Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “UNTREATED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Temporary Arterial Embolization of Liver Parenchyma with Degradable Starch Microspheres (EmboCept{sup ®}S) in a Swine Model

BackgroundThis study aimed to evaluate the embolic properties, time to reperfusion, and histologic changes in temporary embolization of liver tissue with degradable starch microspheres (DSM) in a swine model.MethodsIn four adult minipigs, DSMs were injected into the right or left hepatic artery on the lobar level until complete stasis of the blood flow was detectable angiographically. The time required to complete angiographically determined reperfusion was noted. The animals were killed 3 h after complete reperfusion, and samples were taken from the liver. Histologic examinations of the embolized liver parenchyma and untreated tissue were performed.ResultsHepatic arterial embolization using DSMs was technically successful in all cases, with complete blood flow stasis shown by control angiography. A single vial of DSMs (450 mg/7.5 ml) was sufficient to embolize a whole liver lobe in all cases. Angiography showed complete reconstitution of hepatic arterial perfusion after a mean time to reperfusion of 32 ± 6.1 min (range, 26–39 min). Hematoxylin and eosin staining showed no histologically detectable differences between untreated tissue and parenchyma embolized with DSMs except for mild sinusoidal congestion in one case. Indirect in situ DNA nick end labeling staining (TUNEL) showed only single positive hepatocytes, indicating apoptosis.ConclusionTemporary embolization of the hepatic artery using DSMs is feasible with complete reperfusion after 30 min in pigs. Even after complete arterial blood flow stasis, no extensive tissue damage to the embolized liver parenchyma was observed at histologic examinations in this short-term study.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Radiographic Local Tumor Control and Pain Palliation of Sarcoma Metastases within the Musculoskeletal System with Percutaneous Thermal Ablation

PurposeTo evaluate the effectiveness of percutaneous image-guided thermal ablation in achieving local tumor control and pain palliation of sarcoma metastases within the musculoskeletal system.Materials and MethodsRetrospective review of 64 sarcoma metastases within the musculoskeletal system in 26 women and 15 men (total = 41) treated with ablation between December 2011 and August 2016 was performed. Mean age of the cohort was 42.9 years ± 16.0 years. Two subgroups were treated: oligometastatic disease (n = 13) and widely metastatic disease (n = 51). A variety of sarcoma histologies were treated with average tumor volume of 42.5 cm{sup 3} (range 0.1–484.7 cm{sup 3}). Pain scores were recorded before and 4 weeks after therapy for 59% (38/64) of treated lesions. Follow-up imaging was evaluated for local control and to monitor sites of untreated disease as an internal control. Fifty-eight percent (37/64) were lost to imaging follow-up at varying time points over a year. Complication rate was 5% (3/64; one minor and two major events).ResultsOne-year local tumor control rates were 70% (19/27) in all patients, 67% (12/18) in the setting of progression of untreated metastases, and 100% (10/10) in the setting of oligometastatic disease. Median pain scores decreased from 8 (interquartile range 5.0–9.0) to 3 (interquartile range 0.1–4.0) 1 month after the procedure (P < 0.001).ConclusionImage-guided percutaneous ablation is an effective option for local tumor control and pain palliation of metastatic sarcomas within the musculoskeletal system. Treatment in the setting of oligometastatic disease offers potential for remission. Level of Evidence: Level 4, Retrospective Review.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The Accumulation and Effects of Liposomal Doxorubicin in Tissues Treated by Radiofrequency Ablation and Irreversible Electroporation in Liver: In Vivo Experimental Study on Porcine Models

