Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conifer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Data from: Soil carbon change in intensive agriculture after 25 years of conservation management

Changes in soil organic carbon (SOC) and nitrogen (SON) are strongly affected by land management, but few long-term comparative studies have surveyed changes throughout the whole soil profile. We quantified 25-year SOC and SON changes to 1 m in 10 replicate ecosystems at an Upper Midwest, USA site. We compared four annual cropping systems in maize ( Zea mays )-soybean ( Glycine max)-winter wheat ( Triticum aestivum ) rotations, each managed differently (Conventional, No-till, Reduced input, and Biologically based); in three managed perennial systems (hybrid Poplar ( Populus × euramericana ), Alfalfa ( Medicago sativa ), and Conifer ( Pinus spp.); and in three successional systems (Early, Mid- and Late succession undergoing a gradual change in species composition and structure over time).

agricultural sciences↗

Remote sensing of changes in morphology and physiology of trees under stress

Results of continuing studies of forest trees subjected to varying types of stress are reported. Both greenhouse and field studies are included. Greenhouse work with tree seedlings exposed to varying levels of NaCl and CaCl2 in the soil indicated that, in the initial stages, palisade cells shrink and the amount of air space in the leaf increases. As the severity of damage increases, the cells of the spongy mesophyll shrink and flatten, and the amount of air space in the leaf decreases. Statistical analysis of foliar reflectance and associated moisture content data led to a series of regression equations for predicting foliar moisture content from reflectance data. Equations were calculated for three species, yellow birch (Betula alleghaniensis Britton), sugar maple (Acer saccharum Marsh.) and white ash (Fraxinus americana L.) having multiple correlation coefficients of 0.98, 0.94 and 0.93 respectively. Interpretation of multispectral imagery of the Ann Arbor Forestry Test Site (NASA Site 190) provided evidence that infections of Fomes annosus can be detected in the early stages. Infections of two needle cast diseases were also detected in conifer plantations in the test site. A study of automatic interpretation of multispectral scanner imagery for tree species recognition provided encouraging results.

Olson, C. E., Jr.↗

Central Atlantic regional ecological test site: A prototype regional environmental information system

The author has identified the following significant results. A comparison of photomorphic regions from an uncontrolled ERTS-1 mosaic of CARETS to land use areas on a map published in the National Atlas revealed close correlations in non-urban regions. Such regional scale analysis of ERTS-1 data has the potential for providing an economical sampling strategy for selecting sites for more detailed field measurements if other environmental variables can be correlated with patterns on ERTS-1 imagery. ERTS-1 imagery has also revealed for the first time the appearance of CARETS during the winter months. Investigators have identified extensive areas of conifers, which have previously been indistinguishable from deciduous vegetation. Imagery has also shown very clearly the extent of snow cover at a particular time over the region. The evaluation of ERTS-1 imagery used for the land use mapping of the shore zone of CARETS, has shown that the presence or absence of elements of an hierarchal system of shoreline landforms can help identify areas of potential rapid change. Changes in land use class distributions on the Barrier Islands signify the environmental response to natural and man-caused processes. Both environmental vulnerability and sensitivity can be estimated from the repetitive ERTS-1 coverage of long reaches of the CARETS coast. Results indicate potential applications to land use planning, management, and regional environmental quality analysis.

Alexander, R. H.↗

Evaluation of usefulness of Skylab EREP S-190 and S-192 imagery in multistage forest surveys

The author has identified the following significant results. A high-flight U-2 imagery (1:120,000) volume interpretation model was developed which could be used to explain 50% of the volume variation occurring on the ground. Two interpreters interpreted 40 GLO land sections with known timber volume in terms of eight variables that could be estimated from the imagery. A multiple regression study was performed to relate the interpreted variables to the ground volumes. It was found that the best model consisted of two basic variables and their squares, namely: (1) the percentage of large trees, and (2) the crown density of the conifers on the parcel. The multiple correlation coefficient was 0.694 for this model.

Langley, P. G.↗

Automatic photointerpretation for land use management in Minnesota

The author has identified the following significant results. The Minnesota Iron Range area was selected as one of the land use areas to be evaluated. Six classes were selected: (1) hardwood; (2) conifer; (3) water (including in mines); (4) mines, tailings and wet areas; (5) open area; and (6) urban. Initial classification results show a correct classification of 70.1 to 95.4% for the six classes. This is extremely good. It can be further improved since there were some incorrect classifications in the ground truth.

