Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Degradation mechanisms of materials for large space systems in low Earth orbit

Degradation was explored of various materials used in aerospace vehicles after severe loss of polymeric material coatings (Kapton) was observed on an early shuttle flight in low Earth orbit. Since atomic oxygen is the major component of the atmosphere at 300 km, and the shuttle's orbital velocity produced relative motion corresponding to approx. 5 eV of oxygen energy, it was natural to attribute much of this degradation to oxygen interaction. This assumption was tested using large volume vacuum systems and ion beam sources, in an exploratory effort to produce atomic oxygen of the appropriate energy, and to observe mass loss from various samples as well as optical radiation. Several investigations were initiated and the results of these investigations are presented in four papers. These papers are summarized. They are entitled: (1) The Space Shuttle Glow; (2) Laboratory Degradation of Kapton in a Low Energy Oxygen Ion Beam; (3) The Energy Dependence and Surface Morphology of Kapton Degradation Under Atomic Oxygen Bombardment; and (4) Surface Analysis of STS 8 Samples.

Gordon, William L.↗
NASA NTRS2019

Design of Experiment for the Measurement of Aerosol Droplet Size Distribution of Temperature-Controlled Thermally Atomized Printed Electronic Inks

In-Space Manufacturing (ISM) centers around NASA’s growing need and ability to produce space technologies on demand in space. As the future of long term presence in space and deep space exploration approach, fundamental questions of our dependence on earth resupply to Low Earth Orbit (LEO) remain unanswered. ISM is leading various effort to evaluate the feasibility of producing essential spares and redundant parts on demand to enable a sustainable space-based supply chain model for part resupply. Among the parts and systems being considered, Avionics form the neural network of modern day aircraft and space vehicles providing a wealth of information ranging from Guidance, Navigation, and Control (GN&C) systems to on board Environmental Control and Life Support (ECLS) systems. Recent advances in the use of Aerosol Jet Technology to print Avionics components ranging from electrical traces on a circuit board to complex transistors and sensors raise the possibility of using such technology to reproduce or recreate electronic parts on demand with the help of custom electronics 3D printers. The challenge herein lies within the ability of such printers to generate and deposit an aerosol of electronic material utilizing processes independent of or enhanced by gravity to ensure controllably identical or improved behavior of the aerosol in an International Space Station (ISS) laboratory and on the ground. The behavior as well as the hazards and properties associated with such aerosols in a microgravity environment must be understood well in order to merit a feasible approach to utilizing them for manufacturing in space. In this report, we outline the experimental setup of a modified conventional vaping device to be used as the ideal gravity independent thermal atomization mechanism to generate aerosol. Our objective is to identify the ideal mass, density, and volume of our aerosolized droplets of ink to conclude that there exist a threshold of aerosolized ink droplet sizes that are indeed independent of the effects of gravity and remain stable after atomization. We use a Malvern Spraytec® Spray Particle Size Analyzer to perform real-time laser diffraction measurement of our ink droplets during atomization. The droplet size between conductive ink, dielectric ink and vegetable glycerin have been measured and contrasted. Furthermore, the mechanism of thermal atomization versus traditional pneumatic and ultrasonic atomization for operation in microgravity have been explored.

Wu, Chih-Hao↗
NASA NTRS1979

Friction and wear with a single-crystal abrasive grit of silicon carbide in contact with iron base binary alloys in oil: Effects of alloying element and its content

Sliding friction experiments were conducted with various iron-base binary alloys (alloying elements were Ti, Cr, Mn, Ni, Rh, and W) in contact with a rider of 0.025-millimeter-radius, single-crystal silicon carbide in mineral oil. Results indicate that atomic size and content of alloying element play a dominant role in controlling the abrasive-wear and -friction properties of iron-base binary alloys. The coefficient of friction and groove height (wear volume) general alloy decrease, and the contact pressure increases in solute content. There appears to be very good correlation of the solute to iron atomic radius ratio with the decreasing rate of coefficient of friction, the decreasing rate of groove height (wear volume), and the increasing rate of contact pressure with increasing solute content C. Those rates increase as the solute to iron atomic radius ratio increases from unity.

