Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data digitization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Development of a digital data base for reflectance-related soil information

A digital soils data base established for inclusion of soil reflectance data, physical, chemical, and engineering measurements, and site information is discussed. Initial data are taken from 500 soil samples covering the spectral range of 0.5 to 2.3 microns. Information obtained from each observation includes spectral data, and identification records with the soil and spectral observation parameters. The LARSPEC software system is available to retrieve and manipulate information, and scattergrams of identification and spectral data allow the initiation of statistical analyses of soil data. In addition, soil characteristics, graphical displays of reflectance spectra, and identification information examples are given.

Stoner, E. R.↗
NASA NTRS1991

C-130 Automated Digital Data System (CADDS)

Real time airborne data acquisition, archiving and distribution on the NASA/Ames Research Center (ARC) C-130 has been improved over the past three years due to the implementation of the C-130 Automated Digital Data System (CADDS). CADDS is a real time, multitasking, multiprocessing ROM-based system. CADDS acquires data from both avionics and environmental sensors inflight for all C-130 data lines. The system also displays the data on video monitors throughout the aircraft.

Scofield, C. P.↗
NASA NTRS1988

A simulator investigation of the use of digital data link for pilot/ATC communications in a single pilot operation

Studies have shown that radio communications between pilots and air traffic control contribute to high pilot workload and are subject to various errors. These errors result from congestion on the voice radio channel, and missed and misunderstood messages. The use of digital data link has been proposed as a means of reducing this workload and error rate. A critical factor, however, in determining the potential benefit of data link will be the interface between future data link systems and the operator of those systems, both in the air and on the ground. The purpose of this effort was to evaluate the pilot interface with various levels of data link capability, in simulated general aviation, single-pilot instrument flight rule operations. Results show that the data link reduced demands on pilots' short-term memory, reduced the number of communication transmissions, and permitted the pilots to more easily allocate time to critical cockpit tasks while receiving air traffic control messages. The pilots who participated unanimously indicated a preference for data link communications over voice-only communications. There were, however, situations in which the pilot preferred the use of voice communications, and the ability for pilots to delay processing the data link messages, during high workload events, caused delays in the acknowledgement of messages to air traffic control.

Hinton, David A.↗
NASA NTRS1980

Using LANDSAT digital data for estimating green biomass

The author has identified the following significant results. Relationships between the quantity of mixed prairie rangeland vegetation and LANDSAT MSS response were studied during four growing seasons at test sites throughout the United States Great Plans region. A LANDSAT derived parameter, the normalized difference was developed from theoretical considerations fro statistical estimation of the amount and seasonal condition of rangeland vegetation. This parameter was tested for application to local assessment of green forage biomass and regional monitoring of range feed conditions and drought. Results show that for grasslands in the Great Plains with near continuous vegetative cover and free of heavy brush and forbs, the LANDSAT digital data can provide a useful estimate of the quantity of green forage biomass (within 250 kg/ha), and at least five levels of pasture and range feed conditions can be adequately mapped for extended regions.

Deering, D. W.↗
NASA NTRS1982

LANDSAT Digital Data Base Preparation for the Pennsylvania Defoliation Application Pilot Test

A LANDSAT digital mosaic data base for the State of Pennsylvania was prepared for use in the development of an automated system to annually estimate the extent and severity of Gypsy Moth defoliation of hardward forests. The techniques for detecting the defoliation and development of a geographic information system (GIS) to assess damage is being developed jointly by NASA/Goddard Space Flight Center and Pennsylvania State University using the JPL prepared mosaic base. The JPL processing involved the use of ground control points from the Master Data Processor for planimetric control, resampling of the LANDSAT data to 57 x 57 meter pixels, realignment to north, and reprojection to the Universal Transverse Mercator (UTM) projection in UTM zones 17 and 18. The completed mosaic for each UTM zone was subdivided into 1 degree of latitude by 2 degrees of longitude quadrangles for easy data handling. Consideration is given to the issues of mapping standards, sensor and spacecraft platform characteristics, and their implication to geographic information systems operation. Methods for obtaining measures of accuracy for LANDSAT mosaics are reviewed.

