Study of thermal isolation techniques Final engineering report
Thermal isolation techniques for protection of temperature sensitive materials and components in spacecraft instruments and equipment during terminal heat sterilization cycle
ISOLATION↗
SEARCH · Engineering Papers
Results for “Thermal Engineering”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thermal Orbital Environmental Parameter Study on the Propulsive Small Expendable Deployer System (ProSEDS) Using Earth Radiation Budget Experiment (ERBE) Data
The natural thermal environmental parameters used on the Space Station Program (SSP 30425) were generated by the Space Environmental Effects Branch at NASA's Marshall Space Flight Center (MSFC) utilizing extensive data from the Earth Radiation Budget Experiment (ERBE), a series of satellites which measured low earth orbit (LEO) albedo and outgoing long-wave radiation. Later, this temporal data was presented as a function of averaging times and orbital inclination for use by thermal engineers in NASA Technical Memorandum TM 4527. The data was not presented in a fashion readily usable by thermal engineering modeling tools and required knowledge of the thermal time constants and infrared versus solar spectrum sensitivity of the hardware being analyzed to be used properly. Another TM was recently issued as a guideline for utilizing these environments (NASA/TM-2001-211221) with more insight into the utilization by thermal analysts. This paper gives a top-level overview of the environmental parameters presented in the TM and a study of the effects of implementing these environments on an ongoing MSFC project, the Propulsive Small Expendable Deployer System (ProSEDS), compared to conventional orbital parameters that had been historically used.
Sharp, John R.↗
Spacecraft Window Design from a Thermal Perspective
This paper gives a rudimentary introduction to spacecraft window design from a thermal engineering perspective. Windows have always been integral parts of all of NASA’s flown, crewed spacecraft missions and will continue to be included on future crewed vehicles. They are part of the primary structure and require high structural reliability. Often neglected by non-thermal engineers, there are important thermal impacts to including windows on a spacecraft design. Thermal radiation from the sun, planetary bodies, or other vehicles can enter the vehicle and heat the interior. Windows can also be heat leaks to space during cold operations. Windows may also serve as part of the vehicle Thermal Protection System for entry vehicles. Like all other parts of the spacecraft, windows must be included in thermal models to predict temperatures; the transparency of pane materials and the addition of coatings increase modeling complexity. Testing of windows is also more complex than typical spacecraft structure due to the uniqueness of each pane (depending on material), transmittance, and the challenge of physically measuring window material temperature during testing.
Cheyn L Worn↗
Spacecraft Window Design From A Thermal Perspective
This paper gives a rudimentary introduction to spacecraft window design from a thermal engineering perspective. Windows have always been integral parts of all of NASA’s flown, crewed spacecraft missions and will continue to be included on future crewed vehicles. They are part of the primary structure and require high structural reliability. Often neglected by non-thermal engineers, there are important thermal impacts to including windows on a spacecraft design. Thermal radiation from the sun, planetary bodies, or other vehicles can enter the vehicle and heat the interior. Windows can also be heat leaks to space during cold operations. Windows may also serve as part of the vehicle Thermal Protection System for entry vehicles. Like all other parts of the spacecraft, windows must be included in thermal models to predict temperatures; the transparency of pane materials and the addition of coatings increase modeling complexity. Testing of windows is also more complex than typical spacecraft structure due to the uniqueness of each pane (depending on material), transmittance, and the challenge of physically measuring window material temperature during testing.
Thermal↗
Intelligent Engine Systems: Thermal Management and Advanced Cooling
The objective is to provide turbine-cooling technologies to meet Propulsion 21 goals related to engine fuel burn, emissions, safety, and reliability. Specifically, the GE Aviation (GEA) Advanced Turbine Cooling and Thermal Management program seeks to develop advanced cooling and flow distribution methods for HP turbines, while achieving a substantial reduction in total cooling flow and assuring acceptable turbine component safety and reliability. Enhanced cooling techniques, such as fluidic devices, controlled-vortex cooling, and directed impingement jets, offer the opportunity to incorporate both active and passive schemes. Coolant heat transfer enhancement also can be achieved from advanced designs that incorporate multi-disciplinary optimization of external film and internal cooling passage geometry.
Bergholz, Robert↗
The design and operating characteristics of a 30-kW thermal arcjet engine for space propulsion
Attention is given to the design features of a radiation-cooled, 30-kW thermal arcjet thruster, whose laboratory tests have yielded specific impulses of up to 935 sec at 36-44 percent thrust efficiency, together with a cumulative lifetime of over 400 hours. All materials used, including seals, can sustain operation at temperatures sufficiently elevated to require the radiation of all waste heat. This electric propulsion system is ideally suited to missions such as the Space-Based Radar. A detailed consideration is conducted for the thruster's seals, which are the most critical element of the design.