Swanlund, G. D.↗

The applicability of ERTS-1 data covering the major landforms of Kenya

The author has identified the following significant results. Five investigators report on the applicability of ERTS-1 data covering the major landforms of Kenya. Deficiencies due to lack of equipment, repetitive coverage and interpretation know-how are also reported on. Revision of lake shorelines is an immediate benefit. Basement system metasediments are rapidly differentiated, but dune areas are not readily distinguishable from sandy soils. Forest, moorland, high altitude grass, tea, and conifer plantations are readily distinguished, with podocarpus forest especially distinguishable from podocarpus/juniperus forest. In the arid areas physiographic features, indicating the major soil types, are readily identified and mapped. Preliminary vegetation type analysis in the Mara Game Reserve indicates that in a typical savannah area about 36% of the vegetation types are distinguishable at a scale of 1:1 million as well as drainage patterns and terrain features.

Omino, J. H. O.↗

Application of ERTS-1 imagery and underflight photography in the detection and monitoring of forest insect infections in the Sierra Nevada Mountains of California

The author has identified the following significant results. Analysis of ERTS-1 imagery with underflight aerial photo support including U-2, in the Sierra Nevada Mountains of California, indicates promising possibilities of detecting and monitoring forest insect outbreaks visually with some mechanical support utilizing the VP-8 image analyzer. Visually, it is possible at a scale of 1:1,000,000 to discriminate between large areas of damaged and undamaged forests; timbered and non-timbered areas; pasture land and cultivated fields; desert and riparian vegetation. At a scale of 1:80,000 it is possible to distinguish among three classes of tree mortality; defoliated and undefoliated areas; non-host mixed conifers; and mountain meadows, rock domes, lakes and glaciers. Machine tests showed significant differences in image densities among various bands and mortality areas.

Hall, R. C.↗

Applicability of ERTS-1 to Montana geology

The author has identified the following significant results. Late autumn imagery provides the advantages of topographic shadow enhancement and low cloud cover. Mapping of rock units was done locally with good results for alluvium, basin fill, volcanics, inclined Paleozoic and Mesozoic beds, and host strata of bentonite beds. Folds, intrusive domes, and even dip directions were mapped where differential erosion was significant. However, mapping was not possible for belt strata, was difficult for granite, and was hindered by conifers compared to grass cover. Expansion of local mapping required geologic control and encountered significant areas unmappable from ERTS imagery. Annotation of lineaments provided much new geologic data. By extrapolating test site comparisons, it is inferred that 27 percent of some 1200 lineaments mapped from western Montana represent unknown faults. The remainder appear to be localized mainly by undiscovered faults and sets of minor faults or joints.

Weidman, R. M.↗

The use of four band multispectral photography to identify forest cover types

Four-band multispectral aerial photography and a color additive viewer were employed to identify forest cover types in Northern Alabama. The multispectral photography utilized the blue, green, red and near-infrared spectral regions and was made with black and white infrared film. On the basis of color differences alone, a differentiation between conifers and hardwoods was possible; however, supplementary information related to forest ecology proved necessary for the differentiation of various species of pines and hardwoods.

Downs, S. W., Jr.↗

Use of manual densitometry in land cover classification

Through use of manual spot densitometry values derived from multitemporal 1:24,000 color infrared aircraft photography, areas as small as one hectare in the Cumberland Plateau in Kentucky were accurately classified into one of eight ground cover groups. If distinguishing between undisturbed and disturbed forest areas is the sole criterion of interest, classification results are highly accurate if based on imagery taken during foliated ground cover conditions. Multiseasonal imagery analysis was superior to single data analysis, and transparencies from prefoliated conditions gave better separation of conifers and hardwoods than did those from foliated conditions.

Jordan, D. C.↗

The application of LANDSAT remote sensing technology to natural resources management. Section 1: Introduction to VICAR - Image classification module. Section 2: Forest resource assessment of Humboldt County.

A teaching module on image classification procedures using the VICAR computer software package was developed to optimize the training benefits for users of the VICAR programs. The field test of the module is discussed. An intensive forest land inventory strategy was developed for Humboldt County. The results indicate that LANDSAT data can be computer classified to yield site specific forest resource information with high accuracy (82%). The "Douglas-fir 80%" category was found to cover approximately 21% of the county and "Mixed Conifer 80%" covering about 13%. The "Redwood 80%" resource category, which represented dense old growth trees as well as large second growth, comprised 4.0% of the total vegetation mosaic. Furthermore, the "Brush" and "Brush-Regeneration" categories were found to be a significant part of the vegetative community, with area estimates of 9.4 and 10.0%.

