Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data quality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Thematic Mapper Data Quality and Performance Assessment in Renewable Resources/agriculture Remote Sensing

It is believed that the increased spatial resolution will provide solutions to proportion estimation error due to mixed pixels, and the increased spectral resolution will provide for the identification of important agricultural features such as crop stage, and condition. The results of analyses conducted relative to these hypothesis from sample segments extracted from the 4-band Detroit scene and the 7-band Mississippi County, Arkansas engineering test scene are described. Several studies were conducted to evaluate the geometric and radiometric performance of the TM to determine data viability for the more pertinent investigations of TM utility. In most cases this requirement was more than sufficiently satisfied. This allowed the opportunity to take advantage of detailed ground observations for several of the sample segments to assess class separability and detection of other important features with TM. The results presented regarding these TM characteristics show that not only is the increased definition of the within scene variance captured by the increased spatial and spectral resolution, but that the mid-IR bands (5 and 7) are necessary for optimum crop type classification. Both qualitative and quantitative results are presented that describe the improvements gained with the TM both relative to the MSS and on its own merit.

Bizzell, R. M.↗

Investigation of several aspects of LANDSAT 4/5 data quality

A second quadrant from the Sacramento, CA scene 44/33 acquired by LANDSAT-4 was tested for band to band resolution. Results show that all measured misregistrations are within 0.03 pixels for similar band pairs. Two LANDSAT-5 scenes (one from Corpus Christi, TX and the other from Huntsville, AL) were also tested for band to band resolution. All measured misregistrations in the Texas scene are less than 0.03 pixels. The across scan misregistration Alabama scene is -0.66 pixels and thus needs correction. A 512 x 512 pixel area of the Pacific Ocean was corrected for the pixel offsets. Modulation transfer function analysis of the San Mateo Bridge using data from the San Francisco scene was accomplished.

Wrigley, R. C.↗

University of Virginia acquisition of passenger ride quality data aboard the Total In-Flight Simulator (TIFS)

The subjective response of passengers to vehicle motions was investigated on the Total In-Flight Simulator (TIFS) aircraft. Prerecorded signals were converted into controlled aircraft motion for evaluation by ten subjects on a seven-point rating scale. Eighteen test flights were flown on August and September 1974, the results of which are to be used in validation studies on ground based simulators at NASA/Langley Research Center and to extend passenger response models.

Mcclurken, E. W., Jr.↗

Effects of temperature fluctuations of IUE data quality

Analysis of IUE calibration lamp images shows that variation in the temperature of the scientific instrument causes shifts in the location of the spectral format with respect to the reseau grid on the detector and in the location of the reseaux themselves. In high dispersion, a camera head amplifier temperature difference of 6C corresponds to a shift of 4 pixels in the spectral format for LWR and 2 pixels for SWP along the dispersion direction. Shifts perpendicular to the disperson (for the same temperature difference) are less than one pixel for both cameras. In low dispersion spectra, the shifts are similar but orthogonal to those described above with the larger motion lying in the direction perpendicular to the dispersion. In both dispersion modes, the observed shifts are apparently independent of wavelength. In high dispersion, the constant pixel shift mimics a constant velocity error.

Thompson, R. W.↗

Investigation of several aspects of LANDSAT-4 data quality

No insurmountable problems in change detection analysis were found when portions of scenes collected simultaneously by LANDSAT 4 MSS and either LANDSAT 2 or 3. The cause of the periodic noise in LANDSAT 4 MSS images which had a RMS value of approximately 2DN should be corrected in the LANDSAT D instrument before its launch. Analysis of the P-tape of the Arkansas scene shows bands within the same focal plane very well registered except for the thermal band which was misregistered by approximately three 28.5 meter pixels in both directions. It is possible to derive tight confidence bounds for the registration errors. Preliminary analyses of the Sacramento and Arkansas scenes reveals a very high degree of consistency with earlier results for bands 3 vs 1, 3 vs 4, and 3 vs 5. Results are presented in table form. It is suggested that attention be given to the standard deviations of registrations errors to judge whether or not they will be within specification once any known mean registration errors are corrected. Techniques used for MTF analysis of a Washington scene produced noisy results.

Wrigley, R. C.↗

LANDSAT-4 image data quality analysis

Seven heterogeneous areas within the entire Des Moines, Iowa test site were selected to define candidate spectral training classes using a clustering algorithm. In addition to the 91 cluster nonsupervised classes, three supervised training classes were defined. The original candidate training classes were reduced to 42 spectrally separable training classes. The minimum and average transformed divergence values for the 42 spectral classes and for the best subsets of Y TM spectral bands are shown in a table. The best spectral band for any combination of 1 through 7 bands is the first middle IR band. The next best band is the near IR, followed by the red band and than the thermal IR. The best combination of four bands includes one from each of the four regions of the spectrum (visible, near IR, middle IR, and thermal IR).

Anuta, P. E.↗

Investigation of several aspects of LANDSAT-4 data quality

The Thematic Mapper scene of Sacramento, CA acquired during the TDRSS test was received in TIPS format. Quadrants for both scenes were tested for band-to-band registration using reimplemented block correlation techniques. Summary statistics for band-to-band registrations of TM band combinations for Quadrant 4 of the NE Arkansas scene in TIPS format are tabulated as well as those for Quadrant 1 of the Sacramento scene. The system MTF analysis for the San Francisco scene is completed. The thermal band did not have sufficient contrast for the targets used and was not analyzed.