Pivirotto, T.↗
MODELING AND OPTIMIZATION OF A PCM-BASED OCEAN THERMAL ENERGY HARVESTER FOR POWERING UNMANNED UNDERWATER VEHICLES
As oceans cover over 70% of the planet’s surface, they represent a large reservoir of resources that remained vastly untapped. Uncrewed Underwater Vehicles (UUVs) are becoming key technology for ocean exploration. Ocean thermal gradient is a permanent and reliable energy source that can be used to power UUVs using phase change material (PCM)-based thermal engines. However, the main drawback of this technology is its low conversion efficiency. When using PCM-based thermal engines to power UUVs, there are different energy conversion stages, thermal-hydraulic, hydraulic-kinetic, kinetic-electrical, dependent of a wide variety of parameters. Thus, optimization of the overall energy conversion is still a challenge for powering the increasing energy demanding UUVs for long missions. The goal of this study is to propose a PCM-based ocean thermal energy harvesting system for powering the Solo II float. Using the ocean thermal energy reduces the cost for battery replacement and expands the float’s mission time. For this purpose, we developed a multiphysics model for a system consisting of thermal material, hydraulic, and electrical systems. This system is designed to provide the electrical power needed for the instruments aboard the underwater vehicle. The models of the hydraulic and the electric systems are implemented in MATLAB-Simulink/Simscape environment. The final model developed can provide 13.66 kJ of electrical energy, which is more than 1.5 times the energy requirement per cycle for the SOLO II float.
Ouro-Koura, Habilou↗
Cryogenic Fluid Management Technology and Nuclear Thermal Propulsion
Cryogenic fluid management (CFM) is critical to the success of future nuclear thermal propulsion powered vehicles. While this is an issue for any propulsion system utilizing cryogenic propellants, this is made more challenging by the radiation flux produced by the reactor in a nuclear thermal rocket (NTR). Managing the cryogenic fuel to prevent propellant loss to boil off and leakage is needed to limit the required quantity of propellant to a reasonable level. Analysis shows deposition of energy into liquid hydrogen fuel tanks in the vicinity of the nuclear thermal engine. This is on top of ambient environment sources of heat. Investments in cryogenic/thermal management systems (some of which are ongoing at various organizations) are needed in parallel to nuclear thermal engine development in order to one day see the successful operation of an entire stage. High durability, low thermal conductivity insulation is one developmental need. Light weight cryocoolers capable of removing heat from large fluid volumes at temperatures as low as approx. 20 K are needed to remove heat leak from the propellant of an NTR. Valve leakage is an additional CFM issue of great importance. Leakage rates of state of the art, launch vehicle size valves (which is approximately the size valves needed for a Mars transfer vehicle) are quite high and would result in large quantities of lost propellant over a long duration mission. Additionally, the liquid acquisition system inside the propellant tank must deliver properly conditioned propellant to the feed line for successful engine operation and avoid intake of warm or gaseous propellant. Analysis of the thermal environment and the CFM technology development are discussed in the accompanying presentation.
Taylor, Brian D.↗
The use of low power dual mode nuclear thermal rocket engines to support space exploration missions
The evolution of dual mode concepts is presented, focusing on advantages and problems associated with both low and high temperature dual mode conversion systems. It is concluded that dual mode nuclear thermal rocket (NTR) systems using high temperature Brayton cycle conversion technology offer a high payoff enhancement of conventional NTR, with a comparatively minor increase of technological challenge. It is recommended that NTR engines be designed so that dual mode conversion systems can be attached to them in a modular way, thus enabling the production of electric power on all missions where it is needed.
Zubrin, Robert M.↗
Effect of Nuclear Thermal Propulsion Engine Thrust and Isp Tradeoffs and Alternate Propellants on ΔV Budget and Architecture Mass for Crewed Mars Vehicles
This paper will provide an overview of a spacecraft architecture model developed at AMA as well as an insight into some of the results provided. Currently, preliminary analysis has been completed with this model on evaluating different thrust to weight ratios of Nuclear Thermal Propulsion based vehicles using hydrogen as the propellant by altering the number of engines in the engine block. Gravity losses are incorporated into this analysis as different thrust to weight ratios will provide different burn times. So far, this analysis has shown that in terms of the vehicle mass, it is best to trade the gravity losses for lower vehicle mass as the engines considered add significant dry mass to the vehicle. The final version of this paper will compare gravity losses and vehicle masses for vehicles using different engine masses as well as the ammonia propellant.
