Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermoelectric effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Manipulation of the van der Waals Magnet Cr 2 Ge 2 Te 6 by Spin–Orbit Torques

In this work, we report measurements of current-induced thermoelectric and spin-orbit torque effects within devices in which multilayers of the semiconducting 2-dimensional van der Waals magnet Cr 2 Ge 2 Te 6 (CGT) are integrated with Pt and Ta metal overlayers. We show that the magnetic orientation of the CGT can be detected accurately either electrically (using an anomalous Hall effect) or optically (using magnetic circular dichroism) with good consistency. The samples exhibit large thermoelectric effects, but nevertheless the spin-orbit torque can be measured quantitatively using the angle-dependent second harmonic Hall technique. For CGT/Pt we measure the spin-orbit torque efficiency to be similar to conventional metallic-ferromagnet/Pt devices with the same Pt resistivity. The interfacial transparency for spin currents is therefore similar in both classes of devices. Our results demonstrate the promise of incorporating semiconducting 2D magnets within spin-orbitronic and magneto-thermal devices.

2D magnets↗
NASA NTRS1990

Effect of neutron irradiation on the thermoelectric properties of SiGe alloys

Zone-leveled and hot-pressed n- and p-type Si80Ge20 alloys were irradiated with neutrons to a fluence of 4 x 1018 n/sq cm and to a fluence of 5.4 x 1019 n/sq cm at a temperature of approximately 200-300 C. The effect of neutron irradiation on the thermoelectric properties of these alloys was evaluated. The carrier concentration and mobility (and hence the resistivity) were measured at room temperature while the thermal diffusivity was measured at 177-192 C both before and after the irradiation and after each subsequent 2-h heat treatment at 350 C, 600, and 1000 C. The irradiation increased the resistivity significantly, but the thermal conductivity decreased only by about 10-15 percent. This tends to indicate that the radiation produced only small defects (single pairs and small vacancy chains). The samples all returned to almost exactly their preirradiation state after the 1000 C anneal. This indicates that SiGe alloys can be operated in this neutron fluence at high temperatures without a degradation of thermoelectric properties.

Vandersande, Jan W.↗
DOE OSTI2020

Modeling and Investigations on Surface Colors of Wings on the Performance of Albatross-Inspired Mars Drones and Thermoelectric Generation Capabilities

Thermal effects of wing color for Albatross-inspired drones performing in the Martian atmosphere are investigated during the summer and winter seasons. This study focuses on two useful consequences of the thermal effects of wing color: the drag reduction and the thermoelectric generation of power. According to its color, each wing side has a certain temperature affecting the drag. Investigations of various configurations have shown that the thermal effect on the wing boundary layer skin drag is insignificant because of the low atmospheric pressure. However, the total drag varies as much as 12.8% between the highest performing wing color configuration and the lowest performing configuration. Additionally, the large temperature differences between the top and the bottom wing surfaces show great potential for thermoelectric power generation. The maximum temperature differences between the top and bottom surfaces for the summer and winter seasons are, respectively, 65 K and 30 K. The drag reduction and the power generation via thermoelectric generators both contribute to enhancing the endurance of drones. Future drone designs will benefit from increased endurance through optimizing the wing color configuration.

Rice, Devyn↗
NASA NTRS2014

N-type Doped PbTe and PbSe Alloys for Thermoelectric Applications

The present invention demonstrates that weak scattering of carriers leads to a high mobility and therefore helps achieve low electric resistivity with high Seebeck coefficient for a thermoelectric material. The inventors demonstrate this effect by obtaining a thermoelectric figure of merit, zT, higher than 1.3 at high temperatures in n-type PbSe, because of the weak scattering of carriers in the conduction band as compared with that in the valence band. The invention further demonstrates favorable thermoelectric transport properties of n-type PbTe.sub.1-xI.sub.x with carrier concentrations ranging from 5.8.times.10.sup.18-1.4.times.10.sup.20 cm.sup.-3.