Miyoshi, K.↗
NASA NTRS1977

Detailed design of a variable volume hydrogen maser

Identification of the hydrogen maser design parameters include the shape of the bulk, q (quality parameter), tuning factors, materials to be used, and operational temperature to offset the wall shift. Expressions for the statistic error on the measured frequency were derived. Localized variations in the concentration of excited atoms were studied and how the shape of the container (the ratio of surface to volume in particular) affects their behavior.

Cervenka, P. O.↗
NASA NTRS1990

Physical conditions in photodissociation regions - Application to galactic nuclei

A procedure is outlined which determines the physical characteristics of the neutral interstellar medium in the nuclei of luminous galaxies. The method uses millimeter and IR observations to find the mass and density of the molecular and atomic gas components as well as the UV flux incident on clouds. The area and volume filling factors and approximate number of clouds and cloud radii are also found. For the Galactic center, about 100 clouds of radius about 0.4 pc and density about 100,000/cu cm are found within about 5 pc. The atomic gas temperature is about 700 K and the FUV field on clouds is about 100,000 times the local Galactic FUV field. The flux is consistent with a central source of luminosity of 2-3 x 10 to the 7th solar. Roughly 100,000 clouds of radius roughly 0.4 pc are found within the roughly 330 pc nuclear region of M82. The large number of clouds produces a projected area filling factor approaching unity. Cloud heating may be dominated by an intense interstellar UV flux.

Wolfire, Mark G.↗
NASA NTRS1993

Development of an Atomization Methodology for Spray Combustion

In liquid rocket propulsion, the knowledge and the understanding of liquid-gas interfacial phenomena are very important. This is important for predicting the onset of cavitation occurring in swirl injection elements used in STME, as well as atomization processes in shear-induced injectors (co-axial) and impinging injector elements. From the fact that all the physical processes including droplet size distribution, droplet dispersion, mixing and combustion are controlled by atomization processes, it is expected that the successful incorporation of the volume of fraction (VOF) will greatly enhance the analytical capability of predicting spray combustion processes in liquid-fueled engines. In this paper, a methodology is developed to define and track interfaces between two fluids in non-orthogonal, body-fitted grids using a single fractional volume of fluid (VOF) variable to describe the distribution of the liquid phase in a gas-liquid flow field. This method was implemented in a mature CFD code MAST (Multiphase All-Speed Transient) utilizing the general PISO-C algorithm. For the preliminary study on the analysis of spray combustion and tracking of the interface between two phases, we will report on the progress of the simulation of the instability on the liquid column; the surface wave instability and the droplet breakup from the liquid surface.

Seung, S. P.↗
NASA NTRS2005

Prediction of Mechanical Properties of Polymers With Various Force Fields

The effect of force field type on the predicted elastic properties of a polyimide is examined using a multiscale modeling technique. Molecular Dynamics simulations are used to predict the atomic structure and elastic properties of the polymer by subjecting a representative volume element of the material to bulk and shear finite deformations. The elastic properties of the polyimide are determined using three force fields: AMBER, OPLS-AA, and MM3. The predicted values of Young s modulus and shear modulus of the polyimide are compared with experimental values. The results indicate that the mechanical properties of the polyimide predicted with the OPLS-AA force field most closely matched those from experiment. The results also indicate that while the complexity of the force field does not have a significant effect on the accuracy of predicted properties, small differences in the force constants and the functional form of individual terms in the force fields determine the accuracy of the force field in predicting the elastic properties of the polyimide.

Odegard, Gregory M.↗
NASA NTRS1994

Atomization simulations using an Eulerian-VOF-Lagrangian method

This paper summarizes the technical development and validation of a multiphase computational fluid dynamics (CFD) numerical method using the volume-of-fluid (VOF) model and a Lagrangian tracking model which can be employed to analyze general multiphase flow problems with free surface mechanism. The gas-liquid interface mass, momentum and energy conservations are modeled by continuum surface mechanisms. A new solution method is developed such that the present VOF model can be applied for all-speed flow regimes. The objectives of the present study are to develop and verify the fractional volume-of-fluid cell partitioning approach into a predictor-corrector algorithm and to demonstrate the effectiveness of the present innovative approach by simulating benchmark problems including the coaxial jet atomization.