Master equipment list↗
NASA’s Quiet Electric ENgines (QUEEN): Thermal Analysis and Testing of the Electronic Speed Controller (ESC)
An electric ducted fan system was tested at the NASA Glenn Research Center. Main components of the system include a commercial-off-the-Shelf (COTS) fan and motor, electronic speed controller, and cooling system. Motor speed, voltage, current, and temperatures were measured in this static ground test of the propulsor. The thermal performance of the Electronic Speed Controller (ESC) was also measured using two different methods to cool the ESC: air cooling and cold plate cooling. This propulsor prototype is one of NASA’s Quiet Electric ENgines (QUEENs) and is designated the ‘QUEEN V1.’ The Quiet Electric Engines are being developed for the 25% scale model of the Subsonic Single Aft Engine (SUSAN) Flight Research Vehicle and are intended to explore the potential of distributed electric propulsion for large regional single-aisle aircraft. Lessons learned will be used to guide development of future QUEEN prototypes and thermal management systems.
Firas G Asfoor↗
TSS-Thermal Synthesizer System
Thermal Synthesizer System (TSS) is integrated set of thermal-analysis application programs designed to solve problems encountered by thermal engineers. Combines functionality of Systems Improved Numerical Differencing Analyzer/Fluid Integrator (SINDA/FLUINT) and radiation analysis with friendly and easily understood user-interface environment coupled with powerful interactive color graphics and geometric modeling capability. Enables thermal engineers to spend more time solving engineering problems instead of laboriously constructing and verifying math models. Written in FORTRAN and C language.
Chimenti, Edward↗
Intelligent Engine Systems: Thermal Management and Advanced Cooling
The objective of the Advanced Turbine Cooling and Thermal Management program is to develop intelligent control and distribution methods for turbine cooling, while achieving a reduction in total cooling flow and assuring acceptable turbine component safety and reliability. The program also will develop embedded sensor technologies and cooling system models for real-time engine diagnostics and health management. Both active and passive control strategies will be investigated that include the capability of intelligent modulation of flow quantities, pressures, and temperatures both within the supply system and at the turbine component level. Thermal management system concepts were studied, with a goal of reducing HPT blade cooling air supply temperature. An assessment will be made of the use of this air by the active clearance control system as well. Turbine component cooling designs incorporating advanced, high-effectiveness cooling features, will be evaluated. Turbine cooling flow control concepts will be studied at the cooling system level and the component level. Specific cooling features or sub-elements of an advanced HPT blade cooling design will be downselected for core fabrication and casting demonstrations.
Bergholz, Robert↗
Rapid Development of Instrument Thermal Models: Perspectives and Guidelines from NASA Goddard’s Instrument Design Laboratory
- The design and development of robotic spaceflight instruments is a critical part of NASA’s vision to discover and expand knowledge for the benefit of humanity - For typical flight instrument projects, thermal engineers will develop initial instrument thermal models over weeks or months, then iterate them over a project’s lifespan – In each iteration, the engineer will: - Refine their thermal models and thermal designs in accordance with updates from other subsystems - Perform trade studies - Solve very detailed and complex analysis problems, including worst-cases and contingencies - Pick hardware and plan for testing and integration - However, prior to a project being established, or for proposal development at an early conceptual stage, the luxury of multiple instrument design iterations may be limited or nonexistent – Within a short timeline, how do you complete a thermal model or explore multiple possible instrument configurations? – What are the critical parameters for your model? Which details do you include or leave out?
Kan Yang↗
What’s Going on with Compact Fuel Element Environmental Test (CFEET)
Recently, space nuclear propulsion has again become a concept of high interest for deep space missions. A nuclear thermal engine can offer numerous benefits including the option of a mission abort along with shorter transit times for crewed missions. The compact fuel element environment test (CFEET) facility was first introduced in 2012 as a low cost alternative to the Nuclear Thermal Rocket Element Environmental Simulator (NTREES) where materials of interest are exposed to prototypical conditions inside a nuclear thermal engine, including elevated temperatures in the presence of a hydrogen flow. CFEET has become a reliable and recognizable instrument to test the survivability of potential fuel material under hot hydrogen at high temperatures. The furnace has undergone several changes and improvements over the last years. This presentation will focus on new upgrades to improve the processing conditions, temperature measurement accuracy, and to qualify CFEET for reaching temperatures of up to 2900K.
