Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

FORWARD MODELING OF PROPAGATING SLOW WAVES IN CORONAL LOOPS AND THEIR FREQUENCY-DEPENDENT DAMPING

Propagating slow waves in coronal loops exhibit a damping that depends upon the frequency of the waves. In this study we aim to investigate the relationship of the damping length (L{sub d}) with the frequency of the propagating wave. We present a 3D coronal loop model with uniform density and temperature and investigate the frequency-dependent damping mechanism for the four chosen wave periods. We include the thermal conduction to damp the waves as they propagate through the loop. The numerical model output has been forward modeled to generate synthetic images of SDO/AIA 171 and 193 Å channels. The use of forward modeling, which incorporates the atomic emission properties into the intensity images, allows us to directly compare our results with the real observations. The results show that the damping lengths vary linearly with the periods. We also measure the contributions of the emission properties on the damping lengths by using density values from the simulation. In addition to that we have also calculated the theoretical dependence of L{sub d} with wave periods and showed that it is consistent with the results we obtained from the numerical modeling and earlier observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of a metric type N solar radio burst

Type III and type-III-like radio bursts are produced by energetic electron beams guided along coronal magnetic fields. As a variant of type III bursts, Type N bursts appear as the letter "N" in the radio dynamic spectrum and reveal a magnetic mirror effect in coronal loops. Here, we report a well-observed N-shaped burst consisting of three successive branches at metric wavelength with both fundamental and harmonic components and a high brightness temperature (>10 9 K). We verify the burst as a true type N burst generated by the same electron beam from three aspects of the data. First, durations of the three branches at a given frequency increase gradually and may be due to the dispersion of the beam along its path. Second, the flare site, as the only possible source of non-thermal electrons, is near the western feet of large-scale closed loops. Third, the first branch and the following two branches are localized at different legs of the loops with opposite senses of polarization. We also find that the sense of polarization of the radio burst is in contradiction to the O-mode and there exists a fairly large time delay (~3–5 s) between the fundamental and harmonic components. Possible explanations accounting for these observations are presented. Finally, assuming the classical plasma emission mechanism, we can infer coronal parameters such as electron density and magnetic field near the radio source and make diagnostics on the magnetic mirror process.

79 ASTRONOMY AND ASTROPHYSICS↗

OBSERVATIONAL EVIDENCE OF RESONANTLY DAMPED PROPAGATING KINK WAVES IN THE SOLAR CORONA

In this Letter, we establish clear evidence for the resonant absorption damping mechanism by analyzing observational data from the novel Coronal Multi-Channel Polarimeter. This instrument has established that in the solar corona there are ubiquitous propagating low-amplitude ({approx}1 km s{sup -1}) Alfvenic waves with a wide range of frequencies. Realistically interpreting these waves as the kink mode from magnetohydrodynamic wave theory, they should exhibit a frequency-dependent damping length due to resonant absorption, governed by the Terradas-Goossens-Verth relation showing that transverse plasma inhomogeneity in coronal magnetic flux tubes causes them to act as natural low-pass filters. It is found that the observed frequency dependence on damping length (up to about 8 mHz) can be explained by the kink wave interpretation; and furthermore, the spatially averaged equilibrium parameter describing the length scale of transverse plasma density inhomogeneity over a system of coronal loops is consistent with the range of values estimated from Transition Region and Coronal Explorer observations of standing kink modes.

79 ASTRONOMY AND ASTROPHYSICS↗

OBSERVED DAMPING OF THE SLOW MAGNETOACOUSTIC MODE

Spectroscopic and stereoscopic imaging observations of slow magnetoacoustic wave propagation within a coronal loop are investigated to determine the decay length scale of the slow magnetoacoustic mode in three dimensions and the density profile within the loop system. The slow wave is found to have an e-folding decay length scale of 20,000{sup +4000}{sub -3000} km with a uniform density profile along the loop base. These observations place quantitative constraints on the modeling of wave propagation within coronal loops. Theoretical forward modeling suggests that magnetic field line divergence is the dominant damping factor and thermal conduction is insufficient, given the observed parameters of the coronal loop temperature, density, and wave mode period.

