Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “current control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Tunable tunnel barriers in a semiconductor via ionization of individual atoms

individual adatoms deposited on an InSb(110) surface. The adatoms can be reproducibly dropped off from the STM tip by voltage pulses, and impact tunneling into the surface by up to ~100×. The spatial extent and magnitude of the tunneling effect are widely tunable by imaging conditions such as bias voltage, set current and photoillumination. We attribute the effect to occupation of a (+/0) charge transition level, and switching of the associated adatom-induced band bending. The effect in STM topographic images is well reproduced by transport modeling of filling and emptying rates as a function of the tip position. STM atomic contrast and tunneling spectra are in good agreement with density functional theory calculations for In adatoms. The adatom ionization effect can extend to distances greater than 50 nm away, which we attribute to the low concentration and low binding energy of the residual donors in the undoped InSb crystal. These studies demonstrate how individual atoms can be used to sensitively control current flow in nanoscale devices.

Physics↗
DOE OSTI2024

Highly Efficient Room‐Temperature Spin‐Orbit‐Torque Switching in a Van der Waals Heterostructure of Topological Insulator and Ferromagnet

Abstract All‐Van der Waals (vdW)‐material‐based heterostructures with atomically sharp interfaces offer a versatile platform for high‐performing spintronic functionalities at room temperature. One of the key components is vdW topological insulators (TIs), which can produce a strong spin‐orbit‐torque (SOT) through the spin‐momentum locking of their topological surface state (TSS). However, the relatively low conductance of the TSS introduces a current leakage problem through the bulk states of the TI or the adjacent ferromagnetic metal layers, reducing the interfacial charge‐to‐spin conversion efficiency ( q ICS ). Here, a vdW heterostructure is used consisting of atomically‐thin layers of a bulk‐insulating TI Sn‐doped Bi 1.1 Sb 0.9 Te 2 S 1 and a room‐temperature ferromagnet Fe 3 GaTe 2, to enhance the relative current ratio on the TSS up to ≈20%. The resulting q ICS reaches ≈1.65 nm −1 and the critical current density J c ≈0.9 × 10 6 Acm −2 at 300 K, surpassing the performance of TI‐based and heavy‐metal‐based SOT devices. These findings demonstrate that an all‐vdW heterostructure with thickness optimization offers a promising platform for efficient current‐controlled magnetization switching at room temperature.

2D ferromagnet↗
DOE OSTI2026

Maximizing dynamic range and performance of anatase TiO 2 ECRAM through structure and programming

Here, in this study, we investigate the structure-dependent modulation characteristics of all-solid-state three-terminal electrochemical random-access memory (ECRAM) based on an anatase Li x TiO 2 channel. By directly comparing “asymmetric” and “symmetric” ECRAM device architectures, we reveal significant insight into the impact of a non-zero gate-drain open-circuit voltage and its influence on voltage vs. current-controlled gating. We also explore the impact of potentiation/depression write parameters on the symmetry, linearity, and dynamic range of the device response. Together, initial results from optimizing structure and programming approaches yielded unprecedented G max /G min ratios of >1,000 for ECRAM and hundreds of tunable memory states with excellent linearity and symmetry. Simulations based on these ECRAM devices further illustrate the promise of this analog memory technology, achieving near 2% classification error in the MNIST digit recognition benchmark for a range of training parameters compared to a theoretical best of 1.66% and outperforming other device models extracted from the literature.

AIHWKit↗
DOE OSTI2025

Dynamic security assessment of systems powered only by grid-forming power plants with uncertain dispatch using polynomial vectors

A modern challenge in power engineering is to perform the dynamic security assessment (DSA) of grids that are 100% powered by inverter-based resources (IBRs). Addressing this challenge is difficult because: (i) the dispatch of IBRs can be uncertain as a result of the variability of renewable resources and (ii) they have hard current control limits that cannot be neglected, contrasting synchronous machines. To address this problem, this paper sets forth a framework to conduct DSA of bulk power systems that are 100% powered by grid-forming IBRs. Furthermore, the framework considers that IBR operational conditions are unknown but bounded by a zonotope which is also expressed as a polynomial vector for uncertainty propagation via Dormand–Prince integration. The framework is applied to modified versions of the WSCC 9-bus and IEEE 39-bus grids.

