Results for “TMY” — Page 6

NASA NTRS1986

Lunar and Martian hardware commonality

A number of different hardware elements were examined for possible Moon/Mars program commonality. These include manned landers; cargo landers, a trans-Mars injection (TMI) stage, traverse vehicles, unmanned surface rovers, habitation modules, and power supplies. Preliminary analysis indicates that it is possible to build a common two-stage manned lander. A single-stage, reusable lander may be practical for the lunar cast, but much less so for the Martian case, and commonality may therefore exist only at the subsystem level. A modified orbit transfer vehicle was examined as a potential cargo lander. Potential cargoes to various destinations were calculated for a Shuttle external tank sized TMI stage. A nuclear powered, long range traverse vehicle was conceptually designed and commonality is considered feasible. Short range, unmanned rovers can be made common without great effort. A surface habitation module may be difficult to make common due to difficulties in landing certain shapes on the Martian surface with aerobraking landers. Common nuclear power sources appear feasible. High temperature radiators appear easy to make common. Low temperature radiators may be difficult to make common. In most of these cases, Martian requirements determine the design.

Davis, Hubert P.↗

NASA NTRS1989

The AMSC mobile satellite system: Design summary and comparative analysis

Mobile satellite communications will be provided in the United States by the American Mobile Satellite Consortium (AMSC). Telesat Mobile, Inc. (TMI) and AMSC are jointly developing MSAT, the first regional Mobile Satellite Service (MSS) system. MSAT will provide diverse mobile communications services - including voice, data and position location - to mobiles on land, water, and in the air throughout North America. Described here are the institutional relationships between AMSC, TMI and other organizations participating in MSAT, including the Canadian Department of Communications and NASA. The regulatory status of MSAT in the United States and international allocations to MSS are reviewed. The baseline design is described.

Noreen, Gary K.↗

NASA NTRS1990

Domestic mobile satellite systems in North America

Telest Mobile Inc. (TMI) and the American Mobile Satellite Corporation (AMSC) are authorized to provide mobile satellite services (MSS) in Canada and the United States respectively. They are developing compatible systems and are undertaking joint specification and procurement of spacecraft and ground segment with the aim of operational systems by late 1993. Early entry (phase 1) mobile data services are offered in 1990 using space segment capacity leased from Inmarsat. Here, an overview is given of these domestic MSS with an emphasis on the TMI component of the MSAT systen.

Wachira, Muya↗

NASA NTRS1992

Project Minerva: A low-cost manned Mars mission based on indigenous propellant production

Project Minerva is a low-cost manned Mars mission designed to deliver a crew of four to the Martian surface, using only two sets of two launches. Key concepts which make this mission realizable are the use of near-term technologies and in-situ propellant production, following the senario originally proposed by R. Zubrin of Martin Marietta. The first set of launches delivers two unmanned payloads into low earth orbit (LEO): one consists of an Earth Return Vehicle (ERV), a propellant production plant, and a set of robotic vehicles, and the second consists of the upper stage/trans-Mars injection (TMI) booster. In LEO, the two payloads are joined and inserted into a Mars transfer orbit. The landing on Mars is performed with the aid of multiple aerobraking maneuvers. On the Martian surface, the propellant production plant uses a Sabatier/electrolysis-type process to combine six tons of hydrogen brought from earth with carbon dioxide from the Martian atmosphere to produce 100 tons of liquid oxygen and methane, which are later used as the propellants for the rover expeditions and the manned return journey of the ERV. Once the in-situ propellant production is completed, approximately two years after the first set of launches, the manned portion of the mission leaves earth. This set of two launches is similar to that of the unmanned vehicles; the two payloads are the Manned Transfer Vehicle (MTV) and the upper stage/TMI booster. The MTV contains the manned rover and the habitat which houses the astronauts enroute to Mars and on the Martian surface. During the 180-day trip to Mars, artificial gravity is created by tethering the MTV to the TMI booster and inducing rotation. Upon arrival the MTV performs aerobraking maneuvers to land near the fully-fueled ERV, which will be used by the crew a year and a half later to return to earth. The mission entails moderate travel times with relatively low-energy conjunction-class trajectories and allows ample time for scientific exploration. This set of missions can be repeated every two years in order to continue exploration at a variety of sites and gradually establish the infrastructure for a permanent base on Mars.

