Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cluster finding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Is the M81 fast radio burst host globular cluster special?

We use multiband archival Hubble Space Telescope (HST) observations to measure the photometric and structural parameters of the M81 globular cluster (GC) that hosts the fast radio burst FRB 20200120E. Our best-fitting King model has an effective radius rh = 3.06 pc with a moderate King model concentration of c = 53, and an inferred core radius of 0.81 pc. We revisit the exact astrometric location of the FRB within the cluster, and find that FRB 20200120E is located 1.92 pc from the center, but within the projected half-light radius. We estimate the relative encounter rate of the FRB host, along with the corresponding rates of 210 other GCs in M81, and compare these values with the encounter rates of Galactic GCs. The FRB resides in a GC with an encounter rate that is moderately higher than the median stellar encounter rate in our two comparison samples. While the estimated encounter rate of the FRB host cluster (e.g., ∼50% of a cluster like 47 Tuc) is sufficient to allow the possibility that the FRB formed dynamically, our results do not place strong constraints on this scenario due to the limitations of the available HST data and the possible systematic uncertainties and selection effects in the comparison data.

Kristen C. Dage↗
DOE OSTI2025

The hierarchical growth of bright central galaxies and intracluster light as traced by the magnitude gap

Using a sample of 2800 galaxy clusters identified in the Dark Energy Survey across the redshift range 0.20 < z < 0.60, we characterize the hierarchical assembly of bright central galaxies (BCGs) and the surrounding intracluster light (ICL). To quantify hierarchical formation we use the stellar mass–halo mass (SMHM) relation, comparing the halo mass, estimated via the mass–richness relation, to the stellar mass within the BCG + ICL system. Moreover, we incorporate the magnitude gap (M14), the difference in brightness between the BCG (measured within 30 kpc) and fourth brightest cluster member galaxy within 0.5 $R_{200,c}$, as a third parameter in this linear relation. The inclusion of M14, which traces BCG hierarchical growth, increases the slope and decreases the intrinsic scatter, highlighting that it is a latent variable within the BCG + ICL SMHM relation. Moreover, the correlation with M14 decreases at large radii. However, the stellar light within the BCG + ICL transition region (30 –80 kpc) most strongly correlates with halo mass and has a statistically significant correlation with M14. Since the transition region and M14 are independent measurements, the transition region may grow due to the BCG’s hierarchical formation. Additionally, as M14 and ICL result from hierarchical growth, we use a stacked sample and find that clusters with large M14 values are characterized by larger ICL and BCG + ICL fractions, which illustrates that the merger processes that build the BCG stellar mass also grow the ICL. Furthermore, this may suggest that M14 combined with the ICL fraction can identify dynamically relaxed clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Eridanus II: A Fossil from Reionization with an Off-center Star Cluster

In this work, we present deep Hubble Space Telescope (HST) photometry of the ultra-faint dwarf galaxy Eridanus II (Eri II). Eri II, which has an absolute magnitude of M V = -7.1, is located at a distance of 339 kpc, just beyond the virial radius of the Milky Way. We determine the star formation history of Eri II and measure the structure of the galaxy and its star cluster. We find that a star formation history consisting of two bursts, constrained to match the spectroscopic metallicity distribution of the galaxy, accurately describes the Eri II stellar population. The best-fit model implies a rapid truncation of star formation at early times, with >80% of the stellar mass in place before z ~ 6. A small fraction of the stars could be as young as 8 Gyr, but this population is not statistically significant; Monte Carlo simulations recover a component younger than 9 Gyr only 15% of the time, where they represent an average of 7 ± 4% of the population. These results are consistent with theoretical expectations for quenching by reionization. The HST depth and angular resolution enable us to show that Eri II’s cluster is offset from the center of the galaxy by a projected distance of 23 ± 3 pc. This offset could be an indication of a small (~50–75 pc) dark matter core in Eri II. Moreover, we demonstrate that the cluster has a high ellipticity of and is aligned with the orientation of Eri II within 3° ± 6°, likely due to tides. The stellar population of the cluster is indistinguishable from that of Eri II itself.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Constraints on MeV dark matter and primordial black holes: Inverse Compton signals at the SKA