14 SOLAR ENERGY↗
DOE OSTI2023

Nonreciprocal Supercurrents in a Field-Free Graphene Josephson Triode

Superconducting diodes are proposed non-reciprocal circuit elements that should exhibit nondissipative transport in one direction while being resistive in the opposite direction. Multiple examples of such devices have emerged in the past couple of years, however their efficiency is typically limited, and most of them require magnetic field to function. Here we present a device achieving efficiencies upwards of 90% while operating at zero field. Our samples consist of a network of three graphene Josephson junctions linked by a common superconducting island, to which we refer as a Josephson triode. The triode is tuned by applying a control current to one of the contacts, thereby breaking the time-reversal symmetry of the current flow. The triode’s utility is demonstrated by rectifying a small (tens of nA amplitude) applied square wave. Finally, we speculate that devices of this type could be realistically employed in the modern quantum circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Lyophilization of ASFV vaccine candidate ASFV-G-ΔI177L offers long term stability

Abstract For over a century African swine fever (ASF) has been causing outbreaks leading to devastating losses for the swine industry. The current pandemic of ASF has shown no signs of stopping and continues to spread causing outbreaks in additional countries. Currently control relies mostly on culling infected farms, and strict biosecurity procedures. Recently a vaccine, ASFV-G-ΔI177L was approved for use in Vietnam. In this study we evaluate the long-term stability of lyophilized ASFV-G-ΔI177L. Understanding the stability of different formulations of vaccines is information necessary for deployment of vaccines to ASF outbreak areas, particularly those that do not have a reliable well established cold chain to ensure conservation of vaccine quality. In this report, we determined that ASFV-G-ΔI177L, when lyophilized under specific conditions, is stable for up to one year at 4 °C, with similar vaccine titers after storage. Next-generation sequencing analysis also determined that lyophilization and long-term storage under these conditions had no effect on the genome of ASFV as the genome remained genetically identical to the original non-lyophilized form.

Science & Technology - Other Topics↗
DOE OSTI2026

Tunable Conversion of Poly(Acrylic Acid) to Vinyl Methyl Ether Copolymers via Electrochemical Decarboxylation

Recognizing the potential of polymer-to-polymer transformations for plastics valorization, a new electrochemical strategy for the decarboxylative functionalization of polyacrylates has been developed. In contrast to most electrochemical approaches to plastic waste valorization that use small-molecule mediators or only form deconstruction products, this report describes one of the first direct electrochemical redox upconversions of a commodity polymer and involves activation of poly(acrylic acid), a material commonly found in disposable diapers and other personal hygiene products. Via electrochemical decarboxylation, poly(acrylic acid) is converted to methyl ether-containing copolymers. Although methods to prepare the 1:1 regularly alternating poly(vinyl methyl ether-alt-maleic anhydride) are known, routes to generate copolymers with variable levels of vinyl methyl ether and acrylate moieties are unknown, but such polymers may have utility in similar applications, such as dentifrices. Tunable conversions with up to 62 mol% vinyl methyl ether content were achieved via controlled-current electrolyses at >100 mA. This approach enables efficient access to copolymers with broad range of comonomer content from a common waste polymer starting material.

