Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Jump-Down Performance Alterations after Space Flight

INTRODUCTION: Successful jump performance requires functional coordination of visual, vestibular, and somatosensory systems, which are affected by prolonged exposure to microgravity. Astronauts returning from space flight exhibit impaired ability to coordinate effective landing strategies when jumping from a platform to the ground. This study compares jump strategies used by astronauts before and after flight, changes to those strategies within a test session, and recoveries in jump-down performance parameters across several postflight test sessions. These data were obtained as part of an ongoing interdisciplinary study (Functional Task Test, FTT) designed to evaluate both astronaut postflight functional performance and related physiological changes. METHODS: Seven astronauts from short-duration (Shuttle) and three from long-duration (International Space Station) flights performed 3 two-footed jumps from a platform 30 cm high onto a force plate that measured the ground reaction forces and center-of-pressure displacement from the landings. Neuromuscular activation data were collected from the medial gastrocnemius and anterior tibialis of both legs using surface electromyography electrodes. Two load cells in the platform measured the load exerted by each foot during the takeoff phase of the jump. Data were collected in 2 preflight sessions, on landing day (Shuttle only), and 1, 6, and 30 days after flight. RESULTS: Postural settling time was significantly increased on the first postflight test session and many of the astronauts tested were unable to maintain balance on their first jump landing but recovered by the third jump, showing a learning progression in which performance improvements could be attributed to adjustments in takeoff or landing strategy. Jump strategy changes were evident in reduced air time (time between takeoff and landing) and also in increased asymmetry in foot latencies on takeoff. CONCLUSIONS: The test results revealed significant decrements in astronauts abilities to maintain balance and achieve a postural stability upon landing from a jump early after flight. However, the jump landing adaptation process often begins after the first jump with full recovery of most performance parameters within days after space flight. As expected, performance of ISS astronauts on the first day after flight was similar to that of Shuttle crewmembers on landing day.

Reschke, M. F.↗

An Automated Approach to Labelling Datasets in Earth Science Publications

NASA Data Active Archive Centers, orDAACs, ingest, store, and distribute dataacquired from satellites, ground systems as well asreanalysis models. Many authors use this datain their research. However, most of the datasets usedin Earth Science Publications are not citedcorrectly or not cited at all. Thus, there is no directlink between the datasets used and thescientific publications which reference them. Thisleads to issues with reproducibility of theresults, attribution of the research results, anddiscovery of new datasets. This project began byexploring various methods of automatically labellingGoddard Earth Sciences Data andInformation Services Center (GES DISC) datasets usingSupervised Machine Learning and EarthData Search Common Metadata Repository (CMR) queries.The ultimate goal was to create alibrary of citations that utilized automated citationlabeling to directly link the researchpublications to the data they use. Supervised MachineLearning approaches struggled due to thelimited amount of labelled training data to learnfrom. Increasing the volume of training data isdifficult as it requires subject matter experts todevote time to manually reviewing journalarticles and determining the datasets used. The CMRqueries were inconsistent because theunderlying metadata is continuously being updated.Thus, it is hard to generalize theeffectiveness of the CMR results as they are dependenton the internal state of CMR. Theseapproaches helped inform the decision to transitionthe project into using a Knowledge Graph.Another key aspect of this project focused on theautomated extraction of features (platform,instrument, variables, etc) and explicit citationsfrom within Earth Science Publications. Theseautomated extractions were used to classify researchpapers based on their platform/instrumentcouples. This information was input into the CitationManagement System for GES DISC. Theseplatform/instrument couples also provide an additionalfacet that can be searched on the GESDISC website.

Edward Jahoda↗

Future integrated design process

The design process is one of the sources used to produce requirements for a computer system to integrate and manage product design data, program management information, and technical computation and engineering data management activities of the aerospace design process. Design activities were grouped chronologically and explored for activity type, activity interface, data quantity, and data flow. The work was based on analysis of the design process of several typical aerospace products, including both conventional and supersonic airplanes and a hydrofoil design. Activities examined included research, preliminary design, detail design, manufacturing interface, product verification, and product support. The design process was then described in an IPAD environment--the future.