79 ASTRONOMY AND ASTROPHYSICS↗

THE HYDRODYNAMIC EVOLUTION OF IMPULSIVELY HEATED CORONAL LOOPS: EXPLICIT ANALYTICAL APPROXIMATIONS

We derive simple analytical approximations (in explicit form) for the hydrodynamic evolution of the electron temperature T(s, t) and electron density n(s, t), for one-dimensional coronal loops that are subject to impulsive heating with subsequent cooling. Our analytical approximations are derived from first principles, using (1) the hydrodynamic energy balance equation, (2) the loop scaling laws of Rosner-Tucker-Vaiana and Serio, (3) the Neupert effect, and (4) the Jakimiec relationship. We compare our analytical approximations with 56 numerical cases of time-dependent hydrodynamic simulations from a parametric study of Tsiklauri et al., covering a large parameter space of heating rates, heating timescales, heating scale heights, loop lengths, for both footpoint and apex heating, mostly applicable to flare conditions. The average deviations from the average temperature and density values are typically {approx}20% for our analytical expressions. The analytical approximations in explicit form provide an efficient tool to mimic time-dependent hydrodynamic simulations, to model observed soft X-rays and extreme-ultraviolet light curves of heated and cooling loops in the solar corona and in flares by forward fitting, to model microflares, to infer the coronal heating function from light curves of multi-wavelength observations, and to provide physical models of differential emission measure distributions for solar and stellar flares, coronae, and irradiance.

79 ASTRONOMY AND ASTROPHYSICS↗

COMPARING SPATIAL DISTRIBUTIONS OF SOLAR PROMINENCE MASS DERIVED FROM CORONAL ABSORPTION

In a previous study, Gilbert et al. derived the column density and total mass of solar prominences using a new technique, which measures how much coronal radiation in the Fe XII (195 A) spectral band is absorbed by prominence material, while considering the effects of both foreground and background radiation. In the present work, we apply this method to a sample of prominence observations in three different wavelength regimes: one in which only H{sup 0} is ionized (504 A < {lambda} < 911 A), a second where both H{sup 0} and He{sup 0} are ionized (228 A < {lambda} < 504 A), and finally at wavelengths where H{sup 0}, He{sup 0}, and He{sup +} are all ionized ({lambda} < 228 A). This approach, first suggested by Kucera et al., permits the separation of the contributions of neutral hydrogen and helium to the total column density in prominences. Additionally, an enhancement of the technique allowed the calculation of the two-dimensional (2D) spatial distribution of the column density from the continuum absorption in each extreme-ultraviolet observation. We find the total prominence mass is consistently lower in the 625 A observations compared to lines in the other wavelength regimes. There is a significant difference in total mass between the 625 A and 195 A lines, indicating the much higher opacity at 625 A is causing a saturation of the continuum absorption and thus, a potentially large underestimation of mass.

79 ASTRONOMY AND ASTROPHYSICS↗

The role of active region coronal magnetic field in determining coronal mass ejection propagation direction

We study the role of the coronal magnetic field configuration of an active region (AR) in determining the propagation direction of a coronal mass ejection (CME). The CME occurred in the AR 11944 (S09W01) near the disk center on 2014 January 7 and was associated with an X1.2 flare. A new CME reconstruction procedure based on a polarimetric technique is adopted, which shows that the CME changed its propagation direction by around 28° in latitude within 2.5 R{sub ⊙} and 43° in longitude within 6.5 R{sub ⊙} with respect to the CME source region. This significant non-radial motion is consistent with the finding of Möstl et al. We use nonlinear force-free field and potential field source surface extrapolation methods to determine the configurations of the coronal magnetic field. We also calculate the magnetic energy density distributions at different heights based on the extrapolations. Our results show that the AR coronal magnetic field has a strong influence on the CME propagation direction. This is consistent with the “channeling” by the AR coronal magnetic field itself, rather than deflection by nearby structures. These results indicate that the AR coronal magnetic field configuration has to be taken into account in order to determine CME propagation direction correctly.

79 ASTRONOMY AND ASTROPHYSICS↗

FORWARD MODELING CAVITY DENSITY: A MULTI-INSTRUMENT DIAGNOSTIC

The thermodynamic properties of coronal prominence cavities present a unique probe into the energy and mass budget of prominences. Using a three-dimensional morphological model, we forward model the polarization brightness and extreme-ultraviolet (EUV) emission of a cavity and its surrounding streamer. Using a genetic algorithm, we find the best-fit density model by comparing the models to Mauna Loa Solar Observatory MK4 and Hinode EUV Imaging Spectrometer data. The effect of temperature variations on the derived density is also measured. We have measured the density inside a cavity down to 1.05 R{sub sun} with height-dependent error bars. Our forward modeling technique compensates for optically thin projection effects. This method provides a complementary technique to traditional line ratio diagnostics that is useful for diffuse off-limb coronal structures.