Bruckner, Adam P.↗

NASA NTRS1997

Development of Design Standards and Guidelines for Electromagnetic Compatibility and Lightning Protection for Spacecraft Utilizing Composite Materials

This final report presents information concerning technical accomplishments by Tec-Masters, Inc. (TMI) for this contract effort. This effort included the accomplishment and/or submission by TMI of the following items: (1) Literature Survey Report, Electrical Properties of Non-Metallic Composites by Mr. Hugh W. Denny; (2) Interim Report, Composite Materials - Conductivity, Shielding Effectiveness, and Current Carrying Capability by Mr. Ross W. Evans; (3) Fault Current Test Plan by Mr. Ross W. Evans (4) Fault Current Test Procedure by Mr. Ross W. Evans (5) Test Report, Fault Current Through Graphite Filament Reinforced Plastic, NASA CR-4774, Marshall Space Flight Center, Alabama, September 1996, by Mr. Ross W. Evans; (6) Test Plan, Lightning Effects on Composite Materials by Mr. Ross W. Evans; (7) Test Report, Lightning Effects on Composite Materials, NASA CR-4783, Marshall Space Flight Center, Alabama, February 1997, by Mr. Ross W. Evans; (8) Design Guidelines for Shielding Effectiveness, Current Carrying Capability, and the Enhancement of Conductivity of Composite Materials, NASA CR-4784, Marshall Space Flight Center, Alabama, September 1996, by Mr. Ross W. Evans. These items are not attached but are considered to be a part of this final report. Efforts on two additional items were accomplished at no increase in cost to NASA/MSFC. These items consisted of updating the 'MSFC EMC Design and Interference Control Handbook,' and revising the 'Design Guidelines for Shielding Effectiveness, Current Carrying Capability, and the Enhancement of Conductivity of Composite Materials.'

Camp, Dennis W.↗

NASA NTRS1999

Improving Reanalyses Using TRMM and SSM/I-Derived Precipitation and Total Precipitable Water Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of rainfall and total precipitable water (TPW) observations from the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve these fields in reanalyses. The DAO has developed a "1+1"D procedure to assimilate 6-hr averaged rainfall and TPW into the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS. The "1+1" designation refers to one spatial dimension plus one temporal dimension. The scheme minimizes the least-square differences between the satellite-retrieved rain rates and those produced by the column model over the 6-hr analysis window. The control variables are analysis increments of moisture within the Incremental Analysis Update (IAU) framework of the GEOS DAS. This 1+1D scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but differs in its choice of the control variable. Instead of estimating the initial condition at the beginning of the assimilation cycle, it estimates the constant IAU forcing applied over a 6-hr assimilation cycle. In doing so, it imposes the forecast model as a weak constraint in a manner similar to the variational continuous assimilation techniques. We present results from an experiment in which the observed rain rate and TPW are assumed to be "perfect". They show that assimilating the TMI and SSM/I-derived surface precipitation and TPW observations improves not only the precipitation and moisture fields but also key climate parameters directly linked to convective activities such as clouds, the outgoing longwave radiation, and the large-scale circulation in the tropics. In particular, assimilating these data types reduce the state-dependent systematic errors in the assimilated products. The improved analysis also leads to a better short-range forecast, but the impact is modest compared with improvements in the time-averaged fields. These results suggest that, in the presence of biases and other errors of the forecast model, it is possible to improve the time-averaged "climate content" in the assimilated data without comparable improvements in the short-range forecast skill. Results of this experiment provide a useful benchmark for evaluating error covariance models for optimal use of these data types.