Dauzvardis, Fabian [University of Delaware, Newark↗
DOE OSTI2020

Magnetic droplet solitons

Magnetic droplet solitons are dynamical magnetic textures that form due to an attractive interaction between spin waves in thin films with perpendicular magnetic anisotropy. Spin currents and the spin torques associated with these currents enable their formation as they provide a means to excite non-equilibrium spin-wave populations and compensate their decay. Recent years have seen rapid advances in experiments that realize and study magnetic droplets. Important advances include the first direct x-ray images of droplets, determination of their threshold and sustaining currents, measurement of their generation and annihilation time, and evidence for drift instabilities, which can limit their lifetime. This perspective discusses these studies and contrasts these solitons to other types of spin-current excitations, such as spin-wave bullets, and static magnetic textures, including magnetic vortices and skyrmions. Magnetic droplet solitons can also serve as current controlled microwave frequency oscillators with potential applications in neuromorphic chips as nonlinear oscillators with memory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Disruption event characterization and forecasting in tokamaks

Disruption prediction and avoidance is a critical need for next-step tokamaks, such as ITER. Disruption Event Characterization and Forecasting (DECAF) research fully automates analysis of tokamak data to determine chains of events that lead to disruptions and to forecast their evolution allowing sufficient time for mitigation or complete avoidance of the disruption. Disruption event chains related to local rotating or global magnetohydrodynamic (MHD) modes and vertical instability are examined with warnings issued for many off-normal physics events, including density limits, plasma dynamics, confinement transitions, and profile variations. Along with Greenwald density limit evaluation, a local radiative island power balance theory is evaluated and compared to the observation of island growth. Automated decomposition and analysis of rotating tearing modes produce physical event chains leading to disruptions. A total MHD state warning model comprised of 15 separate criteria produces a disruption forecast about 180 ms before a standard locked mode detector warning. Single DECAF event analyses have begun on KSTAR, MAST, and NSTX/-U databases with thousands of shot seconds of device operation using from 0.5 to 1 × 10 6 tested sample times per device. An initial multi-device database comparison illustrates a highly important result that plasma disruptivity does not need to increase as βN increases. Global MHD instabilities, such as resistive wall modes (RWMs), can give the briefest time period of warning before disruption compared to other physics events. In an NSTX database with unstable RWMs, the mode onset, loss of boundary and current control, and disruption event warnings are found in all cases and vertical displacement events are found in 91% of cases. An initial time-dependent reduced physics model of kinetic RWM stabilization created to forecast the disruption chain predicts instability 84% of the time for experimentally unstable cases with a relatively low false positive rate. Instances of the disruption event chain analysis illustrate dynamics including H–L back transitions for rotating MHD and global RWM triggering events. Furthermore, disruption warnings are issued with sufficient time before the disruption (on transport timescales) to potentially allow active profile control for disruption avoidance, active mode control, or mitigation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Spin-Transfer-Torque Oscillator with an Antiferromagnetic Exchange-Coupled Composite Free Layer

We present an antiferromagnetically exchange-coupled composite (soft and hard layers) spin torque oscillator (AF-ECC STO) and demonstrate its operation via both analytical and micromagnetic modeling. The operation exploits the exchange field due to the antiferromagnetic coupling between soft and hard sublayers of the free layer as well as on the easy-plane anisotropy of the soft sublayer. Optimized AF-ECC STO structures can generate large-amplitude magnetization oscillations, which can be tuned over a broad frequency range with precessions mostly generated by the soft layer. We demonstrate that the AF-ECC STO structure offers flexibility in current control of the oscillation frequency and magnetization angle for realistic material parameters.

42 ENGINEERING↗
DOE OSTI2023

Analysis and Characterization of Four-quadrant Switches based Commutation Cell

A four-quadrant switch (FQS) blocks either polarity voltage and controls current flow in both directions. Unlike voltage-source converters, in which two-quadrant switches operate over a narrow voltage range, four-quadrant switches are required to operate over a wide range of both voltage and current in applications such as matrix converters and current-source converters. Furthermore, matrix converters require multi-step commutation schemes compared to two-step schemes for current-bidirectional switch based voltage-source converters and voltage-bidirectional switch based current-source converters. This paper provides a generalized overview of commutation schemes used for two and four quadrant switches based two-level commutation cells, identifies comparison indices for FQS commutation schemes, and discusses the need for adaptive commutation-step times for wide voltage and current variation applications. Also, the static and dynamic characteristics of 1.2 kV rated FQS implementations utilizing commercial SiC MOSFETs from four different manufacturers and novel monolithic SiC BiDirectional Field Effect Transistor (BiDFET) have been reported.

