Results for “binary signals” — Page 6

DOE OSTI2024

Birefringence tests of gravity with multimessenger binaries

Extensions to General Relativity (GR) allow the polarization of gravitational waves (GW) from astrophysical sources to suffer from amplitude and velocity birefringence, which respectively induce changes in the ellipticity and orientation of the polarization tensor. Here, we introduce a multi-messenger approach to test this polarization behavior of GWs during their cosmological propagation using binary sources, for which the initial polarization is determined by the inclination and orientation angles of the orbital angular momentum vector with respect to the line of sight. In particular, we use spatially resolved radio imaging of the jet from a binary neutron star (BNS) merger to constrain the orientation angle and hence the emitted polarization orientation of the GW signal at the site of the merger, and compare to that observed on Earth by GW detectors. For GW170817, using past measurements of the inclination angle, we constrain the deviation from GR due to amplitude birefringence to κ A = $-0.12^{+0.60}_ {-0.61}$, while the velocity birefringence parameter κ V remains unconstrained. The inability to constrain κ V is due to the low amplitude of GW170817 in the Virgo detector, and measurements of the polarization orientation require information from a combination of multiple detectors with different alignments. For this reason, we also mock future BNS mergers with resolved afterglow proper motion and project that κ V could be constrained to a precision of 5 rad (corresponding to an angular shift of the GW polarization of δ φV ≈ 0.2 rad for a BNS at 100 Mpc) by a future network of third-generation ground-based GW detectors such as Cosmic Explorer and the radio High Sensitivity Array. Crucially, this velocity birefringence effect cannot be constrained with dark binary mergers as it requires polarization information at the emission time, which can be provided only by electromagnetic emission.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Radar - 449MHz - North Bend, OR (OTH) - Reviewed Data

**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.

17 WIND ENERGY↗

DOE OSTI2023

Radar - 449MHz - Forks, WA (FKS) - Reviewed Data

**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.

17 WIND ENERGY↗

DOE OSTI2023

Radar - 449MHz - Astoria, OR (AST) - Reviewed Data

**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.

17 WIND ENERGY↗

DOE OSTI2023

Radar - 449MHz - North Bend, OR (OTH) - Raw Data

**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.

17 WIND ENERGY↗

DOE OSTI2021

Radar - 449MHz - Astoria, OR (AST) - Raw Data

**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.

17 WIND ENERGY↗

DOE OSTI2023

Radar - 449MHz - Forks, WA (FKS) - Raw Data

**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.

17 WIND ENERGY↗

DOE OSTI2025

Black hole-neutron star binaries near neutron star disruption limit in the mass regime of event GW230529

In May 2023, the LIGO-Virgo-KAGRA (LVK) Collaboration reported the likely black hole-neutron star (BHNS) merger GW230529_181500. The signal was observed with high significance in only one detector, limiting constraints on the black hole spin and motivating our study of disruption in this mass regime. That event is expected to be the merger of a 2.5–4.5 M ⊙ primary with a secondary compact object of mass between 1.2–2.0 M ⊙ . This makes it the first BHNS merger with a significant potential for the production of electromagnetic (EM) counterparts, and provides further evidence for compact objects existing within the suspected lower mass gap. To produce post-merger EM transients, the component of the black hole spin aligned with the orbital angular momentum must be sufficiently high, allowing the neutron star to be tidally disrupted. The disrupting BHNS binary may then eject a few percent of a solar mass of matter, leading to an observable kilonova driven by radioactive decays in ejecta, and/or a compact-binary gamma-ray burst (cbGRB) resulting from the formation of an accretion disk and relativistic jet. Determining which mergers lead to disruption of the neutron star is necessary to predict the prevalence of EM signals from BHNS mergers, yet most BHNS simulations so far have been performed far from the minimum spin required for tidal disruption. Here, we use the Spectral Einstein Code to explore the behavior of BHNS mergers in a mass range consistent with GW230529_181500 close to that critical spin, and compare our results against the mass remnant model currently used by the LVK Collaboration to predict the probability of tidal disruption. Furthermore, our numerical results reveal the emergence of non-zero accretion disks even below the predicted NS disruption limit, of low mass but capable of powering cbGRBs. Our results also demonstrate that the remnant mass model underpredicts the disk mass for the DD2 equation of state, while they are within expected modeling errors for SFHo. The disruption limit itself, however, is not found to significantly differ from the predictions of the analytical model, unless remnant masses M rem ≲ 0.001 M ⊙ prove interesting observationally. In all of our simulations, any kilonova signal would be dim and most likely dominated by post-merger disk outflows.