Here we investigate the possibilities for probing MeV dark matter (DM) particles and primordial black holes (PBHs) (for masses ~ 10 15 –10 17 g) at the upcoming radio telescope SKA, using photon signals from the Inverse Compton (IC) effect within a galactic halo. Pair-annihilation or decay of MeV DM particles (into e + e - pairs) or Hawking radiation from a population of PBHs generates mildly relativistic e ± which can lead to radio signals through the IC scattering on low energy cosmic microwave background (CMB) photons. We study the ability of SKA to detect such signals coming from nearby ultra-faint dwarf galaxies Segue I and Ursa Major II as well as the globular cluster ω-cen and the Coma cluster. We find that with ~ 100 hours of observation, the SKA improves the Planck constraints on the DM annihilation/decay rate and the PBH abundance for masses in the range ~ 1 to few tens of MeV and above 10 15 to 10 17 g, respectively. Importantly, the SKA limits are independent of the assumed magnetic fields within the galaxies. Previously allowed regions of diffusion parameters of MeV electrons inside a dwarf galaxy that give rise to observable signals at the SKA are also excluded. For objects like dwarf galaxies, predicted SKA constraints depend on both the DM and diffusion parameters. Independent observations in different frequency bands, e.g., radio and γ-ray frequencies, may break this degeneracy and thus enable one to constrain the combined parameter space of DM and diffusion. However, the constraints are independent of diffusion parameters for galaxy clusters such as Coma.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2012

A New Method to Constrain Supernova Fractions Using X-ray Observations of Clusters of Galaxies

Supernova (SN) explosions enrich the intracluster medium (ICM) both by creating and dispersing metals. We introduce a method to measure the number of SNe and relative contribution of Type Ia supernovae (SNe Ia) and core-collapse supernovae (SNe cc) by directly fitting X-ray spectral observations. The method has been implemented as an XSPEC model called snapec. snapec utilizes a single-temperature thermal plasma code (apec) to model the spectral emission based on metal abundances calculated using the latest SN yields from SN Ia and SN cc explosion models. This approach provides a self-consistent single set of uncertainties on the total number of SN explosions and relative fraction of SN types in the ICM over the cluster lifetime by directly allowing these parameters to be determined by SN yields provided by simulations. We apply our approach to XMM-Newton European Photon Imaging Camera (EPIC), Reflection Grating Spectrometer (RGS), and 200 ks simulated Astro-H observations of a cooling flow cluster, A3112.We find that various sets of SN yields present in the literature produce an acceptable fit to the EPIC and RGS spectra of A3112. We infer that 30.3% plus or minus 5.4% to 37.1% plus or minus 7.1% of the total SN explosions are SNe Ia, and the total number of SN explosions required to create the observed metals is in the range of (1.06 plus or minus 0.34) x 10(exp 9), to (1.28 plus or minus 0.43) x 10(exp 9), fromsnapec fits to RGS spectra. These values may be compared to the enrichment expected based on well-established empirically measured SN rates per star formed. The proportions of SNe Ia and SNe cc inferred to have enriched the ICM in the inner 52 kiloparsecs of A3112 is consistent with these specific rates, if one applies a correction for the metals locked up in stars. At the same time, the inferred level of SN enrichment corresponds to a star-to-gas mass ratio that is several times greater than the 10% estimated globally for clusters in the A3112 mass range.

Observations↗
DOE OSTI2023

Timing of pulsars in the globular cluster omega centauri

We present the timing of the first five millisecond pulsars discovered in the globular cluster Omega Centauri and the discovery of a pulsar with a spin period of 3.68 ms. With a timing baseline of ~3.5 yr we are able to measure the derivative of the spin frequency ($\dot{\nu }$) for the first five pulsars. Upper limits on the pulsar line-of-sight acceleration are estimated and compared with predictions based on analytical models of the cluster. We find that PSRs J1326-4728B and D show large negative accelerations, which are in tension with the minimum acceleration predicted by analytical models. We searched for pulsed γ-ray signals using 14.3 yr of data from the Fermi Large Area Telescope. Although we found no evidence for γ-ray pulsations, PSRs J1326-4728A, B, C, and E are associated with X-ray sources. This suggests that the observed γ-ray emission from Omega Centauri is likely caused by the emission of the ensemble of MSPs. Finally, the linearly polarized emission from PSR J1326-4728A yields a rotation measure of -18 ± 8 rad m -2 .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

