Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Origin of hydroxyl pair formation on reduced anatase TiO 2 (101)

The interaction of water with metal oxide surfaces is of key importance to several research fields and applications. Because of its ability to photo-catalyze water splitting, reducible anatase TiO 2 (a-TiO 2 ) is of particular interest. Here, we combine experiments and theory to study the dissociation of water on bulk-reduced a-TiO 2 (101). Following large water exposures at room temperature, point-like protrusions appear on the a-TiO 2 (101) surface, as shown by scanning tunneling microscopy (STM). These protrusions originate from hydroxyl pairs, consisting of terminal and bridging OH groups, OH t /OH b , as revealed by infrared reflection absorption spectroscopy (IRRAS) and valence band experiments. Utilizing density functional theory (DFT) calculations, we offer a comprehensive model of the water/a-TiO 2 (101) interaction. In conclusion, this model also explains why the hydroxyl pairs are thermally stable up to ~480 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dynamic compression of TiO 2 to 221 GPa

The high-pressure dynamic response of titanium dioxide (TiO 2 ) is not only of interest because of its numerous industrial applications but also because of its structural similarities to silica (SiO 2 ). We performed plate impact experiments in a two-stage light gas gun, at peak stresses from 64 to 221 GPa to determine the TiO 2 response along the Hugoniot. The lower stress experiment at 64 GPa shows an elastic behavior followed by an elastic–plastic transition, whereas the high stress experiments above 64 GPa show a single wave structure. Previous shock studies have shown the presence of high-pressure phases (HPP) I (26 GPa) and HPP II (100 GPa); however, our data suggest that the HPP I phase is stable up to 150 GPa. Using a combination of data from our current study and our previous Z-data, we determine that TiO 2 likely melts on the Hugoniot at 157 GPa. Furthermore, our data confirm that TiO 2 is not highly incompressible as shown by a previous study.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Evolution of magnetic surfboards and spin glass behavior in (Fe 1- p Ga p ) 2 TiO 5

The unusual anisotropy of the spin glass (SG) transition in the pseudobrookite system Fe 2 TiO 5 has been interpreted as arising from an induced, van der Waals-like, interaction among magnetic clusters. Here we present susceptibility ($\chi$) and specific heat data ($C$) for Fe 2 TiO 5 diluted with non-magnetic Ga, (Fe 1- p Ga p ) 2 TiO 5 , for disorder parameter $p$ = 0, 0.11, and 0.42, and elastic neutron scattering data for $p$ = 0.20. A uniform suppression of ${T_g}$ is observed upon increasing $p$, along with a value of $\chi \left( {{T_g}} \right)$ that increases as $T_g$ decreases, i.e. $d\chi ({T_g})/d{T_g} < 0$ We also observe $C\left( T \right) \propto {T^2}$ in the low temperature limit. In conclusion, the observed behavior places (Fe 1- p Ga p ) 2 TiO 5 in the category of a strongly geometrically frustrated SG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Phase segregation and miscibility of TiO x nanocomposites in Gd-doped ceria solid electrolyte material

Electro-chemo-mechanical (ECM) coupling refers to mechanical deformation due to electrochemically driven compositional change in a solid. An ECM actuator producing micrometre-size displacements and long-term stability at room temperature was recently reported, comprising a 20 mol% Gd-doped ceria (20GDC), a solid electrolyte membrane, placed between two working bodies made of TiO x /20GDC (Ti-GDC) nanocomposites with Ti concentration of 38 mol%. The volumetric changes originating from oxidation or reduction in the local TiO x units are hypothesized to be the origin of mechanical deformation in the ECM actuator. Studying the Ti concentration-dependent structural changes in the Ti-GDC nanocomposites is therefore required for (i) understanding the mechanism of dimensional changes in the ECM actuator and (ii) maximizing the ECM response. Here, the systematic investigation of the local structure of the Ti and Ce ions in Ti-GDC over a broad range of Ti concentrations using synchrotron X-ray absorption spectroscopy and X-ray diffraction is reported. The main finding is that, depending on the Ti concentration, Ti atoms either form a cerium titanate or segregate into a TiO 2 anatase-like phase. The transition region between these two regimes with Ti(IV) concentration between 19% and 57% contained strongly disordered TiO x units dispersed in 20GDC containing Ce(III) and Ce(IV) and hence rich with oxygen vacancies. As a result, this transition region is proposed to be the most advantageous for developing ECM-active materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Layer-resolved ultrafast extreme ultraviolet measurement of hole transport in a Ni-TiO 2 -Si photoanode

