Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WRF simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Analysis of the Planetary Boundary Layer Height During DISCOVER-AQ Baltimore–Washington, D.C., with Lidar and High-Resolution WRF Modeling

The daytime planetary boundary layer (PBL) was examined for the Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) Baltimore (Maryland)–Washington, D.C., campaign of July 2011 using PBL height (PBLH) retrievals from aerosol backscatter measurements from ground-based micropulse lidar (MPL), the NASA Langley Research Center airborne High Spectral Resolution Lidar-1 (HSRL-1), and the Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) on the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. High-resolution Weather Research and Forecasting (WRF) Model simulations with horizontal grid spacing of 1 km and different combinations of PBL schemes, urban parameterization, and sea surface temperature inputs were evaluated against PBLHs derived from lidars, ozonesondes, and radiosondes. MPL and WRF PBLHs depicted a growing PBL in the morning that reached a peak height by midafternoon. WRF PBLHs calculated from gridded output profiles generally showed more rapid growth and higher peak heights than did the MPLs, and all WRF–lidar differences were dependent on model configuration, PBLH calculation method, and synoptic conditions. At inland locations, WRF simulated an earlier descent of the PBL top in the afternoon relative to the MPL retrievals and radiosonde PBLHs. At Edgewood, Maryland, the influence of the Chesapeake Bay breeze on the PBLH was captured by both the ozonesonde and WRF data but generally not by the MPL PBLH retrievals because of generally weaker gradients in the aerosol backscatter profile and limited normalized relative backscatter data near the top height of the marine layer.

Hegarty, Jennifer D.↗
DOE OSTI2025

Numerical case study of the aerosol–cloud interactions in warm boundary layer clouds over the eastern North Atlantic with an interactive chemistry module

The presence of warm boundary layer stratiform clouds over the eastern North Atlantic (ENA) region is commonly influenced by the Azores High, especially during the summer season. To investigate comprehensive aerosol–cloud interactions, this study employs the Weather Research and Forecasting model coupled with a chemistry component (WRF-Chem), incorporating aerosol chemical components that are relevant to the formation of cloud condensation nuclei (CCN) and accounting for aerosol spatiotemporal variation. This study focuses on aerosol indirect effects, particularly the long-range transport of aerosols, in the ENA region under three different weather regimes: a ridge with a surface high-pressure system, a post-trough with a surface high-pressure system, and a weak trough. The WRF-Chem simulations conducted at a near-large-eddy scale offer valuable insights into the model's performance, especially in terms of its ability to use high spatial resolution to capture mesoscale cloud features across various weather regimes. Our result shows that introducing 5 times more aerosols to either non-precipitating or precipitating clouds significantly increases ambient CCN numbers, resulting in, to varying degrees, higher liquid water path (LWP) values. The substantial aerosol–cloud interaction especially occurs in the precipitating clouds and demonstrates the susceptibility of the LWP to changes in CCN under different regimes. Conversely, thin, non-rain clouds at the edges of a cloud system are prone to evaporation, exhibiting an aerosol drying effect. The aerosols released during this process transition back to the accumulation mode, facilitating future activation. This dynamic behavior is not adequately represented in prescribed-aerosol simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

WRF restart files for a LASSO-CACTI simulation

The restart files from a Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m through the use of four nested domains, labeled d1 through d4. Restarts are available for the LES domains, i.e., d3 and d4. The simulations are of convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. The restart files are output every 30 minutes in netCDF format as output by the WRF model, i.e., the “wrfrst” files, with the files renamed for archival purposes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

wrfhydro

This dataset contains a continuous WRF-Hydro simulation for the CACTI field campaign. The simulated period is 1-Aug-2018 through 21-Mar-2019 with hourly model output. The simulation is made with two grids that match the two outer LASSO-CACTI grids, with 7.5 km and 2.5 km grid spacings. Forcing data for WRF-Hydro was obtained from the ERA5-Land product. Values from this WRF-Hydro simulation were used to initialize the soil state for each LASSO-CACTI simulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Input files and WRF run directory for a LASSO-CACTI simulation

Tar file containing files necessary for reproducing a given Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m for convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. Types of files in this tar include the initial and boundary conditions, WRF namelist, and other files present in a WRF run directory.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Raw WRF model output files from a LASSO-CACTI simulation