Meyer, D. D.↗

Activate/Inhibit KGCS Gateway via Master Console EIC Pad-B Display

My internship consisted of two major projects for the Launch Control System.The purpose of the first project was to implement the Application Control Language (ACL) to Activate Data Acquisition (ADA) and to Inhibit Data Acquisition (IDA) the Kennedy Ground Control Sub-Systems (KGCS) Gateway, to update existing Pad-B End Item Control (EIC) Display to program the ADA and IDA buttons with new ACL, and to test and release the ACL Display.The second project consisted of unit testing all of the Application Services Framework (ASF) by March 21st. The XmlFileReader was unit tested and reached 100 coverage. The XmlFileReader class is used to grab information from XML files and use them to initialize elements in the other framework elements by using the Xerces C++ XML Parser; which is open source commercial off the shelf software. The ScriptThread was also tested. ScriptThread manages the creation and activation of script threads. A large amount of the time was used in initializing the environment and learning how to set up unit tests and getting familiar with the specific segments of the project that were assigned to us.

Computer Programming↗

Enhancing Dataset Discovery and Usage Tracking in Earth Sciences: Integrating Knowledge Graphs and Large Language Models

NASA's Data Active Archive Centers (DAACs) have played a crucial role in supporting a wide range of applied research in Earth and Environmental sciences. To date, over 20,000 publications have been collected, citing more than 3,000 NASA Earth science datasets. We present an innovative approach that links datasets and collected publications through a knowledge graph (KG). This KG enables the tracking of dataset citations throughout the dataset's lifecycle, revealing patterns of dataset usage across various applied research areas. We fine-tuned the pre-trained NASA IMPACT INDUS-Base Retriever Large Language Model (LLM) using a set of labeled publication abstracts. Our results indicate that 87% of the publications were classified into one of twenty applied research areas, while the remaining 13% were categorized into non-applied research areas. The classified publications linked to datasets are used to discover datasets by users interested in specific applied research and by dataset providers to determine dataset usage for applications.

open-source↗

Optically activated magnetic recording tape

Optically activated data storage medium visually and electromagnetically reproduces a recorded signal. In an electric field, particles in heat-fluidized thermoplastic layer form a visible image of the recorded signal. Refluidizing the thermoplastic layer erases the signals. Very high data packing densities are achieved.

Marks, A. M.↗

Trace element studies of rocks and soils from Oceanus Procellarum and Mare Tranquillitatis

Neutron activation data on Zn, Ga, Ge, Cd, In and Ir are reported for six rocks and two soils from the Apollo 12 mission. Comparison of these and similar data for Apollo 11 samples indicates extralunar components in the 12070 and 10084 soils of about 1.0 and 1.1% expressed in terms of an assumed composition which is the same as the water-free portion of C1 chondrites. A relationship between the integrated flux of extralunar material and the increase in concentration of such material in the fines of the lunar regolith is derived. Apollo 12 rocks have concentrations of Zn, Ge, Cd, In and possibly Ir which are lower by factors of 60 or more, relative to terrestrial basalts. A mechanism is proposed for the late accretion of volatile-rich materials, including comets, in which a primitive terrestrial atmosphere is invoked to explain the significantly higher concentrations of such substances on the earth.

Baedecker, P. A.↗

Free energies of formation of WC and WzC and the thermodynamic properties of carbon in solid tungsten

The activity of carbon in the two-phase regions - W + WC and W + W2C was obtained from the carbon content of iron rods equilibrated with mixtures of metal plus carbide powders. From this activity data the standard free energies of formation of WC and W2C were calculated. The temperature of the invariant reaction W2C = W + WC was fixed at 1570 + or - 5K. Using available solubility data for C in solid W, the partial molar free energy of C in the dilute solid solution was also calculated. The heat of solution of C in W, and the excess entropy for the interstitial solid solution, were computed, assuming that the carbon atoms reside in the octahedral interstices of bcc W.

Gupta, D. K.↗

Infrared sky noise survey

A 10 micron infrared sky noise survey, which was conducted during the period from June 1, 1970 to June 30, 1974, is reported along with associated electronics and recording equipment which was developed and deployed for periods up to 18 months at various potential or existing infrared observing sites in the U.S., Mexico, and Chile. The results of the data activity are given, and variables are defined which influence the intensity and duration of the sky noise.