Commutation cell, four quadrant switch, SiC Bidire↗
DOE OSTI2024

Power-Hardware-in-the-Loop Interfaces for Inverter-Based Microgrid Experiments Including Transitions

Microgrids continue to proliferate, particularly those that rely on inverter-based resources as the microgrid's voltage and frequency leader. Hardware-in-the-loop simulations can de-risk microgrid deployments, and therefore we need power-hardware-in-the-loop (PHIL) interfaces for grid-forming (GFM) inverters to enable simulations of seamless transitions between islanded and grid-connected operation. Such interfaces are particularly challenging when the inverters need to switch modes, i.e., between grid-following (GFL) and GFM as the microgrid transitions between grid-connected and islanded operation. This paper presents two PHIL interfaces for such microgrids and the preliminary experimental results.

experiments↗
DOE OSTI2025

Securing 3D NAND Without Density Loss via In-Situ Encryption Using a Single Transistor XOR Cell

In this article, we push lightweight XOR-based in-situ encryption to extreme density by proposing a singletransistor XOR memory cell and applying it to 3D NAND, enabling secure data storage without density loss. Using a ferroelectric field-effect transistor (FeFET) as an example technology, we demonstrate that: i) a single-transistor memory can realize the XOR function by exploiting the ability to charge the source and drain separately and control current flow direction, eliminating the need for conventional encrypted cells that rely on complementary devices; ii) with a XOR-based cipher, encryption and decryption can be mapped to in-situ array operations, where ciphertext is stored as the threshold voltage (VTH) states of FeFETs in a NAND string, and decryption is achieved through read operations using key-dependent complementary source/drain bias; iii) the proposed technique is scalable to multi-level cell (MLC) storage by encrypting and decrypting data bit by bit; iv) using an integrated NAND FeFET array, we experimentally demonstrate encryption and decryption operations for both single-level cell (SLC) and MLC storage; v) systemlevel benchmarking shows that the proposed technique achieves 48× and 278× improvements in encryption and decryption throughput, respectively, compared to AES.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mitigation of Motor Stalling and FIDVR via Energy Storage Systems with Temporal Logic Specifications

The fault-induced delayed voltage recovery (FIDVR) phenomenon has been very common from the distribution system through the transmission system. It causes a delay on recovering significantly depressed local voltage after the fault is cleared, and it can also lead to more widespread cascading system failures. Mitigating this event with current control approaches is challenging and becoming a crucial issue. Here, a model predictive control-based strategy employing signal temporal logic specifications is proposed to help mitigate FIDVR. To this end, it investigates and extends a dynamic performance model allowing analytic insights into the system-wide impact of motor stalling and FIDVR. The proposed controller provides richer descriptions of voltage specifications addressing both magnitude and time simultaneously. We consider different control specifications with reactive power support from energy storage systems to prevent the voltage during/after the fault from dropping too low, and reduce the delay time of voltage recovery. The simulation results conducted with the IEEE 57 bus test network validate the proposed method and demonstrate the effectiveness of the mitigation strategy on FIDVR.

