discloses phenomena heretofore unknown. The focus here is on nucleate boiling although, as will be demonstrated below, under but certain circumstances in microgravity it can take place concurrently with the dryout process. In the presence of earth gravity or forced convection effects, the latter process is usually referred to as film boiling. However, no vapor film as such forms with pool boiling in microgravity, only dryout. Initial results are presented here for pool boiling in microgravity, and were made possible at such an early date by the availability of the Get-Away-Specials (GAS). Also presented here are some results of ground testing of a flow loop for the study of low velocity boiling, eventually to take place also in microgravity. In the interim, variable buoyancy normal to the heater surface is achieved by rotation of the entire loop relative to earth gravity. Of course, this is at the expense of varying the buoyancy parallel to the heater surface. Two questions which must be resolved early in the study of flow boiling in microgravity are (1) the lower limits of liquid flow velocity where buoyancy effects become significant to the boiling process (2) the effect of lower liquid flow velocities on the Critical Heat Flux when buoyancy is removed. Results of initial efforts in these directions are presented, albeit restricted currently to the ever present earth gravity.

Merte, Herman, Jr.↗
NASA NTRS2010

Characterizing Methods of Measuring Flow-Mediated Dilation in the Brachial Artery

Regulation of vascular tone is one of the many important functions of the vascular endothelium. Endothelial dysfunction is a critical early event in the pathogenesis of atherosclerosis and occurs in the absence of angiographic disease. Flow-Mediated Dilation (FMD) is a noninvasive technique commonly used to evaluate endothelium-dependent vasodilation in humans and gauge the health of the cardiovascular system. Reductions in brachial artery FMD have been strongly correlated with disease progression and are predictive of future cardiac events. The flow stimulus for brachial artery FMD occurs as a result of the increased shear stress following deflation of an occlusion cuff around the upper arm. Using 2-dimensional ultrasound, changes in arterial diameter up to 5-minutes following cuff deflation are calculated from baseline image measurements. Along with pulsed Doppler measures of flow velocity through the artery, flow-mediated, endothelium-dependent vasodilation can be assessed. There is debate among investigators, however, about the proper positioning of the occlusion cuff during FMD testing. It is thought that placement of the cuff around the upper arm may not accurately reflect the impact of nitric oxide, a critically important molecule released as a result of the increased shear stress created by the FMD technique. Data suggest that the production of other endogenous metabolites may also contribute to FMD-related changes when positioning the cuff around the upper arm. To overcome the potential influence of such molecules, researchers now suggest that the occlusion cuff be placed below the elbow allowing a more precise estimate of nitric oxide mediated dilation. The purpose of this study is to compare the differences in FMD between the two methodologies of occlusion cuff placement. In addition, this study will determine the method that is easier for ultrasound technicians to perform and will produce a low coefficient of variance between technicians. Ultimately, the results of this study will help in tracking any adverse cardiovascular effects of spaceflight.

Callender, Ariane R.↗
NASA NTRS1990

A numerical method for phase-change problems

A highly accurate and efficient finite-difference method for phase-change problems with multiple moving boundaries of irregular shape is developed by employing a coordinate transformation that immobilizes moving boundaries and preserves the conservative forms of the original governing equations. The numerical method is first presented for one-dimensional phase-change problems (involving large density variation between phases, heat generation, and multiple moving boundaries) and then extended to solve two-dimensional problems (without change of densities between phases). Numerical solutions are obtained non-iteratively using an explicit treatment of the interfacial mass and energy balances and an implicit treatment of the temperature field equations. The accuracy and flexibility of the present numerical method are verified by solving some phase-change problems and comparing the results with existing analytical, semi-analytical and numerical solutions. Results indicate that one- and two-dimensional phase-change problems can be handled easily with excellent accuracies.

Kim, Charn-Jung↗
NASA NTRS1987

Enhancements to Program LAURA for computation of three-dimensional hypersonic flow

Changes to Program Laura (Langley Aerothermodynamic Upwind Relaxation Algorithm) are presented which enhance both stability and accuracy of the algorithm. A discussion of iteration/sweeping strategies and their relation to computer architectures is included to best exploit the capabilities of serial, vector, and parallel processor machines. Test cases for Mach 10 perfect gas flow and Mach 32 real gas flow in chemical nonequilibrium over a blunt, raked elliptic cone using the thin-layer Navier-Stokes equations are presented in order to demonstrate the current improved capabilities. Algorithm changes include the use of volume averaging, application of a symmetric total variation diminishing (TVD) scheme, and stronger interaction between the grid/shock alignment routine and the relaxation algorithm. Good comparisons with heat transfer and pitching moment data at three different angles of attack for the Mach 10 tests serve to further validate the present algorithm. Parameters are defined which control the coupling of the specie continuity equations with the solution of the mixture conservation equations. A discussion of the consequences involved in the choice of strong versus weak coupling is presented, and a sample nonequilibrium calculation on a fine grid over a full scale model of the Aeroassist Flight Experiment (AFE) demonstrates current capabilities.