FPGA-based tracking for the CMS Level-1 trigger using the tracklet algorithm

The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High-Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient operation under these conditions is the reconstruction of charged particle trajectories and their inclusion in the hardware based trigger system. There are many challenges involved in achieving this: a large input data rate of about 20–40 Tb/s; processing a new batch of input data every 25 ns, each consisting of about 15,000 precise position measurements and rough transverse momentum measurements of particles (“stubs”); performing the pattern recognition on these stubs to find the trajectories; and producing the list of trajectory parameters within 4 µs. Here, this paper describes a proposed solution to this problem, specifically, it presents a novel approach to pattern recognition and charged particle trajectory reconstruction using an all-FPGA solution. The results of an end-to-end demonstrator system, based on Xilinx Virtex-7 FPGAs, that meets timing and performance requirements are presented along with a further improved, optimized version of the algorithm together with its corresponding expected performance.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Introducing a Markov chain-based time calibration procedure for multi-channel particle detectors: application to the SuperFGD and ToF detectors of the T2K experiment

Inter-channel mis-synchronisation can be a limiting factor to the time resolution of high performance timing detectors with multiple readout channels and independent electronics units. In these systems, time calibration methods employed must be able to efficiently correct for minimal mis-synchronisation between channels and achieve the best detector performance. We present an iterative time calibration method based on Markov Chains, suitable for detector systems with multiple readout channels. Starting from correlated hit pairs alone, and without requiring an external reference time measurement, the method solves for fixed per-channel offsets, with precision limited only by the intrinsic single-channel resolution. A mathematical proof that the method is able to find the correct time offsets to be assigned to each detector channel in order to achieve inter-channel synchronisation is given, and it is shown that the number of iterations to reach convergence within the desired precision is controllable with a single parameter. Numerical studies are used to confirm unbiased recovery of true offsets. Finally, the application of the calibration method to the Super Fine-Grained Detector (SuperFGD) and the Time of Flight (TOF) detector at the upgraded T2K near detector (ND280) shows good improvement in overall timing resolution, demonstrating the effectiveness in a real-world scenario and scalability.

calibration and fitting methods↗
DOE OSTI2026

Protonation Dynamics of Confined Ethanol–Water Mixtures in H-ZSM-5 from Machine Learning-Driven Metadynamics

Zeolites are indispensable heterogeneous catalysts in industrial chemical processes, valued for their strong Brønsted acidity, well-defined microporous frameworks, and tunable pore structures. Their catalytic activity arises primarily from Brønsted acid sites (BAS), typically present as bridging hydroxyl groups (Si–OH–Al). Under aqueous reaction conditions, these protons interact dynamically with water and alcohol molecules, leading to complex solvation and protonation behavior within confined pores. In this study, we investigate the protonation equilibrium occurring between ethanol and water at the BAS of acidic zeolites under varying hydration levels, i.e., C2H5OH–(H2O)n, n=1–4. Local structure was analyzed through an adaptive-learning global optimization algorithm, while enhanced sampling molecular dynamics simulations with Well-Tempered Metadynamics (WMetaD) and machine learning interatomic potentials (MLPs) provide free-energy surfaces (FES) at variable hydration levels. The results reveal a strong dependence of proton localization on the degree of hydration. At low hydration (1 water molecule), the proton resides predominantly on ethanol; with 2 water molecules, it shifts toward water, and at higher hydration (3 or more water molecules), it becomes extensively delocalized over the water cluster. These findings underscore the critical role of solvation in modulating acid site behavior and suggest that a minimum of three water molecules is necessary to fully stabilize the proton on water within the zeolite framework. This solvation threshold has significant implications for catalytic processes, particularly in biomass conversion reactions where alcohol protonation is a key step in dehydration mechanisms.