The raw model output from a Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m through the use of four nested domains, labeled d1 through d4. The simulations are of convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. The raw model output is in netCDF format as output by the WRF model, i.e., the “wrfout” files, with the files renamed for archival purposes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Multi-Analysis Approach for Estimating Regional Health Impacts from the 2017 Northern California Wildfires

In the evening of October 8 and early hours of October 9, 2017, high winds in Northern California downed trees and power lines, igniting some of the most devastating wildfires the state had seen, and within hours unhealthy air quality impacted millions of people. We simulated these air quality conditions using fire detection information from the MODIS, VIIRS, and GOES-16 ABI satellite instruments, and applying a set of three WRF–CMAQ simulations, one data fusion, and three machine learning methods. We investigated using the 5-min available GOES-16 fire detection data to simulate timing of fire activity to allocate emissions hourly for the WRF-CMAQ air quality modeling system. Interestingly, this approach did not necessarily improve results compared to the baseline case, which used a default time profile. However, this approach was key to simulating the initial 12-hr explosive fire activity and smoke impacts. The WRF-CMAQ simulations compared well with observational data for the October 8-15 time period and tended to overestimate concentrations October 16-20. To improve these results, we applied three machine learning algorithms. We also had a unique opportunity to evaluate results with temporary monitors deployed specifically for wildfires, and performance was markedly different. For example, at the permanent monitoring locations, the WRF-CMAQ simulations had a Pearson correlation of 0.65, and the data fusion approach improved this (Pearson correlation = 0.95), while at the temporary monitor locations across the WRF-CMAQ, data fusion, and machine learning datasets, the best Pearson correlation was 0.5. The data fusion and machine learning results were biased low and WRF-CMAQ results were biased high. Finally, we applied the optimized PM2.5 exposure estimate in a short-term exposure-response function. Total estimated mortality attributable to PM2.5 exposure during the smoke episode was 83 (95% confidence interval: 0, 196) with 47% of these deaths attributable to wildland fire smoke.

O'Neill, Susan↗
DOE OSTI2025

Performance of Convection-Permitting and Convection-Parameterized Models in Reproducing the Extreme Precipitation Intensity Relationship with Surface Conditions

Here, this study investigates the warm-season extreme precipitation–temperature scaling relationship in CONUS404, a convection-permitting (4 km) Weather Research and Forecasting (WRF) Model simulation over the conterminous United States for the past four decades, and compares it with the WRF-Thermodynamic Global Warming (WRF-TGW) historical simulation at a coarser resolution (12 km) using parameterized convection. We also analyze the NCEP stage IV and NASA Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (IMERG) datasets as observational benchmarks. We examine how extreme precipitation intensity (EPI) varies with temperature and saturation deficit over representative regions based on hourly data. The stage IV and IMERG data show a similar pattern of EPI variation with temperature and saturation deficit, except that the EPI peak is lower in IMERG than in stage IV. Under dry and hot conditions, EPI decreases too rapidly with elevated saturation deficit in both CONUS404 and WRF-TGW compared to observations, but the performance of CONUS404 is superior to WRF-TGW. When the near-surface atmosphere is saturated or close to saturated, both CONUS404 and WRF-TGW produce higher peak values of EPI relative to the observational references; IMERG exhibits scaling rates close to the Clausius–Clapeyron (C–C) relationship, while CONUS404, WRF-TGW, and stage IV all demonstrate super-C–C scaling behaviors. Despite marked warming over the past four decades, in both CONUS404 and WRF-TGW, the scaling relationship between EPI and temperature in a saturated atmosphere remains stable and robust. This indicates a strong potential for the EPI–temperature scaling rate under saturation to be used as an emergent constraint in reducing uncertainties of future extreme precipitation projection.

Atmosphere↗
DOE OSTI2023

Assessment of WRF (v 4.2.1) dynamically downscaled precipitation on subdaily and daily timescales over CONUS

