Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THRESHOLD CURRENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A semiconductor ring laser: study of its characteristics as a rotation sensor

A semiconductor ring laser (SRL) with a radiation wavelength of 1540 nm and a fibre ring cavity is developed and studied in several main lasing regimes. An SRL design based on a semiconductor optical travelling-wave amplifier and a ring cavity, composed of a single-mode polarisation-maintaining fibre, is considered. The SRL is studied in the regime of a rotation speed sensor, in which the frequency shift of counterpropagating waves in the SRL is proportional to its rotation speed. The minimum rotation speed that can be detected using the SRL under consideration depends on the cavity length; in our experiment it turned to be 1deg s{sup -1}. The changes in the threshold current, emission spectrum, and fundamental radiation wavelength upon closing and opening the SRL ring cavity and with a change in its radius are also investigated. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of the electron capture velocity on the quantum-well depth in semiconductor lasers

Three laser structures with a single strained InGaAs quantum well of different depths and a GaAs or Al{sub 0.1}Ga{sub 0.9}As waveguide region are grown by metal-organic chemical vapor deposition. Using the experimentally determined values of the threshold current density and internal differential quantum efficiency, the velocity of electron capture into the quantum well is calculated for each of these structures. It is found that the capture velocity into deep quantum wells is significantly lower than into shallow ones.

36 MATERIALS SCIENCE↗

Room-temperature operation of quantum cascade lasers at a wavelength of 5.8 μm

The room-temperature generation of multiperiod quantum-cascade lasers (QCL) at a wavelength of 5.8 μm in the pulsed mode is demonstrated. The heterostructure of a quantum-cascade laser based on a heterojunction of InGaAs/InAlAs alloys is grown by molecular-beam epitaxy and incorporates 60 identical cascades. The threshold current density of the stripe laser 1.4 mm long and 22 μm wide is ~4.8 kA/cm{sup 2} at a temperature of 303 K. The maximum power of the optical-radiation output from one QCL face, recorded by a detector, is 88 mW. The actual optical-power output from one QCL face is no less than 150 mW. The results obtained and possible ways of optimizing the structure of the developed quantum-cascade lasers are discussed.

36 MATERIALS SCIENCE↗

Room Temperature Lasing of Multi-Stage Quantum-Cascade Lasers at 8 μm Wavelength

Room-temperature lasing at a wavelength of 8 μm in multistage quantum-cascade lasers pumped by current pulses is demonstrated. A quantum-cascade laser heterostructure based on the In{sub 0.53}Ga{sub 0.47}As/A{sub l0.48}In{sub 0.5}2As alloy heteropair, matched to an InP substrate, is grown by molecular-beam epitaxy and consists of 50 identical cascades placed in a waveguide with air as the top cladding. A threshold current density of ~5.1 kA/cm{sup 2} at a temperature of 300 K is obtained in ridge lasers with a cavity length of 1.4 mm and a ridge width of 24 μm.

36 MATERIALS SCIENCE↗

3 W continuous-wave room temperature single-facet emission from quantum cascade lasers based on nonresonant extraction design approach

A strain-balanced, InP-based quantum cascade laser structure, designed for light emission at 4.6 {mu}m using a new nonresonant extraction design approach, was grown by molecular beam epitaxy. Removal of the restrictive two-phonon resonant condition, currently used in most structure designs, allows simultaneous optimization of several design parameters influencing laser performance. Following the growth, the structure was processed in buried heterostructure. Maximum single-ended continuous-wave optical power of 3 W was obtained at 293 K for devices with stripe dimensions of 5 mmx11.6 {mu}m. Corresponding maximum wallplug efficiency and threshold current density were measured to be 12.7% and 0.86 kA/cm{sup 2}.

36 MATERIALS SCIENCE↗

Determination of gain in AlGaN cladding free nitride laser diodes

The optical gain spectra of InGaN-based multiple-quantum-well (MQW) laser diodes (LDs) grown by plasma-assisted molecular beam epitaxy are compared for different emission wavelengths. Two AlGaN cladding free LDs with similar epitaxial structures but with different In compositions in MQW were grown to study the dependence of material gain on lasing wavelength. As the emission wavelength increased from 432 to 458 nm, the differential modal gain decreased from 5.7 to 4.7 cm/kA, and the optical losses increased from 40 to 46 cm{sup −1} resulting in an increase in threshold current density. This dependence is attributed to lower optical mode confinement of LD emitting at longer wavelength. We found a strong decrease of confinement factor with increasing wavelength.