Hou, Arthur Y.↗

NASA NTRS1999

Improved Algorithm to Estimate Convective and Stratiform Rain from TRMM Microwave Radiometer Data

The rain rates associated with Mesoscale Convective Systems (MCSS) deduced from the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) follow the well known log-normal type frequency distribution characteristic of conventional radars and rain gauges. On the other hand, the current microwave radiometer rain retrieval algorithms cannot give good representations of convective and stratiform precipitation. Thus they capture poorly this log-normal character. In particular, this is noticed clearly over land areas. The objective of the present study is to improve TRMM Microwave Imager (TMI) retrievals of convective and stratiform rain to a level comparable to the PR. For this purpose, we have developed a TMI rain retrieval algorithm that depends primarily on the 85 GHz brightness temperatures (Tbs) and their spatial distribution. We emphasize the 85 GHz channel because of its fine footprint size (about 5.5 km) and strong extinction property. The other spectral channels, because they are poorer in these respects, are given less importance. The brightness temperatures and spatial distribution information in the 85 GHz allows us to detect thunderstorms, or cumulonimbus clouds (Cbs), that are in different stages of development, as well as stratiform rain outside of these Cbs. Utilizing our retrieval technique, we have produced maps of convective and stratiform rain for several MCS events over land and ocean that agree well with those given by the PR. On average, the convective and stratiform rain rates given by our technique have an accuracy of about 15 % with respect to those given by the PR.

Prabhakara, C.↗

NASA NTRS1999

Improving Global Reanalyses and Short-Range Forecast Using TRMM and SSM/I-Derived Precipitation and Moisture Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of tropical rainfall and total precipitable water (TPW) observations from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve short-range forecast and reanalyses. We describe a 1+1D procedure for assimilating 6-hr averaged rainfall and TPW in the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS, hence the 1+1D designation. The scheme minimizes the least-square differences between the observed TPW and rain rates and those produced by the column model over the 6-hr analysis window. This 1+1D scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but uses analysis increments instead of the initial condition as the control variable. Results show that assimilating the TMI and SSW rainfall and TPW observations improves not only the precipitation and moisture fields but also key climate parameters such as clouds, the radiation, the upper-tropospheric moisture, and the large-scale circulation in the tropics. In particular, assimilating these data reduce the state-dependent systematic errors in the assimilated products. The improved analysis also provides better initial conditions for short-range forecasts, but the improvements in forecast are less than improvements in the time-averaged assimilation fields, indicating that using these data types is effective in correcting biases and other errors of the forecast model in data assimilation.

Hou, Arthur Y.↗

NASA NTRS1998

A Conceptual Approach to Assimilating Remote Sensing Data to Improve Soil Moisture Profile Estimates in a Surface Flux/Hydrology Model: Overview - Part 1

