Space environment simulator test program. Volume 2 - Unmanned thermal performance evaluation of a Gemini extravehicular space suit Test report, May 1965
Temperature data plots of Gemini Bravo series space suit tests
Copeland, R. J.↗
SEARCH · Engineering Papers
Results for “Test Data Report”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Deformation and Failure of a Multi-Wall Carbon Nanotube Yarn Composite
Forests of multi-walled carbon nanotubes can be twisted and manipulated into continuous fibers or yarns that exhibit many of the characteristics of traditional textiles. Macro-scale analysis and test may provide strength and stiffness predictions for a composite composed of a polymer matrix and low-volume fraction yarns. However, due to the nano-scale of the carbon nanotubes, it is desirable to use atomistic calculations to consider tube-tube interactions and the influence of simulated twist on the effective friction coefficient. This paper reports laboratory test data on the mechanical response of a multi-walled, carbon nanotube yarn/polymer composite from both dynamic and quasi-static tensile tests. Macroscale and nano-scale analysis methods are explored and used to define some of the key structure-property relationships. The measured influence of hot-wet aging on the tensile properties is also reported.
Gates, Thomas S.↗
Effect of surface irregularities on bellows fatigue life
Report presents test data on the bending fatigue life of notched sheet specimens. The influence of a surface irregularity on the fatigue life of a metal bellows is evaluated, with emphasis on accidental defects in ducting bellows which are impossible to avoid short of completely eliminating human contact.
Schmidt, E. H.↗
Maximum likelihood identification and optimal input design for identifying aircraft stability and control derivatives
A new method of extracting aircraft stability and control derivatives from flight test data is developed based on the maximum likelihood cirterion. It is shown that this new method is capable of processing data from both linear and nonlinear models, both with and without process noise and includes output error and equation error methods as special cases. The first application of this method to flight test data is reported for lateral maneuvers of the HL-10 and M2/F3 lifting bodies, including the extraction of stability and control derivatives in the presence of wind gusts. All the problems encountered in this identification study are discussed. Several different methods (including a priori weighting, parameter fixing and constrained parameter values) for dealing with identifiability and uniqueness problems are introduced and the results given. The method for the design of optimal inputs for identifying the parameters of linear dynamic systems is also given. The criterion used for the optimization is the sensitivity of the system output to the unknown parameters. Several simple examples are first given and then the results of an extensive stability and control dervative identification simulation for a C-8 aircraft are detailed.
Stepner, D. E.↗
High intensity copper atom beam - Preliminary results
The development of a nozzle which gas-dynamically accelerates neutral copper atoms at controlled energy levels and flux rates suitable for the investigation of inelastic copper atom collision processes is reported. Preliminary test data demonstrate that vapor-deposited rhenium nozzles do not degrade in the presence of copper vapor at high temperatures. Operation with high purity helium gas at nozzle stagnation temperatures in the range 2650-2700 K and total stagnation pressures from 1/4 to 2 atm with continuous copper atom flux rates of approximately 10 to the 18th power per second has been maintained, for a total time of 8-1/2 h to date.
Kelly, A. J.↗
Design, Fabrication and Test of Multi-Fiber Laminates
Unidirectional and angleply multifiber laminates were tested for improved impact strength and other mechanical properties. The effects of several variables on the mechanical properties of epoxy matrix materials were described. These include fiber type (HMS and AS graphites, glass, and Kevlar 49), ratio of primary to hybridizing fiber and hybrid configuration. It is demonstrated that AS graphite/S glass in an intraply configuration results in the best combination of static and Charpy impact properties as well as superior ballistic impact resistance. Pendulum impact tests which were conducted on thin specimens are shown to produce different ranking of materials than tests conducted on standard thickness Charpy specimens. It is shown that the thin specimen results are in better agreement with the ballistic impact data. Additional static test data are reported as a function of temperature for the seven best hybrid configurations having epoxy, polyimide (PMR-15) and polyphenylquinoxaline resins as the matrix.
Pike, R. A.↗
Track/train dynamics test report transfer function test. Volume 2: Data book, y-axis tests, actuators 180 deg out of phase. Runs: 6, 9, 13, 14 and 23
Graphical data are presented on the Y-axis transfer function tests. For Volume 1, see .
Source record↗
Track/train dynamics test report transfer function test. Volume 3: Data book, y-axis tests, actuators in phase. Runs: 15, 18, 19 and 20
Graphical data are presented on the Y-axis transfer function tests. For Volume 1, see .
Source record↗
Track/train dynamics test report transfer function test. Volume 4: Data book, x-axis tests, actuators 180 deg out of phase. Run 30. z-axis tests, single actuator. Run 46
Graphical data are presented on the X-axis transfer function tests. For Volume 1, see .