36 MATERIALS SCIENCE↗

Vertical-cavity surface-emitting lasers with intracavity contacts and a rhomboidal current aperture for compact atomic clocks

Single-mode vertical-cavity surface-emitting lasers (VCSELs) with intracavity contacts, composite distributed Bragg reflectors, and a rhomboidal selectively-oxidised current aperture are studied. It is shown that the use of a rhomboidal current aperture allows the light output polarisation to be fixed without using a special surface relief and leads to efficient narrowing of the emission line with retaining a high slope efficiency. The developed VCSELs have a high output power (exceeding 1 mW), a threshold current below 1 mA, an effective modulation frequency exceeding 5 GHz, and a linewidth smaller than 60 MHz at increased (65 – 75 °C) temperatures and are promising for application in compact Cs vapour cell atomic clocks. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature delocalization of charge carriers in semiconductor lasers

The temperature dependences of emission characteristics are investigated for laser diodes based on asymmetric separate-confinement heterostructures with a broadened waveguide. It is established that an increase in the charge-carrier concentration in the waveguide layer is the basic mechanism of saturation in the light-current characteristic with increasing temperature in the CW mode. It is experimentally shown that the temperature delocalization of charge carriers leads to increasing internal optical losses and decreasing external differential quantum efficiency. It is shown that the degree of delocalization of charge carriers depends on the charge-carrier temperature distribution, the threshold concentration, and the quantum-well depth. The effect of thickness and energy depth of the quantum well on the temperature sensitivity of the threshold current and output optical power is considered.

36 MATERIALS SCIENCE↗

Effect of current on magnetization oscillations in the ferromagnet-antiferromagnet junction

The effect of spin-polarized current on the steady-state magnetization and oscillations of antiferromagnet magnetization in a ferromagnetic-antiferromagnetic magnetic junction is analyzed. The macrospin approximation is generalized to describe antiferromagnets. The canted configuration of the antiferromagnet and the resultant magnetic moment are produced by the application of an external magnetic field. The resonance frequency, damping, and threshold current density corresponding to the emergence of instability are calculated. The possibility of generating weakly damped magnetization oscillations in the terahertz range is demonstrated. The effect of fluctuations on the canted configuration of the antiferromagnet is discussed.

36 MATERIALS SCIENCE↗

GaSb-based, 2.2 {mu}m type-I laser fabricated on GaAs substrate operating continuous wave at room temperature

We report on a Sb-based type-I laser grown on GaAs substrate, emitting continuous wave at room temperature around 2.2 {mu}m. The device was grown using solid-source molecular beam epitaxy and comprised two GaInAsSb quantum wells embedded in AlGaAsSb barriers. Despite the large lattice mismatch, a good crystalline quality was obtained, and processed devices operated continuous wave up to 50 deg. C with threshold current densities in the range of 1.5-2.2 kA/cm{sup 2}. An optical output power of 3.7 mW was obtained at 20 deg. C.

36 MATERIALS SCIENCE↗

Terahertz quantum cascade lasers based on quaternary AlInGaAs barriers

Terahertz quantum cascade lasers incorporating lattice-matched quaternary AlInGaAs barriers grown by molecular beam epitaxy on InP substrate are reported. Four quantum well active region devices exhibited lasing at 3.8 THz with threshold current densities as low as 74 A/cm{sup 2} at 10 K. From optical characterization and a doping study of the active region, an upper state lifetime of 8 ps, as well as a long transport time across the active region of 68 ps and a ratio of free carrier loss to gain cross sections of 4.6%, is reported. A maximum operating temperature of 130 K was achieved for a device with a conduction band discontinuity of 0.14 eV.

36 MATERIALS SCIENCE↗

Cascade type-I quantum well diode lasers emitting 960 mW near 3 μm

The cascade pumping scheme reduced the threshold current density of high power type-I quantum well GaSb-based λ ∼ 3 μm diode lasers down to ∼100 A/cm{sup 2} at room temperature. Laser heterostructures had single GaInAsSb quantum well gain stages connected in series by means of GaSb/AlSb/InAs tunnel junctions followed by InAs/AlSb electron injectors. Devices with densely stacked two and three gain stages and 100-μm-wide aperture demonstrated peak power conversion efficiency of 16% and continuous wave output power of 960 mW. Corresponding narrow ridge lasers demonstrated above 100 mW of output power. The experiment showed that the bandwidth of the gain and its rate of increase with current depended strongly on the thickness of AlSb layer separating electron injectors from quantum wells. The possible impact of electron injector interfaces and ionized impurities on the carrier scattering and recombination in the active quantum well is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cyan laser diode grown by plasma-assisted molecular beam epitaxy

We demonstrate AlGaN-cladding-free laser diodes (LDs), operating in continuous wave (CW) mode at 482 nm grown by plasma-assisted molecular beam epitaxy (PAMBE). The maximum CW output power was 230 mW. LDs were grown on c-plane GaN substrates obtained by hydride vapor phase epitaxy. The PAMBE process was carried out in metal-rich conditions, supplying high nitrogen flux (Φ{sub N}) during quantum wells (QWs) growth. We found that high Φ{sub N} improves quality of high In content InGaN QWs. The role of nitrogen in the growth of InGaN on (0001) GaN surface as well as the influence of LDs design on threshold current density are discussed.