Chen, Yen-Sen↗
NASA NTRS2003

Paramagnetic Attraction of Impurity-Helium Solids

Impurity-helium solids are formed when a mixture of impurity and helium gases enters a volume of superfluid helium. Typical choices of impurity gas are hydrogen deuteride, deuterium, nitrogen, neon and argon, or a mixture of these. These solids consist of individual impurity atoms and molecules as well as clusters of impurity atoms and molecules covered with layers of solidified helium. The clusters have an imperfect crystalline structure and diameters ranging up to 90 angstroms, depending somewhat on the choice of impurity. Immediately following formation the clusters aggregate into loosely connected porous solids that are submerged in and completely permeated by the liquid helium. Im-He solids are extremely effective at stabilizing high concentrations of free radicals, which can be introduced by applying a high power RF dis- charge to the impurity gas mixture just before it strikes the super fluid helium. Average concentrations of 10(exp 19) nitrogen atoms/cc and 5 x 10(exp 18) deuterium atoms/cc can be achieved this way. It shows a typical sample formed from a mixture of atomic and molecular hydrogen and deuterium. It shows typical sample formed from atomic and molecular nitrogen. Much of the stability of Im-He solids is attributed to their very large surface area to volume ratio and their permeation by super fluid helium. Heat resulting from a chance meeting and recombination of free radicals is quickly dissipated by the super fluid helium instead of thermally promoting the diffusion of other nearby free radicals.

Bernard, E. P.↗
NASA NTRS1985

Laboratory simulation of meteoritic noble gases. I - Sorption of xenon on carbon: Trapping experiments

The sorption of Xe-127 at 5 x 10 to the -7th atm onto carbon black, pyrolyzed polyvinylidene chloride, and pyrolyzed acridine at 100-1000 C for 5 min-240 h is measured experimentally by gamma spectrometry. The results are presented in tables and graphs and characterized in detail. The tightly bound Xe remaining in the samples after 4000 min pumping at temperatures above 100 C is found to comprise two components: a low-temperature component attributed to physisorption within an atomic-scale labyrinth of micropores, and a high-temperature component due to volume diffusion. The implications for the trapping of noble gases near grain surfaces of amorphous carbon in meteorites are considered.

Wacker, J. F.↗
NASA NTRS1993

Cryogenic spray vaporization in high-velocity helium, argon and nitrogen gasflows

Effects of gas properties on cryogenic liquid-jet atomization in high-velocity helium, nitrogen, and argon gas flows were investigated. Volume median diameter, D(sub v.5e), data were obtained with a scattered-light scanning instrument. By calculating the change in spray drop size, -Delta D(sub v.5)(exp 2), due to droplet vaporization, it was possible to calculate D(sub v.5C). D(sub v.5C) is the unvaporized characteristic drop size formed at the fuel-nozzle orifice. This drop size was normalized with respect to liquid-jet diameter, D(sub O). It was then correlated with several dimensionless groups to give an expression for the volume median diameter of cryogenic LN2 sprays. This expression correlates drop size D(sub v.5c) with aerodynamic and liquid-surface forces so that it can be readily determined in the design of multiphase-flow propellant injectors for rocket combustors.

Ingebo, Robert D.↗
NASA NTRS1986

Protecting spacecraft from atomic oxygen

Findings are reported from Space Shuttle flights STS-3, 4, 5, and 8 regarding the degradation of materials exposed to atomic oxygen in low earth orbit. Atomic oxygen, a strong oxidizing agent, is present in low concentrations at such altitudes, and a spacecraft can sweep up considerable volumes of it at orbital velocities of 5 miles/s, especially if mission lifetimes are measured in years or decades. Material loss has been found to be a function of the fluence (the number of oxygen atoms striking a unit area of surface over a given period); fluence is proportional to atmospheric density, orbital velocity, surface attitude relative to velocity vector, and duration of exposure. Atmospheric density depends first on altitude and second on the phase of the 11-year solar activity cycle. Metals, in the experiments, reacted less than nonmetals. Graphs and a table are included, permitting calculation of how far a surface of various organic materials will recede on a spacecraft in low earth orbit. The limited data base on atomic oxygen interactions with materials, using both Shuttle flight experiments and ground-based facilities must be augmented. Space Station design is imminent, and the understanding of such interactions is critical to the success of that design.