Metal oxide semiconductor junctions are central to most electronic and optoelectronic devices, but ultrafast measurements of carrier transport have been limited to device-average measurements. Here, charge transport and recombination kinetics in each layer of a Ni-TiO 2 -Si junction is measured using the element specificity of broadband extreme ultraviolet (XUV) ultrafast pulses. After silicon photoexcitation, holes are inferred to transport from Si to Ni ballistically in ~100 fs, resulting in characteristic spectral shifts in the XUV edges. Meanwhile, the electrons remain on Si. After picoseconds, the transient hole population on Ni is observed to back-diffuse through the TiO 2 , shifting the Ti spectrum to a higher oxidation state, followed by electron-hole recombination at the Si-TiO 2 interface and in the Si bulk. Electrical properties, such as the hole diffusion constant in TiO 2 and the initial hole mobility in Si, are fit from these transient spectra and match well with values reported previously.

42 ENGINEERING↗
DOE OSTI2022

In situ ion irradiation of amorphous TiO 2 nanotubes

Understanding of structural and morphological evolution in nanomaterials is critical in tailoring their functionality for applications such as energy conversion and storage. Here, we examine irradiation effects on the morphology and structure of amorphous TiO 2 nanotubes in comparison with their crystalline counterpart, anatase TiO 2 nanotubes, using high-resolution transmission electron microscopy (TEM), in situ ion irradiation TEM, and molecular dynamics (MD) simulations. Anatase TiO 2 nanotubes exhibit morphological and structural stability under irradiation due to their high concentration of grain boundaries and surfaces as defect sinks. On the other hand, amorphous TiO 2 nanotubes undergo irradiation-induced crystallization, with some tubes remaining only partially crystallized. The partially crystalline tubes bend due to internal stresses associated with densification during crystallization as suggested by MD calculations. Furthermore, these results present a novel irradiation-based pathway for potentially tuning structure and morphology of energy storage materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In situ EXAFS study of Sr adsorption on TiO 2 (110) under high ionic strength wastewater conditions

In order to provide important details concerning the adsorption reactions of Sr, batch reactions and a set of both ex situ and in situ Grazing Incidence X-ray Absorption Fine Structure (GIXAFS) adsorption experiments were completed on powdered TiO 2 and on rutile(110), both reacted with either SrCl 2 or SrCO 3 solutions. TiO 2 sorption capacity for strontium (Sr) ranges from 550 ppm (SrCl 2 solutions, second order kinetics) to 1400 ppm (SrCO 3 solutions, first order kinetics), respectively, and is rapid. Sr adsorption decreased as a function of chloride concentration but significantly increased as carbonate concentrations increased. In the presence of carbonate, the ability of TiO 2 to remove Sr from the solution increases by a factor of ~4 due to rapid epitaxial surface precipitation of an SrCO 3 thin film, which registers itself on the rutile(110) surface as a strontianite-like phase (d-spacing 2.8 Å). Extended X-ray Absorption Fine Structure (EXAFS) results suggest the initial attachment is via tetradental inner-sphere Sr adsorption. Moreover, adsorbates from concentrated SrCl 2 solutions contain carbonate and hydroxyl species, which results in both inner- and outer-sphere adsorbates and explains the reduced Sr adsorption in these systems. These results not only provide new insights into Sr kinetics and adsorption on TiO 2 but also provide valuable information concerning potential improvements in effluent water treatment models and are pertinent in developing treatment methods for rutile-coated structural materials within nuclear power plants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Constructing Co Cluster Sites for Selective CO 2 Hydrogenation via Phase Segregation from Co-Doped TiO 2 Nanocrystals

