Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “delta wings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

A vortex-lattice method for the calculation of the nonsteady separated flow over delta wings

An analysis is made of the wake structure and the forces on a delta wing as it undergoes nonsteady motion, wherein the flow separates at the leading edge. Comparisons of these predictions with existing experimental and theoretical data for the nonsteady linear and nonlinear motions indicate good agreement. It was found that the time-dependent, wake-shedding numerical procedure applied here for the wake rollup and the lift force calculation resulted in considerable saving of computer time over methods using the iterative wake rollup procedure. Calculated results for various motions of the delta wing, including the plunging motion, are presented for both the separated and the attached flow cases.

Levin, D.↗
NASA NTRS1960

A Note on the Drag Due to Lift of Delta Wings at Mach Numbers up to 2.0

In order to indicate the effects of Reynolds number and other variables on the drag due to lift of delta wings for Mach numbers up to 2.0, the results of several investigations of wing-body combinations having plane delta wings with aspect ratios from 2 to 4 have been assembled for comparison and brief analysis. The effects of Reynolds number, leading-edge radius, and thickness ratio could generally be correlated with Reynolds number based on the leading-edge radius as a parameter. The effects of leading-edge Reynolds number on drag due to lift were large at Mach numbers less than 0.25. However, with increases in Mach number, the effects decreased and were almost negligible at a Mach number of 2.0. and trimming were large, as would be expected. The effects of aspect ratio and trimming were large, as would be expected. It was indicated at least for subsonic and transonic speeds that improvement in the drag due to lift might be obtained from wing modifications designed to inhibit flow separation.

Robert S. Osborne↗
NASA NTRS1990

Detailed flow-field measurements over a 75 deg swept delta wing

Results from an experimental investigation documenting the flowfield over a 75 deg swept delta wing at an angle-of-attack of 20.5 deg are presented. Results obtained include surface flow visualization, off-body flow visualization, and detailed flowfield surveys for various Reynolds numbers. Flowfield surveys at Reynolds numbers of 0.5, 1.0, and 1.5 million based on the root chord were conducted with both a Pitot pressure probe and a 5-hole pressure probe; and 3-component laser velocimeter surveys were conducted at a Reynolds number of 1.0 million. The Pitot pressure surveys were obtained at 5 chordwise stations, the 5-hole probe surveys were obtained at 3 chordwise stations and the laser velocimeter surveys were obtained at one station. The results confirm the classical roll up of the flow into a pair of primary vortices over the delta wing. The velocity measurements indicate that Reynolds number has little effect on the global structure of the flowfield for the Reynolds number range investigated. Measurements of the non-dimensional axial velocity in the core of the vortex indicate a jet like flow with values greater than twice freestream. Comparisons between velocity measurements from the 5-hole pressure probe and the laser velocimeter indicate that the pressure probe does a reasonable job of measuring the flowfield quantities where the velocity gradients in the flowfield are low.

Kjelgaard, Scott O.↗
NASA NTRS1985

An experimental investigation of apex fence flaps on delta wings

The effects on leading edge vortex formation produced by apex fences mounted on two delta wings were examined in a subsonic wind tunnel. Pressure data were collected on the upper surface of the test wings and oil flow and bubble flow visualizations were performed. The deflections studied were 74, 90 and 65 deg in one-sided and two-sided configurations. Full span and semi-span delta wing planforms were used. Relatively small, symmetrically deployed apex fences provided enhanced upper surface suction which, in some angle-of-attack situations, could lead to a pitch-up force. Asymmetrically-deployed fences showed promise for yaw control at high angles of attack, althouh the force effectiveness has yet to be quantified.

