Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bandgap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Extracting Optical Bandgaps from Luminescence Images of Perovskite Solar Cells

We report a camera-based method to capture optical bandgap images of perovskite solar cells (PSCs). It is fast and non-destructive. It can also provide micron-scale spatial resolution. This imaging technique utilizes well-defined and relatively symmetrical band-to-band luminescence spectra emitted from perovskite materials. Their spectra can be fitted with Gaussian functions whose peak locations are similar to absorption thresholds and thus represent the material optical bandgaps. We apply the technique to resolve relative variations in optical bandgaps across various PSCs, and to show optical bandgap inhomogeneity within the same device due to material degradation and impurities. Degradation and impurities were found to both cause optical bandgap shifts inside the materials. Our results are independently confirmed with photoluminescence and absorption spectroscopy.

14 SOLAR ENERGY↗

Low‐Bandgap Mixed Tin‐Lead Perovskites and Their Applications in All‐Perovskite Tandem Solar Cells

Abstract Efficient organic–inorganic metal halide perovskite absorbers have gained tremendous research interest in the past decade due to their super optoelectronic properties and defect tolerance. Lead (Pb) halide perovskites enable highly efficient perovskite solar cells (PSCs) with a record power conversion efficiency (PCE) of over 23%. However, the energy bandgaps of Pb halide perovskites are larger than the optimal bandgap for single junction solar cells, governed by the Shockley–Queisser (SQ) radiative limit. Mixed tin (Sn)‐Pb halide perovskites have drawn significant attention, since their bandgap can be tuned to below 1.2 eV, which opens a door for fabricating all‐perovskite tandem solar cells that can break the SQ radiative limit. This review summarizes the development of low‐bandgap mixed Sn‐Pb PSCs and their applications in all‐perovskite tandem solar cells. Its aim is to facilitate the development of new approaches to achieve high efficiency low‐bandgap single‐junction mixed Sn‐Pb PSCs and all‐perovskite tandem solar cells.

Wang, Changlei↗

Band Tailing and Deep Defect States in CH 3 NH 3 Pb(I 1–x Br x ) 3 Perovskites As Revealed by Sub-Bandgap Photocurrent

Organometal halide perovskite semiconductors have emerged as promising candidates for optoelectronic applications because of the outstanding charge carrier transport properties, achieved with low-temperature synthesis. In this paper, we present highly sensitive sub-bandgap external quantum efficiency (EQE) measurements of Au/spiro-OMeTAD/CH 3 NH 3 Pb(I 1–x Br x ) 3 /TiO 2 /FTO/glass photovoltaic devices. The room-temperature spectra show exponential band tails with a sharp onset characterized by low Urbach energies (E u ) over the full halide composition space. The Urbach energies are 15–23 meV, lower than those for most semiconductors with similar bandgaps (especially with E g > 1.9 eV). Intentional aging of CH 3 NH 3 Pb(I 1–x Br x ) 3 for up to 2300 h, reveals no change in E u , despite the appearance of the PbI 2 phase due to decomposition, and confirms a high degree of crystal ordering. Moreover, sub-bandgap EQE measurements reveal an extended band of sub-bandgap electronic states that can be fit with one or two point defects for pure CH 3 NH 3 PbI 3 or mixed CH 3 NH 3 Pb(I 1–x Br x ) 3 compositions, respectively. Finally, the study provides experimental evidence of defect states close to the midgap that could impact photocarrier recombination and energy conversion efficiency in higher bandgap CH 3 NH 3 Pb(I 1–x Br x ) 3 alloys.

36 MATERIALS SCIENCE↗

Enhanced Open-Circuit Voltage of Wide-Bandgap Perovskite Photovoltaics by Using Alloyed (FA 1– x Cs x )Pb(I 1– x Br x ) 3 Quantum Dots

We report a detailed study on APbX 3 (A=Formamidinium (FA + ), Cs + ; X=I - , Br - ) perovskite quantum dots (PQDs) with combined A- and X-site alloying that exhibit, both, a wide bandgap and high open circuit voltage (V oc ) for the application of a potential top cell in tandem junction photovoltaic (PV) devices. The nanocrystal alloying affords control over the optical bandgap and is readily achieved by solution-phase cation and anion exchange between previously synthesized FAPbI 3 and CsPbBr 3 PQDs. Increasing only the Br - content of the PQDs widens the bandgap but results in shorter carrier lifetimes and associated Voc losses in devices. These deleterious effects can be mitigated by replacing Cs + with FA + , resulting in wide bandgap PQD absorbers with improved charge-carrier mobility and PVs with higher V oc . Although further device optimization is required, these results demonstrate the potential of FA 1– x Cs x )Pb(I 1– x Br x ) 3 PQDs for wide bandgap perovskite PVs with high V oc .