Knowledge of the amount of water in the soil is of great importance to many earth science disciplines. Soil moisture is a key variable in controlling the exchange of water and energy between the land surface and the atmosphere. Thus, soil moisture information is valuable in a wide range of applications including weather and climate, runoff potential and flood control, early warning of droughts, irrigation, crop yield forecasting, soil erosion, reservoir management, geotechnical engineering, and water quality. Despite the importance of soil moisture information, widespread and continuous measurements of soil moisture are not possible today. Although many earth surface conditions can be measured from satellites, we still cannot adequately measure soil moisture from space. Research in soil moisture remote sensing began in the mid 1970s shortly after the surge in satellite development. Recent advances in remote sensing have shown that soil moisture can be measured, at least qualitatively, by several methods. Quantitative measurements of moisture in the soil surface layer have been most successful using both passive and active microwave remote sensing, although complications arise from surface roughness and vegetation type and density. Early attempts to measure soil moisture from space-borne microwave instruments were hindered by what is now considered sub-optimal wavelengths (shorter than 5 cm) and the coarse spatial resolution of the measurements. L-band frequencies between 1 and 3 GHz (10-30 cm) have been deemed optimal for detection of soil moisture in the upper few centimeters of soil. The Electronically Steered Thinned Array Radiometer (ESTAR), an aircraft-based instrument operating a 1,4 GHz, has shown great promise for soil moisture determination. Initiatives are underway to develop a similar instrument for space. Existing space-borne synthetic aperture radars (SARS) operating at C- and L-band have also shown some potential to detect surface wetness. The advantage of radar is its much higher resolution than passive microwave systems, but it is currently hampered by surface roughness effects and the lack of a good algorithm based on a single frequency and single polarization. In addition, its repeat frequency is generally low (about 40 days). In the meantime, two new radiometers offer some hope for remote sensing of soil moisture from space. The Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), launched in November 1997, possesses a 10.65 GHz channel and the Advanced Microwave Scanning Radiometer (AMSR) on both the ADEOS-11 and Earth Observing System AM-1 platforms to be launched in 1999 possesses a 6.9 GHz channel. Aside from issues about interference from vegetation, the coarse resolution of these data will provide considerable challenges pertaining to their application. The resolution of TMI is about 45 km and that of AMSR is about 70 km. These resolutions are grossly inconsistent with the scale of soil moisture processes and the spatial variability of factors that control soil moisture. Scale disparities such as these are forcing us to rethink how we assimilate data of various scales in hydrologic models. Of particular interest is how to assimilate soil moisture data by reconciling the scale disparity between what we can expect from present and future remote sensing measurements of soil moisture and modeling soil moisture processes. It is because of this disparity between the resolution of space-based sensors and the scale of data needed for capturing the spatial variability of soil moisture and related properties that remote sensing of soil moisture has not met with more widespread success. Within a single footprint of current sensors at the wavelengths optimal for this application, in most cases there is enormous heterogeneity in soil moisture created by differences in landcover, soils and topography, as well as variability in antecedent precipitation. It is difficult to interpret the meaning of 'mean' soil moisture under such conditions and even more difficult to apply such a value. Because of the non-linear relationships between near-surface soil moisture and other variables of interest, such as surface energy fluxes and runoff, mean soil moisture has little applicability at such large scales. It is for these reasons that the use of remote sensing in conjunction with a hydrologic model appears to be of benefit in capturing the complete spatial and temporal structure of soil moisture. This paper is Part I of a four-part series describing a method for intermittently assimilating remotely-sensed soil moisture information to improve performance of a distributed land surface hydrology model. The method, summarized in section II, involves the following components, each of which is detailed in the indicated section of the paper or subsequent papers in this series: Forward radiative transfer model methods (section II and Part IV); Use of a Kalman filter to assimilate remotely-sensed soil moisture estimates with the model profile (section II and Part IV); Application of a soil hydrology model to capture the continuous evolution of the soil moisture profile within and below the root zone (section III); Statistical aggregation techniques (section IV and Part II); Disaggregation techniques using a neural network approach (section IV and Part III); and Maximum likelihood and Bayesian algorithms for inversely solving for the soil moisture profile in the upper few cm (Part IV).

Crosson, William L.↗

NASA NTRS2000

Improving Global Reanalyses and Short Range Forecast Using TRMM and SSM/I-Derived Precipitation and Moisture Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of tropical rainfall and total precipitable water (TPW) observations from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve short-range forecast and reanalyses. We describe a "1+1"D procedure for assimilating 6-hr averaged rainfall and TPW in the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS, hence the "1+1"D designation. The scheme minimizes the least-square differences between the observed TPW and rain rates and those produced by the column model over the 6-hr analysis window. This 1+lD scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but uses analysis increments instead of the initial condition as the control variable. Results show that assimilating the TMI and SSM/I rainfall and TPW observations improves not only the precipitation and moisture fields but also key climate parameters such as clouds, the radiation, the upper-tropospheric moisture, and the large-scale circulation in the tropics. In particular, assimilating these data reduce the state-dependent systematic errors in the assimilated products. The improved analysis also provides better initial conditions for short-range forecasts, but the improvements in forecast are less than improvements in the time-averaged assimilation fields, indicating that using these data types is effective in correcting biases and other errors of the forecast model in data assimilation.

