Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diameter distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Pentaerythritol structure-directing agents bias aluminum siting in MFI zeolites to increase para -xylene selectivity during toluene methylation

MFI zeolites contain ten-membered ring channels (∼0.55 nm diameter) that intersect to form larger voids (∼0.70 nm diameter). The distribution of framework Al sites dictates the void environments that confine active H + sites. MFI synthesized with pentaerythritol (PET) and Na + as structure-directing agents are interrogated using kinetically controlled toluene methylation rates and xylene isomer selectivities. High para-xylene selectivity and low toluene methylation rates indicate that MFI-PET samples contain H + sites predominantly in smaller channels. As-synthesized samples contain more framework Al than Na + , indicating that some charge compensation is provided by protonated PET-solvent complexes that bias Al siting towards these smaller channels.

36 MATERIALS SCIENCE↗

The pore wall structure of porous semi-crystalline anatase TiO2

The structure of porous TiO2 prepared by electrochemical anodization in a fluoride-containing ethylene glycol electrolyte solution was quantitatively studied using small angle neutron scattering (SANS) and ultra small angle neutron scattering (USANS). The cylindrical pores along the coaxial direction were somewhat irregular shape, were broadly distributed in diameter, and seemed to have a broadly pseudo-hexagonal arrangement. The scattering from the pore wall showed a negative deviation from Porod scattering, indicating the interface between TiO2 and the pore was not sharp. A density gradient of around 40 ~ 60 at the pore wall (i.e. interface between the pore and the TiO2 matrix) was estimated using both constant and semi-sigmoidal interface models. This may be due to the presence of fluorine and carbon partially absorbed by the pore wall from the fluoride-containing electrolyte and sorbed water molecules on the wall. The neutron contrast-matching point between the TiO2 matrix and the pores filled with liquid H2O/D2O mixtures was 51/49 vol/vol H2O/D2O, yielding an estimated mass density of 3.32 g/cm3. The specific surface area of the sample derived from the (U)SANS data, S/V, was around 939 ~ 1003 m2/cm3 (283~ 302m2/g).

Kim, Dr Man-Ho↗

Relating ground truth collection to model sensitivity

The importance of collecting high quality ground truth before a SAR mission over a forested area is two fold. First, the ground truth is used in the analysis and interpretation of the measured backscattering properties; second, it helps to justify the use of a scattering model to fit the measurements. Unfortunately, ground truth is often collected based on visual assessment of what is perceived to be important without regard to the mission itself. Sites are selected based on brief surveys of large areas, and the ground truth is collected by a process of selecting and grouping different scatterers. After the fact, it may turn out that some of the relevant parameters are missing. A three-layer canopy model based on the radiative transfer equations is used to determine, before hand, the relevant parameters to be collected. Detailed analysis of the contribution to scattering and attenuation of various forest components is carried out. The goal is to identify the forest parameters which most influence the backscattering as a function of frequency (P-, L-, and C-bands) and incident angle. The influence on backscattering and attenuation of branch diameters, lengths, angular distribution, and permittivity; trunk diameters, lengths, and permittivity; and needle sizes, their angular distribution, and permittivity are studied in order to maximize the efficiency of the ground truth collection efforts. Preliminary results indicate that while a scatterer may not contribute to the total backscattering, its contribution to attenuation may be significant depending on the frequency.

Amar, Faouzi↗

Asteroid size distribution - Implications for the origin of stony-iron and iron meteorites

The diameter-frequency distribution of large asteroids is analyzed, based on polarimetric and radiometric albedo data. The population of carbonaceous objects shows a high degree of fragmentation. But a class of apparently stony-iron asteroids shows a relative excess frequency between diameters of 100 to 200 km. It is proposed that the latter objects are predominantly metallic cores of a group of chemically differentiated planetesimals all of which (except Vesta) have suffered catastrophic collisions. Collision frequencies in the asteroid belt may have been much greater than previously supposed.

Chapman, C. R.↗

Empirical effective temperatures and bolometric corrections for early-type stars

An empirical effective temperature for a star can be found by measuring its apparent angular diameter and absolute flux distribution. The angular diameters of 32 bright stars in the spectral range O5f to F8 have recently been measured with the stellar interferometer at Narrabri Observatory, and their absolute flux distributions have been found by combining observations of ultraviolet flux from the Orbiting Astronomical Observatory (OAO-2) with ground-based photometry. In this paper, these data have been combined to derive empirical effective temperatures and bolometric corrections for these 32 stars.