Leger, L. J.↗
NASA NTRS1986

Excitation of O(1D) atoms in aurorae and emission of the forbidden OI 6300-A line

The electron aurora leads to six processes capable of exciting the O(1D2) metastable state of the atomic-oxygen ground-state configuration, the parent state of the 6300-A red line. Altitude profiles of the volume emission rate resulting from each process are computed for Maxwellian electron spectra with characteristic energies between 0.1 and 2.0 keV. Since each process peaks at a different altitude, the sum or total volume emission rate extends over a wide altitude range. Measurements of 6300-A emission obtained by rocket and satellite-borne instruments are summarized, and it is shown that the chemical reaction of N(2D) with O2 is the major source of O(1D) atoms in the electron aurora. New calculations of the 6300-A:4728-A column emission-rate ratio are presented for a range of characteristic energies in an assumed Maxwellian electron spectrum. An approximate equation for the red-line emission per unit energy input is given as a function of electron-spectrum characteristic energy.

Rees, M. H.↗
NASA NTRS1983

Io escape and ionization of atmospheric gases

Exploratory model calculations for the Io atomic oxygen cloud have provided two-dimensional sky-plane intensities for the 6300 A, 1304 A and 880 A lines, where volume excitation and ionization rates are determined by impact collisions with Io plasma torus electrons. Comparison of model results with observations at 6300 A suggests an isotropic oxygen flux from Io of about 1.5x109 atoms 1 sq cm/sec. The effects of including a neutral sulfur cloud and also of including charge exchange reactions between plasma torus ions and neutral OI and SI were evaluated to be significant and were roughly estimated to increase the required oxygen flux to 1.2 x 10 to the 10th atoms/sq cm/sec. In addition, increases in the estimates for the ion loading, cloud mass loss, plasma mass loading and ion energy input rates were also made. Model calculations for an Io sulfur cloud, excluding charge exchange reactions but assuming an SI flux of 7.5 x 10 to the 8th atoms/sq cm/sec (i.e., half of the oxygen flux), were also performed and provided sky plane intensities for a number of visible and IR emission lines.

Smyth, W. H.↗
NASA NTRS1976

The O I /5577-A wavelength/ airglow - Observations and excitation mechanisms

Analysis of the O I /5577-A wavelength/ airglow observations conducted on board the Atmosphere Explorer C satellite yields the following results when combined with simultaneous measurements of ion and neutral composition. A volume emission rate profile derived after sunset requires the production of an O(1S) atom in 8% of the O2(+) recombinations. Photoelectric impact on atomic oxygen and the dissociative recombination of O2(+) are important sources of O(1S) in the dayglow; however, the airglow measurements require a large additional production of O(1S) below 200 km in addition to these. The reaction N + O2(+) yielding NO(+) + O(1S) can provide the missing O(1S) source if the rate coefficient is near 2.5 times 10 to the minus 11th cu cm per sec.

Frederick, J. E.↗
NASA NTRS2004

Development of a Method for Local Electron Temperature and Density Measurements in the Divertor of the JET Tokamak

Plasma volume recombination in the divertor, a process in which charged particles recombine to neutral atoms, contributes to plasma detachment and hence cooling at the divertor target region. Detachment has been observed at JET and other tokamaks and is known to occur at low electron temperatures (T(sub e)<1 eV) and at high electron density (n(sub e)>10(exp 20)/m(exp 3)). The ability to measure such low temperatures is therefore of interest for modelling the divertor. In present work we report development of a new spectroscopic technique for investigation of local electron density (n(sub e)) and temperature (T,) in the outer divertor at JET.

Jupen, C.↗