25 ENERGY STORAGE↗
DOE OSTI2022

Modeling Needs to Support the Reconstruction Strategy of Ukraine

Ukraine has been facing difficult times. Russia started a full-scale invasion on February 24, 2022, and has caused huge human and infrastructure losses. As a result of the invasion, more than 8 million people left their homes. The Russian army has targeted Ukrainian energy sources, destroying or damaging over 50% of thermal power generation capacity (coal and gas), 30% of solar generation, and 90% of wind generation. The Russians are also threatening Ukrainian energy security, as they currently control the Zaporizhzhia nuclear power plant – Europe’s largest. In addition, Russia has destroyed 121,000 buildings, including 5,300 multistory buildings - more buildings than Ukraine built during the past five years. The occupiers destroyed or damaged 343 district heat boiler stations (destroyed 12 / damaged 331) and 8 CHPs (destroyed 4/ damaged 4). There is no doubt that Ukraine will be able to protect its sovereignty and restore its territorial integrity; however, this will be a long process. The Government of Ukraine needs to simultaneously focus on many issues, from waging war to the restoration of electricity, water, and heat supply in the territories close to the front line. In addition to these time-sensitive issues, the government also needs to plan a long term multi-sector strategy for the reconstruction of Ukraine’s economy. Ukraine initiated a broad-based political process for recovery at the International Ukraine Recovery Conference (URC 2022) in Lugano, Switzerland. Prior to URC 2022, Ukraine applied for EU membership on February 28 and was granted the status of candidate country by the European Council on June 23, 2022. More than 40 nations are fully committed to supporting Ukraine throughout its path from early to long-term recovery. In addition, these countries link a successful recovery to Ukraine’s European future (URC, 2022a). The reconstruction process will be long. The government also recognizes that it is not enough to build energy infrastructure back – it should be built back better. The government is committed to building a more sustainable and cleaner energy sector. Energy modeling can provide important insights into paths to decarbonize Ukraine’s economy while rebuilding it after the war. Pacific Northwest National Laboratory (PNNL) and the Institute for Economics and Forecasting of the National Academy of Sciences of Ukraine (IEF) work on modeling decarbonization scenarios in the energy sector of Ukraine. The teams focus on the heat sector, which includes district heat, autonomous and individual heating, and energy consumption by final energy consumption sectors, including buildings. Since the teams use world-class integrated assessment models, other sectors will be analyzed as well. The purpose of the document is to describe the needs of key Ukrainian ministries in modeling the reconstruction process. The scope of this document is limited to modeling energy consumption by the power and heat sectors, final energy consumption by buildings, and GHG emissions from these two sectors. The rest of this policy memo is organized as follows. After this introduction, Chapter 2 discusses key provisions of the reconstruction strategy with a focus on energy, buildings, heat supply, environment, and European integration aspirations. Section 3 provides an overview of recent developments and key decisions of the Government of Ukraine in the area of energy efficiency and decarbonization. Finally, Section 4 provides key suggestions on how PNNL and IEF can help the Government of Ukraine in developing strategic documents.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Clean Energy Microgrids: Considerations for State Energy Offices and Public Utility Commissions to Increase Resilience, Reduce Emissions, and Improve Affordability

In fall 2019, the National Association of Regulatory Utility Commissioners (NARUC) and the National Association of State Energy Officials (NASEO) initiated a joint Microgrids State Working Group (MSWG), funded by the U.S. Department of Energy (DOE) Office of Electricity (OE). The MSWG aims to bring together NARUC and NASEO members to explore the capabilities, costs, and benefits of microgrids; discuss barriers to microgrid development; and develop strategies to plan, finance, and deploy microgrids to improve resilience. This report, Clean Energy Microgrids: Considerations for State Energy Offices and Public Utility Commissions to Increase Resilience, Reduce Emissions, and Improve Affordability, focuses specifically on how clean energy microgrids can achieve both resilience and clean energy benefits. The paper provides an overview of the challenges faced by clean energy microgrids, outlines benefits that clean energy microgrids can provide, and details economic and cost considerations for the development of clean energy microgrid projects. Outlined in the paper are the necessary technological components of a clean energy microgrid, including generation, storage, energy efficiency measures, and smart controls. Current technologies are highlighted, along with potential configurations of clean technologies that are approaching cost competitiveness with commercially available options. The paper concludes with both policy and regulatory considerations for State Energy Offices and Public Utility Commissions to enhance the development and deployment of clean energy microgrids. Although it touches on the clean energy microgrids’ role in integrating distributed energy resources (DERs) into the larger grid, this is not the focus of this paper.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Williston Basin CORE-CM Initiative Final Report