Mcleod, R. G.↗
NASA NTRSDate not supplied

Notes on Digital-Data Analysis

The presentation is an overview and discussion of concepts normally encountered during digital-signal processing of sampled time histories. It is not a comprehensive literature survey, but simply a practical guide for best usage. Sections of the talk cover: digital sampling and representation, the Nyquist-Shannon sampling theorem, aliasing or frequency folding, the power spectrum, windowing and spectral spreading, scalloping, and best practices. The Advanced Air Transport Technology Project supports this effort.

Aeroacoustics↗
NASA NTRS1986

Estimation of absolute water surface temperature based on atmospherically corrected thermal infrared multispectral scanner digital data

Airborne remote sensing systems, as well as those on board Earth orbiting satellites, sample electromagnetic energy in discrete wavelength regions and convert the total energy sampled into data suitable for processing by digital computers. In general, however, the total amount of energy reaching a sensor system located at some distance from the target is composed not only of target related energy, but, in addition, contains a contribution originating from the atmosphere itself. Thus, some method must be devised for removing or at least minimizing the effects of the atmosphere. The LOWTRAN-6 Program was designed to estimate atmospheric transmittance and radiance for a given atmospheric path at moderate spectral resolution over an operational wavelength region from 0.25 to 28.5 microns. In order to compute the Thermal Infrared Multispectral Scanner (TIMS) digital values which were recorded in the absence of the atmosphere, the parameters derived from LOWTRAN-6 are used in a correction equation. The TIMS data were collected at 1:00 a.m. local time on November 21, 1983, over a recirculating cooling pond for a power plant in southeastern Mississippi. The TIMS data were analyzed before and after atmospheric corrections were applied using a band ratioing model to compute the absolute surface temperature of various points on the power plant cooling pond. The summarized results clearly demonstrate the desirability of applying atmospheric corrections.

Anderson, James E.↗
NASA NTRS1979

Impact of Short Interval SMS Digital Data on Wind Vector Determination for a Severe Local Storms Area

The impact of 5 minute interval SMS-2 visible digital image data in analyzing severe local storms is examined using wind vectors derived from cloud tracking on time lapsed sequence of geosynchronous satellite images. The cloud tracking areas are located in the Central Plains, where on 6 May 1975, hail-producing thunderstorms occurred ahead of a well defined dry line. The results demonstrate that satellite-derived wind vectors and their associated divergence fields complement conventional meteorological analyses in describing the conditions preceding severe local storm development.

Peslen, C. A.↗
NASA NTRS1990

Rapid calculation of terrain parameters for radiation modeling from digital elevation data

Digital elevation models are now widely used to calculate terrain parameters to determine incoming solar and longwave radiation for use in surface climate models, interpretation of remote-sensing data, and parameters in hydrologic models. Because of the large number of points in an elevation grid, fast algorithms are useful to save computation time. A description is given of rapid methods for calculating slope and azimuth, solar illumination angle, horizons, and view factors for radiation from sky and terrain. Calculation time is reduced by fast algorithms and lookup tables.

Dozier, Jeff↗
NASA NTRS1986

The SIR-C ground data system: Digital processor, data products, information flow

The SIR-C (Shuttle Imaging Radar) instrument will collect both C-Band and L-Band data with each frequency band consisting of direct (HH or VV) and cross-polarized (HV or VH) data. Considering all possible combinations as many as eight different data channels will be available for any given target area. This data will be digitized and formatted on-board for direct downlink via the Tracking and Data Relay Satellite System (TDRSS), or it will be buffered through on-board high density digital recorders for storage or transmission when TDRSS is available. The data is received by the TDRSS ground station at White Sands and is nominally relayed via DOMSAT to the high data rate recording facility at GSFC. The tapes are then shipped to JPL for processing into imagery and eventual distribution to the SIR-C investigators.