Wrigley, R. C.↗

An investigation of several aspects of LANDSAT-5 data quality

Band-to-band registration, geodetic registration, interdector noise, and the modulation transfer function (MTE) are discussed for the Palmer County; TX scene. Band combinations for several LANDSAT 4 and LANDSAT 5 scenes; the geodetic registration test for the Sacramento, CA area; periodic noise components in TM band 5; and grey level measurements by detector for Great Salt Lake (UT) dark water forescans and backscans are considered. Results of MTF analyses of the San Mateo Bridge and of TM high resolution and aerial Daedalus scanner imagery are consistent and appear to be repeatable. An oil-on-sand target was constructed on the White Sands Missile Range in New Mexico. The two-image analysis procedure used is summarized.

Wrigley, R. C.↗

LANDSAT-4/5 image data quality analysis

A LANDSAT Thematic Mapper (TM) quality evaluation study was conducted to identify geometric and radiometric sensor errors in the post-launch environment. The study began with the launch of LANDSAT-4. Several error conditions were found, including band-to-band misregistration and detector-to detector radiometric calibration errors. Similar analysis was made for the LANDSAT-5 Thematic Mapper and compared with results for LANDSAT-4. Remaining band-to-band misregistration was found to be within tolerances and detector-to-detector calibration errors were not severe. More coherent noise signals were observed in TM-5 than in TM-4, although the amplitude was generally less. The scan direction differences observed in TM-4 were still evident in TM-5. The largest effect was in Band 4 where nearly a one digital count difference was observed. Resolution estimation was carried out using roads in TM-5 for the primary focal plane bands rather than field edges as in TM-4. Estimates using roads gave better resolution. Thermal IR band calibration studies were conducted and new nonlinear calibration procedures were defined for TM-5. The overall conclusion is that there are no first order errors in TM-5 and any remaining problems are second or third order.

Malaret, E.↗

Langley Wind Tunnel Data Quality Assurance-Check Standard Results

A framework for statistical evaluation, control and improvement of wind funnel measurement processes is presented The methodology is adapted from elements of the Measurement Assurance Plans developed by the National Bureau of Standards (now the National Institute of Standards and Technology) for standards and calibration laboratories. The present methodology is based on the notions of statistical quality control (SQC) together with check standard testing and a small number of customer repeat-run sets. The results of check standard and customer repeat-run -sets are analyzed using the statistical control chart-methods of Walter A. Shewhart long familiar to the SQC community. Control chart results are presented for. various measurement processes in five facilities at Langley Research Center. The processes include test section calibration, force and moment measurements with a balance, and instrument calibration.

Hemsch, Michael J.↗

Assessment of SAGE Version 6.1 Ozone Data Quality

The SAGE-II V6.1 ozone retrievals are shown to be of better precision at all levels and to be much more accurate than previous retrievals in the lower stratosphere below 20 km altitude. A filtering procedure for removing anomalous ozone profiles associated with volcanic aerosol/cloud effects and other identified artifacts in V6.1 ozone is described. The agreement between SAGE and ozonesondes in the mean is shown to be approximately 10% down to the tropopause. Relative to the sondes SAGE tends to slightly overestimate ozone (less than 5%) between 15 and 20 km altitude, and systematically underestimates ozone in the troposphere by approximately 30% in the regions between 8 km altitude and 2 km below the tropopause. The precisions (random errors) of SAGE ozone retrievals above 25 km altitude are estimated to be 4% or better; they are a factor of ten worse below 16 km altitude. Linear trends in the differences between coincident SAGE and ozonesondes measurement are generally less than 0.3 %/year and not significantly different from zero in 95% confidence intervals. Compared to V5.96 retrievals, ozone trend differences between 20 and 50 km altitude are approximately 0. 1 %/year, below 20 km altitude the SAGE II trends are more positive by approximately 0.2 %/year. For the 1984-1999 period the SAGE-II shows a localized ozone loss of -0.4(+/- 0.25) %/year (2gigma) in the tropics at 20 km altitude. In the lower stratosphere between 16 and 22 km altitudes, the SAGE shows significant ozone losses in the mid-latitudes in both Hemispheres during the 1979-1999 periods. The ozone trends range from -0.24(+/- 0.18) to -0.77(+/- 0.46) (2sigma)%/year. However in the 1984-1999 period, the downward trends are smaller (-0.07 to - 0.25 %/year) in this altitude range, and the trends in the integrated column from 12 to 17 km altitude in mid-latitudes (35 deg - 60 deg) are not significantly different from zero (0.1 +?- 0.6 (2sigma)%/year). Averaged over the tropics (20 deg S to 20 deg N) the ozone column above 15 km altitude exhibit a trend of -0.12 +/- 0.08 (2sigma)%/year.

Wang, Hsiang J.↗

Software Facilitates Sharing of Water Quality Data Worldwide

John Freighery was an environmental engineer at Johnson Space Center when a new, simplified version of the coliform bacteria test was developed for astronaut use on the International Space Station. Through his New York City-based mWater Foundation, Freighery is using the test to help rural communities monitor their water supplies for contamination. The organization has also developed a mobile phone app to make the information publicly available.

Source record↗