Purpose: To compare the accumulation and effect of liposomal doxorubicin in liver tissue treated by radiofrequency ablation (RFA) and irreversible electroporation (IRE) in in vivo porcine models. Materials and Methods: Sixteen RFA and 16 IRE procedures were performed in healthy liver of two groups of three pigs. Multi-tined RFA parameters included: 100 W, target temperature 105°C for 7 min. 100 IRE pulses were delivered using two monopolar electrodes at 2250 V, 1 Hz, for 100 µsec. For each group, two pigs received 50 mg liposomal doxorubicin (0.5 mg/kg) as a drip infusion during ablation procedure, with one pig serving as control. Samples were harvested from the central and peripheral zones of the ablation at 24 and 72 h. Immunohistochemical analysis to evaluate the degree of cellular stress, DNA damage, and degree of apoptosis was performed. These and the ablation sizes were compared. Doxorubicin concentrations were also analyzed using fluorescence photometry of homogenized tissue. Results: RFA treatment zones created with concomitant administration of doxorubicin at 24 h were significantly larger than controls (2.5 ± 0.3 cm vs. 2.2 ± 0.2 cm; p = 0.04). By contrast, IRE treatment zones were negatively influenced by chemotherapy (2.2 ± 0.4 cm vs. 2.6 ± 0.4 cm; p = 0.05). At 24 h, doxorubicin concentrations in peripheral and central zones of RFA were significantly increased in comparison with untreated parenchyma (0.431 ± 0.078 µg/g and 0.314 ± 0.055 µg/g vs. 0.18 ± 0.012 µg/g; p < 0.05). Doxorubicin concentrations in IRE zones were not significantly different from untreated liver (0.191 ± 0.049 µg/g and 0.210 ± 0.049 µg/g vs. 0.18 ± 0.012 µg/g). Conclusions: Whereas there is an increased accumulation of periprocedural doxorubicin and an associated increase in ablation zone following RFA, a contrary effect is noted with IRE. These discrepant findings suggest that different mechanisms and synergies will need to be considered in order to select optimal adjuvants for different classes of ablation devices.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Engineering the cellulolytic extreme thermophile Caldicellulosiruptor bescii to reduce carboxylic acids to alcohols using plant biomass as the energy source

Abstract Caldicellulosiruptor bescii is the most thermophilic cellulolytic organism yet identified (Topt 78 °C). It grows on untreated plant biomass and has an established genetic system thereby making it a promising microbial platform for lignocellulose conversion to bio-products. Here, we investigated the ability of engineered C. bescii to generate alcohols from carboxylic acids. Expression of aldehyde ferredoxin oxidoreductase (aor from Pyrococcus furiosus) and alcohol dehydrogenase (adhA from Thermoanaerobacter sp. X514) enabled C. bescii to generate ethanol from crystalline cellulose and from biomass by reducing the acetate produced by fermentation. Deletion of lactate dehydrogenase in a strain expressing the AOR–Adh pathway increased ethanol production. Engineered strains also converted exogenously supplied organic acids (isobutyrate and n-caproate) to the corresponding alcohol (isobutanol and hexanol) using both crystalline cellulose and switchgrass as sources of reductant for alcohol production. This is the first instance of an acid to alcohol conversion pathway in a cellulolytic microbe.

Biotechnology & Applied Microbiology↗

Enhancement of Mechanical Properties of Bio-Resin Epoxy/Flax Fiber Composites using Acetic Anhydride

Chemically treated acetic anhydride (AA) flax fiber mats were investigated. Bio-based epoxy resin and conventional epoxy resin unidirectional fiber composites were manufactured using a vacuum bagging technique. Flax fibers in the bio-resin composites were chemically treated with 1, 2, 3 and 4% (AA), while the fibers used with the conventional resin were not treated. The composites with the conventional resin were compared with the bio-resin in an untreated condition. A 2% AA treatment improved the bio-resin composite tensile strength, stiffness and bond shear strength by 55%, 58% and 7%, respectively. These three properties were evaluated and the results statistically analyzed using ANOVA. The AA reduced moisture absorption intake and improved adhesion of the fiber/matrix interface. The composites treated with 1–2% AA were most successful with a 65% moisture resistance. The scanning electron microscope was used to observe the fiber surface and fractured surfaces of the untreated and treated flax fibers. A chemical pre-treatment has improved the composite mechanical and moisture resistance over the non-treated fiber composites.