Vess, R. J.↗
NASA NTRS1961

Investigation of Interference of a Deflected Jet with Free Stream and Ground on Aerodynamic Characteristics of a Semispan Delta-Wing VTOL Model

An investigation of the mutual interference effects of the ground, wing, deflected jet stream, and free stream of a semispan delta-wing VTOL model at zero and low forward speeds has been conducted in the 17-foot test section of the Langley 300-MPH 7-by 10-foot tunnel. The model consisted of two interchangeable semispan clipped delta wings, a simplified fuselage, and a high-pressure jet for simulation of a jet exhaust. Attached to the wing behind the jet were various sets of vanes for deflecting the jet stream to different turning angles. The effect of ground proximity gave the normally expected losses in lift at zero and very low forward speeds (up to about 60 or 80 knots for the assumed wing loading of 100 lb/sq ft); at higher forward speeds ground effects were favorable. At low forward speeds, out of ground effect, the model encountered large losses in lift and large nose-up pitching moments with the model at low angles of attack and the jet deflected 90 deg or 75 deg (the angles required for VTOL performance and very low forward speeds). Rotating the model to higher angles of attack and deflecting the jet back to lower angles eliminated these losses in lift. Moving the jet rearward with respect to the wing reduced the losses in lift and the nose-up moments at all speeds within the range of this investigation.

Spreemann, Kenneth P.↗
NASA NTRS1992

Vortex trapping on a 60 degree delta wing

An experiment was conducted to examine the vortex trapping concept on a 60 deg sweep delta wing at low angles of attack. Using tapered leading edge fences, stable vortices have been successfully trapped. The resulting increase in lift coefficient can be as high as 0.4, which amounts to a 6.5 deg shift in the lift coefficient curve of the delta wing. The corresponding increase in drag coefficient, however, is also significant.

Buchholz, Mark D.↗
NASA NTRS1983

Pressure investigation of NASA leading edge vortex flaps on a 60 deg Delta wing

Pressure distributions on a 60 deg Delta Wing with NASA designed leading edge vortex flaps (LEVF) were found in order to provide more pressure data for LEVF and to help verify NASA computer codes used in designing these flaps. These flaps were intended to be optimized designs based on these computer codes. However, the pressure distributions show that the flaps wre not optimum for the size and deflection specified. A second drag-producing vortex forming over the wing indicated that the flap was too large for the specified deflection. Also, it became apparent that flap thickness has a possible effect on the reattachment location of the vortex. Research is continuing to determine proper flap size and deflection relationships that provide well-behaved flowfields and acceptable hinge-moment characteristics.

Marchman, J. F., III↗
NASA NTRS2000

Test Cases for a Clipped Delta Wing with Pitching and Trailing-Edge Control Surface Oscillations

Steady and unsteady measured pressures for a Clipped Delta Wing (CDW) undergoing pitching oscillations and trailing-edge control surface oscillations have been presented . From the several hundred compiled data points, 22 static cases, 12 pitching-oscillation cases, and 12 control-surface-oscillation cases have been proposed for Computational Test Cases to illustrate the trends with Mach number, reduced frequency, and angle of attack. The planform for this wing was derived by simplifying the planform of a proposed design for a supersonic transport which is described as the Boeing 2707-300. The strake was deleted, the resulting planform was approximated by a trapezoid with an unswept trailing edge, and the twist and camber were removed. In order to facilitate pressure instrumentation, the thickness was increased to 6 percent from the typical 2.5 to 3 percent for the supersonic transport. The airfoil is thus a symmetrical circular arc section with t/c = 0.06. A wing of similar planform but with a thinner airfoil of t/c = 0.03 was used in the flutter investigations, and the buffet and stall flutter investigation . Flutter results are also reported both for the 3 per cent thick simplified wing and for a more complex SST model. One of the consequences of the increased thickness of the clipped delta wing is that transonic effects are enhanced for Mach numbers near one. They are significantly stronger than would be the case for the thinner wing. Also, with the combination of high leading edge sweep of 50.5, and the sharp leading edge, a leading edge vortex forms on the wing at relatively low angles of attack, on the order of three degrees. The Appendix discusses some of the vortex flow effects. In addition, a shock develops over the aft portion of the wing at transonic speeds such that at some angles of attack, there is both a leading edge vortex and a shock wave on the wing. Such cases are a computational challenge. Some previous applications of this data set have been for the evaluation of an aerodynamic panel method and for evaluation of a Navier-Stokes capability. Linear theory and panel method results are also presented, which demonstrated the need for inclusion of transonic effects. Flutter calculations for the related wing with t/c=O.O3 are given. In this report several Test Cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flow effects. An overview of the model and tests are given, and the standard formulary for these data is listed. For each type of data, a sample table and a sample plot of the measured pressures are presented. A complete tabulation and plotting of the Test Cases is given. Only the static pressures and the 1st harmonic real and imaginary parts of the pressures are available. All of the data for the test are included in a microfiche document in the original report and are available in electronic file form. The Test Cases are also available as separate electronic files.

