Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVE REFLECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Reflection of electromagnetic waves at a biaxial-isotropic interface

The reflection of electromagnetic waves at a plane boundary between isotropic and biaxial media has been investigated using the kDB approach. The general case has been considered in which the principal dielectric axes of the biaxial medium are oriented at an arbitrary angle to the normal of the plane boundary. In general, two characteristic waves propagate in the biaxial medium, leading to coupling of vertical and horizontal polarizations in the reflected waves. Some special cases are illustrated. The results have applications to problems in remote sensing and integrated optics.

Njoku, E. G.↗
NASA NTRS1974

Mach disk from underexpanded axisymmetric nozzle flow

The flowfield associated with the underexpanded axisymmetric nozzle freejet flow including the appearance of a Mach disk has been studied. It is shown that the location and size of the Mach disk are governed by the appearance of a triple-point shock configuration and the condition that the central core flow will reach a state of 'choking at a throat'. It is recognized that coalescence of waves requires special attention and the reflected wave, as well as the vorticity generated from these wave interactions, have to be taken accurately into account. The theoretical results obtained agreed well with the experimental data.

Chang, I.-S.↗
NASA NTRS2004

BASS Code Development

The BASS computational aeroacoustic code solves the fully nonlinear Euler equations in the time domain in two-dimensions. The acoustic response of the stator is determined simultaneously for the first three harmonics of the convected vortical gust of the rotor. The spatial mode generation, propagation and decay characteristics are predicted by assuming the acoustic field away from the stator can be represented as a uniform flow with small harmonic perturbations superimposed. The computed field is then decomposed using a joint temporal-spatial transform to determine the wave amplitudes as a function of rotor harmonic and spatial mode order. This report details the following technical aspects of the computations and analysis. 1) the BASS computational technique; 2) the application of periodic time shifted boundary conditions; 3) the linear theory aspects unique to rotor-stator interactions; and 4) the joint spatial-temporal transform. The computational results presented herein are twofold. In each case, the acoustic response of the stator is determined simultaneously for the first three harmonics of the convected vortical gust of the rotor. The fan under consideration here like modern fans is cut-off at +, and propagating acoustic waves are only expected at 2BPF and 3BPF. In the first case, the computations showed excellent agreement with linear theory predictions. The frequency and spatial mode order of acoustic field was computed and found consistent with linear theory. Further, the propagation of the generated modes was also correctly predicted. The upstream going waves propagated from the domain without reflection from the in ow boundary. However, reflections from the out ow boundary were noticed. The amplitude of the reflected wave was approximately 5% of the incident wave. The second set of computations were used to determine the influence of steady loading on the generated noise. Toward this end, the acoustic response was determined with three steady loading conditions: design, low-loading, high-loading. The overall trend showed significant (approximately 10 dB) increases in the generated noise for the highly loaded stator.

Sawyer, Scott↗
NASA NTRS2003

Volumetric Near-Field Microwave Plasma Generation

A periodic series of microwave-induced plasmoids is generated using the outgoing wave from a microwave horn and the reflected wave from a nearby on-axis concave reflector. The plasmoids are spaced at half-wavelength separations according to a standing-wave pattern. The plasmoids are enhanced by an effective focusing in the near field of the horn (Fresnel region) as a result of a diffractive narrowing. Optical imaging, electron density, and rotational temperature measurements characterize the near field plasma region. Volumetric microwave discharges may have application to combustion ignition in scramjet engines.

Exton, R. J.↗
NASA NTRS1982

Ultrasonic input-output for transmitting and receiving longitudinal transducers coupled to same face of isotropic elastic plate

The quantitative understanding of ultrasonic nondestructive evaluation parameters such as the stress wave factor were studied. Ultrasonic input/output characteristics for an isotropic elastic plate with transmitting and receiving longitudinal transducers coupled to the same face were analyzed. The asymptotic normal stress is calculated for an isotropic elastic half space subjected to a uniform harmonic normal stress applied to a circular region at the surface. The radiated stress waves are traced within the plate by considering wave reflections at the top and bottom faces. The output voltage amplitude of the receiving transducer is estimated by considering only longitudinal waves. Agreement is found between the output voltage wave packet amplitudes and times of arrival due to multiple reflections of the longitudinal waves.

Williams, J. H., Jr.↗
NASA NTRS1999

The Heliosphere as Resonant Cavity

If a disturbance in the supersonic solar wind reaches the heliospheric shock, a number of events ensue. First, the shock itself responds with inward or outward motion. Secondly, the disturbance propagates outward through the heliosheath as a sound or magnetoacoustic wave; eventually it reaches the heliopause and is (partially) reflected back toward the termination shock. The reflected wave can return to the shock, affecting the shock's motion, and be reflected yet again. The repetition of these processes can produce a 'ringing' in the heliosheath. This suggests that it may be useful to regard the heliosheath as a resonant acoustic cavity with inner and outer boundaries at the termination shock and heliopause, respectively. To evaluate this concept we have developed a simple model of small-amplitude resonant oscillations in an outwardly flowing gas, with appropriate boundary conditions (shock on the interior, tangential discontinuity on the exterior boundary). The fundamental mode of oscillation has a period of order T approx. 2D/C, where C is the speed of sound in the heliosheath and D is the distance between the two boundaries. Typical numerical models of the heliosphere give C approx. 200-500 km/s and D approx. 20 - 100 AU, giving T approx. 0.5 - 2.5 years. Hence we suggest that motions of the heliosheath and termination shock will occur with time scales of the order of a year, and are the consequence of the resonant nature of the heliospheric cavity rather than the history of variation at the Sun and/or in the solar wind. In particular, we suggest that the motion of the termination shock may be unrelated to solar variations over the time scale of the sunspot cycle.