14 SOLAR ENERGY↗

Synthesis of Interface-Driven Tunable Bandgap Metal Oxides

Mixed bandgap and bandgap tunability in semiconductors is critical in expanding their use. Composition altera-tions through single-crystal epitaxial growth and formation of multi-layer tandem structures are often employed to achieve mixed bandgaps albeit with limited tunability. In this study, self-assembled one-dimensional coordination polymers provide a fac-ile synthon and template for graphitic C-doped mesoporous oxides, gC-β-Ga 2 O 3 or gC-In 2 O 3 via controlled oxidative ligand ablation. These materials have mixed bandgaps, and colors, depending on amount of gC present. The carbon-oxide interface leads to induced gap states, hence, a stoichiometrically tunable band structure. Structurally, a multi-scale porous network percolating throughout the material is realized. The nature of heat-treatment and top-down process allows for facile tunabil-ity and formation of mixed bandgap metal oxides through controlled carbon deposition. As a proof of concept, gC-β-Ga 2 O 3 was utilized as a photocatalyst for CO 2 reduction, which demonstrated excellent selectivity and conversion rates into CH 4 and CO.

36 MATERIALS SCIENCE↗

Calculations of theoretical efficiencies for electrochemically-mediated tandem solar water splitting as a function of bandgap energies and redox shuttle potential

Tandem Z-scheme solar water splitting devices composed of two light-absorbers that are connected electrochemically by a soluble redox shuttle constitute a promising technology for cost-effective solar hydrogen production. In this work, efficiency limits of these devices are modeled by combining the detailed-balance model of the light-absorbers with Butler–Volmer electron-transfer kinetics. The impacts of the redox shuttle thermodynamic potential, light-absorber bandgaps, and electrocatalytic parameters on the solar-to-hydrogen conversion (STH) efficiency are modeled. We report that the thermodynamic potential of the redox shuttle with respect to the hydrogen and oxygen evolution potentials has a direct effect on both the STH efficiency and the optimal tandem light-absorber bandgaps needed to achieve the maximum possible STH efficiency. At 1 sun illumination and assuming ideal and optimally selective electrocatalytic parameters, the STH efficiency varies from a minimum of 21%, for a redox shuttle potential of 0 V vs. the reversible hydrogen electrode (RHE), to a maximum of 34%, for a redox shuttle potential of either 0.36 V or 1.06 V vs. RHE. To attain the maximum possible STH efficiency of 34%, the light-absorber bandgaps must be 1.53 eV and 0.75 eV, yet the optimal redox shuttle potential depends on whether the hydrogen-evolving or oxygen-evolving light-absorber has the larger bandgap. Results also underscore the importance of optimizing the absorptance of the top light-absorber, which enables large STH efficiencies to be achieved with a wider range of bandgap combinations. Moreover, given the large overpotentials for the oxygen evolution reaction and reasonably low overpotentials for most redox shuttle reactions, the tandem design is more efficient than a single light-absorber design even when the potential of the redox shuttle exceeds 1.23 V vs. RHE. When the exchange current density of the redox shuttle reactions is as low as 10 -5 mA cm -2 , STH efficiencies as large as 22% are still achievable as long as selective catalysis and optimal redox shuttle potential are assumed, suggesting that even slow redox shuttle reactions may not limit the practicality of these devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First principle analyses of direct bandgap solar cells with absorbing substrates versus mirrors

Direct bandgap InP, GaAs, CdTe, and Ga{sub 0.5}In{sub 0.5}P solar cells containing backside mirrors as well as parasitically absorbing substrates are analyzed for their limiting open circuit voltage and power conversion efficiency with comparison to record solar cells. From the principle of detailed balance, it is shown quantitatively that mirror solar cells have greater voltage and power conversion efficiency than their substrate counterparts. Next, the radiative recombination coefficient and maximum radiative lifetime of GaAs mirror and substrate solar cells are calculated and compared to the nonradiative Auger and Shockley-Read-Hall (SRH) lifetimes. Mirror solar cells have greater radiative lifetime than their substrate variants. Auger lifetime exceeds radiative lifetime for both substrate and mirror cells while SRH lifetime may be less or greater than radiative lifetime depending on trap concentration and capture cross section. Finally, the change in free energy of the photogenerated carriers is analyzed in a comparison between InP, GaAs, CdTe, and Ga{sub 0.5}In{sub 0.5}P mirror and substrate solar cells in order to characterize the relationship between solar photon quality and free energy management in solar cells with differing bandgaps. Wider bandgap visible threshold Ga{sub 0.5}In{sub 0.5}P solar cells make better use of the available change in free energy of the photogenerated charge carriers, even when normalized to the bandgap energy, than narrower bandgap near-IR threshold InP, GaAs, and CdTe solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrically dependent bandgaps in graphene on hexagonal boron nitride