Hou, Arthur Y.↗

NASA NTRS2000

A TRMM-Calibrated Infrared Rainfall Algorithm Applied Over Brazil

The development of a satellite infrared technique for estimating convective and stratiform rainfall and its application in studying the diurnal variability of rainfall in Amazonia are presented. The Convective-Stratiform. Technique, calibrated by coincident, physically retrieved rain rates from the Tropical Rain Measuring Mission (TRMM) Microwave Imager (TMI), is applied during January to April 1999 over northern South America. The diurnal cycle of rainfall, as well as the division between convective and stratiform rainfall is presented. Results compare well (a one-hour lag) with the diurnal cycle derived from Tropical Ocean-Global Atmosphere (TOGA) radar-estimated rainfall in Rondonia. The satellite estimates reveal that the convective rain constitutes, in the mean, 24% of the rain area while accounting for 67% of the rain volume. The effects of geography (rivers, lakes, coasts) and topography on the diurnal cycle of convection are examined. In particular, the Amazon River, downstream of Manaus, is shown to both enhance early morning rainfall and inhibit afternoon convection. Monthly estimates from this technique, dubbed CST/TMI, are verified over a dense rain gage network in the state of Ceara, in northeast Brazil. The CST/TMI showed a high bias equal to +33% of the gage mean, indicating that possibly the TMI estimates alone are also high. The root mean square difference (after removal of the bias) equaled 36.6% of the gage mean. The correlation coefficient was 0.77 based on 72 station-months.

Negri, A. J.↗

NASA NTRS2000

Remotely Sensed Precipitation from the January 2000 East Coast Blizzard

Initial precipitation forecasts of the January 2000 blizzard were unable to adequately alert emergency response along the eastern seaboard. Cyclogenesis, over the Gulf of Mexico was a contributing cause of that problem. We present distributions of precipitation derived from spaceborne microwave measurements from the Special Sensor Microwave/ Imager (SSM/I) and the TRMM Microwave Imager (TMI) supplemented by NWS operational radar and the National lightning Detection Network (NLDN) Long-Range (LR) product. The combined NWS radar and NLDN-LR data revealed the location of precipitation between 1/23 and 1/27/2000 over the US, the Gulf and the Atlantic Ocean. The remotely sensed precipitation distributions are compared to the precipitation inferred from coincident TMI observations.

Chang, D.-E.↗

NASA NTRS2000

Evolution of South China Sea Summer Monsoon During SCSMEX-98: An Application of TRMM Data for Regional Hydro-Climate Studies

Evolution of South China Sea (SCS) summer monsoon in May-June, 1998 is investigated by using NASA/Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and Precipitation Radar (PR) data and the SCS Monsoon Experiment (SCSMEX) data. The five-day mean moisture budget over the SCS region, and TMI surface rain rate, winds and divergence are calculated for the periods of pre-monsoon, onset, mature, and break. Results show that the SCS monsoon onset is triggered by the southward-propagating mid-latitude frontal system and the eastward-propagating intraseasonal oscillations. The disastrous flooding over the Yangtze River Basin in 1998 is caused mainly by the massive moisture transport by the lower-tropospheric prevailed westerly winds associated with the depression over the Bay of Bengal. The TRMM PR data are used to calculate the vertical distribution of fractional cover of Corrected Z-factor. Before the onset, the fractional cover 1-2% of 20-30 dBz appears around 2 km, indicating marine status clouds, During the monsoon onset and mature, the factional cover 34% of 25-35 dBz occurs below 6 km, indicating strong convection. The factional cover 5% of 20 dBz is around 8 km, which is indicative of large stratiform ice clouds. Yangtze River (YR) floods occurred as a part of the evolution of the East Asian summer monsoon. The rain rate over the YR shows out of phase with rainfall over the SCS. The vertical structures and statistical properties of clouds over the YR are compared with those over the SCS.