Fox, L., III↗

Land-cover classification of California using mosaicking and high-speed processing

A land cover classification of Landsat MSS data has been made for the entire state of California. Digital mosaicking of 32 Landsat scenes with registered digital elevation, slope, and aspect was prepared. Stratified unsupervised clustering generated the spectral classes which were identified into 16 categories, mostly forest types, using U-2 CIR photos. A verification using 81 primary sample units resulted in a forest/nonforest accuracy of 80.2% and a commercial conifer and hardwood accuracy of 75.1%. The results are now being used in many projects throughout the state.

Peterson, D. L.↗

Computer classified Landsat data used as a forest stratifier

Results of two forest stratification projects are presented to show that Landsat data, when combined with guided clustering techniques, can provide detailed stratification of forest environment. It is shown that conifer species groupings, vegetative cover classes, and three size classes can be discriminated with accuracies ranging from 83 to 91%.

Fox, L., III↗

Identifying environmental features for land management decisions

Advances in digital processing of LANDSAT imagery and in the interpretation of aerial photography are reported as well as the development of a geographic information system and the acquisition of cartographic equipment. Services to technical specialists and dignitaries are also described. The status of the following studies is discussed: Farmington Bay waterfowl; Sevier River wetland and agriculture; Davis County foothill development; Bear River Range aspen habitat; Wasatch-Cache riparian habitats; irrigated acreage in the Bear River Basin; the Parker Mountain rangeland inventory; and the development of techniques for inventorying aspen and aspen conifer stands. The cooperative project with NASA-Ames to verify LANDSAT digital maps of the forest and range resources on the LaSal Mountains is also considered.

Source record↗

LANDSAT applications by the Adirondack Park Agency for land cover analyses and forest cover change

The New York State Adirondack Park Agency is using LANDSAT imagery to provide current, consistent parkwide data on forest cover, forest change and other land cover characteristics for the Adirondack Park, an area of 9,375 sq. miles (24,280 sq km). Boundaries of the study area were digitized and the data were enhanced and geographically rectified. A classification scheme was devised which emphasized the basic land cover types of the Park: hardwoods, spruce-fir, pine, wet conifer, brushland, grassland, agricultural areas, exposed earth, urban areas, and water bodies. Cover type classifications for disturbed forest land were also chosen: cut hardwoods, regenerating hardwoods, and cut spruce fir. Field verification of 1978 classification revealed an accurate differentiation of forest types within types and between nonforested/forested areas. The classification accurately detects forest land disturbances; however, it is not always descriptive of the level of disturbance.

Banta, J. S.↗

Development and testing of LANDSAT-assisted procedures for cost-effective forest management

The capability of LANDSAT data to make certain forest management activities on the Clearwater National Forest in Idaho more efficient and/or more effective was examined. One task was designed to evaluate the utility of single-date categorized LANDSAT data as a source of land cover information for use in assessing elk habitat quality. LANDSAT data was used to categorize conifer forest on the basis of the percentage crown closure. This information was used to evaluate elk habitat quality on the basis of the ratio of cover to forage. A preliminary conclusion is that categorized LANDSAT data can be helpful for assessing current elk habitat quality if the relationships between crown closure and hiding cover can be adequately defined. Another task was designed to evaluate the utility of merged two-date LANDSAT data for updating the existing (1972) Clearwater Forest land cover information. LANDSAT data from 1972 and 1981 were merged, and change images were created. These products indicated where major changes were taking place. These areas could then be examined on aerial photography or in the field to further characterize the nature and magnitude of the change. The 1972 land cover information could be subsequently altered in these changed areas, whereas areas with no change would not have to be re-examined.

Colwell, J. E.↗

Development of LANDSAT Derived Forest Cover Information for Integration into Adirondack Park GIS

Based upon observed changes in timber harvest practices partially attributable to forest biomass removable for energy supply purposes, the Adirondack Park Agency began in 1979 a multi-year project to implement a digital geographic information system (GIS). An initial developmental task was an inventory of forest cover information and analysis of forest resource change and availability. While developing the GIS, a pilot project was undertaken to evaluate the usefulness of LANDSAT derived land cover information for this purpose, and to explore the integration of LANDSAT data into the GIS. The prototype LANDSAT analysis project involved: (1) the use of both recent and historic data to derive land cover information for two dates; and (2) comparison of land cover over time to determine quantitative and geographic changes. The "recent data," 1978 full foliage data over portions of four LANDSAT scenes, was classified, using ground truth derived training samples in various forested and non-forested categories. Forested categories include the following: northern hardwoods, pine, spruce-fir, and pine plantation, while nonforested categories include wet-conifer, pasture, grassland, urban, exposed soil, agriculture, and water.

Curran, R. P.↗