Jamelle K.P. Williams↗
Plasma Electrolytic Oxidation (PEO) Coatings as Superior Thermal Barriers for Engine Pistons. Final Report
Thermal barrier coatings (TBCs) have received considerable interest in internal combustion engines, as a means to increase overall efficiency. However, despite some promising results for coatings with adequate thermal properties, durability has remained a barrier to commercialization, which has damped interest from automotive manufacturers. The PEO-based TBC developed by IBC Materials has exceptional durability, and thermal properties comparable or superior to state of the art. In this Phase I effort, IBC has demonstrated this durability by coating pistons from a current production engine (Kohler KD440) and conducting thermal shock testing on several coated pistons. Following successful thermal shock testing, a piston was run in this engine for an extended period(>120h) and showed no evidence of damage to the piston coating or engine bore. The PEO-based TBC also increased heat rejection from the combustion chamber, resulting in significantly increased exhaust temperature. Operation of the engine with PEO-based TBCs was also found to delay the onset of fuel ignition, possibly due to reduced heat retention by the piston. After slightly modifying the engine operation to counteract this effect, a modest improvement (+0.8%) to overall efficiency was achieved. With additional tuning of coating parameters and combustion timing, it is very likely that additional gains can be realized. This result also points to the possibility of future designs which require less capacity from the cooling system (e.g. a radiator), which draws energy and adds mass and complexity to an overall powertrain.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
SENSITIVITY ANALYSIS OF FUEL PHYSICAL PROPERTY EFFECTS ON SPARK IGNITION ENGINE PERFORMANCE
Alternative fuels are of interest to automakers and regulators due to their potential to reduce net greenhouse gas emissions from transportation sources. Alternative fuels also have fuel properties which may enable advanced combustion modes with higher engine thermal efficiencies. There has been previous work to identify the relationship between various fuel properties and engine performance, but most of this work has been experiments or simulations where the change in properties was obtained through changing the fuel composition, making isolating the effects of individual fuel properties difficult. In this study, numerical simulations have been used to investigate the effects of individual fuel physical properties such as viscosity or heat of vaporization (HoV) on engine performance. Simulations have been performed of two different engine platforms, the first an optical, single-cylinder research engine and the second a multi-cylinder production engine. Both engines are direct-injection spark-ignition engines with pent-roof heads and are designed for automotive applications. Each engine was run at a different operating condition, one stable and one knock-limited. Different base fuels provided a variety of simulated conditions. Up to six different fuel properties were varied as part of Global Sensitivity Analyses performed for each of the engines with multiple performance targets including thermal efficiency, combustion efficiency and combustion phasing. Results show trends that are largely consistent with previous experimental findings using multiple fuels. The engine thermal efficiency was primarily sensitive to the fuel's HoV, with other fuel physical properties having smaller effects. For optical engine results, the magnitude of the effect was greater in this study than expected based on previous experimental results were many fuel physical and chemical properties were varied simultaneously. However, for the multi-cylinder production engine, the relationship between thermal efficiency and HoV was slightly smaller.
engine simulation↗
Ferroelectric Domain Wall Engineering Enables Thermal Modulation in PMN–PT Single Crystals
Acting like thermal resistances, ferroelectric domain walls can be manipulated to realize dynamic modulation of thermal conductivity ( k ), which is essential for developing novel phononic circuits. Despite the interest, little attention has been paid to achieving room-temperature thermal modulation in bulk materials due to challenges in obtaining a high thermal conductivity switching ratio ( k high / k low ), particularly in commercially viable materials. Here, room-temperature thermal modulation in 2.5 mm-thick Pb(Mg 1/3 Nb 2/3 )O 3 – x PbTiO 3 (PMN– x PT) single crystals is demonstrated. With the use of advanced poling conditions, assisted by the systematic study on composition and orientation dependence of PMN– x PT, a range of thermal conductivity switching ratios with a maximum of ≈1.27 is observed. Further, simultaneous measurements of piezoelectric coefficient (d 33 ) to characterize the poling state, domain wall density using polarized light microscopy (PLM), and birefringence change using quantitative PLM reveal that compared to the unpoled state, the domain wall density at intermediate poling states (0< d 33 33,max ) is lower due to the enlargement in domain size. At optimized poling conditions (d 33,max ), the domain sizes show increased inhomogeneity that leads to enhancement in the domain wall density. This work highlights the potential of commercially available PMN– x PT single crystals among other relaxor-ferroelectrics for achieving temperature control in solid-state devices.
36 MATERIALS SCIENCE↗