Source record↗
Pyrotechnic shock measurement and data analysis requirements
A study of laboratory measurement and analysis of pyrotechnic shock prompted by a discrepancy in preliminary Mariner Jupiter/Saturn shock test data is reported. It is shown that before generating shock response plots from any recorded pyrotechnic event, a complete review of each instrumentation and analysis system must be made. In addition, the frequency response capability of the tape recorder used should be as high as possible; the discrepancies in the above data were due to inadequate frequency response in the FM tape recorders. The slew rate of all conditioning amplifiers and input converters must be high enough to prevent signal distortion at maximum input voltage; amplifier ranges should be selected so that the input pulse is approximately 50% of full scale; the Bessel response type should be chosen for digital shock analysis if antialiasing filters are employed; and transducer selection must consider maximum acceleration limit, mounted resonance frequency, flat clean mounting surfaces, base bending sensitivity, and proper torque.
Albers, L.↗
Viking lander camera geometry calibration report. Volume 1: Test methods and data reduction techniques
The determination and removal of instrument signature from Viking Lander camera geometric data are described. All tests conducted as well as a listing of the final database (calibration constants) used to remove instrument signature from Viking Lander flight images are included. The theory of the geometric aberrations inherent in the Viking Lander camera is explored.
Wolf, M. B.↗
Indoor test for the thermal performance evaluation of the DEC 8A large manifold sunmaster evacuated tube (liquid) solar collector
The Sunmaster DEC 8A Large Manifold solar collector using simulated conditions was evaluated. The collector provided 17.17 square feet of gross collector area. Test conditions, test requirements, an analysis of results, and tables of test data are reported.
Source record↗
Photovoltaic-Powered Vaccine Refrigerator: Freezer Systems Field Test Results
A project to develop and field test photovoltaic-powered refrigerator/freezers suitable for vaccine storage was undertaken. Three refrigerator/freezers were qualified; one by Solar Power Corp. and two by Solvolt. Follow-on contracts were awarded for 19 field test systems and for 10 field test systems. A total of 29 systems were installed in 24 countries between October 1981 and October 1984. The project, systems descriptions, installation experiences, performance data for the 22 systems for which field test data was reported, an operational reliability summary, and recommendations relative to system designs and future use of such systems are explained. Performance data indicate that the systems are highly reliable and are capable of maintaining proper vaccine storage temperatures in a wide range of climatological and user environments.
Ratajczak, A. F.↗
Baseband processor development/test performance for 30/20 GHz SS-TDMA communication system
The baseband processor (BBP) development for the 30/20 GHz Satellite Communication System is described. The SS-TDMA concept for future satellite communications is reviewed, describing the overall system, the satellite payload, and the frequency plan. A brief general description of the BBP is given, and the proof-of-concept model of the BBP is summarized. Key technologies and custom LSI developed for the BBP are listed. Finally, key technology developments and test data are reported for the BBP.
Brown, L.↗
Practical input optimization for aircraft parameter estimation experiments
The object of this research was to develop an algorithm for the design of practical, optimal flight test inputs for aircraft parameter estimation experiments. A general, single pass technique was developed which allows global optimization of the flight test input design for parameter estimation using the principles of dynamic programming with the input forms limited to square waves only. Provision was made for practical constraints on the input, including amplitude constraints, control system dynamics, and selected input frequency range exclusions. In addition, the input design was accomplished while imposing output amplitude constraints required by model validity and considerations of safety during the flight test. The algorithm has multiple input design capability, with optional inclusion of a constraint that only one control move at a time, so that a human pilot can implement the inputs. It is shown that the technique can be used to design experiments for estimation of open loop model parameters from closed loop flight test data. The report includes a new formulation of the optimal input design problem, a description of a new approach to the solution, and a summary of the characteristics of the algorithm, followed by three example applications of the new technique which demonstrate the quality and expanded capabilities of the input designs produced by the new technique. In all cases, the new input design approach showed significant improvement over previous input design methods in terms of achievable parameter accuracies.
Morelli, Eugene A.↗
A Complete Tank Test of the Hull of the Sikorsky S-40 Flying Boat - American Clipper Class
The results of a complete test in the N.A.C.A. tank on a model of the hull of Sikorsky S-40 flying boat ('American Clipper') are reported. The test data are given in tables and curves. From these data non-dimensional coefficients are derived for use in take-off calculations and the take-off time and run for the S-40 are computed. The computed take-off time was obtained by the Sikorsky Aviation Corporation in performance tests of the actual craft.
Dawson, John R↗
AMSD Test Plan
The overall government plan to verify compliance of AMSD mirror systems to the specifications as given in the contract Statement of Work will be presented. The plan will address test requirements, test hardware, AMSD-XRCF interfacing, government vs contractor responsibilities, tests to be carried out, test conduction, and test data reduction & reporting. Issues regarding input to the plan and schedule of plan milestones will also be addressed.
Hadaway, James↗
Mechanics Methodology for Textile Preform Composite Materials
NASA and its contractors have completed a program to develop a basic mechanics underpinning for textile composites. Three major deliverables were produced by the program: 1. A set of test methods for measuring material properties and design allowables; 2. Mechanics models to predict the effects of the fiber preform architecture and constituent properties on engineering moduli, strength, damage resistance, and fatigue life; and 3. An electronic data base of coupon type test data. This report describes these three deliverables.
Poe, Clarence C., Jr.↗