We present first-principles calculations on the bandgap of graphene on a layer of hexagonal boron nitride in three different stacking configurations. Relative stability of the configurations is identified and bandgap tunability is demonstrated through the application of an external, perpendicularly applied electric field. We carefully examine the bandgap's sensitivity to both magnitude of the applied field as well as separation between the graphene and hexagonal boron nitride layers. Features of the band structure are examined and configuration-dependent relationships between the field and bandgap are revealed and elucidated through the atom-projected density of states. These findings suggest the potential for opening and modulating a bandgap in graphene as high as several hundred meV.

36 MATERIALS SCIENCE↗

Bandgap and optical absorption edge of GaAs{sub 1−x}Bi{sub x} alloys with 0 < x < 17.8%

The compositional dependence of the fundamental bandgap of pseudomorphic GaAs{sub 1−x}Bi{sub x} layers on GaAs substrates is studied at room temperature by optical transmission and photoluminescence spectroscopies. All GaAs{sub 1−x}Bi{sub x} films (0 ≤ x ≤ 17.8%) show direct optical bandgaps, which decrease with increasing Bi content, closely following density functional theory predictions. The smallest measured bandgap is 0.52 eV (∼2.4 μm) at 17.8% Bi. Extrapolating a fit to the data, the GaAs{sub 1−x}Bi{sub x} bandgap is predicted to reach 0 eV at 35% Bi. Below the GaAs{sub 1−x}Bi{sub x} bandgap, exponential absorption band tails are observed with Urbach energies 3–6 times larger than that of bulk GaAs. The Urbach parameter increases with Bi content up to 5.5% Bi, and remains constant at higher concentrations. The lattice constant and Bi content of GaAs{sub 1−x}Bi{sub x} layers (0 < x ≤ 19.4%) are studied using high resolution x-ray diffraction and Rutherford backscattering spectroscopy. The relaxed lattice constant of hypothetical zincblende GaBi is estimated to be 6.33 ± 0.05 Å, from extrapolation of the Rutherford backscattering spectrometry and x-ray diffraction data.

36 MATERIALS SCIENCE↗

The impact of sodium on the sub-bandgap states in CZTSe and CZTS

We compare the optically active sub-bandgap states in polycrystalline Cu{sub 2}ZnSnSe{sub 4} (CZTSe) and Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films as a function of sodium content. In all samples studied, we find that CZTSe has a lower concentration of radiative defect-derived states compared to CZTS and that the states are also shallower in CZTSe compared to CZTS. Further, we find that sodium impacts the relative ratios of two sub-bandgap peaks in the 4 K photoluminescence (PL) spectra of CZTSe (one at ∼0.85 eV and another at ∼0.92 eV). We propose that both of these sub-bandgap peaks stem from intrinsic point defects in CZTSe rather than from electronic states introduced by sodium; this is supported by a measurement on a sodium-free single-crystal of CZTSe. We also show that films with stronger emission through the shallower sub-bandgap states at 4 K display room-temperature PL closer to the bandgap energy. For all sodium quantities studied, one broad PL peak is observed in the 4 K PL spectrum of CZTS which also shifts towards the band edge with increasing sodium. A reduced overall defect density and the fact that the states that are present are shallower together may help account for the lower V{sub OC} deficits in CZTSe and the empirical observations that sodium improves device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bandgap analysis and carrier localization in cation-disordered ZnGeN 2