GW230529_181500↗

DOE OSTI2021

Statistical and systematic uncertainties in extracting the source properties of neutron star-black hole binaries with gravitational waves

Gravitational waves emitted by neutron star black hole mergers encode key properties of neutron stars - such as their size, maximum mass and spins - and black holes. However, the presence of matter and the high mass ratio makes generating long and accurate waveforms from these systems hard to do with numerical relativity, and not much is known about systematic uncertainties due to waveform modeling. In this work, we simulate gravitational waves from neutron star black hole mergers by hybridizing numerical relativity waveforms produced with the SpEC code with a recent numerical relativity surrogate NRHybSur3dq8Tidal. These signals are analyzed using a range of available waveform families, and statistical and systematic errors are reported. We find that at a network signal-to-noise ratio (SNR) of 30, statistical uncertainties are usually larger than systematic offsets, while at an SNR of 70 the two become comparable. The individual black hole and neutron star masses, as well as the mass ratios, are typically measured very precisely, though not always accurately at high SNR. At a SNR of 30 the neutron star tidal deformability can only be bound from above, while for louder sources it can be measured and constrained away from zero. All neutron stars in our simulations are non-spinning, but in no case we can constrain the neutron star spin to be smaller than ~0.4 (90% credible interval). Waveform families whose late inspiral has been tuned specifically for neutron star black hole signals typically yield the most accurate characterization of the source parameters. Their measurements are in tension with those obtained using waveform families tuned against binary neutron stars, even for mass ratios that could be relevant for both binary neutron stars and neutron star black holes mergers.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Significant contributions of trimethylamine to sulfuric acid nucleation in polluted environments

Abstract As one of the least understood aerosol processes, nucleation can be a dominant source of atmospheric aerosols. Sulfuric acid (SA)-amine binary nucleation with dimethylamine (DMA) has been recognized as a governing mechanism in the polluted continental boundary layer. Here we demonstrate the importance of trimethylamine (TMA) for nucleation in the complex atmosphere and propose a molecular-level SA-DMA-TMA ternary nucleation mechanism as an improvement upon the conventional binary mechanism. Using the proposed mechanism, we could connect the gaseous amines to the SA-amine cluster signals measured in the atmosphere of urban Beijing. Results show that TMA can accelerate the SA-DMA-based new particle formation in Beijing by 50–100%. Considering the global abundance of TMA and DMA, our findings imply comparable importance of TMA and DMA to nucleation in the polluted continental boundary layer, with probably higher contributions from TMA in polluted rural environments and future urban environments with controlled DMA emissions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Mesogenesis through the ephemeral dark decay of Beauty

Mesogenesis provides a path for generating the baryon asymmetry of the Universe, using only the CP violation furnished by the Standard Model in the decay of B mesons. While this is an intriguing possibility, it is largely constrained by the data on B meson branching fractions into baryons and missing energy carried into the dark sector. We point out that it is possible to make this branching fraction dominant only in the early Universe, through an ultralight scalar coupled to the dark sector and the Standard Model leptons. A scenario is examined where the thermal density of muons in the early Universe temporarily lowers the mass of a dark fermion, allowing for efficient B meson decays. This `dark’ decay channel is shut off later when the muon number density falls, making the scenario compatible with flavor data. Our model can be consistent with the LHC constraints on color-charged heavy bosons required to implement Mesogenesis; such states may be discovered in the future runs as their masses cannot be far above the current bounds. We also outline other possible signals, which can arise in future displaced vertex searches, long range force searches, and observations of neutron star binary mergers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