Snyder, G. Jeffrey↗
NASA NTRS2006

Using Thermoelectric Converters for Loop Heat Pipe Operating Temperature Control

This paper describes an experimental study to investigate the effectiveness of using thermoelectric converters (TECs) to control the loop heat pipe (LHP) operating temperature. Tests were conducted on an LHP having two evaporators and two condensers. Each evaporator has its own integral compensation chamber (CC). One side of the TEC is attached to the CC, and the other side is connected to the evaporator through a copper thermal strap. A bi-polar power supply is used to provide the power for the operation of each TEC. The bipolar supply will automatic change the direction of the current to the TEC depending on whether the CC requires heating or cooling in order to maintain its temperature at the desired set point. When cooling the CC, the heat pumped by the TEC plus the power needed to operate the TEC is dissipated to the evaporator, and is ultimately transmitted to the condenser. When heating the CC, the TEC can draw heat from the evaporator to supplement the required control heater power. Test results showed that the TEC could control the LHP operating temperature within h1K of the set point temperature. The control heater power required for TEC operation was also much less than that of using electrical heaters.

Ku, Jentung↗
DOE OSTI2023

Enhanced thermoelectric performance via quantum confinement in a metal oxide semiconductor field effect transistor for thermal management

Abstract The performance of thermoelectric devices is gauged by the dimensionless figure of merit $${{{{{\boldsymbol{ZT}}}}}}$$ ZT . Improving $${{{{{\boldsymbol{ZT}}}}}}$$ ZT has proven to be a formidable challenge given the interdependence of its constitutive quantities, namely Seebeck coefficient, electrical conductivity, thermal conductivity, and temperature. Here, we use quantum confinement to decouple Seebeck coefficient and electrical conductivity to demonstrate an order of magnitude quantum-based enhancement to the thermoelectric figure of merit $${{{{{\boldsymbol{ZT}}}}}}$$ ZT in complimentary metal-oxide-semiconductor field-effect transistors. While most quantum-based enhancement is done through physical confinement using two-dimensional materials, our approach uses electrical confinement. Because of this, our device is more robust than the two-dimensional materials currently used. We further articulate that improvement by as much as a factor of 50 could be achieved in a practical setting. Our approach further provides a path for monolithic integration of on-chip coolers and energy scavengers with virtually no deviation from the fabrication flow of standard electronics.

Oxandale, Samuel W. (ORCID:0000000207484066)↗
DOE OSTI2023

Ga 4 C-family crystals, a new generation of star thermoelectric materials, achieved by band degeneracies, valley anisotropy, and strong phonon scattering among others

Using density functional theory combined with the Boltzmann transport equation, we uncover a new class of high-performance thermoelectric materials, i.e., supertetrahedral Ga 4 C-family materials characterized by an ultrahigh thermoelectric figure of merit (ZT), which is produced both by a large power factor and ultralow lattice thermal conductivity. The former is contributed by multiple electronic band degeneracies, flat bands and valley anisotropy, while the latter is contributed both by strong phonon scattering and low phonon group velocity. Furthermore, we find that tensile strain engineering may further suppress lattice thermal conductivity, while well retaining the multi-band degeneracies, valley anisotropy and flat bands. In addition to the band degeneracy, the scattering mechanism of the system can also dominate the power factor in the process of strain implementation. Consequently, a novel thermoelectric phenomenon, i.e., a high thermoelectric figure of merit, is observed in Ca 4 C with a ZT value larger than 4.4 under a small strain ratio (0.75%). In conclusion, our theoretical studies not only uncover a new class of high-performance thermoelectric materials integrating multiple effective mechanisms, but also establish a realistic material plateau to investigate the competitive effect of multiple factors on enhancing the thermoelectric figure of merit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Large asymmetric anomalous Nernst effect in the antiferromagnet SrIr 0.8 Sn 0.2 O 3

A large anomalous Nernst effect is essential for thermoelectric energy-harvesting in the transverse geometry without external magnetic field. It's often connected with anomalous Hall effect, especially when electronic Berry curvature is believed to be the driving force. This approach implicitly assumes the same symmetry for the Nernst and Hall coefficients, which is however not necessarily true. Here we report a large anomalous Nernst effect in antiferromagnetic SrIr 0.8 Sn 0.2 O 3 that defies the antisymmetric constraint on the anomalous Hall effect imposed by the Onsager reciprocal relation. The observed spontaneous Nernst thermopower quickly reaches the sub-μV/K level below the Néel transition around 250 K, which is comparable with many topological antiferromagnetic semimetals and far excels other magnetic oxides. Our analysis indicates that the coexistence of significant symmetric and antisymmetric contributions plays a key role, pointing to the importance of extracting both contributions and a new pathway to enhanced anomalous Nernst effect for transverse thermoelectrics.