36 MATERIALS SCIENCE↗

(In,Ga)As/GaP electrical injection quantum dot laser

The paper reports on the realization of multilayer (In,Ga)As/GaP quantum dot (QD) lasers grown by gas source molecular beam epitaxy. The QDs have been embedded in (Al,Ga)P/GaP waveguide structures. Laser operation at 710 nm is obtained for broad area laser devices with a threshold current density of 4.4 kA/cm{sup 2} at a heat-sink temperature of 80 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Monolithically integrated InGaAs/GaAs/AlGaAs quantum well laser grown by MOCVD on exact Ge/Si(001) substrate

We report on realization of the InGaAs/GaAs/AlGaAs quantum well laser grown by metallorganic chemical vapor deposition on a virtual Ge-on-Si(001) substrate. The Ge buffer layer has been grown on a nominal Si(001) substrate by solid-source molecular beam epitaxy. Such Ge buffer possessed rather good crystalline quality and smooth surface and so provided the subsequent growth of the high-quality A{sub 3}B{sub 5} laser structure. The laser operation has been demonstrated under electrical pumping at 77 K in the continuous wave mode and at room temperature in the pulsed mode. The emission wavelengths of 941 nm and 992 nm have been obtained at 77 K and 300 K, respectively. The corresponding threshold current densities were estimated as 463 A/cm{sup 2} at 77 K and 5.5 kA/cm{sup 2} at 300 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

COMPARISON OF SIMULATION CODES FOR MICROWAVE INSTABILITY IN BUNCHED BEAMS

In accelerator design, there is often a need to evaluate the threshold to the (longitudinal) microwave instability for a bunched beam in an electron storage ring. Several computational tools are available that allow them, once given the wakefield representing a ring, to numerically find the threshold current and to simulate the development of the instability. In this work, they present results of coputer simulations using two codes recently developed at the SLAC National Accelerator Laboratory: a Vlasov-Fokker-Planck (VFP) solver based on an algorithm by Warnock and Ellison, and a program that find the threshold from the linearized Vlasov equation. They apply the programs to find the instability threshold for three models of ring impedances: that of a Q = 1 resonator, of shielded coherent synchrotron radiation (CSR), and of a resistive wall. The first example is wel-bheaved, but the other two are singular wakes that need special care. Note that similar numerical studies of the threshold of a Q = 1 resonantor wake have been performed by Oide and Yokova, and others. They compare the results of the two programs and discuss their respective capabilities and limitations. In this report they assume the slippage factor {eta} is always positive. They work in Gaussian units.

43 PARTICLE ACCELERATORS↗

Analytical model of low and high ablation regimes in carbon arcs

Graphite ablation by an electric arc or a laser/solar flux is widely used for the synthesis of carbon nanomaterials. Previously, it was observed in multiple arc experiments that the ablation rate is a strong nonlinear function of the arc current and it drastically increases at some threshold current. As such, we developed an analytical model explaining this transition in the rate of ablation by an electric arc or a laser/solar flux. The model not only explains the observations but can also accurately predict the experimentally observed ablation rates. The model takes into account redeposition of carbon back to the ablated surface, which is the key process responsible for the observed effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gigahertz analog modulation and differential delay of GaAlAs lasers - Temperature and current behavior

Gigahertz analog modulation characteristics of broad-area commercially available GaAlAs lasers have been investigated as a function of temperature and current in the vicinity of the upper frequency limit, where the resonance phenomena occur. The optimum temperature for small-signal amplitude modulation was found to be around -15 C for our particular broad-stripe geometry double-heterostructure laser. The Q was found to increase by a factor of 2 and the bandwidth by about 2%; the external quantum efficiency was maximized in this range. The optimum dc current bias was about 2% above the threshold current. Differential delays have also been measured down to a few picosecond accuracy by a unique phase-angle measurement method using a vector voltmeter. Some of the temperature effects observed may be related to mode changes and multimode and superradiance behavior.

Eng, S. T.↗