machine learning↗
DOE OSTI2022

Highly Structured Water Networks in Microhydrated Dodecaborate Clusters

Here, we report a combined photoelectron spectroscopy and theoretical investigation of a series of size-selected hydrated closo-dodecaborate clusters B 12 X 12 2– ·nH 2 O (X = H, F, or I; n = 1–6). Distinct structural arrangements of water clusters from monomer to hexamer can be achieved by using different B 12 X 12 2– bases, illustrating the evident solute specificity. Because B–H···H–O dihydrogen bonds are stronger than O···H–O hydrogen bonds in water, the added water molecules are arranged in a unified binding mode by forming highly structured water networks manipulated by B 12 H 12 2– . As a comparison, the hydrated B 12 F 12 2– clusters display similar water evolution for n values of 1 and 2 but different binding modes for larger clusters, while water networks in B 12 I 12 2– share similarities with the free water clusters. This finding provides a consistent picture of the structural diversity of hydrogen bonding networks in microhydrated dodecaborates and a molecular-level understanding of microsolvation dynamics in aqueous borate chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cosmological constraints from the tomography of DES-Y3 galaxies with CMB lensing from ACT DR4

We present a measurement of the cross-correlation between the MagLim galaxies selected from the Dark Energy Survey (DES) first three years of observations (Y3) and cosmic microwave background (CMB) lensing from the Atacama Cosmology Telescope (ACT) Data Release 4 (DR4), reconstructed over ∼ 436 deg 2 of the sky. Our galaxy sample, which covers ∼ 4143 deg 2 , is divided into six redshift bins spanning the redshift range of 0.20 < z <1.05. We adopt a blinding procedure until passing all consistency and systematics tests. After imposing scale cuts for the cross-power spectrum measurement, we reject the null hypothesis of no correlation at 9.1σ. We constrain cosmological parameters from a joint analysis of galaxy and CMB lensing-galaxy power spectra considering a flat ΛCDM model, marginalized over 23 astrophysical and systematic nuisance parameters. We find the clustering amplitude S 8 ≡ σ 8 (Ω m /0.3) 0.5 = 0.75 +0.04 -0.05 . In addition, we constrain the linear growth of cosmic structure as a function of redshift. Our results are consistent with recent DES Y3 analyses and suggest a preference for a lower S 8 compared to results from measurements of CMB anisotropies by the Planck satellite, although at a mild level (< 2σ) of statistical significance.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Identification of heavy, energetic, hadronically decaying particles using machine-learning techniques

Machine-learning (ML) techniques are explored to identify and classify hadronic decays of highly Lorentz-boosted W/Z/Higgs bosons and top quarks. Techniques without ML have also been evaluated and are included for comparison. The identification performances of a variety of algorithms are characterized in simulated events and directly compared with data. The algorithms are validated using proton-proton collision data at $\sqrt{s}$ = 13TeV, corresponding to an integrated luminosity of 35.9 fb -1 . Systematic uncertainties are assessed by comparing the results obtained using simulation and collision data. The new techniques studied in this paper provide significant performance improvements over non-ML techniques, reducing the background rate by up to an order of magnitude at the same signal efficiency.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Design, upgrade and characterization of the silicon photomultiplier front-end for the AMIGA detector at the Pierre Auger Observatory

AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each detector is composed of three scintillation modules, with 10 m 2 detection area per module, buried at 2.3 m depth, resulting in a total detection area of 30 m 2 . Silicon photomultiplier sensors (SiPM) measure the amount of scintillation light generated by charged particles traversing the modules. In this paper, the design of the front-end electronics to process the signals of those SiPMs and test results from the laboratory and from the Pierre Auger Observatory are described. Compared to our previous prototype, the new electronics shows a higher performance, higher efficiency and lower power consumption, and it has a new acquisition system with increased dynamic range that allows measurements closer to the shower core. The new acquisition system is based on the measurement of the total charge signal that the muonic component of the cosmic ray shower generates in the detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