Code, A. D.↗

Sensitivity of aerosol optical properties to the aerosol size distribution over central Europe and the Mediterranean Basin using the WRF-Chem v.3.9.1.1 coupled model

The size distribution of atmospheric aerosols plays a key role for understanding and quantifying the uncertainties related to aerosol–radiation and aerosol–cloud interactions. These interactions ultimately depend on the size distribution through optical properties (such as aerosol optical depth, AOD) or cloud microphysical properties. Hence, the main objective of this contribution is to disentangle the impact of the representation of aerosol size distribution on aerosol optical properties over central Europe, particularly over the Mediterranean Basin, during a summertime aerosol episode. To fulfill this objective, a sensitivity test has been conducted using the coupled chemistry–meteorology model WRF-Chem (Weather Research Forecast model coupled with Chemistry). The test modified the parameters defining a lognormal size distribution (geometric diameter and standard deviation) by 10 %, 20 %, and 50 %. Results reveal that the reduction in the standard deviation of the accumulation mode leads to the largest impacts on AOD due to a transfer of particles from the accumulation mode to the coarse mode. A reduction in the geometric diameter of the accumulation mode also has an influence on AOD representation since particles in this mode are assumed to be smaller. In addition, an increase in the geometric diameter of the coarse mode produces a redistribution through the total size distribution by relocating particles from the finer modes to the coarse.

54 ENVIRONMENTAL SCIENCES↗

Initial drop size and velocity distributions for airblast coaxial atomizers

Phase Doppler measurements were used to determine initial drop size and velocity distributions after a complete disintegration of coaxial liquid jets. The Sauter mean diameter (SMD) distribution was found to be strongly affected by the structure and behavior of the preceding liquid intact jet. The axial measurement stations were determined from the photographs of the coaxial liquid jet at very short distances (1-2 mm) downstream of the observed break-up locations. Minimum droplet mean velocities were found at the center, and maximum velocities were near the spray boundary. Size-velocity correlations show that the velocity of larger drops did not change with drop size. Drop rms velocity distributions have double peaks whose radial positions coincide with the maximum mean velocity gradients.

Eroglu, H.↗

Electrochemical cells with ionic sequestration provided by porous separators

Provided are electrochemical cells including separators permeable to some materials and impermeable to other materials in electrolytes. Also provide are methods of forming such separators. The selective permeability of a separator is achieved by its specific pore diameter and a narrow distribution of this diameter. Specifically, a species responsible for ion transport in an electrochemical cell are allowed to pass through the separator, while another species is blocked thereby preventing degradation of the cell. For example, a species containing lithium ions is allowed to pass in rechargeable cells, while one or more species containing transition metals are blocked. In some embodiments, a separator may include a membrane layer with at least 90% of pores of this having a diameter of between about 0.1 nanometers and 1.0 nanometer. The membrane layer may be a standalone layer or supported by a membrane support.

25 ENERGY STORAGE↗

A review of vortex structures and associated coherent motions in turbulent boundary layers

The experimental and computational evidence for the existence and role of vortices in turbulent boundary layers is briefly reviewed. Quasi-streamwise and transverse vortices are considered, and various published conceptual models for horseshoe-like vortical structures are compared. The causes for upright and inverted horseshoe-shaped vorticity lines are discussed, and the distinction between vorticity lines and vortices is demonsrated. Finally, results from a numerically-simulated turbulent boundary layer are used to compute distributions of diameter, height, and strength for quasi-streamwise and spanwise vortices. These results confirm that quasi-streamwise vortices are clustered near the wall, while spanwise vortices are distributed throughout the layer. The variation of spanwise vortex core diameter with distance from the wall is found to be consistent with the mixing-length distribution for a boundary layer.

Robinson, Stephen K.↗

Martian impact craters - Correlations of ejecta and interior morphologies with diameter, latitude, and terrain

An effort is made to establish the ability of a correlation between crater morphology and latitude, diameter, and terrain, to discriminate among the effects of impact energy, atmosphere, and subsurface volatiles in 3819 larger-than-8 km diameter craters distributed over the Martian surface. It is noted that changes in ejecta and interior morphology correlate with increases in crater diameter, and that while many of the interior structures exhibit distributions interpretable as terrain-dependent, central peak and peak ring interior morphologies exhibit minimal relationships with planetary properties.

Barlow, Nadine G.↗

The rotation of small asteroids

The Binzel and Mulholland (1983) sample of photoelectrically determined rotational parameters for 17 main belt asteroids with diameters less than 30 km are compared with previous observations of asteroids of that size range. Rigorous statistical tests are applied to investigate bias effects and quantify results on asteroid rotation. The samples are described and compared for rotational frequency, rotational amplitude, frequency distribution, and diameter and frequency dependence. It is concluded that the observed rotational frequency distribution can be acceptably fit by two Maxwellian distributions, which is consistent with the hypothesis that there are separate populations of slow and fast rotating asteroids. The frequency distributions of main belt asteroids less than 15 km in diameter and earth and Mars crossers do not differ significantly, but the larger mean lightcurve amplitude of these crossers is statistically significant. No significant diameter dependence on rotational frequency is found among the sample asteroids.