Hall effect↗
DOE OSTI2024

Thermomagnetic responses of semimetals

Solid-state thermomagnetic modules operating based on the Nernst–Ettingshausen effects are an alternative to conventional solid-state thermoelectric modules. These modules are appropriate for low-temperature applications where the thermoelectric modules are not efficient. Here, we briefly discuss the application, performance, similarities, and differences of thermoelectric and thermomagnetic materials and modules. We review thermomagnetic module design, Nernst coefficient measurement techniques, and theoretical advances, emphasizing the Nernst effect and factors influencing its response in semimetals such as carrier compensation, Fermi surface, mobility, phonon drag, and Berry curvature. The main objective is to summarize the materials design criteria to achieve high thermomagnetic performance to accelerate thermomagnetic materials discovery.

42 ENGINEERING↗
DOE OSTI2021

Implications of doping on microstructure, processing, and thermoelectric performance: The case of PbSe

Abstract In this work, we highlight the often-overlooked effects of doping on the microstructure and performance of bulk thermoelectric materials to offer a broader perspective on how dopants interact with their parent material. Using PbSe doped with Na, Ag, and K as a model material system, we combine original computational, experimental, and microscopy data with established trends in material behavior, to provide an in-depth discussion of the relationship between dopants, processing, and microstructure, and their effects on thermoelectric efficiency and thermal stability. Notable observations include differences in the microstructure and mass loss of thermally treated samples of Na- and Ag-doped PbSe, as well as findings that Na and K cations exist predominantly as substitutional point defects while Ag also occupies interstitial sites and exhibits lower solubility. We discuss how these differences in point defect populations are known to affect a dopants’ ability to alter carrier concentration and how they may affect the mechanical properties of PbSe during processing. Graphic Abstract

Grovogui, Jann A. (ORCID:0000000200481049)↗
DOE OSTI2021

Correlating conductivity and Seebeck coefficient to doping within crystalline and amorphous domains in poly(3-(methoxyethoxyethoxy)thiophene)

Molecular doping of conjugated polymers (CPs) plays a vital role in optimizing organic electronic and energy applications. For the case of organic thermoelectrics, it is commonly believed that doping CPs with a strong dopant could result in higher conductivity (σ) and thus better power factor (PF). Herein, by investigating thermoelectric performance of a polar side-chain bearing CP, poly(3- (methoxyethoxyethoxy)thiophene) (P3MEET), vapor doped with fluorinatedderivative of tetracyanoquinodimethane FnTCNQ (n = 1, 2, 4), we show that using strong dopants can in fact have detrimental effects on the thermoelectric performance of CPs. Despite possessing higher electron affinity, doping P3MEET with F4TCNQ only results in a σ (27.0 S/cm) comparable to samples doped with other two weaker dopants F2TCNQ and F1TCNQ (26.4 and 20.1 S/cm). Interestingly, F4TCNQ-doped samples display a marked reduction in the Seebeck coefficient (α) compared to F1TCNQ- and F2TCNQ-doped samples from 42 to 13 μV/ K, leading to an undesirable suppression of the PF. Additionally, structural characterizations coupled with Kang-Snyder modeling of the α–σ relation show that the reduction of α in F4TCNQ-doped P3MEET samples originates from the generation of low mobility carrier within P3MEET's amorphous domain. Our results demonstrate that factors such as dopant distribution and doping efficiency within the crystalline and amorphous domains of CPs should play a crucial role in advancing rational design for organic thermoelectrics.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Effect of high temperature annealing on the thermoelectric properties of GaP doped SiGe

Silicon-germanium alloys doped with GaP are used for thermoelectric energy conversion in the temperature range 300-1000 C. The conversion efficiency depends on Z = S-squared/rho lambda, a material's parameter (the figure of merit), where S is the Seebeck coefficient, rho is the electrical resistivity and lambda is the thermal conductivity. The annealing of several samples in the temperature range of 1100-1300 C resulted in the power factor P (= S-squared/rho) increasing with increased annealing temperature. This increase in P was due to a decrease in rho which was not completely offset by a drop in S-squared suggesting that other changes besides that in the carrier concentration took place. SEM and EDX analysis of the samples indicated the formation of a Ga-P-Ge rich phase as a result of the annealing. It is speculated that this phase is associated with the improved properties. Several reasons which could account for the improvement in the power factor of annealed GaP doped SiGe are given.