36 MATERIALS SCIENCE↗

Effect of Alkali Treatment on Mechanical and Morphological Properties of Pineapple Leaf Fibre/Polyester Composites

In this study, our aim is to analyze the influence of fibre treatments and different fibre loading on mechanical, physical and chemical properties of pineapple leaf fibre reinforced polyester composites (PALF/PE). Fibre treatments were carried out with 1 N NaOH and KOH for 1 h. The untreated and treated PALF/PE composites were fabricated with 25 wt%, 35 wt% and 45 wt% fibre loadings by compression molding technique. Fourier Transform Infrared Spectroscopy (FTIR) was used to understand the effects of chemical treatment on PALF mechanical test results revealed that 45 wt% of PALF/PE composites treated with NaOH showed a 35% increase in tensile strength compared to untreated PALF/PE composites. The tensile modulus and the flexural module are also the highest at 45 wt% of KOH treated composites. The highest impact strength of 70 J/m was obtained for PALF/PE composites with NaOH treated fibres at 25% fibre loading. The results show that the fibre treatments in terms of the flexural and inter-laminar shear strength of composites were not effective. SEM of the tensile fractured specimen of PALF/PE composites revealed the changes in fibre characteristics due to the alkali treatment and less fibre pull-out at higher fibre loading. Overall we conclude that 1 N NaOH, 45 wt% treated PALF/PE composites satisfactorily and effectively improved both the mechanical and morphological properties. Obtained composites would be promising for construction materials, furniture and automotive components due to their superior strength and modulus at higher fibre loading.

36 MATERIALS SCIENCE↗

Effective surface passivation of CdMnTe materials

Passivation is an important process that reduces surface leakage current and its attendant noise. We treated detector-grade large-volume CdMnTe:In samples with an (NH{sub 4})-based passivant, and compared the results with untreated samples by measuring current-voltage characteristics, surface recombination velocity, Raman spectroscopy, and charge-collection mapping. The leakage current of the passivated CdMnTe (CMT) detectors decreased five to ten times, and surface recombination declined five to six times, depending on the passivation conditions applied. We satisfactorily explained these improvements in detector performance as resulting from different passivation layers that were generated by distinct chemical reactions, as determined by the pH of the passivant.

36 MATERIALS SCIENCE↗

Tribological Properties of Surface-Textured and Plasma-Nitrided Pure Titanium Under Oil Lubrication Condition

Plasma nitriding was conducted as post-treatment for surface texture on pure titanium to obtain a continuous nitriding layer. Supersonic fine particles bombarding (SFPB) was carried out to prepare surface texture. The surface morphologies and chemical composition were analyzed using scanning electron microscope and energy disperse spectroscopy. The microstructures of modified layers were characterized by transmission electron microscope. The tribological properties of surface-textured and duplex-treated pure titanium under oil lubrication condition were systematically investigated in the ball-on-plate reciprocating mode. The effects of applied load and sliding velocity on the tribological behavior were analyzed. The results show that after duplex treatments, the grains size in modified layer becomes slightly larger, and hardness is obviously improved. Wear resistance of duplex-treated pure titanium is significantly improved referenced to untreated and surface-textured pure titanium, which is 3.22 times as much as untreated pure titanium and 2.15 times of that for surface-textured pure titanium, respectively.