β Cephei Pulsations in the High-mass Eclipsing System CW Cephei

CW Cep is an early B-type eclipsing binary with mass measurement precisions better than 1%. We report the discovery of pulsation signatures in the Transiting Exoplanet Survey Satellite time-series data of the system observed during Sectors 17 and 18. Our binary modeling indicates that the target star is a partially eclipsing detached system with masses of 12.95 M {sub ⊙} and 11.88 M {sub ⊙} and radii of 5.52 R {sub ⊙} and 5.09 R {sub ⊙} in an eccentric orbit of e = 0.0305. The distance to the eclipsing system, 928 ± 36 pc, is much more precise than the Gaia distance of 962 ± 453 pc. Applying multifrequency analyses to the residual light curve in the outside-eclipse part, we detected 13 significant signals in two frequency regions. Six frequencies below 1 day{sup −1} appeared to be mostly orbital harmonic and combination terms, or sidelobes due to insufficient removal of the binary effects. In contrast, seven frequencies clustered around 2.73 day{sup −1} and 5.34 day{sup −1} could be considered β Cep–type pulsations. Our results represent the second discovery of β Cep pulsations present in double-lined eclipsing binaries with precise masses and, hence, CW Cep serves as an important test bed for the asteroseismic modeling of high-mass stars.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Distant Relatives: The Chemical Homogeneity of Comoving Pairs Identified in Gaia

Comoving pairs, even at the separations of $\mathcal{O}$(10 6 ) are a predicted reservoir of conatal stars. Here we present detailed chemical abundances of 62 stars in 31 comoving pairs with separations of 10 2 –10 7 au and 3D velocity differences <2 km s -1 . This sample includes both bound comoving pairs/wide binaries and unbound comoving pairs. Observations were taken using the Magellan Inamori Kyocera Echelle (MIKE) spectrograph on board the Magellan/Clay Telescope at high resolution (R~ 45,000) with a typical signal-to-noise ratio of 150 pixel -1 . With these spectra, we measure surface abundances for 24 elements, including Li, C, Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Y, Zr, Ba, La, Nd, and Eu. Taking iron as the representative element, our sample of wide binaries is chemically homogeneous at the level of 0.05 dex, which agrees with prior studies on wide binaries. Importantly, even systems at separations 2 × 10 5 –10 7 au are homogeneous to 0.09 dex, as opposed to the random pairs, which have a dispersion of 0.23 dex. Assuming a mixture model of the wide binaries and random pairs, we find that 73 ± 22% of the comoving pairs at separations 2 × 10 5 –10 7 au are conatal. Our results imply that a much larger parameter space of phase space may be used to find conatal stars, to study M-dwarfs, star cluster evolution, exoplanets, chemical tagging, and beyond.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Single-shot Quantum Signal Processing Interferometry

Quantum systems of infinite dimension, such as bosonic oscillators, provide vast resources for quantum sensing. Yet, a general theory on how to manipulate such bosonic modes for sensing beyond parameter estimation is unknown. We present a general algorithmic framework, quantum signal processing interferometry (QSPI), for quantum sensing at the fundamental limits of quantum mechanics by generalizing Ramsey-type interferometry. Our QSPI sensing protocol relies on performing nonlinear polynomial transformations on the oscillator's quadrature operators by generalizing quantum signal processing (QSP) from qubits to hybrid qubit-oscillator systems. We use our QSPI sensing framework to make efficient binary decisions on a displacement channel in the single-shot limit. Theoretical analysis suggests the sensing accuracy, given a single-shot qubit measurement, scales inversely with the sensing time or circuit depth of the algorithm. We further concatenate a series of such binary decisions to perform parameter estimation in a bit-by-bit fashion. Numerical simulations are performed to support these statements. Our QSPI protocol offers a unified framework for quantum sensing using continuous-variable bosonic systems beyond parameter estimation and establishes a promising avenue toward efficient and scalable quantum control and quantum sensing schemes beyond the NISQ era.