Bennett, Robert M.↗
NASA NTRS1995

A study of the vortex flow over 76/40-deg double-delta wing

A low-speed wind-tunnel study of the flow about a 76/40-deg double-delta wing is described for angles of attack ranging from -10 to 25 deg and Reynolds numbers ranging from 0.5 to 1.5 Million. The study was conducted to provide data for the purpose of understanding the vortical flow behavior and for validating Computational Fluid Dynamics methods. Flow visualization tests have provided insight into the effect of the angle of attack and Reynolds number of the vortex-dominated flow both on and off of the surface of the double-delta wing. Upper surface pressure recordings from pressure orifices and Pressure Sensitive Paint have provided data on the pressures induced by the vortices. Flowfield surveys were carried out at an angle of attack of 10 deg by using a thin 5-hole probe. Numerical solutions of the compressible thin-layer Navier-Stokes equations were conducted and compared to the experimental data.

Verhaagen, N. G.↗
NASA NTRS1988

Numerical study of the vortex burst phenomenon for delta wings

A flux-difference splitting scheme is employed to compute low-speed flows over a delta wing for angles of attack from 0 to 40 deg as steady-state solutions to the three-dimensional, Reynolds-averaged Navier-Stokes equations in their thin-layer approximation. The finite-difference scheme is made spatially second-order accurate by applying a total variation diminishing-like discretization to the inviscid fluxes and central differencing to the viscous shear fluxes. Using first-order accurate Euler backward-time differencing, an efficient implicit algorithm is constructed, which combines approximate factorization in cross planes with a symmetric planar Gauss-Seidel relaxation in the remaining third spatial direction. The geometry of the thin (maximum thickness is 0.021), slender (aspect ratio is unity), sharp-edged delta wing is taken from Hummel's (1967, 1978) wind tunnel model. Over the entire angle-of-attack range, the computed values of lift and pitching moment are in good agreement with the experimental data. Also details of the flow-fieldlike spanwise surface pressure distributions compare well with the experiment. Computed flow-field results with a bubble-type vortex burst are analyzed in detail.

Hartwich, PETER-M.↗
NASA NTRS1991

Conical Euler methodology for unsteady vortical flows about rolling delta wings

A conical Euler methodology was developed to study unsteady vortex-dominated flows about rolling highly swept delta wings undergoing either forced or free-to-roll motions. The flow solver of the code involves a multistage Runge-Kutta time-stepping scheme which uses a finite-volume spatial discretization of the Euler equations on an unstructured grid of triangles. Results are presented for a 75-deg swept sharp-leading-edge delta wing at a freestream Mach number of 1.2 and at alpha = 10, 20, and 30 deg. At the 10 and 20 deg, forced harmonic analyses indicate that the rolling moment coefficients provide a positive damping which is verified by free-to-roll calculations. In contrast, at 30 deg, a forced harmonic analysis indicates that the rolling moment coefficient provides a negative damping at the small roll amplitudes. A free-to-roll calculation for this case produces an initially divergent response, but as the amplitude of motion grows with time, the response transitions to a wing-rock type of limit cycle oscillation.

Lee, Elizabeth M.↗