36 MATERIALS SCIENCE↗

Cathodic Cage Plasma Pre-treatment of TiN-Coated AISI-304 Stainless Steel for Enhancement of Mechanical Strength and Wear Resistance

Although austenitic stainless steels (ASSs) are known for their superior corrosion resistance properties, the use of such materials in motion contact parts is limited due to their low wear resistance. Previous studies reveal that titanium nitride (TiN) coating of ASS significantly improves its hardness and surface morphology but not the wear resistance due to weak interfacing with the substrate. Since plasma nitriding is a flexible and multifunctional case-hardening process, an attempt was made to improve the wear resistance of TiN-coated AISI-304 stainless steel by subjecting it to pre-treatment by pulsed DC cathodic cage plasma nitriding (CCPN) in the abnormal glow region. The hardness of the TiN-coated steel samples (with and without CCPN pre-treatment) was measured using Vickers micro-hardness tester. This test revealed maximum hardness of 2284 HV after plasma treatment of TiN-coated steel. The untreated TiN-coated steel exhibited 10.6 times lower hardness than the plasma pre-treated TiN-coated steel (CCPN-TiN). XRD analysis of the untreated TiN-coated steel showed strong diffraction peaks of TiN (311) and (400) in the spectrum, whereas plasma pre-treated sample contained dominant peaks of TiN (111), (200) and (220). The ball-on-disk wear tester was used to investigate the wear behavior of the samples. Very small wear rate and friction coefficient were reported for CCPN-TiN-coated steel. The observed low wear rate was probably due to the development of a subsurface (i.e., nitrided surface) on TiN-coated steel during CCPN pre-treatment.

36 MATERIALS SCIENCE↗

A micrometeorological flux perspective on brush management in a shrub-encroached Sonoran Desert grassland

Woody plant encroachment typically limits the forage productivity of managed rangelands and alters a panoply of semiarid ecosystem processes and services. Intervention strategies to reduce woody plant abundance, collectively termed “brush management”, often lack observations to quantify and interpret changes in ecosystem processes. Furthermore, comparative studies between treated and untreated areas should account for heterogeneity since plant composition, microclimate, topoedaphic factors, and historical land use can substantially vary over short distances in drylands. Here, in this work, we quantify ecosystem responses to brush management after a single aerial herbicide application on an 18 hectare shrub-encroached grassland (savanna) in southern Arizona, USA. We conducted a pre- and post-treatment comparison of a flux tower site in the treated area with that of a tower in a nearby control site. The comparison, spanning a seven year period, included: (1) ground, airborne, and satellite-based measurements of vegetation structure, and (2) eddy covariance measurements. The herbicide treatment defoliated the dominant shrub (velvet mesquite, Prosopis velutina) and led to a temporary reduction in summer greening, but full foliar recovery occurred within two years. Contrary to expectations, perennial grass cover decreased and bare soil cover increased on the treated site. Relative amounts of evapotranspiration were reduced, while carbon uptake increased during the 2 year post-treatment period at the treated site due to a higher water use efficiency in the following spring. During mesquite recovery, carbon uptake was enhanced by higher gross primary productivity and accompanied by a decrease in ecosystem respiration relative to the untreated site. Mesquite recovery was facilitated by access to deep soil water, carbohydrate reserves in rooting systems, and a lower competition from reduced perennial grass cover.

54 ENVIRONMENTAL SCIENCES↗

Steam explosion of oil palm residues for the production of durable pellets

Here we investigated the effect of steam explosion pretreatment on the physical and mechanical properties of the pellets made from empty fruit bunch (EFB) and palm kernel shell (PKS) and we compared to that of softwood Douglas fir (DF). We found that the high heating value of the empty fruit bunch was increased by 21% after steam explosion pretreatment. The pellet density of EFB and Douglas fir pellets did not change while the pellet density of PKS increased from 1.13 to 1.21 g/cm 3 after steam explosion. That may be attributed to the rapid volatilization of high mass fraction extractives during high pressure steaming and lead to the shrinkage of micropores of the PKS fibers. The maximum brealdng strength of steam exploded EFB and PKS were increased by 63% and 45%, respectively. The required compaction energy for the steam exploded EFB pellet is 44.50 J/g while that of the untreated EFB pellet is 30.15 J/g. Similar to Douglas fir, the required extrusion energy for the steam exploded EFB pellet was about 6 times than that of the untreated EFB pellet. The increased extrusion energy is mainly contributed by the increase in mono-saccharides by auto-hydrolysis during steam explosion pretreatment.

