Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “clustering algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Atmospheric Effects on Remote Sensing of the Earth's Surface

The main causes and magnitude of the atmospheric effects on remote sensing of the Earth's surface are determined. Theoretical study as well as measurements are included. The knowledge gained from this study will be used to develop atmospheric correction algorithms and to test them with satellite data. In a theoretical investigation of the relative effects of the aerosol optical thickness, absorption, and size distribution on remote sensing, it was found that aerosol absorption has a significant effect on satellite measurements of surface reflectivity. The absorption effect is stronger for high than for low surface reflectances. The aerosol optical thickness is dominant for small surface reflectances. The accuracy of clustering algorithms depends on both parameters. The vegetation index, however, is affected by the optical thickness but only weakly affected by the absorption. A laboratory simulation of the atmospheric effect on the radiance of sunlight scattered from the Earth's surface-atmosphere system was performed. This experiment verified the existence of the adjacency effect (the effect of a bright field on the radiance detected above a dark field) and was used to test 3-D radiative transfer models. In a theoretical study it was found that atmospheric scattering resulting from the adjacency effect reduces the separability between surface classes.

Fraser, R. E.↗
NASA NTRS1973

Analysis of usefulness of ERTS-1 MSS data in detecting and measuring coastal marshes

The author has identified the following significant results. The usefulness of ERTS-1 data in detecting and measuring coastal marshes has been analyzed. The data chosen for study was taken over the Houston Area Test Site on August 29, 1972. A study site was selected which contained marshes of varying size. Using a computerized clustering algorithm which groups areas of spectral homogeneity, it was possible to distinguish twenty-five classes or features. To determine the total acreage of the marshes, the pure picture elements were counted. Using a technique developed by the team, the boundary picture elements were also counted. Ground truth was provided from rectified, enlarged, and scaled high altitude aircraft photography acquired during the same time frame. Comparison of the ground truth coverage depicted by the aircraft photography to the clustering acreage displayed from the ERTS-1 data showed a percentage of accuracy ranging from 89% to 99% for determining areal extent of coastal marshes.

Erb, R. B.↗
NASA NTRS2024

Synergistic Retrievals of Ice in High Clouds From Elastic Backscatter Lidar, Ku-band Radar and Submillimeter Wave Radiometer Observations

In this study, we investigate the synergy of elastic backscatter lidar, Ku-band radar, and sub-millimeter-wave radiometer measurements in the retrieval of ice from satellite observations. The synergy is analyzed through the generation of a large dataset of IceWater Content (IWC) profiles and simulated lidar, radar and radiometer observations. The characteristics of the instruments e.g. frequencies, sensitivities, etc. are set based on the expected characteristics of instruments of the Atmosphere Observing System (AOS) mission. A hold-out validation methodology is used to assess the accuracy of the IWC profiles retrieved from various combinations of observations from the three instruments. Specifically, the IWC and associated observations are randomly divided into two datasets, one for training and the other for evaluation. The training dataset is used to train the retrieval algorithm, while the evaluation dataset is used to assess the retrieval performance. The dataset of IWC profiles is derived from CloudSat reflectivity and CALIOP lidar observations. The retrieval of the ice water content IWC profiles from the computed observations is achieved in two steps. In the first step, a class, out of 18 potential classes characterized by different vertical distribution of IWC, is estimated from the observations. The 18 classes are predetermined based on the k-Means clustering algorithm. In the second step, the IWC profile is estimated using an Ensemble Kalman Smoother (EKS) algorithm that uses the estimated class as a priori information. The results of the study show that the synergy of lidar, radar, and radiometer observations is significant in the retrieval of the IWC profiles. Nevertheless, it should be mentioned that this synergy was found under idealized conditions, and additional work might be required to materialize it in practice. The inclusion of the lidar backscatter observations in the retrieval process has a larger impact on the retrieval performance than the inclusion of the radar observations. As ice clouds have a significant impact on atmospheric radiative processes, this work is relevant to ongoing efforts to reduce uncertainties in climate analyses and projections.