The bandgap of ZnGeN 2 changes with the degree of cation site disorder and is sought in light emitting diodes for emission at green to amber wavelengths. By combining the perspectives of carrier localization and defect states, we analyze the impact of different degrees of disorder on electronic properties in ZnGeN 2 , addressing a gap in current studies, which largely focus on dilute or fully disordered systems. The present study demonstrates changes in the density of states and localization of carriers in ZnGeN 2 calculated using bandgap-corrected density functional theory and hybrid calculations on partially disordered supercells generated using the Monte Carlo method. We use localization and density of states to discuss the ill-defined nature of a bandgap in a disordered material and identify site disorder and its impact on the structure as a mechanism controlling electronic properties and potential device performance. Decreasing the order parameter results in a large reduction of the bandgap. The reduction in bandgap is due, in part, to isolated, localized states that form above the valence band continuum associated with nitrogen coordinated by more zinc than germanium. The prevalence of defect states in all but the perfectly ordered structure creates challenges for incorporating disordered ZnGeN 2 into optical devices, but the localization associated with these defects provides insight into the mechanisms of electron/hole recombination in the material.

36 MATERIALS SCIENCE↗

Charge Compensated (Al, N) Co-Doped Zinc Oxide (ZnO) Films for Photlelectrochemical Application

ZnO thin films with significantly reduced bandgaps were synthesized by doping N and co-doping Al and N at 100oC. All the films were synthesized by radio-frequency magnetron sputtering on F-doped tin-oxide-coated glass. We found that co-doped ZnO:(Al,N) thin films exhibited significantly enhanced crystallinity as compared to ZnO doped solely with N, ZnO:N, at the same growth conditions. Furthermore, annealed ZnO:(Al,N) thin films exhibited enhanced N incorporation over ZnO:N films. As a result, ZnO:(Al,N) films exhibited improved photocurrents than ZnO:N films grown with pure N doping, suggesting that charge-compensated donor-acceptor co-doping could be a potential method for bandgap reduction of wide-bandgap oxide materials to improve their photoelectrochemical performance.

14 SOLAR ENERGY↗

Tailoring Bandgap of Perovskite BaTiO 3 by Transition Metals Co-Doping for Visible-Light Photoelectrical Applications: A First-Principles Study

The physical and chemical properties of V-M" and Nb-M" (M" is 3d or 4d transition metal) co-doped BaTiO 3 were studied by first-principles calculation based on density functional theory. Our calculation results show that V-M" co-doping is more favorable than Nb-M" co-doping in terms of narrowing the bandgap and increasing the visible-light absorption. In pure BaTiO 3 , the bandgap depends on the energy levels of the Ti 3d and O 2p states. The appropriate co-doping can effectively manipulate the bandgap by introducing new energy levels interacting with those of the pure BaTiO 3 . The optimal co-doping effect comes from the V-Cr co-doping system, which not only has smaller impurity formation energy, but also significantly reduces the bandgap. Detailed analysis of the density of states, band structure, and charge-density distribution in the doping systems demonstrates the synergistic effect induced by the V and Cr co-doping. The results can provide not only useful insights into the understanding of the bandgap engineering by element doping, but also beneficial guidance to the experimental study of BaTiO 3 for visible-light photoelectrical applications.

36 MATERIALS SCIENCE↗

Performance Trade-Offs for MBG Using Different Bandgap Pairs

Present GAInP2/GAAs cell grown on Ge (or GaAs) substrates have demonstrates high efficiency, However, the individual bandgaps (1.85 eV, 1.42 eV respectively) are not the optimum match to convert the AM0 spectrum efficiently, although by reducing the thickness of the GaInP2 cell, good efficiencies have been achieved. Within the III-V alloys, modeling shows that several dual junction cells, comprising different bandgap pairs, could give higher efficiency. This paper outlines the modeling used, the bandgap pairs selected, and projections for the AM0 efficiency assuming that the effects of lattice mismatch associated with the bandgap can be reduced. We also present preliminary data on I-V performance for the selected top and bottom cells and for some full cascade cells. We have included some characterization results to check the bandgaps and lattice strain, to check how closely the fabricated cells conform to the model,