79 ASTRONOMY AND ASTROPHYSICS↗

TWO-STEP EMERGENCE OF THE MAGNETIC FLUX SHEET FROM THE SOLAR CONVECTION ZONE

We perform two-dimensional magnetodydrodynamic simulations of the flux emergence from the solar convection zone to the corona. The flux sheet is initially located moderately deep in the adiabatically stratified convection zone (-20,000 km) and is perturbed to trigger the Parker instability. The flux rises through the solar interior due to the magnetic buoyancy, but suffers a gradual deceleration and a flattening in the middle of the way to the surface since the plasma piled on the emerging loop cannot pass through the convectively stable photosphere. As the magnetic pressure gradient enhances, the flux becomes locally unstable to the Parker instability so that the further evolution to the corona occurs. The second-step nonlinear emergence is well described by the expansion law by Shibata et al. To investigate the condition for this 'two-step emergence' model, we vary the initial field strength and the total flux. When the initial field is too strong, the flux exhibits the emergence to the corona without a deceleration at the surface and reveals an unrealistically strong flux density at each footpoint of the coronal loop, while the flux either fragments within the convection zone or cannot pass through the surface when the initial field is too weak. The condition for the 'two-step emergence' is found to be 10{sup 21}-10{sup 22} Mx with 10{sup 4} G at z = -20,000 km. We present some discussions in connection with recent observations and the results of the thin-flux-tube model.

79 ASTRONOMY AND ASTROPHYSICS↗

Observing the formation of flare-driven coronal rain

Flare-driven coronal rain can manifest from rapidly cooled plasma condensations near coronal loop tops in thermally unstable postflare arcades. We detect five phases that characterize the postflare decay: heating, evaporation, conductive cooling dominance for ∼120 s, radiative/enthalpy cooling dominance for ∼4700 s, and finally catastrophic cooling occurring within 35–124 s, leading to rain strands with a periodicity of 55–70 s. We find an excellent agreement between the observations and model predictions of the dominant cooling timescales and the onset of catastrophic cooling. At the rain-formation site, we detect comoving, multithermal rain clumps that undergo catastrophic cooling from ∼1 MK to ∼22,000 K. During catastrophic cooling, the plasma cools at a maximum rate of 22,700 K s{sup −1} in multiple loop-top sources. We calculated the density of the extreme-ultraviolet (EUV) plasma from the differential emission measure of the multithermal source employing regularized inversion. Assuming a pressure balance, we estimate the density of the chromospheric component of rain to be 9.21 × 10{sup 11} ± 1.76 × 10{sup 11} cm{sup −3}, which is comparable with quiescent coronal rain densities. With up to eight parallel strands in the EUV loop cross section, we calculate the mass loss rate from the postflare arcade to be as much as 1.98 × 10{sup 12} ± 4.95 × 10{sup 11} g s{sup −1}. Finally, we reveal a close proximity between the model predictions of 10{sup 5.8} K and the observed properties between 10{sup 5.9} and 10{sup 6.2} K, which defines the temperature onset of catastrophic cooling. The close correspondence between the observations and numerical models suggests that indeed acoustic waves (with a sound travel time of 68 s) could play an important role in redistributing energy and sustaining the enthalpy-based radiative cooling.

79 ASTRONOMY AND ASTROPHYSICS↗

SAUSAGE WAVES IN TRANSVERSELY NONUNIFORM MONOLITHIC CORONAL TUBES

We investigate fast sausage waves in a monolithic coronal magnetic tube, modeled as a local density inhomogeneity with a continuous radial profile. This work is a natural extension of our previous results, obtained for a slab loop model for the case of cylindrical geometry. Using Kneser’s oscillating theorem, we provided the criteria for the existence of trapped and leaky wave regimes as a function of the profile features. For a number of density profiles there are only trapped modes for the entire range of longitudinal wave numbers. The phase speed of these modes tends toward the external Alfvén speed in the long wavelength limit. The generalized results were supported by the analytic solution of the wave equation for the specific density profiles. The approximate Wentzel–Kramers–Brillouin solutions allowed us to obtain the desired dispersion relations and to study their properties as a function of the profile parameters. The multicomponent quasi-periodic pulsations in flaring loops, observed on 2001 May 2 and 2002 July 3, are interpreted in terms of the transversely fundamental trapped fast sausage mode with several longitudinal harmonics in a smooth coronal waveguide.