Westphal, J. A.↗

On-board data management study for EOPAP

The requirements, implementation techniques, and mission analysis associated with on-board data management for EOPAP were studied. SEASAT-A was used as a baseline, and the storage requirements, data rates, and information extraction requirements were investigated for each of the following proposed SEASAT sensors: a short pulse 13.9 GHz radar, a long pulse 13.9 GHz radar, a synthetic aperture radar, a multispectral passive microwave radiometer facility, and an infrared/visible very high resolution radiometer (VHRR). Rate distortion theory was applied to determine theoretical minimum data rates and compared with the rates required by practical techniques. It was concluded that practical techniques can be used which approach the theoretically optimum based upon an empirically determined source random process model. The results of the preceding investigations were used to recommend an on-board data management system for (1) data compression through information extraction, optimal noiseless coding, source coding with distortion, data buffering, and data selection under command or as a function of data activity, (2) for command handling, (3) for spacecraft operation and control, and (4) for experiment operation and monitoring.

Davisson, L. D.↗

Plagioclase-melt equilibria

Results of experiments investigating the crystallization of plagioclase from natural and synthetic melts are presented and are analyzed in terms of empirical and semiquantitative mixing models for the melt. Elemental partition constants were determined from the results and from other published data. Activities of the melt components were modeled by assuming that the melt consists of two independent quasi-lattices of network-forming and network-modifying components, each of which is an ideal solution of its respective component. The semiquantitative analysis supports the suggestion that Na(+) is strongly associated with tetrahedrally-coordinated Al in the melt. It is shown that it is possible to predict the composition of plagioclase crystallizing under equilibrium conditions from a dry melt of known composition and known temperature at low total pressure.

Drake, M. J.↗

Mesosiderites and howardites - Igneous formation and possible genetic relationships

Neutron activation data are presented for major, minor, and trace elements in whole rock howardites and silicates from mesosiderites. Compositions of howardites and mesosiderites are similar and intermediate between those of eucrites and diogenites. It is indicated that mesosiderites have a higher normative silica component than howardites. It appears that this results partly from a higher content of a highly evolved igneous component and partly from in situ reduction of FeO to Fe followed by magnetic separation of metal prior to analysis. It is shown that light rare earth elements are enriched in some mesosiderites.

Mittlefehldt, D. W.↗

Free energy of formation of Mo2C and the thermodynamic properties of carbon in solid molybdenum

As part of a study of the thermodynamical properties of interstitial elements in refractory metals, the free energy of formation of Mo2C is determined, and the thermodynamical properties of C in solution in solid Mo evaluated. The activity of C in the two-phase region Mo + Mo2C is obtained from the C content of iron rods equilibrated with metal + carbide powder mixtures. The free energy of formation of alpha-Mo2C is determined from the activity data. The thermodynamic properties of C in the terminal solid solution are calculated from available data on the solid solubility of C in Mo. Lattice distortion due to misfit of the C atoms in the interstitial sites appears to play a significant role in determining the thermodynamic properties of C in solid Mo.

Seigle, L. L.↗

Motion-base simulator results of advanced supersonic transport handling qualities with active controls

Handling qualities of the unaugmented advanced supersonic transport (AST) are deficient in the low-speed, landing approach regime. Consequently, improvement in handling with active control augmentation systems has been achieved using implicit model-following techniques. Extensive fixed-based simulator evaluations were used to validate these systems prior to tests with full motion and visual capabilities on a six-axis motion-base simulator (MBS). These tests compared the handling qualities of the unaugmented AST with several augmented configurations to ascertain the effectiveness of these systems. Cooper-Harper ratings, tracking errors, and control activity data from the MBS tests have been analyzed statistically. The results show the fully augmented AST handling qualities have been improved to an acceptable level.

Feather, J. B.↗

Space Operations Center System Analysis: Requirements for a Space Operations Center, revision A

The system and program requirements for a space operations center as defined by systems analysis studies are presented as a guide for future study and systems definition. Topics covered include general requirements for safety, maintainability, and reliability, service and habitat modules, the health maintenance facility; logistics modules; the docking tunnel; and subsystem requirements (structures, electrical power, environmental control/life support; extravehicular activity; data management; communications and tracking; docking/berthing; flight control/propulsion; and crew support). Facilities for flight support, construction, satellite and mission servicing, and fluid storage are included as well as general purpose support equipment.

Woodcock, G. R.↗