Mircea Grecu↗
NASA NTRS2010

Multivariate Methods for Prediction of Geologic Sample Composition with Laser-Induced Breakdown Spectroscopy

Laser-induced breakdown spectroscopy (LIBS) uses pulses of laser light to ablate a material from the surface of a sample and produce an expanding plasma. The optical emission from the plasma produces a spectrum which can be used to classify target materials and estimate their composition. The ChemCam instrument on the Mars Science Laboratory (MSL) mission will use LIBS to rapidly analyze targets remotely, allowing more resource- and time-intensive in-situ analyses to be reserved for targets of particular interest. ChemCam will also be used to analyze samples that are not reachable by the rover's in-situ instruments. Due to these tactical and scientific roles, it is important that ChemCam-derived sample compositions are as accurate as possible. We have compared the results of partial least squares (PLS), multilayer perceptron (MLP) artificial neural networks (ANNs), and cascade correlation (CC) ANNs to determine which technique yields better estimates of quantitative element abundances in rock and mineral samples. The number of hidden nodes in the MLP ANNs was optimized using a genetic algorithm. The influence of two data preprocessing techniques were also investigated: genetic algorithm feature selection and averaging the spectra for each training sample prior to training the PLS and ANN algorithms. We used a ChemCam-like laboratory stand-off LIBS system to collect spectra of 30 pressed powder geostandards and a diverse suite of 196 geologic slab samples of known bulk composition. We tested the performance of PLS and ANNs on a subset of these samples, choosing to focus on silicate rocks and minerals with a loss on ignition of less than 2 percent. This resulted in a set of 22 pressed powder geostandards and 80 geologic samples. Four of the geostandards were used as a validation set and 18 were used as the training set for the algorithms. We found that PLS typically resulted in the lowest average absolute error in its predictions, but that the optimized MLP ANN and the CC ANN often gave results comparable to PLS. Averaging the spectra for each training sample and/or using feature selection to choose a small subset of wavelengths to use for predictions gave mixed results, with degraded performance in some cases and similar or slightly improved performance in other cases. However, training time was significantly reduced for both PLS and ANN methods by implementing feature selection, making this a potentially appealing method for initial, rapid-turn-around analyses necessary for Chemcam's tactical role on MSL. Choice of training samples has a strong influence on the accuracy of predictions. We are currently investigating the use of clustering algorithms (e.g. k-means, neural gas, etc.) to identify training sets that are spectrally similar to the unknown samples that are being predicted, and therefore result in improved predictions

Morris, Richard↗
NASA NTRS1973

An objective technique to estimate percentage of an ERTS-1 water boundary resolution element covered by water

The author has identified the following significant results. An objective technique was developed to measure the surface area of water bodies. Nineteen water bodies in the Houston and Galveston, Texas area were selected as a basis for the technique development. The actual surface area of each body was determined from rectified and enlarged NASA aircraft photography. A clustering algorithm was used to produce classification maps of the region from ERTS-1 data. Certain classes were identified as being 100% water. Other classes were identified as being mixtures of water with land or vegetation. The number of picture elements falling on each water body and its boundary were counted. A linear regression analysis was performed to relate the total number of picture elements and boundary elements counted to the actual surface area. The standard error of the estimate was 6.7 acres. The absolute error was not a function of the actual surface area of the water body.

Erb, R. B.↗
NASA NTRS1973

Unsupervised classification and areal measurement of land and water coastal features on the Texas coast

Multispectral scanner (MSS) digital data from ERTS-1 was used to delineate coastal land, vegetative, and water features in two portions of the Texas Coastal Zone. Data (Scene ID's 1037-16244 and 1037-16251) acquired on August 29, 1972, were analyzed on NASA Johnson Space Center systems through the use of two clustering algorithms. Seventeen to 30 spectrally homogeneous classes were so defined. Many classes were identified as being pure features such as water masses, salt marsh, beaches, pine, hardwoods, and exposed soil or construction materials. Most classes were identified to be mixtures of the pure class types. Using an objective technique for measuring the percentage of wetland along salt marsh boundaries, an analysis was made of the accuracy of areal measurement of salt marshes. Accuracies ranged from 89 to 99 percent. Aircraft photography was used as the basis for determining the true areal size of salt marshes in the study sites.