Vandersande, Jan W.↗
NASA NTRS1991

Effect of small scattering centers on the thermoelectric properties of p-type SiGe alloys

Theory predicts that the addition of ultra-fine, inert, phonon-scattering centers to thermoelectric materials will reduce their thermal conductivity. To investigate this prediction, ultrafine particulates (20 to 120 A) of silicon nitride have been added to boron-doped, p-type, 80/20 SiGe. All of the SiGe samples produced from ultrafine powder have lower thermal conductivities than standard SiGe, but high-temperature heat treatment increases the thermal conductivity back to the value for standard SiGe. However, the SiGe samples with silicon nitride, inert, phonon-scattering centers retained the lower thermal conductivity after several heat treatments. A reduction of approximately 25 percent in thermal conductivity has been achieved in these samples. The magnitude of the reduction agrees with theoretical predictions.

Beaty, John S.↗
NASA NTRS2009

Thermoelectric Devices Cool, Power Electronics

Nextreme Thermal Solutions Inc., based in Research Triangle Park, North Carolina, licensed thermoelectric technology from NASA s Jet Propulsion Laboratory. This has allowed the company to develop cutting edge, thin-film thermoelectric coolers that effective remove heat generated by increasingly powerful and tightly packed microchip components. These solid-state coolers are ideal solutions for applications like microprocessors, laser diodes, LEDs, and even potentially for cooling the human body. Nextreme s NASA technology has also enabled the invention of thermoelectric generators capable of powering technologies like medical implants and wireless sensor networks.

Source record↗
DOE OSTI2022

Synthesis of poly(3,4-ethylenedioxythuophene) derivatives using three-armed conjugated cross-linker and its thermoelectric properties

Conducting polymer based thermoelectric systems are very effective at harvesting electricity from waste heat with low-temperature gradients relative to environmental temperature. However, although various studies concerning the doping effect exist, there are insufficient reports on the effect of the change in polymer chain structure on the thermoelectric properties. Here we demonstrate different poly(3,4-ethylenedioxythiophene) (PEDOT)-derivative chain structures (such as linear, two-dimensional, co-polymer), by varying the amount of three-armed conjugated cross-linker (1,3,5-tri(2-thienyl)-benzene (TTB)). Further, at a small amount of TTB addition (until 0.5 mM), the electrochemical charge transport of the PEDOT films increased without shift of the UV–Vis absorbing property. However, from higher than 0.5 mM TTB, electrochemical charge transport decreased with blue shift of the UV–Vis absorbing curve. Moreover, the power factor of the PEDOT-derivative films without TTB to a small amount of TTB (0.5 mM) was improved from (27.03 to 49.43) µWm -1 K -2 , and at higher than 0.5 mM TTB concentration, was diminished, respectively, because a small amount of TTB enhanced the π–π interaction of the polymer chains without disrupting the conjugation, while excess TTB molecules blocked conjugation of the polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Sublimation measurements and analysis of high temperature thermoelectric materials and devices

High temperature thermoelectric device sublimation effects are compared for rare earth sulfides, selenides, and state-of-the-art Si-Ge alloys. Although rare earth calcogenides can potentially exhibit superior sublimation characteristics, the state-of-the-art Si-Ge alloy with silicon nitride sublimation-inhibitive coating has been tested to 1000 C. Attention is given to the ceramic electrolyte cells, forming within electrical and thermal insulation, which affect leakage conductance measurements in Si-Ge thermoelectric generators.

Shields, V.↗
NASA NTRS1990

Electronic state and superconductivity of YBa2Cu3-xO7-y (M=Al,Zn and Sn) systems

A series of YBa2Cu(3-x)MxO(7-y) (M=Al,Zn and Sn) single phase samples were prepared, and the measurements of the crystal structure, oxygen content, electric resistivity, thermoelectric power, Mossbauer spectrum, XPS and superconductivity were performed. The experimental results of X ray powder diffraction, Mossbauer spectrum and oxygen content show that the Zn(2+) and the Al(3+) occupy the Cu(2) site in Cu-O planes and the Cu(1) site in Cu-O chains respectively, but the Sn(4+) occupies both the Cu(1) sites. As regards the properties in superconducting state, both the Zn(2+) and the Al(3+) depress T(sub c) strongly, but the Sn(4+) does not. As for the electronic transport properties in normal state, the system doped by Al(3+) displays a rapid increase of resistivity and some electron localization-like effects, and the thermoelectric power enhances obviously; the series contained Zn(2+) almost shows no changes of electric resistivity but the sign of the thermoelectric power is reversed. Other results are given and briefly discussed.

Zhao, Y.↗