The ATLAS Fast TracKer system

The ATLAS Fast TracKer (FTK) was designed to provide full tracking for the ATLAS high-level trigger by using pattern recognition based on Associative Memory (AM) chips and fitting in high-speed field programmable gate arrays. The tracks found by the FTK are based on inputs from all modules of the pixel and silicon microstrip trackers. The as-built FTK system and components are described, as is the online software used to control them while running in the ATLAS data acquisition system. Also described is the simulation of the FTK hardware and the optimization of the AM pattern banks. An optimization for long-lived particles with large impact parameter values is included. A test of the FTK system with the data playback facility that allowed the FTK to be commissioned during the shutdown between Run 2 and Run 3 of the LHC is reported. The resulting tracks from part of the FTK system covering a limited $\eta$-$\phi$ region of the detector are compared with the output from the FTK simulation. It is shown that FTK performance is in good agreement with the simulation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Electromagnetic shower reconstruction and energy validation with Michel electrons and π 0 samples for the deep-learning-based analyses in MicroBooNE

This article presents the reconstruction of the electromagnetic activity from electrons and photons (showers) used in the MicroBooNE deep learning-based low energy electron search. The reconstruction algorithm uses a combination of traditional and deep learning-based techniques to estimate shower energies. We validate these predictions using two v μ -sourced data samples: charged/neutral current interactions with final state neutral pions and charged current interactions in which the muon stops and decays within the detector producing a Michel electron. Both the neutral pion sample and Michel electron sample demonstrate agreement between data and simulation. Finally, the absolute shower energy scale is shown to be consistent with the relevant physical constant of each sample: the neutral pion mass peak and the Michel energy cutoff.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

A new calibration method for charm jet identification validated with proton-proton collision events at $\sqrt{s}$ =13 TeV

Many measurements at the LHC require efficient identification of heavy-flavour jets, i.e. jets originating from bottom (b) or charm (c) quarks. An overview of the algorithms used to identify c jets is described and a novel method to calibrate them is presented. This new method adjusts the entire distributions of the outputs obtained when the algorithms are applied to jets of different flavours. It is based on an iterative approach exploiting three distinct control regions that are enriched with either b jets, c jets, or light-flavour and gluon jets. Results are presented in the form of correction factors evaluated using proton-proton collision data with an integrated luminosity of 41.5 fb$^{-1}$ at √s = 13 TeV, collected by the CMS experiment in 2017. The closure of the method is tested by applying the measured correction factors on simulated data sets and checking the agreement between the adjusted simulation and collision data. Furthermore, a validation is performed by testing the method on pseudodata, which emulate various mismodelling conditions. The calibrated results enable the use of the full distributions of heavy-flavour identification algorithm outputs, e.g. as inputs to machine-learning models. Thus, they are expected to increase the sensitivity of future physics analyses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Centrality determination in heavy-ion collisions with the LHCb detector

The centrality of heavy-ion collisions is directly related to the created medium in these interactions. A procedure to determine the centrality of collisions with the LHCb detector is implemented for lead-lead collisions at √ s NN = 5 TeV and lead-neon fixed-target collisions at √ s NN = 69 GeV. The energy deposits in the electromagnetic calorimeter are used to determine and define the centrality classes. The correspondence between the number of participants and the centrality for the lead-lead collisions is in good agreement with the correspondence found in other experiments, and the centrality measurements for the lead-neon collisions presented here are performed for the first time in fixed-target collisions at the LHC.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Machine learning on FPGA for event selection

Real-time data processing is a frontier field in experimental particle physics. The application of FPGAs at the trigger level is used by many current and planned experiments (CMS, LHCb, Belle2, PANDA). Usually they use conventional processing algorithms. LHCb has implemented Machine Learning (ML) elements for real-time data processing with a triggered readout system that runs most of the ML algorithms on a computer farm. The work described in this article aims to test the ML-FPGA algorithms for streaming data acquisition. Herein, there are many experiments working in this area and they have a lot in common, but there are many specific solutions for detector and accelerator parameters that are worth exploring further. This report describes the purpose of the work and progress in evaluating the ML-FPGA application.

47 OTHER INSTRUMENTATION↗