Flores, L. M.↗
NASA NTRS1974

Automated thematic mapping and change detection of ERTS-1 images

Results of an automated thematic mapping investigation using ERTS-1 MSS images are presented. A diffraction pattern analysis of MSS images led to the development of spatial signatures for farm land, urban areas, and mountains. Four spatial features are employed to describe the spatial characteristics of image cells in the digital data. Three spectral features are combined with the spatial features to form a seven dimensional vector describing each cell. Then, the classification of the feature vectors is accomplished by using the maximum likelihood criterion. Three ERTS-1 images from the Phoenix, Arizona area were processed, and recognition rates between 85% and 100% were obtained for the terrain classes of desert, farms, mountains and urban areas. To eliminate the need for training data, a new clustering algorithm has also been developed.

Gramenopoulos, N.↗
NASA NTRS1974

Boundary and object detection in real world images

A solution to the problem of automatic location of objects in digital pictures by computer is presented. A self-scaling local edge detector which can be applied in parallel on a picture is described. Clustering algorithms and boundary following algorithms which are sequential in nature process the edge data to locate images of objects.

Yakimovsky, Y.↗
NASA NTRS1974

International Symposium on Remote Sensing of Environment, 9th, University of Michigan, Ann Arbor, Mich., April 15-19, 1974, Proceedings. Volumes 1, 2 & 3

The present work gathers together numerous papers describing the use of remote sensing technology for mapping, monitoring, and management of earth resources and man's environment. Studies using various types of sensing equipment are described, including multispectral scanners, radar imagery, spectrometers, lidar, and aerial photography, and both manual and computer-aided data processing techniques are described. Some of the topics covered include: estimation of population density in Tokyo districts from ERTS-1 data, a clustering algorithm for unsupervised crop classification, passive microwave sensing of moist soils, interactive computer processing for land use planning, the use of remote sensing to delineate floodplains, moisture detection from Skylab, scanning thermal plumes, electrically scanning microwave radiometers, oil slick detection by X-band synthetic aperture radar, and the use of space photos for search of oil and gas fields. Individual items are announced in this issue.

Source record↗
NASA NTRS1975

Design data collection with Skylab microwave radiometer-scatterometer S-193, volume 2

The author has identified the following significant results. Skylab S-193 radiometer/scatterometer produced terrain responses with various polarizations and observation angles for cells of 100 to 400 sq km area. Classification of the observations into natural categories was achieved by K-means and spatial clustering algorithms. Microwave data acquired over the Great Salt Lake Desert area by sensors aboard Skylab and Nimbus 5 indicate that the microwave emission and backscatter were strongly influenced by contributions from subsurface layers of sediment saturated with brine. Correlations were noted between microwave backscatter response at approximately 33 deg from scatterometer (operating at 13.9 GHz) and the configuration of ground targets in Brazil as discerned from coarse scale maps. With limited, available ground truth, these correlations were sufficient to permit the production of image-like displays which bear a marked resemblance to known terrain features in several instances.

Moore, R. K.↗
NASA NTRS1979

Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

Lennington, R. K.↗
NASA NTRS1978

Computer-aided analysis of Landsat data for surveying Texas coastal zone environments

The feasibility of using machine-aided processing of Landsat data to inventory environmental units was studied by analyzing geometrically corrected and spatially registered Landsat data collected over the Matagorda Bay area of the Texas coastal estuarine system. A clustering algorithm (nonsupervised processor) was used to divide the data into groups of sample points of similar spectral characteristics, and correlation of spectral classes with reference data on a point-to-point basis showed the coastal features exhibit unique spectral variations. Use of a maximum likelihood algorithm permitted discrimination of 13 terrestrial and aquatic environments.