79 ASTRONOMY AND ASTROPHYSICS↗

Theoretical quantification of shock-timing sensitivities for direct-drive inertial confinement fusion implosions on OMEGA

Using temporally shaped laser pulses, multiple shocks can be launched in direct-drive inertial confinement fusion implosion experiments to set the shell on a desired isentrope or adiabat. The velocity of the first shock and the times at which subsequent shocks catch up to it are measured through the VISAR diagnostic on OMEGA. Simulations reproduce these velocity and shock-merger time measurements when using laser pulses designed for setting mid-adiabat (α ~ 3) implosions, but agreement degrades for lower-adiabat (α ~ 1) designs. Several possibilities for this difference are studied: errors in placing the target at the center of irradiation (target offset), variations in energy between the different incident beams (power imbalance), and errors in modeling the laser energy coupled into the capsule. Simulation results indicate that shock timing is most sensitive to details of the density and temperature profiles in the coronal plasma, which influences the laser energy coupled into the target, and only marginally sensitive to target offset and beam power imbalance. A new technique under development to infer coronal profiles using x-ray self-emission imaging can be applied to the pulse shapes used in shock-timing experiments. In conclusion, this will help identify improved physics models to implement in codes and consequently enhance shock-timing predictive capability for low-adiabat pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of the Electron Density Variation During the 21 August 2017 Solar Eclipse

Abstract This paper presents a comparison of modeled and measured electron densities for the 21 August 2017 solar eclipse across the USA. The location of the instrument was (43.81°N, 247.32°E) where the maximum obscuration of 99.6% occurred at 17.53 hr UT on 21 August. The solar apparent time was 9.96 hr, and the duration of the eclipse was 2.7 hr. It was found that if it is assumed that there are no chromosphere emissions at totality, ~30% coronal emission remaining at totality gave the best fit to the electron density variation at 150 km. The 30% coronal emission estimate has uncertainties associated with respect to uncertainties in the solar spectrum, the measured electron density, and the amount of chromosphere emissions remaining at totality. The agreement between the modeled and measured electron densities is excellent at 150 km with the assumed 30% coronal emission at totality. At other altitudes, the agreement is very good, but the altitude profile would be improved if the model peak electron density ( N m F 2 ) decayed more slowly to better match the data. The minimum N m F 2 in the model occurs ~10 min after totality when it decreases to 0.55 from its noneclipse value. The minimum of the N m F 2 data occurs between 6 and 10 min after totality but is ~15% larger. The total electron content decreases to 0.65 of its preeclipse value. These relative changes agree well with those predicted by others prior to the eclipse.

Reinisch, B. W.↗

THE TEMPERATURE AND DENSITY STRUCTURE OF THE SOLAR CORONA. I. OBSERVATIONS OF THE QUIET SUN WITH THE EUV IMAGING SPECTROMETER ON HINODE

Measurements of the temperature and density structure of the solar corona provide critical constraints on theories of coronal heating. Unfortunately, the complexity of the solar atmosphere, observational uncertainties, and the limitations of current atomic calculations, particularly those for Fe, all conspire to make this task very difficult. A critical assessment of plasma diagnostics in the corona is essential to making progress on the coronal heating problem. In this paper, we present an analysis of temperature and density measurements above the limb in the quiet corona using new observations from the EUV Imaging Spectrometer (EIS) on Hinode. By comparing the Si and Fe emission observed with EIS we are able to identify emission lines that yield consistent emission measure distributions. With these data we find that the distribution of temperatures in the quiet corona above the limb is strongly peaked near 1 MK, consistent with previous studies. We also find, however, that there is a tail in the emission measure distribution that extends to higher temperatures. EIS density measurements from several density sensitive line ratios are found to be generally consistent with each other and with previous measurements in the quiet corona. Our analysis, however, also indicates that a significant fraction of the weaker emission lines observed in the EIS wavelength ranges cannot be understood with current atomic data.

99 GENERAL AND MISCELLANEOUS↗

GLOBAL SAUSAGE OSCILLATION OF SOLAR FLARE LOOPS DETECTED BY THE INTERFACE REGION IMAGING SPECTROGRAPH

An observation from the Interface Region Imaging Spectrograph reveals coherent oscillations in the loops of an M1.6 flare on 2015 March 12. Both the intensity and Doppler shift of Fe xxi 1354.08 Å show clear oscillations with a period of ∼25 s. Remarkably similar oscillations were also detected in the soft X-ray flux recorded by the Geostationary Operational Environmental Satellites ( GOES ). With an estimated phase speed of ∼2420 km s{sup −1} and a derived electron density of at least 5.4 × 10{sup 10} cm{sup −3}, the observed short-period oscillation is most likely the global fast sausage mode of a hot flare loop. We find a phase shift of ∼ π /2 (1/4 period) between the Doppler shift oscillation and the intensity/ GOES oscillations, which is consistent with a recent forward modeling study of the sausage mode. The observed oscillation requires a density contrast between the flare loop and coronal background of a factor ≥42. The estimated phase speed of the global mode provides a lower limit of the Alfvén speed outside the flare loop. We also find an increase of the oscillation period, which might be caused by the separation of the loop footpoints with time.