This article presents a Co phase segregation strategy for creating stable Co cluster catalytic sites on TiO 2 , enabling selective CO 2 hydrogenation to CO. Through oxidative calcination, pre-synthesized Co-doped brookite TiO 2 nanorods transform into a mixed TiO 2 phase, leading to the phase segregation of Co species. The resulting Co clusters, stabilized by strong Co-TiO 2 interactions during reductive CO 2 hydrogenation, effectively suppress the formation of larger nanoparticles. The undercoordinated sites of these clusters promote a high CO production rate with near-unit selectivity, contrasting with Co nanoparticles, which favor CH 4 formation under identical conditions. In-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis indicates that the weakened CO adsorption on Co clusters is key to their enhanced CO selectivity, highlighting this method as a promising approach for efficient CO 2 utilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Chromospheric activity and TiO bands in M giants

Low-resolution IUE spectra of 23 cool giant stars ranging from K3 through M6 have been used to examine chromospheric activity in late-type giants. Previous studies have suggested a decrease in the fractional flux, normalized to bolometric flux, of the Mg II resonance lines (an indicator of chromospheric activity) with effective temperature. Using more accurately determined effective temperatures, this decrease is confirmed and found to be more rapid than previously suggested. A strong correlation is found between relative TiO band strengths, as measured by the Wing TiO index, and the level of chromospheric activity, as measured by Mg II fluxes. Cool giants which have weak TiO bands relative to the mean TiO strengths for stars of similar color also have Mg II lines that are weaker than the mean. Changes in composition and in chromospheric activity as a consequence of aging are suggested as a possible origin of this interesting relation.

Steiman-Cameron, T. Y.↗
DOE OSTI2022

Acetone to isobutene conversion on Zn x Ti y O z : Effects of TiO 2 facet

In this study, liquid-phase chemical grafting method was used to graft Zn onto TiO 2 with preferentially exposed (1 0 1) or (0 0 1) facet. The obtained Zn x Ti y O z materials were characterized using various techniques (e.g., XRD, Raman, DRIFTS etc.) and evaluated for the acetone-to-isobutene reaction. It was found that over TiO 2 (0 0 1), both terminal and bridging hydroxyls were readily titrated by Zn deposition, whereas a substantial amount of bridging hydroxyls on TiO 2 (1 0 1) remained. Although dominant Zn-O-terminated surface was obtained on two Zn x Ti y O z samples, bridging hydroxyls with high H-D exchange reactivity were observed on Zn x Ti y O z (1 0 1) compared with Zn x Ti y O z (0 0 1). The bridging hydroxyls showing rapid proton transfer efficiently stabilizes a transition state of diacetone alcohol intramolecular rearrangement for isobutene production as opposed to the diacetone alcohol dehydration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electronic surface reconstruction of TiO 2 nanocrystals revealed by resonant inelastic x-ray scattering

The identification of lattice multiphases in TiO 2 nanocrystals is studied by high resolution transmission electron microscope and electron diffraction patterns. Based on the spectroscopic analysis using soft x-ray absorption and resonant inelastic soft x-ray scattering, it is believed that the oxygen vacancies at the interface exhibit structural distortion of the TiO$^{8-}_6$ cluster around the defect site as for the multiphase lattice. We elucidate that the extra 3d electrons nearby induce the inelastic scattering features with the excitation energy dependence owing to different energy relaxation processes, a characteristic of the electron-phonon coupling or the nature of the electron-hole pair at the intermediate state. The manifold dd excitations driven by the strong interaction between Ti-3d and O-2p electrons are noticeably rich, coexisting on both Ti and O sites. Finally, this sophisticated experiment can advance the perspective of nanocomposite TiO 2 for various interactions of surface Ti 3+ in applications of future devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

In Situ Scattering Studies of Superconducting Vacancy‐Ordered Monoclinic TiO Thin Films