Physics↗

DOE OSTI2021

The Challenges Ahead for Multimessenger Analyses of Gravitational Waves and Kilonova: A Case Study on GW190425

In recent years, there have been significant advances in multimessenger astronomy due to the discovery of the first, and so far only confirmed, gravitational wave event with a simultaneous electromagnetic (EM) counterpart, as well as improvements in numerical simulations, gravitational wave (GW) detectors, and transient astronomy. This has led to the exciting possibility of performing joint analyses of the GW and EM data, providing additional constraints on fundamental properties of the binary progenitor and merger remnant. Here, in this work, we present a new Bayesian framework that allows inference of these properties, while taking into account the systematic modeling uncertainties that arise when mapping from GW binary progenitor properties to photometric light curves. We extend the relative binning method presented in Zackay et al. to include extrinsic GW parameters for fast analysis of the GW signal. The focus of our EM framework is on light curves arising from r-process nucleosynthesis in the ejected material during and after merger, the so-called kilonova, and particularly on black hole–neutron star systems. As a case study, we examine the recent detection of GW190425, where the primary object is consistent with being either a black hole or a neutron star. We show quantitatively how improved mapping between binary progenitor and outflow properties, and/or an increase in EM data quantity and quality are required in order to break degeneracies in the fundamental source parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Gravitational waves from more attractive dark binaries

Abstract The detection of gravitational waves (GWs) has led to a deeper understanding of binaries of ordinary astrophysical objects, including neutron stars and black holes. In this work, we point out that binary systems may also exist in a dark sector with astrophysical-mass macroscopic dark matter. These “dark binaries”, when coupled to an additional attractive long-range dark force, may generate a stochastic gravitational wave background (SGWB) with a characteristic spectrum different from ordinary binaries. We find that the SGWB from planet-mass dark binaries is detectable by space- and ground-based GW observatories. The contribution to the SGWB today is smaller from binaries that merge before recombination than after, avoiding constraints on extra radiation degrees of freedom while potentially leaving a detectable GW signal at high frequencies up to tens of GHz.

Astronomy & Astrophysics↗

DOE OSTI2020

Apparent superluminality of lensed gravitational waves

We consider gravitational wave (GW) sources with an associated electromagnetic (EM) counterpart, and analyze the time delay between both signals in the presence of lensing. If GWs have wavelengths comparable to the Schwarzschild radius of astrophysical lenses, they must be treated with wave optics, whereas EM waves are typically well within the approximation of geometric optics. Here, with concrete examples, we confirm that the GW signal never arrives before its EM counterpart, if both are emitted at the same time. However, during the inspiral of a binary, peaks of the GW waveform can arrive before their EM counterpart. We stress this is only an apparent superluminality since the GW waveform is both distorted and further delayed with respect to light. In any case, measuring the multi-messenger time delay and correctly interpreting it has important implications for unveiling the distribution of lenses, testing the nature of gravity, and probing the cosmological expansion history.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Study of the agreement between binary neutron star ejecta models derived from numerical relativity simulations

Neutron star mergers have recently become a tool to study extreme gravity, nucleosynthesis, and the chemical composition of the Universe. To date, there has been one joint gravitational and electromagnetic observation of a binary neutron star merger, GW170817, as well as a solely gravitational observation, GW190425. In order to accurately identify and interpret electromagnetic signals of neutron star mergers, better models of the matter outflows generated by these mergers are required. We compare a series of ejecta models to see where they provide strong constraints on the amount of ejected mass expected from a system, and where systematic uncertainties in current models prevent us from reliably extracting information from observed events. We also examine 2396 neutron star equations of state compatible with GW170817 to see whether a given ejecta mass could be reasonably produced with a neutron star of said equation of state, and whether different ejecta models provide consistent predictions. We find that the difference between models is often comparable to or larger than the error generally assumed for these models, implying better constraints on the models are needed. In conclusion, we also note that the extrapolation of outflow models outside of their calibration window, while commonly needed to analyze gravitational wave events, is extremely unreliable and occasionally leads to completely unphysical results.

79 ASTRONOMY AND ASTROPHYSICS↗