Binzel, R. P.↗

Venus - Crater distributions at low northern latitudes and in the southern hemisphere from new Arecibo observations

Arecibo high resolution radar data covering approximately 23 percent of the surface of Venus were analyzed for circular features with crater-like appearances. Overlapping Venera 15/16 radar data, with its more normal to the surface viewing geometry, was used to verify crater diameters measured from the Arecibo data. A comparison of the diameter-frequency distribution of the possible impact features in the Arecibo data for northern latitudes south of 40 deg N and for the southern hemisphere with the distribution from the Venera 15/16 data for the northernmost quarter of the planet indicated similar distributions for large crater-like features with diameters greater than approximately 30 km, but a deficiency of smaller craters in the Arecibo data. One possible process responsible for the density differences of small craters is a difference in the rate of volcanic resurfacing. An increase in the resurfacing rate of approximately 50 percent would explain the lower density of small craters in the area covered by the Arecibo data compared with the Venera data, but would not account for the differences being confined to the less than 30 km crater diameter range.

Campbell, D. B.↗

Structure–Transport Relationships of Water–Organic Solvent Co-transport in Carbon Molecular Sieve (CMS) Membranes

We explore the effects of the carbon molecular sieve (CMS) microstructure on the separation performance and transport mechanism of water–organic mixtures. Specifically, we utilize PIM-1 dense films and integrally skinned asymmetric hollow fiber membranes as polymer precursors for the CMS materials. The PIM-1 membranes were pyrolyzed under several different pyrolysis atmospheres (argon, carbon dioxide, and diluted hydrogen gas) and at multiple pyrolysis temperatures. Detailed gas physisorption measurements reveal that membranes pyrolyzed under 4% H 2 and CO 2 had broadened ultramicropore distributions (pore diameter <7 Å) compared to Ar pyrolysis, and pyrolysis under CO 2 increased ultramicropore volume and broadened micropore distributions at increased pyrolysis temperatures. Gravimetric water and p-xylene sorption and diffusion measurements reveal that the PIM-1-derived CMS materials are more hydrophilic than other CMS materials that have been previously studied, which leads to sorption-diffusion estimations showing water-selective permeation. Water permeation in the vapor phase, pervaporation, and liquid-phase hydraulic permeation reveal that the isobaric permeation modes (vapor permeation and pervaporation) are reasonably well predicted by the sorption-diffusion model, whereas the hydraulic permeation mode is significantly underpredicted (>250×). Conversely, the permeation of p-xylene is well predicted by the sorption-diffusion model in all cases. The collection of pore size analysis, vapor sorption and diffusion, and permeation in different modalities creates a picture of a combined transport mechanism in which water–under high transmembrane pressures–permeates via a Poiseuille-style mechanism, whereas p-xylene solutes in the mixture permeate via sorption-diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of CS/PVA Biodegradable Composite Nanofibers as a Microporous Material with Well Controllable Procedure Through Electrospinning

In this study, we have showed a facile route for fabrication of a novel microporous material based on chitosan (CS) and poly(vinyl alcohol) (PVA) biodegradable nanofibers that have high specific surface area, considerable porosity, and small diameter. Scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry, fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface area analysis, and CHNS/O elemental analyser were applied to characterize the fabricated CS/PVA composite nanofibers. Moreover, the influences of spinning conditions including concentration, voltage, electrospinning distance, and flow rate, on size distribution and pore diameter of the final product were systematically studied using 2{sup k−1} factorial design experiments, and the response surface optimization was used for determining the best synthesis parameter. The results obtained from 2{sup K−1} factorial design experiments showed that electrospinning parameters influenced the size distribution and pore diameter of the CS/PVA microporous material. Based on the response surface methodology, the CS/PVA product could be obtained with a high microporous diameter of 1.8 nm and a small diameter distribution of 15.0 nm under optimized conditions. The obtained results showed that the fabricated samples could be utilized in different applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Scalable synthesis and characterization of cobalt sodium tartrate nanowires with adjustable diameters