Abstract. This study analyzes the quality of simulated historical precipitation across the contiguous United States (CONUS) in a 12 km Weather Research and Forecasting model version 4.2.1 (WRF v 4.2.1)-based dynamical downscaling of the fifth-generation ECMWF atmospheric reanalysis (ERA5). This work addresses the following questions. First, how well are the 3 and 24 h precipitation characteristics (diurnal and annual cycles, precipitation frequency, annual and seasonal mean and maximum precipitation, and distribution of seasonal maximum precipitation) represented in the downscaled simulation, compared to ERA5? And second, how does the performance of the simulated WRF precipitation vary across seasons, regions, and timescales? Performance is measured against the National Centers for Environmental Prediction/Environmental Modeling Center (NCEP/EMC) 4 km Stage IV and Oregon State University Parameter-Elevation Regressions on Independent Slopes Model (PRISM) data on 3 and 24 h timescales, respectively. Our analysis suggests that the 12 km WRF exhibits biases typically found in other WRF simulations, including those at convection-permitting scales. In particular, WRF simulates both the timing and magnitude of the summer diurnal precipitation peak as well as ERA5 over most of the CONUS, except for a delayed diurnal peak over the Great Plains. As compared to ERA5, both the month and the magnitude of the precipitation peak annual cycle are remarkably improved in the downscaled WRF simulation. WRF slightly overestimates 3 and 24 h precipitation maximum over the CONUS, in contrast to ERA5, which generally underestimates these quantities mainly over the eastern half of the CONUS. Notably, WRF better captures the probability density distribution (PDF) of 3 and 24 h annual and seasonal maximum precipitation. WRF exhibits seasonally dependent precipitation biases across the CONUS, while ERA5's biases are relatively consistent year round over most of the CONUS. These results suggest that dynamical downscaling to a higher resolution improves upon some precipitation metrics but is susceptible to common regional climate model biases. Consequently, if used as input data for domain-specific models, we suggest moderate bias correction be applied to the dynamically downscaled product.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Exploring ENSO-Induced Anomalies over North America in Historical and Future Climate Simulations That Use HadGEM2-ESM Output to Drive WRF

Projected changes to the El Niño Southern Oscillation (ENSO) climate mode have been explored using global Earth system models (ESMs). Regional expressions of such changes have yet to be fully advanced and may require the use of regional downscaling. Here, we employ regional climate modeling (RCM) using the Weather Research and Forecasting (WRF) model at convection-permitting resolution and nested in output from the HadGEM2 ESM. We quantify ENSO teleconnections to temperature and precipitation anomalies in historical and future climate scenarios over eastern North America. Two paired simulations are run, a strong El Niño (positive ENSO phase) and a weak La Niña (negative ENSO phase), for the historical and future years. The HadGEM2 direct output and HadGEM2-WRF simulation output are compared to the anomalies derived from the NOAA ENSO Climate Normals dataset. The near-surface temperature and precipitation differences by ENSO phase, as represented by the HadGEM2-WRF historical simulations, show a poor degree of association with the NOAA ENSO Climate Normals, in part because of the large biases in the HadGEM2 model. Downscaling with the WRF model does improve the agreement with the observations, and large discrepancies remain. The model chain HadGEM2-WRF reverses the sign of the ENSO phase response over eastern North America under simulations of the future climate with high greenhouse gas forcing, but due to the poor agreement with the NOAA ENSO Climate Normals it is difficult to assign confidence to this prediction.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2014

Introducing Multisensor Satellite Radiance-Based Evaluation for Regional Earth System Modeling

Earth System modeling has become more complex, and its evaluation using satellite data has also become more difficult due to model and data diversity. Therefore, the fundamental methodology of using satellite direct measurements with instrumental simulators should be addressed especially for modeling community members lacking a solid background of radiative transfer and scattering theory. This manuscript introduces principles of multisatellite, multisensor radiance-based evaluation methods for a fully coupled regional Earth System model: NASA-Unified Weather Research and Forecasting (NU-WRF) model. We use a NU-WRF case study simulation over West Africa as an example of evaluating aerosol-cloud-precipitation-land processes with various satellite observations. NU-WRF-simulated geophysical parameters are converted to the satellite-observable raw radiance and backscatter under nearly consistent physics assumptions via the multisensor satellite simulator, the Goddard Satellite Data Simulator Unit. We present varied examples of simple yet robust methods that characterize forecast errors and model physics biases through the spatial and statistical interpretation of various satellite raw signals: infrared brightness temperature (Tb) for surface skin temperature and cloud top temperature, microwave Tb for precipitation ice and surface flooding, and radar and lidar backscatter for aerosol-cloud profiling simultaneously. Because raw satellite signals integrate many sources of geophysical information, we demonstrate user-defined thresholds and a simple statistical process to facilitate evaluations, including the infrared-microwave-based cloud types and lidar/radar-based profile classifications.