Lau, K.-M.↗

NASA NTRS2001

Gridded Hourly Text Products: A TRMM Data Reduction Approach

The quantity of precipitation data from satellite-based observations is a blessing and a curse. The sheer volume of the data makes it difficult for many researchers to use in targeted applications. This volume increases further as algorithm improvements lead to the reprocessing of mission data. In addition to the overall volume of data, the size and format complexity of orbital granules contribute to the difficulty in using all the available data. Finally, the number of different instruments available to measure rainfall and related parameters further contributes to the volume concerns. In summary, we have an embarrassment of riches. The science team of the Tropical Rainfall Measuring Mission (TRMM) recognized this dilemma and has developed a strategy to address it. The TRMM Science Data and Information System (TSDIS) produces, at the direction of the Joint TRMM Science Team, a number of instantaneous rainfall products. The TRMM Microwave Imager (TMI), the Precipitation Radar and a Combined TMI/PR are the key "instruments" used in this production. Each of these products contains an entire orbit of data. The algorithm code computes not just rain rates but a large number of other physical parameters as well as information needed for monitoring algorithm performance. That makes these products very large. For example, a single orbit of TMI rain rate product is 99 MB, a single orbit of the combined product yields a granule that is 158 MB, while the 80 vertical levels of rain information from the PR yields an orbital product of 253 MB. These are large products that are often difficult for science users to electronically transfer to their sites especially if they want a large period of time. Level 3 gridded products are much smaller, but their 5 or 30 day temporal resolution is insufficient for many researchers. In addition, TRMM standard products are produced in the HDF format. While a large number of user-friendly tools are available to hide the details of the format (including a toolkit developed at TSDIS for the TRMM science team), many potential users shy away

Stocker, Erich↗

NASA NTRS2001

Overview and Scientific Agenda of Global Precipitation Mission

This paper addresses the status of the Global Precipitation Mission (GPM) currently planned for launch in the 2007-2008 time frame. The GPM notional design involves a 9-member satellite constellation, one of which wilt be an advanced TRMM-like "core" satellite carrying a dual-frequency Ku-Ka band radar (DFPR) and a TMI-like radiometer. The other eight members of the constellation will be considered daughters of the core satellite, each carrying some type of passive microwave radiometer measuring across the 10.7 - 85 GHz ,frequency range - likely to include a combination of lightweight satellites and co-existing operational/Experimental satellites carrying passive microwave radiometers (i.e., SSM/I and AMSR-E & -F). The constellation is designed to provide no worse than 3-hour sampling at any spot on the globe using sun-synchronous orbit architecture for the daughter satellites, with the core satellite providing relevant measurements on internal cloud-precipitation microphysical processes and the "training-calibrating" information for retrieval algorithms used on daughter satellite measurements. The GPM is organized internationally, currently involving a partnership between NASA in the US, NASDA in Japan, and ESA in Europe (representing the European community nations). The mission is expected to involve additional international participants, sister agencies to the mainstream space agencies, and a diverse collection scientists from academia, government, and the private sector, A critical element in understanding the scientific thinking which has motivated the GPM project is an understanding of what scientific problems TRMM has and has not been able to address and at what scales. The TRMM satellite broke important scientific ground because it carried to space an array of rain-sensitive instruments, two of which were specifically designed for physical precipitation retrieval. These were the 9-channel TRMM Microwave Imager (TMI) and the 13.8 GHz Precipitation Radar (PR). By the same token, because TRMM is a single satellite in a low inclination, low altitude, non-sun-synchronous orbit, it cannot provide global coverage or regular diurnal sampling. These features are essential for many current scientific inquiries involving physical processes of climate and the global water cycle, the modeling of hydrometeorological-biogeochemical cycling, and coupled land-atmosphere/ocean-atmosphere exchanges. Moreover, TRMM has not been able to retrieve explicit properties of the drop size distribution (DSD), a final major barrier to making accurate rain measurements, because the single frequency TRMM radar cannot measure differential reflectivity. which is a minimal requirement for attacking rain retrieval within the framework of extinction cross-section-dependency. GPM is expected to surmount much of the DSD retrieval problem because its core satellite wilt have the capacity to make differential reflectivity measurements with its Ku-Ka band radar (13.6 - 35 GHz) called DFPR - being developed by NASDA/CRL in Japan. This paper will provide an overview of the above issues as well as present a discussion on the expected measurement improvements.