09 BIOMASS FUELS↗

Protective spin-labeled fluorenes maintain amyloid beta peptide in small oligomers and limit transitions in secondary structure

Alzheimer's disease is characterized by the presence of extracellular plaques comprised of amyloid beta (Aβ) peptides. Soluble oligomers of the Aβ peptide underlie a cascade of neuronal loss and dysfunction associated with Alzheimer's disease. Here, single particle analyses of Aβ oligomers in solution by fluorescence correlation spectroscopy (FCS) were used to provide real-time descriptions of how spin-labeled fluorenes (SLFs; bi-functional small molecules that block the toxicity of Aβ) prevent and disrupt oligomeric assemblies of Aβ in solution. Furthermore, the circular dichroism (CD) spectrum of untreated Aβ shows a continuous, progressive change over a 24-hour period, while the spectrum of Aβ treated with SLF remains relatively constant following initial incubation. These findings suggest the conformation of Aβ within the oligomer provides a complementary determinant of Aβ toxicity in addition to oligomer growth and size. Although SLF does not produce a dominant state of secondary structure in Aβ, it does induce a net reduction in beta secondary content compared to untreated samples of Aβ. The FCS results, combined with electron paramagnetic resonance spectroscopy and CD spectroscopy, demonstrate SLFs can inhibit the growth of Aβ oligomers and disrupt existing oligomers, while retaining Aβ as a population of smaller, yet largely disordered oligomers.

59 BASIC BIOLOGICAL SCIENCES↗

Cadmium exposure inhibits MMP2 and MMP9 activities in the prostate and testis

Matrix metalloproteinases (MMPs) are zinc (Zn{sup 2+}) and calcium (Ca{sup 2+}) dependant endopeptidases, capable of degradation of numerous components of the extracellular matrix. Cadmium (Cd{sup 2+}) is a well known environmental contaminant which could impair the activity of MMPs. In this sense, this study was conducted to evaluate if Cd{sup 2+} intake inhibits these endopeptidases activities at the rat prostate and testicles and if it directly inhibits the activity of MMP2 and MMP9 at gelatinolytic assays when present in the incubation buffer. To investigate this hypothesis, Wistar rats (5 weeks old), were given tap water (untreated, n = 9), or 15 ppm CdCl{sub 2} diluted in drinking water, during 10 weeks (n = 9) and 20 weeks (n = 9). The animals were euthanized and their ventral prostate, dorsal prostate, and testicles were removed. These tissue samples were processed for protein extraction and subjected to gelatin zymography evaluation. Additionally, we performed an experiment of gelatin zymography in which 5 μM or 2 mM cadmium chloride (CdCl{sub 2}) was directly dissolved at the incubation buffer, using the prostatic tissue samples from untreated animals that exhibited the highest MMP2 and MMP9 activities in the previous experiment. We have found that CdCl{sub 2} intake in the drinking water led to the inhibition of 35% and 30% of MMP2 and MMP9 (p < 0.05) at the ventral prostate and testis, respectively, in Cd{sup 2+} treated animals when compared to controls. Moreover, the activities of the referred enzymes were 80% and 100% inhibited by 5 μM and 2 mM of CdCl{sub 2}, respectively, even in the presence of 10 mM of CaCl{sub 2} within the incubation buffer solution. These important findings demonstrate that environmental cadmium contamination may deregulate the natural balance in the extracellular matrix turnover, through MMPs downregulation, which could contribute to the toxic effects observed in prostatic and testicular tissue after its exposure. - Highlights: • Wistar rats were given tap water or 15 ppm CdCl{sub 2} diluted in drinking water. • Ventral prostate, dorsal prostate, and testicles were tested for MMPs activity. • CdCl{sub 2} was also directly dissolved at the incubation buffer in another experiment. • Cadmium inhibited the activity of MMP2 and MMP9 in both experiments. • Cadmium contamination may deregulate the natural balance in the ECM turnover.