Abstract The structural and transport properties of vacancy‐ordered monoclinic superconducting titanium oxide (TiO) thin films grown by molecular beam epitaxy are investigated. The evolution of the crystal structure during growth is monitored by in situ synchrotron X‐ray diffraction. Long‐range ordering of Ti and O vacancies in the disordered cubic phase stabilizes the vacancy‐ordered monoclinic TiO phase. The reduced structural disorder arising from vacancy‐ordering is correlated with a superconductor‐metal transition (SMT) in contrast to the superconductor‐insulator transition (SIT) observed in cubic TiO, orthorhombic Ti 2 O 3 , and the Magneli γ − Ti 3 O 5 and γ − Ti 4 O 7 phase. Magnetoresistance measurements for the SIT phases indicate superconducting fluctuations persisting in the normal phase. These results confirm the role of disorder related to Ti and O vacancies and structural inhomogeneity in determining the electronic properties of the normal state of titanium oxide‐based superconductors.

Baksi, Merve↗
DOE OSTI2022

Chrome-free qandilite (Mg 2 TiO 4 ) refractory aggregates: Role of titania source and evaluation of thermal expansion coefficient

As used chrome-based refractories may contain toxic Cr 6+ , the chrome-free Mg 2 TiO 4 phase is being considered which is known to improve hot strength and resistance to thermal shock and slag corrosion. As in situ Mg 2 TiO 4 formation generates porosity, preformed aggregates are desirable. Dilatometric studies revealed that when dead burned magnesia is combined with industrial anatase instead of rutile, it expanded less (1% versus 7.2%) and the reaction occurred earlier (965°C compared to 1120°C). After sintering at 1,600°C, rutile produced an aggregate with 3.8% open porosity, whereas anatase led to 0 % porosity and a bulk density of 3.24g/cm 3 with a thermal expansion coefficient (70–1,600°C) of 13.5×10 -6 K -1 . Moreover, replacing rutile by anatase eliminates the undesirable MgTiO 3 phase. The anatase-based aggregate consisted of a Mg 2 TiO 4 matrix with residual unreacted MgO and an intergranular, refractory CaTiO 3 phase. In conclusion, the rutile-based aggregate was deemed unsuitable due to a low-melting microstructure of forsterite contiguous with CaTiO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanisms of ion irradiation induced ordering in amorphous TiO 2 nanotubes: Effects of ion mass and energy

Here, amorphous TiO 2 nanotubes were irradiated in-situ in a transmission electron microscope (TEM) with Kr + ions at energies of 46 keV, 150 keV, and 1 MeV and with 46 keV Xe + ions, to investigate the structural and morphological evolution of the nanotubes under irradiation. At all irradiation conditions, amorphous TiO 2 nanotubes exhibited significant morphological instability, and tended to undergo volumetric swelling with increasing ion counts, often until collapse of the original nanotube structure. Molecular dynamics (MD) simulations confirmed that irradiation-induced defects can explain the observed swelling. Structurally, nanotubes remain amorphous following all Kr + irradiation conditions, but irradiation with 46 keV Xe + leads to the formation of anatase nanocrystallites. Importantly, through systematically varying ion energy and ion species, we try to elucidate the influence of nuclear and electronic stopping power on ion irradiation induced changes. By contextualizing these results within the existing literature, we propose that the observed changes in TiO 2 nanotube morphology and structure could be due to a competition between two mechanisms: (1) disorder-induced swelling and (2) irradiation-induced amorphous-to-crystalline transformation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structure and Stability of Pristine and Carboxylate-Covered Anatase TiO 2 (001) in Aqueous Environment