Planetary Boundary Layer↗
DOE OSTI2024

Effects of Pollen on Hydrometeors and Precipitation in a Convective System

Anemophilous (wind-driven) pollen is one type of primary biological aerosol particle, which can rupture under high humidity conditions and form smaller sub-pollen particles (SPPs). Both pollen and SPPs can reach the upper troposphere under convective conditions, acting as cloud condensation nuclei (CCN) and ice nucleating particles (INPs), thus influencing cloud formation and precipitation. However, the impacts of these biological aerosols on cold cloud formation and local climate remain unclear as there are large uncertainties on their emission flux and ice nucleating abilities. Here, we incorporate pollen emission and rupture processes in the Weather Research and Forecasting Model with Chemistry (WRF-Chem) simulations and update the Morrison microphysics scheme within WRF-Chem using aerosol-aware INP parameterizations to account for pollen in addition to other anthropogenic and biogenic aerosol. INP parameterizations for pollen and SPP are derived from laboratory experiments. When including pollen rupture rates as observed in a series of chamber studies, SPP concentrations increase, leading to an increase of cloud ice and water by up to 50% and potentially extending the duration of the convective system. Among all simulated hydrometeors, graupel and raindrops exhibit the largest enhancements from the inclusion of SPPs, with intensifying precipitation at the backside of the convective system and a greater spatial extent. Sensitivity simulations indicate that SPPs have a greater effect on cloud microphysical processes than whole pollen grains, and further observational evidence is needed to constrain these processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Impact of Urban Representation on Simulation of Hurricane Rainfall

Abstract Taking the examples of Hurricane Florence (2018) over the Carolinas and Hurricane Harvey (2017) over the Texas Gulf Coast, the study attempts to understand the performance of slab, single‐layer Urban Canopy Model (UCM), and Building Environment Parameterization (BEP) in simulating hurricane rainfall using the Weather Research and Forecasting (WRF) model. The WRF model simulations showed that for an intense, large‐scale event such as a hurricane, the model quantitative precipitation forecast over the urban domain was sensitive to the model urban physics. The spatial and temporal verification using the modified Kling‐Gupta efficiency and Method for Object based Diagnostic and Evaluation in Time Domain suggests that UCM performance is superior to the BEP scheme. Additionally, using the BEP urban physics scheme over UCM for landfalling hurricane rainfall simulations has helped simulate heavy rainfall hotspots.

Geology↗
DOE OSTI2023

Analysis of Fire-Induced Circulations during the FireFlux2 Experiment

Despite recent advances in both coupled fire modeling and measurement techniques to sample the fire environment, the fire–atmosphere coupling mechanisms that lead to fast propagating wildfires remain poorly understood. This knowledge gap adversely affects fire management when wildland fires propagate unexpectedly rapidly and shift direction due to the fire impacts on local wind conditions. In this work, we utilized observational data from the FireFlux2 prescribed burn and numerical simulations performed with a coupled fire–atmosphere model WRF-SFIRE to assess the small-scale impacts of fire on local micrometeorology under moderate wind conditions (10–12 m/s). The FireFlux2 prescribed burn provided a comprehensive observational dataset with in situ meteorological observations as well as IR measurements of fire progression. To directly quantify the effects of fire–atmosphere interactions, two WRF-SFIRE simulations were executed. One simulation was run in a two-way coupled mode in which the heat and moisture fluxes emitted from the fire were injected into the atmosphere, and the other simulation was performed in a one-way coupled mode for which the atmosphere was not affected by the fire. The difference between these two simulations was used to analyze and quantify the fire impacts on the atmospheric circulation at different sections of the fire front. The fire-released heat fluxes resulted in vertical velocities as high as 10.8 m/s at the highest measurement level (20 m above ground level) gradually diminishing with height and dropping to 7.9 m/s at 5.77 m. The fire-induced horizontal winds indicated the strongest fire-induced flow at the lowest measurement levels (as high as 3.3 m/s) gradually decreasing to less than 1 m/s at 20 m above ground level. The analysis of the simulated flow indicates significant differences between the fire-induced circulation at the fire head and on the flanks. The fire-induced circulation was much stronger near the fire head than at the flanks, where the fire did not produce particularly strong cross-fire flow and did not significantly change the lateral fire progression. However, at the head of the fire the fire-induced winds blowing across the front were the strongest and significantly accelerated fire progression. The two-way coupled simulation including the fire-induced winds produced 36.2% faster fire propagation than the one-way coupled run, and more realistically represented the fire progression.

Benik, Jeremy T.↗