The University of North Dakota Energy & Environmental Research Center (EERC) is leading the Williston Basin Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) Initiative to drive the expansion and transformation of coal and coal-based resource usage within the Williston Basin to produce rare-earth elements (REEs), CMs, and nonfuel carbon-based products (CBPs). This project is the first phase in a long-term program and set the stage for future work by assessing resource, market, technology, and infrastructure knowledge; identifying knowledge gaps; developing a series of plans to be carried out in future work; and initiating stakeholder engagement. Composed of several tasks, the project sought to identify, characterize, and assess several necessary aspects vital to make this future work a reality. The project’s fundamental task was to characterize the Williston Basin CORE-CM resources. Over 2500 samples from multiple sources were utilized to begin the assessment. Several locations were identified in western North Dakota where sample analysis identified the total REE (TREE) concentration as being over 500 parts per million (ppm), which is at a concentration level that would be suitable to consider for mining and extraction. Current operating coal mines have sufficient concentrations of TREEs for consideration. However, the current data across the basin are still not adequate to fully characterize REE and CM content nor give reliable estimates of the total resource potential. Waste stream reuse was also considered, and several streams were identified which ranged from potential energy sources to chemicals to material wastes. This includes streams that result from oil and gas production. These streams are not fully characterized, and further data are needed before they can be accurately assessed. Infrastructure within the Williston Basin is suitable for expansion of a new industry to mine, extract, and concentrate REEs and CMs. The development of this industry will not only preserve many existing jobs in the coal-mining industry but produce many new jobs. The supply chain for REEs and CMs is currently controlled outside of the United States in nations such as China, but the potential to develop the supply chain within the basin is considered possible. Processing of the mined materials for REEs and CMs needs further research. The technology and knowhow exist outside of the United States, and within the country much of the knowledge has been lost and must be regained. To develop the supply chain and regain lost processing technology, the creation of technology innovation centers (TICs) is crucial. The Williston Basin contains several similar centers and entrepreneurial assistance for other industries that can be applied in the development of REE and CM innovation centers. Education to develop the new skill sets required is also needed. Outreach is important for the development of the REE and CM industry within the basin. Understanding throughout federal and state governments, state agencies, industry, and resource end users is vital for the industry to form and grow. Through this project these groups have been contacted through bulletins, presentations, webinars, and annual symposiums. The report is a summary of the work conducted and throughout refers to a series of appendixes which contain more thorough and specific information about each section.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Impact of K-factor on Short Circuit Program Convergence for Inverter-Based Resources during Faults

Classical short-circuit programs that linearize the power network are no longer applicable for inverter based resources (IBRs), necessitating an iterative approach. Phasor domain programs can model the IBRs using an iterative approach considering nonlinear fault responses. In phasor domain models, the IBR can be modeled as a voltage controlled current source (VCCS) in tabular form with positive, negative, and zero sequence information for balanced and unbalance short-circuit faults. In the VCCS modeling of the IBR, positive and negative incremental reactive current, also known as the k-factor, plays an important role in short circuit program convergence. In this work, a few approaches: conventional VCCS modeling with a k-factor of 2, conventional VCCS modeling with a k-factor of 2 with modified pre-fault voltages, VCCS characteristics based on the power flow solution with a k-factor of 2, and VCCS characteristics based on the power flow solution with a k-factor of 1 are investigated for short circuit program convergence under higher IBR penetration. The IEEE 39 bus New England Test System is taken as the test system, and simulations are carried out in PSS®CAPE 15.0.26 simulation software. Simulation results demonstrate that IBR penetration is higher for the VCCS model, which corresponds to the power flow solution with k-factor 1, compared to other approaches.

42 ENGINEERING↗