60 APPLIED LIFE SCIENCES↗

Transcriptome sequencing and differential gene expression analysis in Viola yedoensis Makino (Fam. Violaceae) responsive to cadmium (Cd) pollution

Viola yedoensis Makino is an important Chinese traditional medicine plant adapted to cadmium (Cd) pollution regions. Illumina sequencing technology was used to sequence the transcriptome of V. yedoensis Makino. We sequenced Cd-treated (VIYCd) and untreated (VIYCK) samples of V. yedoensis, and obtained 100,410,834 and 83,587,676 high quality reads, respectively. After de novo assembly and quantitative assessment, 109,800 unigenes were finally generated with an average length of 661 bp. We then obtained functional annotations by aligning unigenes with public protein databases including NR, NT, SwissProt, KEGG and COG. In addition, 892 differentially expressed genes (DEGs) were investigated between the two libraries of untreated (VIYCK) and Cd-treated (VIYCd) plants. Moreover, 15 randomly selected DEGs were further validated with qRT-PCR and the results were highly accordant with the Solexa analysis. This study firstly generated a successful global analysis of the V. yedoensis transcriptome and it will provide for further studies on gene expression, genomics, and functional genomics in Violaceae. - Highlights: • A de novo assembly generated 109,800 unigenes and 5,4479 of them were annotated. • 31,285 could be classified into 26 COG categories. • 263 biosynthesis pathways were predicted and classified into five categories. • 892 DEGs were detected and 15 of them were validated by qRT-PCR.

60 APPLIED LIFE SCIENCES↗

Up-regulation of DRP-3 long isoform during the induction of neural progenitor cells by glutamate treatment in the ex vivo rat retina

Glutamate has been shown to induce neural progenitor cells in the adult vertebrate retina. However, protein dynamics during progenitor cell induction by glutamate are not fully understood. To identify specific proteins involved in the process, we employed two-dimensional electrophoresis-based proteomics on glutamate untreated and treated retinal ex vivo sections. Rat retinal tissues were incubated with 1 mM glutamate for 1 h, followed by incubation in glutamate-free media for a total of 24 h. Consistent with prior reports, it was found that mitotic cells appeared in the outer nuclear layer without any histological damage. Immunohistological evaluations and immunoblotting confirmed the emergence of neuronal progenitor cells in the mature retina treated with glutamate. Proteomic analysis revealed the up-regulation of dihydropyrimidinase-related protein 3 (DRP-3), DRP-2 and stress-induced-phosphoprotein 1 (STIP1) during neural progenitor cell induction by glutamate. Moreover, mRNA expression of DRP-3, especially, its long isoform, robustly increased in the treated retina compared to that in the untreated retina. These results may indicate that glutamate induces neural progenitor cells in the mature rat retina by up-regulating the proteins which mediate cell mitosis and neurite growth. - Highlights: • Glutamate induced neuronal progenitor cells in the mature rat retina. • Proteomic analysis revealed the up-regulation of DRP-3, DRP-2 and STIP1. • mRNA expression of DRP-3, especially, its long isoform, robustly increased.