Bames, Aaron↗
NASA NTRS1978

Whistler mode noise in Jupiter's inner magnetosphere

A study is made of the amplitude and spectral extent of whistler mode noise in the inner magnetosphere of Jupiter. It is found that the 'hat-shaped' pitch angle distributions of energetic electrons (21 and 31 MeV at L=3) are consistent with those predicted in the presence of a band-limited spectrum of whistler mode noise. The equatorial maximum linear growth rate of parallel propagating whistlers are consistent with those necessary to limit the energetic electron intensities by the whistler mode instability. It is noted that the wave phase speeds before wave reflection can occur at high latitudes and that wave growth is limited to a disk-like region centered around the magnetic equator. The frequency extent of the whistler mode noise spectrum may be estimated by the range of frequencies maximally unstable to equatorial linear growth. A value is found for the spectral density of the broadband whistler mode noise necessary to balance radial diffusion of energetic electrons above the critical range, and an expression is derived for the energetic electron system response to fluctuations about the limiting flux value.

Sentman, D. D.↗
NASA NTRS1997

Wave Driven Exothermic Heating in the Mesopause Region

A full-wave propagation model was developed that describes the propagation of gravity waves from the Earth's surface to the upper boundary, which can be placed anywhere between 150 and 500 km altitude. The model includes a realistic background atmosphere, and includes the effects of mean horizontal winds and their vertical shears, mean vertical temperature gradients, the eddy and molecular diffusion of heat and momentum, and the effects of ion-drag. This model solves five coupled second-order differential equations (continuity, momentum, and energy) in the vertical coordinate to derive the perturbation variables u', v', w' (horizontal and vertical velocity components), T' (temperature) and p' (pressure). The upper boundary can be automatically selected based on tests using the radiation condition at the upper boundary, wherein the height is increased until the wave is experiencing severe dissipation at the upper boundary, ensuring that substantial absorption occurs for any waves reflected from the upper boundary. The determination of wave amplitude is a key requirement of wave energetics. Therefore, the fullwave model has been applied to airglow observations in order to determine wave amplitudes as a function of altitude. This was accomplished by using the full-wave model output to drive a chemistry perturbation module that describes minor species perturbations and the resulting airglow perturbations. The full-wave output was multiplied by an altitude-independent factor such that the modeled and observed relative airglow intensity perturbations were equal. The effects of mean winds were included in these studies, and found to be the most important model input affecting the calculations (being more important than the choice of eddy diffusion profiles and chemical kinetic coefficients). In one study (Hickey et al., 1997a) these winds could not be well estimated from the measurements, whereas in the second study (Hickey et al.,1997b) the mean were well defined with a sodium wind-temperature lidar.

Hickey, Michael P.↗
NASA NTRS2024

Hopkinson Bar Impact Force Measurement for Application to Development of an Artificial Bird

A test method has been published for measuring forces from bird cadavers and artificial birds to demonstrate equivalency to support the use of artificial birds in aircraft certification testing. The test method involves a large diameter Hopkinson bar as the technique for measuring and comparing forces. The method involves the assumption that a force on one end of the bar results in a one-dimensional plane wave that travels down the bar. To avoid reflected waves from the end of the bar overlapping the input pulse, and due to practical limitations on the length of the bar, strain transducers are located relatively close to the impacted face of the bar, raising questions about the validity of the assumption of one-dimensional wave propagation. In addition, the large diameter of the bar can introduce dispersion effects in the propagated pulse. These must be assessed to determine the impact on the accuracy of impact force measurements and, if significant, dispersion correction techniques must be used. In this study analytical, experimental, and computational methods are used to analyze the wave propagation characteristics for impact forces expected from realistic bird impacts. While wave dispersion and effects of non-concentric impacts are present, the resulting errors are relatively small. For the response we expect to see in bird impacts up to velocities of approximately 300 m/sec the large diameter Hopkinson bar test appears to be an acceptable method for measuring the impact forces and comparing the response of real and proposed artificial birds.

Birdstrike↗
NASA NTRS1991

A new surface impedance function for the aperture surface of a conducting body with a dielectric-filled cavity

A surface impedance function (SIF) appropriate for use on the aperture surface of a conducting body with a dielectric-filled cavity, is presented. Unlike the usual SIFs that might be used on an aperture, this SIF takes into account not only the wave transmitted through the aperture but also the wave reflected from the inside of the cavity the shape of the aperture and cavity, and the polarization and direction of the incident wave. The SIF is derived heuristically from the series-reflection solution for a plane wave normally incident on an infinite flat conducting plate with a flat dielectric coating. The SIF was developed and used in a combined method of moments (MM) solution for the scattered fields due to an incident plane wave. This combined technique greatly reduces the number of current expansion coefficients to be determined using the method of moments and hence also reduces the number of impedance elements required for calculation in the method of moments. Application of the SIF in a combined method is illustrated for a two-dimensional object.

Goggans, Paul M.↗
NASA NTRS1991

Effects of the Gulf Stream on ocean waves

In the present study a third-generation numerical wave model is used to study effects of a straight Gulf Stream ring on ocean waves in swell and storm conditions. The model accounts for all relevant processes of propagation, generation, and dissipation of the waves (including current effects) without imposing a priori restraints on the spectral development of the waves. The dominating mechanism affecting the waves appears to be current-induced refraction even though the short-crestedness of the incoming waves tends to mask its effects (also in swell conditions). Depending on wind and wave conditions, refraction may trap locally generated waves in the straight Gulf Stream or it may reflect wave energy back to the open ocean. In the Gulf Stream ring, refraction induces a considerable variation in significant wave height and short-crestedness, but it hardly affects the mean wave direction. In storm conditions the processes of generation and dissipation are considerably enhanced in countercurrent situations and reduced following-current situations.

Holthuijsen, L. H.↗