Gnoffo, Peter A.↗
NASA NTRS1989

Filamentary structure of a three-dimensional plasmoid

The changes of the magnetic field topology and the field line connections are examined in detail using a simple explicit magnetic field model of a plasmoid in different stages from its formation, penetration through a separatrix connected with a distant neutral line, to its complete disconnection. It is shown that complications arise from the fact that separatrix surfaces become very complicated, folded, and filamented in the presence of a small but finite magnetic field in the reconnection region. The filamentary mixing of topologically different field lines may lead to a mixing of different plasma populations as well, and thereby possibly to a more efficient dissipation.

Birn, J.↗
NASA NTRS1982

Numerical simulation of one-dimensional heat transfer in composite bodies with phase change

A numerical simulation was developed to investigate the one dimensional heat transfer occurring in a system composed of a layered aircraft blade having an ice deposit on its surface. The finite difference representation of the heat conduction equations was done using the Crank-Nicolson implicit finite difference formulation. The simulation considers uniform or time dependent heat sources, from heaters which can be either point sources or of finite thickness. For the ice water phase change, a numerical method which approximates the latent heat effect by a large heat capacity over a small temperature interval was applied. The simulation describes the temperature profiles within the various layers of the de-icer pad, as well as the movement of the ice water interface. The simulation could also be used to predict the one dimensional temperature profiles in any composite slab having different boundary conditions.

Dewitt, K. J.↗
NASA NTRS1984

The sensitivity of a one-dimensional thermodynamic sea ice model to changes in cloudiness

A thermodynamic sea ice-lead model is used to assess the importance of cloud cover changes to modeled ice thickness. For regions of either permanent multiyear ice or seasonal sea ice, the cloud amount variations have relatively little impact. However, for regions where the presence of summer ice is variable from year to year, the predicted ice thickness is strongly dependent on cloud cover. In general, with a snow covered surface, decreased cloud leads to surface cooling while increased cloud gives rise to a surface warming. For a melting bare ice surface, the reverse occurs. The ice model response time is too long for interannual variations in cloud amount to explain interannual variations in ice thickness and extent. Nevertheless, the implication of the results is that numerical modeling of sea ice distribution requires accurate cloud data or cloud prediction and that trends in cloud cover may lead to significant perturbations in sea ice extent and thickness.

Shine, K. P.↗
NASA NTRS1992

Three-dimensional numerical simulation of interplanetary magnetic field changes at 1 AU as a consequence of simulated solar flares

In order to study the relationship between different forms of activity and transient variations of the north-south component, B(sub z), of the Interplanetary Magnetic Field (IMF), at 1 AU, a three dimensional numerical simulation code was employed to study several aspects of this problem. One form of solar activity, the flare, is simulated by using a pressure pulse at different locations near the solar surface and observing the simulated IMF evolution of B(sub theta)(-B(sub z)) at 1 AU. It was found, for a given pressure pulse, that the orientation of the corresponding transient variation of B(sub z) has a strong relationship with the location of the pressure pulse and the initial condition of IMF.

Wu, S. T.↗
NASA NTRS1980

3500-hour durability testing of ceramic materials for automotive gas turbine engines

A two-year durability program was performed by AiResearch Phoenix to evaluate four commercially available ceramic materials under simulated automotive gas turbine combustor discharge conditions. These conditions included extended cyclic thermal exposures up to 2500 F and 3500 hr. The four materials selected for evaluation were Norton NCX-34 hot pressed silicon nitride, AiResearch RBN 101 reaction bonded silicon nitride, Carborundum pressureless sintered alpha-SiC and Pure Carbon Co. (British Nuclear Fuels, Ltd.) Refel reaction sintered silicon carbide. These materials were initially exposed to 350 hr/1750 cycles at 1200 and 1370 C. Subsequent exposures to 1050, 2100 and 3500 hr were performed on those materials maintaining 50% of baseline strength after the initial exposure. Additional evaluations of exposed bars included dimensional and weight changes, dye penetrant, specific damping capacity changes, SEM fractography, and X-ray diffraction.

Carruthers, W. D.↗
NASA NTRS1980

Solar cycle changes in the polar solar wind

It is noted that although the 11 year solar cycle was first recognized in 1843, it is still only poorly understood. Further, while there are satisfactory models for the magnetic variations, the underlying physics is still obscure. New observations on the changing three-dimensional form of the solar wind are presented which help relate some of the modulations observed in geomagnetic activity, the ionosphere, and the flux of galactic cosmic rays.

Coles, W. A.↗