Smith, Eric A.↗

NASA NTRS2001

TRMM Data Assimilation at NASA

We give an overview of the research at NASA in assimilating tropical rainfall and total precipitable water (TPW) retrievals derived from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments. Global analyses currently contain order-one errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. We show that an effective strategy to assimilate tropical rainfall data is to use observations to compensate for errors in moisture tendencies produced by the assimilation model. Results show that assimilating TMI and SSM/I surface rainrates and TPW estimates improves shortrange forecasts and reduces state-dependent systematic errors in the hydrological cycle and related climate parameters such as cloud, radiation, and the large-scale circulation in the tropics. The study provides a demonstration of the potential of using rainfall and moisture observations derived from passive microwave instruments to improve the quality of 4-dimensional global datasets for climate analysis and weather forecasting applications.

Hou, Arthur Y.↗

NASA NTRS2001

Validation of TRMM Satellite Rainfall Products Over Oklahoma for a Three Year Period (1998-2000)

This study evaluates the level 2 and level 3 rainfall products from the Tropical Rainfall Measuring Mission gridded distribution of 118 high resolution tipping buckets from the Oklahoma Mesonet. The Tropical Rainfall Measuring Mission, a joint satellite mission between NASA and the National Space Development Agency (NASDA) of Japan, was designed to estimate global precipitation between 40 S and 40 N latitude. The TRMM satellite, consisting of two main precipitation sensors, a passive microwave (TMI) and precipitation radar (PR) sensors, was launched in 1997. Although the great advantage of TRMM has been its ability to sample precipitation globally over the tropical oceans in places where ground sensors do not exist, regional points over land still offer the best opportunity for validating these rain estimates. For this study, the gauge data was gridded at I x I degree resolution between 34 and 36 N and -95 and -100 W. The location of Oklahoma is somewhat unique, in that, it is located near the turning point for the satellite. This study investigates effects of temporal sampling on the satellite measurements and the resulting rainfall bias observed between space and ground based sensors. The first part of the study analyzes the monthly rainfall statistics of the 3AI2 (TMI), the 3A25 (PR) and the 31142 (combined sensors) with the rain gauges. It uses regression techniques and a computation of the probability density function (PDF) and cumulative probability density function (CDF) for each sensor to evaluate the effects of temporal sampling on the satellite products and the sufficiency of using two overpasses a day to estimate rainfall on a monthly scale. In further probing this issue, the study also looked at the direct coincidence of ground and satellite measurements by comparing instantaneous comparisons obtained from the level 2 orbital track data, e.g. 2A12, 2A25. Lastly, the effects of temporal sampling were further studied by sub-sampling the gauge data only at overpass times. This methodology provides a quantitative way of separately inferring the fraction of bias due to temporal sampling and the rainfall algorithm. In addition to showing the salient effects of temporal sampling, the study also revisits the historical problem of correlating point gauge estimates with area estimates, though, the problem is ameliorated by averaging and gridding the data to the area resolution scale of the satellite.

Fisher, Brad↗

NASA NTRS2001

TRMM Precipitation Radar and Microwave Imager Observations of Convective and Stratiform Rain Over Land and Their Theoretical Implications

Observations of brightness temperature, Tb made over land regions by the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) radiometer have been analyzed along with the nearly simultaneous measurements of the vertical profiles of reflectivity factor, Z, made by the Precipitation Radar (PR) onboard the TRMM satellite. This analysis is performed to explore the interrelationship between the TMI and PR data in areas that are covered predominantly by convective or stratiform rain. In particular, we have compared on a scale of 20 km, average vertical profiles of Z with the averages of Tbs in the 19, 37 and 85 GHz channels. Generally, we find from these data that as Z increases, Tbs in the three channels decrease due to extinction. In order to explain physically the relationship between the Tb and Z observations, we have performed radiative transfer simulations utilizing vertical profiles of hydrometeors applicable to convective and stratiform rain regions. These profiles are constructed taking guidance from the Z observations of PR and recent LDR and ZDR measurements made by land-based polarimetric radars.

Prabhakara, C.↗