79 ASTRONOMY AND ASTROPHYSICS↗

PUTTING CORONAL SEISMOLOGY ESTIMATES OF THE MAGNETIC FIELD STRENGTH TO THE TEST

The magnetic field strength inside a model coronal loop is 'estimated' using coronal seismology, to examine the reliability of magnetic field strengths derived from observed, transverse coronal loop oscillations. Three-dimensional numerical simulations of the interaction of an external pressure pulse with a coronal loop (modeled as a three-dimensional density enhancement inside a two-dimensional magnetic arcade) are analyzed and the 'observed' properties of the excited transverse loop oscillations are used to derive the value of the local magnetic field strength, following the method of Nakariakov and Ofman. Due to the (unexpected) change in periodicity, the magnetic field derived from our 'observed' oscillation is substantially different from the actual (input) magnetic field value (approximately 50%). Coronal seismology can derive useful information about the local magnetic field, but the combined effect of the loop curvature, the density ratio, and aspect ratio of the loop appears to be more important than previously expected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

OBSERVATIONS AND INTERPRETATION OF A LOW CORONAL SHOCK WAVE OBSERVED IN THE EUV BY THE SDO/AIA

Taking advantage of both the high temporal and spatial resolutions of the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory, we studied a limb coronal shock wave and its associated extreme ultraviolet (EUV) wave that occurred on 2010 June 13. Our main findings are: (1) the shock wave appeared clearly only in the channels centered at 193 A and 211 A as a dome-like enhancement propagating ahead of its associated semi-spherical coronal mass ejection (CME) bubble; (2) the density compression of the shock is 1.56 according to radio data and the temperature of the shock is around 2.8 MK; (3) the shock wave first appeared at 05:38 UT, 2 minutes after the associated flare has started and 1 minute after its associated CME bubble appeared; (4) the top of the dome-like shock wave set out from about 1.23 R{sub sun} and the thickness of the shocked layer is {approx}2 x 10{sup 4} km; (5) the speed of the shock wave is consistent with a slight decrease from about 600 km s{sup -1} to 550 km s{sup -1}; and (6) the lateral expansion of the shock wave suggests a constant speed around 400 km s{sup -1}, which varies at different heights and directions. Our findings support the view that the coronal shock wave is driven by the CME bubble, and the on-limb EUV wave is consistent with a fast wave or at least includes the fast wave component.

79 ASTRONOMY AND ASTROPHYSICS↗

DETERMINATION OF NON-THERMAL VELOCITY DISTRIBUTIONS FROM SERTS LINEWIDTH OBSERVATIONS

Non-thermal velocities obtained from the measurement of coronal Extreme Ultraviolet (EUV) linewidths have been consistently observed in solar EUV spectral observations and have been theorized to result from many plausible scenarios including wave motions, turbulence, or magnetic reconnection. Constraining these velocities can provide a physical limit for the available energy resulting from unresolved motions in the corona. We statistically determine a series of non-thermal velocity distributions from linewidth measurements of 390 emission lines from a wide array of elements and ionization states observed during the Solar Extreme Ultraviolet Research Telescope and Spectrograph 1991-1997 flights covering the spectral range 174-418 A and a temperature range from 80,000 K to 12.6 MK. This sample includes 248 lines from active regions, 101 lines from quiet-Sun regions, and 41 lines were observed from plasma off the solar limb. We find a strongly peaked distribution corresponding to a non-thermal velocity of 19-22 km s{sup -1} in all three of the quiet-Sun, active region, and off-limb distributions. For the possibility of Alfven wave resonance heating, we find that velocities in the core of these distributions do not provide sufficient energy, given typical densities and magnetic field strengths for the coronal plasma, to overcome the estimated coronal energy losses required to maintain the corona at the typical temperatures working as the sole mechanism. We find that at perfect efficiency 50%-60% of the needed energy flux can be produced from the non-thermal velocities measured.

79 ASTRONOMY AND ASTROPHYSICS↗