60 APPLIED LIFE SCIENCES↗

1α,25-Dihydroxyvitamin D3 increases implant osseointegration in diabetic mice partly through FoxO1 inactivation in osteoblasts

Highlights: • FoxO1 ablation in osteoblasts favors glucose homeostasis in diabetic mice. • 1,25(OH){sub 2}D{sub 3} regulates glucose and bone metabolism partly through inactivation of FoxO1. • FoxO1 inhibitor may be a novel approach to enhance implant osseointegration. Oral implant osseointegration is delayed by hyperglycemia-generated oxidative stress (OS). Forkhead transcription factor 1 (FoxO1) is known to be viewed as a sensor to OS since reactive oxide species like H{sub 2}O{sub 2} regulates its activity. We previously demonstrated that 1,25(OH){sub 2}D{sub 3} favored glucose homeostasis and implant osseointegration in diabetic rats. In this study, we investigated the role of FoxO1{sub OB} in the regulation process of 1,25(OH){sub 2}D{sub 3} on glycometabolism and bone metabolism. We show herein that, with the treatment of 1,25(OH){sub 2}D{sub 3}, mice lacking FoxO1 in osteoblasts (FoxO1{sub OB}{sup −/-}) exhibited decreased serum glucose that was gradually elevated in untreated diabetic mice. An optimal increase of bone mass and bone-implant contact (BIC) was observed in 1,25(OH){sub 2}D{sub 3} treated FoxO1{sub OB}{sup −/-} mice after 2-month healing. Surprisingly, FoxO1{sub OB}{sup −/-} mice without 1,25(OH){sub 2}D{sub 3} treatment also showed an improvement on bone formation and BIC. Same effect could be found in the expression of bone-related markers Runx2, Osterix and BSP, which elevated in 1,25(OH){sub 2}D{sub 3} treated FoxO1{sub OB}{sup −/-} mice as compared to untreated WT mice. In addition, in vitro study showed that high glucose induced FoxO1 nuclear localization while the effect was ameliorated by 1,25(OH){sub 2}D{sub 3} treatment. These results suggest that FoxO1{sub OB} might be involved in the regulation of 1,25(OH){sub 2}D{sub 3} on glucose homeostasis and bone formation, and that FoxO1{sub OB} might act as a key modulator of the capacity of the skeleton regulating metabolic homeostasis. Our study also provides a new idea that a combination of systemic 1,25(OH){sub 2}D{sub 3} and local FoxO1 inhibitor may be a new approach to enhance implant osseointegration.

60 APPLIED LIFE SCIENCES↗

Screening and identification of potential protein biomarkers for evaluating the efficacy of intensive therapy in pulmonary tuberculosis

Highlights: • The one-year cure rate was significantly higher in sputum negative patients after 2-months intensive therapy. • Four potential biomarkers were found for evaluating the efficacy of 2-months intensive therapy in TB patients. • CO7 and ANGT could serve as potential biomarkers to evaluate the bacteriological condition of Mycobacterium tuberculosis after intensive therapy. This research aimed to discover potential biomarkers for evaluating the therapeutic efficacy of intensive therapy in pulmonary tuberculosis (TB). Protein profiles in 2-months intensively treated TB patients, untreated TB patients, and healthy controls were investigated with iTRAQ-2DLC-MS/MS technique. 71 differential proteins were identified in 2-months intensively treated TB patients. Significant differences in complement component C7 (CO7), apolipoprotein A-IV (APOA4), apolipoprotein C-II (APOC2), and angiotensinogen (ANGT) were found by ELISA validation. CO7 and ANGT were also found significantly different in sputum negative patients, compared with sputum positive patients after intensive treatment. Clinical analysis showed that after 2-months intensive treatment several indicators were significantly changed, and the one-year cure rate of sputum negative patients were significantly higher than sputum positive patients. Diagnostic models consisting of APOC2, CO7 and APOA4 were established to distinguish intensively treated TB patients from untreated TB patients and healthy controls with the AUC value of 0.910 and 0.935. Meanwhile, ANGT and CO7 were combined to identify sputum negative and sputum positive TB patients after intensive treatment with 89.36% sensitivity, 71.43% specificity, and the AUC value of 0.853. The results showed that APOC2, CO7, APOA4, and ANGT may be potential biomarkers for evaluating the efficacy of intensive anti-TB therapy.

60 APPLIED LIFE SCIENCES↗