Iles, P. A.↗

Photonic Bandgap (PBG) Shielding Technology

Photonic Bandgap (PBG) shielding technology is a new approach to designing electromagnetic shielding materials for mitigating Electromagnetic Interference (EM!) with small, light-weight shielding materials. It focuses on ground planes of printed wiring boards (PWBs), rather than on components. Modem PSG materials also are emerging based on planar materials, in place of earlier, bulkier, 3-dimensional PBG structures. Planar PBG designs especially show great promise in mitigating and suppressing EMI and crosstalk for aerospace designs, such as needed for NASA's Constellation Program, for returning humans to the moon and for use by our first human visitors traveling to and from Mars. Photonic Bandgap (PBG) materials are also known as artificial dielectrics, meta-materials, and photonic crystals. General PBG materials are fundamentally periodic slow-wave structures in I, 2, or 3 dimensions. By adjusting the choice of structure periodicities in terms of size and recurring structure spacings, multiple scatterings of surface waves can be created that act as a forbidden energy gap (i.e., a range of frequencies) over which nominally-conductive metallic conductors cease to be a conductor and become dielectrics. Equivalently, PBG materials can be regarded as giving rise to forbidden energy gaps in metals without chemical doping, analogous to electron bandgap properties that previously gave rise to the modem semiconductor industry 60 years ago. Electromagnetic waves cannot propagate over bandgap regions that are created with PBG materials, that is, over frequencies for which a bandgap is artificially created through introducing periodic defects

Bastin, Gary L.↗

High-Efficiency Solar Cells Using Photonic-Bandgap Materials

Solar photovoltaic cells would be designed to exploit photonic-bandgap (PBG) materials to enhance their energy-conversion efficiencies, according to a proposal. Whereas the energy-conversion efficiencies of currently available solar cells are typically less than 30 percent, it has been estimated that the energy-conversion efficiencies of the proposed cells could be about 50 percent or possibly even greater. The primary source of inefficiency of a currently available solar cell is the mismatch between the narrow wavelength band associated with the semiconductor energy gap (the bandgap) and the broad wavelength band of solar radiation. This mismatch results in loss of power from both (1) long-wavelength photons, defined here as photons that do not have enough energy to excite electron-hole pairs across the bandgap, and (2) short-wavelength photons, defined here as photons that excite electron- hole pairs with energies much above the bandgap. It follows that a large increase in efficiency could be obtained if a large portion of the incident solar energy could be funneled into a narrow wavelength band corresponding to the bandgap. In the proposed approach, such funneling would be effected by use of PBG materials as intermediaries between the Sun and photovoltaic cells.

Dowling, Jonathan↗

Reducing Saturation-Current Density to Realize High-Efficiency Low-Bandgap Mixed Tin-Lead Halide Perovskite Solar Cells

We report the unsatisfactory performance of low-bandgap mixed tin (Sn)-lead (Pb) halide perovskite subcells has been one of the major obstacles hindering the progress of the power conversion efficiencies (PCEs) of all-perovskite tandem solar cells. By analyzing dark-current density and distribution, it is identified that charge recombination at grain boundaries is a key factor limiting the performance of low-bandgap mixed Sn-Pb halide perovskite subcells. It is further found that bromine (Br) incorporation can effectively passivate grain boundaries and lower the dark current density by two-three orders of magnitude. By optimizing the Br concentration, low-bandgap (1.272 eV) mixed Sn-Pb halide perovskite solar cells are fabricated with open-circuit voltage deficits as low as 0.384 V and fill factors as high as 75%. The best-performing device demonstrates a PCE of >19%. In conclusion, the results suggest an important direction for improving the performance of low-bandgap mixed Sn-Pb halide perovskite solar cells.

14 SOLAR ENERGY↗

Growth Phenomena and Bandgap Shift in Melt-Grown β-(In x Ga 1- x ) 2 O 3 Alloys

β-Ga 2 O 3 is an emerging ultra-wide bandgap semiconductor with great promise for power electronics and optoelectronics. Alloys in the In 2 O 3 -Ga 2 O 3 system are interesting for optoelectronic applications, particularly where bandgap tuning is desirable. Herein, β-(In x Ga 1- x ) 2 O 3 alloys with target compositions x = 0.025 or 0.10 are grown from the melt using the Czochralski and vertical gradient freeze techniques. Growth with 10 mol% In yields only small, needle-like crystals, while 2.5 mol% In allows growth of centimeter-sized single crystals. A substantial degree of indium segregation is unveiled by spatial measurements of lattice parameters and the bandgap. The bandgap decreases by a maximum of 0.28 eV in the case of the highest In content crystals. Z-contrast transmission electron microscopy confirms a solely octahedral coordination of In in the β-Ga 2 O 3 lattice. With indium concentrations higher than 2.5 mol%, samples contain micron-scale voids that impart a dark coloration. All measured crystals are electrically conductive, with carrier concentrations varying 10 16 –10 17 cm -3 depending upon the location of the sample in the growth. Lastly, a unique luminescence with unknown origin centered around 2.0 eV is revealed by photoluminescence spectroscopy.

36 MATERIALS SCIENCE↗