Kristof, S. J.↗
NASA NTRS1981

Evaluating computer-drawn ground-cover maps

Computer-generated character maps from LANDSAT data are compared to aerial photos for test sites in Florida. Report Describes extraction of ground features by two analytical techniques: unsupervised clustering algorithm, called LANDSAT Signature Development Program (LSDP), and interactive algorithm based on multispectral image analyzer. Study concluded that computer classification of digital LANDSAT multispectral data, supplemented with certain ground-cover information, is valuable tool for analysis of renewable resources.

Arvanitis, L. G.↗
NASA NTRS1981

Evaluation of large area crop estimation techniques using LANDSAT and ground-derived data

The results of the Domestic Crops and Land Cover Classification and Clustering study on large area crop estimation using LANDSAT and ground truth data are reported. The current crop area estimation approach of the Economics and Statistics Service of the U.S. Department of Agriculture was evaluated in terms of the factors that are likely to influence the bias and variance of the estimator. Also, alternative procedures involving replacements for the clustering algorithm, the classifier, or the regression model used in the original U.S. Department of Agriculture procedures were investigated.

Amis, M. L.↗
NASA NTRS1981

Assembly language coding for CLASSY

A set of assembly language improvements to the CLASSY clustering algorithm were developed and tested. These are described in detail and analyzed.

Rassbach, M. E.↗
NASA NTRS1982

Comparing digital data processing techniques for surface mine and reclamation monitoring

The results of three techniques used for processing Landsat digital data are compared for their utility in delineating areas of surface mining and subsequent reclamation. An unsupervised clustering algorithm (ISOCLS), a maximum-likelihood classifier (CLASFY), and a hybrid approach utilizing canonical analysis (ISOCLS/KLTRANS/ISOCLS) were compared by means of a detailed accuracy assessment with aerial photography at NASA's Goddard Space Flight Center. Results show that the hybrid approach was superior to the traditional techniques in distinguishing strip mined and reclaimed areas.

Witt, R. G.↗
NASA NTRS1984

Anaysis of the quality of image data required by the LANDSAT-4 Thematic Mapper and Multispectral Scanner

The spatial, geometric, and radiometric qualities of LANDSAT 4 thematic mapper (TM) and multispectral scanner (MSS) data were evaluated by interpreting, through visual and computer means, film and digital products for selected agricultural and forest cover types in California. Multispectral analyses employing Bayesian maximum likelihood, discrete relaxation, and unsupervised clustering algorithms were used to compare the usefulness of TM and MSS data for discriminating individual cover types. Some of the significant results are as follows: (1) for maximizing the interpretability of agricultural and forest resources, TM color composites should contain spectral bands in the visible, near-reflectance infrared, and middle-reflectance infrared regions, namely TM 4 and TM % and must contain TM 4 in all cases even at the expense of excluding TM 5; (2) using enlarged TM film products, planimetric accuracy of mapped poins was within 91 meters (RMSE east) and 117 meters (RMSE north); (3) using TM digital products, planimetric accuracy of mapped points was within 12.0 meters (RMSE east) and 13.7 meters (RMSE north); and (4) applying a contextual classification algorithm to TM data provided classification accuracies competitive with Bayesian maximum likelihood.

Colwell, R. N.↗
NASA NTRS1984

Analysis methods for Thematic Mapper data of urban regions

Studies have indicated the difficulty in deriving a detailed land-use/land-cover classification for heterogeneous metropolitan areas with Landsat MSS and TM data. The major methodological issues of digital analysis which possibly have effected the results of classification are examined. In response to these methodological issues, a multichannel hierarchical clustering algorithm has been developed and tested for a more complete analysis of the data for urban areas.

Wang, S. C.↗