The interactions of carboxylic acids and water with TiO 2 surfaces are important in applications ranging from solar cells to biomedical devices. Here we focus on the aqueous interface with the minority (001) surface of anatase TiO 2 (A-001) and the behavior of adsorbed formic and acetic acid monolayers at this interface. We investigated the structure and stability of the pristine reconstructed and formic/acetic acid covered A-001 surfaces in contact with water using density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations. The (1 × 4) reconstruction of the pristine surface is found to be stable in aqueous environment, within the time scale of our simulation. Here, carboxylic acids adsorb in deprotonated bidentate (BD) form on A-001, with the dissociated proton transferred to a surface oxygen to form a bridging hydroxyl. Of the two possible configurations, BD bridging and BD straddling, of the adsorbed species, the latter is found to rapidly transform to a monodentate structure during our simulations. Further investigation of mixed acetate–formate monolayers on A-001 in water indicates that also BD bridging species can become unstable at the boundaries between formate and acetate-covered regions, transforming to a monodentate form that does not prevent water adsorption on the TiO 2 surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Visible Light Absorption and Hot Carrier Trapping in Anatase TiO 2 : The Role of Surface Oxygen Vacancies

Anatase TiO 2 is an efficient water splitting photocatalyst using UV light, but solar energy harvesting requires the presence of midgap states to increase visible light absorption. Despite numerous studies, important questions remain regarding the photophysics in O vacancy doped TiO 2 . Here, by employing extreme ultraviolet reflection–absorption (XUV-RA) spectroscopy at the Ti M2,3-edge, spectral signatures of both large and small polaron states are identified, allowing ultrafast electron and hole dynamics in these states to be independently resolved. Results show that visible light absorption occurs via promotion of an electron from the small polaron state to the TiO 2 conduction band. In contrast, absorption of UV light results in direct band gap excitation followed by carrier relaxation during which hot holes trap as small polarons in 45 ± 42 fs, and hot electrons couple to polar optical phonons leading to vibrational coherence and large polaron formation in 945 ± 92 fs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mixed Molecular and Dissociative Water Adsorption on Hydroxylated TiO 2 (110): An Infrared Spectroscopy and Ab Initio Molecular Dynamics Study

For this work, we have investigated the structure and dynamics of water (D 2 O) adsorbed on TiO 2 (110) for coverages between 0 and 1 monolayer with infrared reflection absorption spectroscopy (IRAS) and ab initio molecular dynamics (AIMD) simulations. For D 2 O coverages as low as 0.4 monolayers (ML) on a hydroxylated surface, IR spectra typical of hydrogen-bonded chains of water molecules are observed. However, for D 2 O coverages ≥ 0.3 ML, a sharp, high frequency peak is also observed in the p-polarized spectra that is red-shifted relative to the bridging hydroxyl peak. This new peak is not observed for water adsorbed on an oxidized surface. Based on the AIMD simulations and comparisons with previous IR spectra for TiO 2 nanoparticles, the new peak is assigned to terminal hydroxyl groups produced by dissociative adsorption of some of the water on TiO 2 (110). The simulations indicate that water dissociation is related to the presence of defect electrons in the system, but not due to direct interactions between adsorbed water and bridging hydroxyls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Energetics of Cu Adsorption on and Adhesion to Rutile-TiO 2 (100) Studied by Cu Vapor Adsorption Calorimetry

The heat of adsorption of Cu vapor versus coverage was measured on rutile-TiO 2 (100) at 300 and 100 K using single-crystal adsorption calorimetry. At these conditions, Cu nanoparticles nucleate and then grow larger. The average Cu particle size versus Cu coverage was measured using He + low-energy ion scattering spectroscopy. These data were analyzed with the recently introduced spherical cap model (SCM) to provide the heat of Cu adsorption and Cu chemical potential versus Cu particle size, as well as the contact angle (67°) and adhesion energy (2.50 J/m 2 ) at the Cu particle/rutile-TiO 2 (100) interface. The hemispherical cap model (HCM) was used to model the data first, and then those HCM results were converted to the more accurate SCM results using a recently published mathematical approximation whose high accuracy was validated here. Furthermore, the adhesion energy of Cu on rutile-TiO 2 (100) measured here is compared to prior values for Ag and Au on rutile-TiO 2 (100), showing a nearly proportional increase in adhesion energy with metal oxophilicity (per unit area).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