Curlander, John C.↗
NASA NTRS1983

Detecting agricultural to urban land use change from multi-temporal MSS digital data

Conversion of agricultural land to a variety of urban uses is a major problem along the Wasatch Front, Utah. Although LANDSAT MSS data is a relatively coarse tool for discriminating categories of change in urban-size plots, its availability prompts a thorough test of its power to detect change. The procedures being applied to a test area in Salt Lake County, Utah, where the land conversion problem is acute are presented. The identity of land uses before and after conversion was determined and digital procedures for doing so were compared. Several algorithms were compared, utilizing both raw data and preprocessed data. Verification of results involved high quality color infrared photography and field observation. Two data sets were digitally registered, specific change categories internally identified in the software, results tabulated by computer, and change maps printed at 1:24,000 scale.

Ridd, M. K.↗
NASA NTRS1972

On the selection of a sampling filter bandwidth for a digital data detector.

Consideration of the problem of selecting a low-pass sampling bandwidth for the digital mechanization of a matched-filter bit-synchronizer combination. An attempt is made to determine how large a data rate can be provided for a fixed sampling rate (limited by hardware considerations on the sampling device) without paying an excessive penalty in SNR performance.

Simon, M. K.↗
NASA NTRS1975

LANDSAT digital data processing: A near real-time application

An application of rapid generation of classed digital images from LANDSAT-1 was demonstrated and its feasibility evaluated by NASA in conjunction with the Environmental Protection Agency (EPA), Texas A and M University (TAMU), and the Cousteau Society. The primary purpose was to show that satellite data could be processed and transmitted to the Calypso, which was used as a research vessel, in time for use in directing it to specific locations of possible plankton upwellings, sediment, or other anomalies in the coastal water areas along the Gulf of Mexico.

Barker, J. L.↗
NASA NTRS1977

Capacitive connectors for digital-data lines

Proposed connector consisting of twin metal films separated by thin layers of insulating material transmits digital pulses capacitively. There is no direct contact between metal films; therefore, there is no ohmic contact drop and no wear when connections are changed. Since metal films are sealed in insulating material, there is no corrosion from exposure to atmosphere.

Studer, P. A.↗
DOE OSTI2026

Fermilab PIP II machine protection system digitized data noise elimination scheme and its FPGA implementation

In Fermilab's PIP-II machine protection system, beam loss signals from various detectors are digitized at 125 MS/s. Noise from both high-frequency sources and low-frequency 60 Hz AC power equipment can contaminate the data. To suppress noise across these ranges especially 60 Hz and its harmonics, which overlap with beam loss signal frequencies advanced digital processing beyond standard filtering is required. Several real-time functional blocks were simulated and tested on an FPGA: (1) a dual time-constant discharging integrator filter, (2) a de-ripple baseline extraction and storage block, and (3) a fast-recovery discharging integrator. The nonlinear IIR integrator filter removes high-frequency noise and feeds into the baseline extractor. Upon detecting abrupt beam loss, it switches to a longer time constant to prevent baseline distortion. The de-ripple block calculates a valid baseline by averaging over multiple 60 Hz periods, storing results in a 4096-word FPGA RAM. This baseline is subtracted from raw data before integration by the fast-recovery block, which resets quickly after use. All blocks achieved expected performance.

Wu, J. [Fermilab] (ORCID:0000000344329521)↗
NASA NTRS2010

The Digital Data Acquisition System for the Russian VLBI Network of New Generation

The system consists of several identical channels of 1024 MHz bandwidth each. In each channel, the RF band is frequency-translated to the intermediate frequency range 1 - 2 GHz. Each channel consists of two parts: the digitizer and Mark 5C recorder. The digitizer is placed on the antenna close to the corresponding Low-Noise Amplifier output and consists of the analog frequency converter, ADC, and a device for digital processing of the signals using FPGA. In the digitizer the subdigitization on frequency of 2048 MHz is used. For producing narrow-band channels and to interface with existing data acquisition systems, the polyphase filtering with FPGA can be used. Digital signals are re-quantized to 2-bits in the FPGA and are transferred to an input of Mark 5C through a fiber line. The breadboard model of the digitizer is being tested, and the data acquisition system is being designed.

Fedotov, Leonid↗