Cobalt sodium tartrate nanowires are synthesized by a simple hydrothermal method using ethanol-water mixed solvents. The smooth wires are on average 30 {mu}m long. Their diameters are narrowly size distributed with a controllable average in the range from 80 to 250 nm. Interestingly, after the initial two hours, the diameter decreases with further reaction time. The tartrate anions act as coordination ligands with all six oxygen atoms participating in the coordination. The Co{sup 2+} and Na{sup +} ions chelate with the O atoms from the carboxylate and hydroxyl groups in the tartrate ligands. The ethanol participates in the formation of pi bonds. The cobalt is divalent while the sodium is monovalent in their tartrates. The respective crystal structures of these metal tartrates are incompatible, and the wires are therefore amorphous. The influence of the reaction time, sodium tartrate concentration, pH value, and the ethanol water ratio are studied in detail. - Graphical abstract: Cobalt sodium tartrate nanowires with smooth surfaces are synthesized hydrothermally. Their narrowly distributed diameters decrease with reaction time after initial two hours and are controllable from 80 to 250 nm. Highlights: > Cobalt sodium tartrate nanowires are synthesized by a simple hydrothermal route. > Nanowires are smooth, amorphous, and up to 30 {mu}m long. > Diameters of the wires are controllable; they decrease with the reaction time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

N(50) Crater Retention Ages for an Expanded Inventory of Lunar Basins: Evidence for an Early Heavy Bombardment and a Late Heavy Bombardment?

LOLA topography and LOLA-derived crustal thickness data provide evidence for a population of impact basins on the Moon that is likely a factor 2 larger than the classical lists based on photogeology. Frey (2012) determined N(50) crater retention ages (CRAs) for 83 candidate basins > 300 km in diameter by counting LOLA-identified craters superimposed over the whole area of the basins. For some basins identified in topography or model crustal thickness it is not possible to unambiguously identify the crater rim as is traditionally done. Also, Quasi-Circular Depressions (QCDs) > 50 km in diameter are recognizable in the mare-filled centers of many basins. Even though these are not apparent in image data, they likely represent buried impact craters superimposed on the basin floor prior to mare infilling and so should be counted in determining the age of the basin. Including these as well as the entire area of the basins improves the statistics, though the error bars are still large when using only craters > 50 km in diameter. The distribution of N(50) CRAs had two distinct peaks which did not depend on whether the basins were named (based on photogeology) or recognized first in topography or crustal thickness data. It also did not depend on basin diameters (both larger and smaller basins made up both peaks) and both peaks persisted even when weaker candidates were excluded. Burgess (2012, unpublished data) redid the counts for 85 basins but improved on the earlier effort by adjusting the counting area where basins overlap. The two peak distribution of N(50) ages was confirmed, with a younger peak at N(50) ~ 40-50 and an older peak at N(50) ~ 80-90 (craters > 50 km diameter per million square km). We suggest this could represent two distinct populations of impactors on the Moon: one producing an Early Heavy Bombardment (EHB) that predates Nectaris and the second responsible for the more widely recognized Late Heavy Bombardment (LHB).

Frey, Herbert↗

Radar modeling of a boreal forest

Microwave modeling, ground truth, and SAR data are used to investigate the characteristics of forest stands. A mixed coniferous forest stand has been modeled at P, L, and C bands. Extensive measurements of ground truth and canopy geometry parameters were performed in a 200-m-square hemlock-dominated forest plot. About 10 percent of the trees were sampled to determine a distribution of diameter at breast height (DBH). Hemlock trees in the forest are modeled by characterizing tree trunks, branches, and needles as randomly oriented lossy dielectric cylinders whose area and orientation distributions are prescribed. The distorted Born approximation is used to compute the backscatter at P, L, and C bands. The theoretical results are found to be lower than the calibrated ground-truth data. The experiment and model results agree quite closely, however, when the ratios of VV to HH and HV to HH are compared.

Chauhan, Narinder S.↗

Experimental evaluation of two premixing-prevaporizing fuel injection concepts for a gas turbine catalytic combustor

A premixing-prevaporizing fuel system to be used with a catalytic combustor was evaluated for possible application in an automotive gas turbine. Spatial fuel distribution and degree of vaporization were measured using jet A fuel. Two types of air blast injectors were tested, a splash groove injector and a multiple jet cross stream injector. Air swirlers with vane angles of 15 deg and 30 deg were used to improve the spatial fuel distribution in a 12 cm diameter tubular rig. Distribution and vaporization measurements were made 35.5 cm downstream of the injector. The spatial fuel distribution was nearly uniform with the multiple jet contrastream injector and the splash-groove injector with a 30 deg air swirler. The vaporization was nearly 100 percent at an inlet air temperature of 600 K, and at 800 K inlet air temperature fuel oxidation reactions were observed. The total pressure loss was less than 0.5 percent of the total pressure for the multiple jet cross stream injector and the splash groove injector (without air swirler) and less than 1 percent for the splash groove with a 30 deg air swirler.

Tacina, R.↗