Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMOPHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Mars Thermophysics

Bibliography on thermophysical experiments and analyses for Mars

MARS /PLANET/↗

Validating Advanced Thermophysics Models

Aerospace America year in review article for Thermophysics covering the COMARS data from ExoMars, meteor testing in arcj ets and potential energy surface calculations.

PES↗

Thermophysical Properties of Zirconium at High Temperature

Six thermophysical properties of both the solid and liquid zirconium measured using the high-temperature electrostatic levitator at JPL are presented. These properties are: density, thermal expansion coeffiecient, constant pressure heat capacity, hemispherical total emissivity, surface tension and viscosity.

thermophysical↗

Thermophysical properties of multi-wall carbon nanotube bundles at elevated temperatures up to 830 K

In this paper we discuss the results of thermal transport measurements in multi-wall carbon nanotube (MWCNT) bundles at elevated temperatures. A novel generalized electrothermal technique (GET) was developed for measuring the thermal diffusivity ( ) and conductivity (k) of MWCNT bundles. The results show that the feeding current has a negligible effect on the thermal properties. The measured k is larger than the reported values for unaligned bundles, and is comparable to that of typical aligned arrays. Compared with experimental and theoretical data for individual CNTs, k of the MWCNT bundles is two to three orders of magnitude lower, suggesting that the thermal transport in CNT bundles is dominated by the thermal contact resistance of tube-to-tube junctions. The effective density for the two MWCNT bundles, which is difficult to measure using other techniques, was determined to be 116 kg/m3 and 234 kg/m3, respectively. The temperature dependences of and k at temperatures up to 830 K was obtained. slightly decreases with temperature while k exhibits a small increase with temperature up to 500 K and then decreases. For the first time, the behavior of specific heat cp(T) for CNTs above room temperature was determined. The specific heat is close to graphite at 300~400 K but is lower than that for graphite above 400 K, indicating that the behavior of phonons in MWCNT bundles is dominated by boundary scattering rather than by the three-phonon Umklapp process. The length of the mean curvature between two adjacent tube contact points in these bundles is estimated to be on the order of micrometer to millimeter. The analysis of the radiation heat loss suggests that it needs to be considered when measuring the thermophysical properties of micro/nano wires of high aspect ratios at elevated temperatures, especially for individual CNTs due to their extremely small diameter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recent Progress in U-10Mo Mechanical and Thermophysical Property Characterization

Results are presented on the mechanical and thermophysical property characterization of U-10Mo as part of the MP-1 qualification campaign. The thermal diffusivity, specific heat and thermal conductivity of as fabricated U-10Mo fuel foils and plates were measured using the thermal conductivity microscope (TCM), differential scanning calorimeter (DSC) and laser flash analyzer (LFA) all of which located in a shielded glove box – thermal property cell (TPC). A novel inverse method based on finite element analysis was developed to evaluate the thermal diffusivity of composite/layered materials via the LFA technique such as the 5-lyered U-10Mo monolithic fuel mini-plates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Research on the Thermophysics of Next-Generation Nuclear Reactors

The results of scientific research on the thermophysics of next-generation nuclear reactors conducted at the Leipunskii Institute of Physics and Power Engineering are presented: integrated experimental and computational-theoretical studies to validate design and engineering solutions as well as the safety of fast reactors with sodium and heavy liquid-metal coolant, increasing the efficiency and safety of currently operating and future NPP with water-cooled reactors, software development and certification, pilot research on innovative nuclear power facilities (fast reactors with supercritical water and high-temperature sodium coolant).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermal and Thermophysical Properties of the Radioactive Graphite–Inert Gas System in Heating. Computer Experiment

Consideration has been given to the capabilities of the TERRA software system for modeling thermodynamically the heating of a radioactive graphite–inert gas system in a nuclear reactor. As a result of such modeling, the authors have determined processes occurring in the reactor with the involvement of Eu, Pu, and U actinoids during the heating of the radioactive graphite–argon system at pressures of 10{sup 5} and 10{sup 6} Pa, and also equilibrium constants of chemical reactions and the influence of pressure on them. The thermophysical properties of the system have been studied, and the influence of pressure on its specific volume, the heat capacity, and the molar mass of a gas phase and the weight fraction of a condensed phase has been established.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermophysical Properties of Liquid Tritium: A Path Integral Monte Carlo Study

Here, we present worm-algorithm, path integral Monte Carlo simulations of bulk liquid tritium. The simulations are benchmarked against empirically known thermophysical properties of liquid deuterium and liquid tritium. Results for the pair correlation function, chemical potential, isothermal compressibility, isochoric heat capacity, and single-particle momentum distributions are reported. Given the benchmark comparisons, our predictions of liquid tritium properties are expected to be accurate to within a few percent. Our simulations unambiguously demonstrate the significance of nuclear quantum effects to the properties of liquid tritium. In particular, under saturated vapor pressure, the average molecular kinetic energy of the liquid is found to be more than 60% higher than the value expected from the classical equipartition theorem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Thermophysical Investigations of CoFe{sub 2}O{sub 4}-based Nanofluid: a Potential Heat Transfer Agent

Cobalt ferrite nanoparticles were synthesized by employing chemical co-precipitation technique. The structure, morphology, elemental composition, and magnetization studies of cobalt ferrite nanoparticles were carried by XRD, FE-SEM, EDS, and VSM techniques, respectively. Rietveld refined XRD pattern exhibited the single-phase cubic spinel structure with Fd-3m space group. FE-SEM images indicated some agglomeration of spherical grains which can be attributed to high surface energy and magnetic interactions. Presence of peaks of respective elements (Co, Fe, and O) in EDS spectrum showed formation of CoFe{sub 2}O{sub 4}. The M–H loop recorded at 300 K revealed superparamagnetic behavior and explained by fine particles size. The blocking temperature of the CoFe{sub 2}O{sub 4}nanoparticles from FC-ZFC curve was found to be 144 K. Cobalt ferrite–ethylene glycol nanofluids of various concentrations 0.0–1.0% in steps of 0.2% were prepared by ultrasonically assisted two-step technique. Thermophysical parameters such as thermal conductivity, specific heat, viscosity, and density were investigated as a function of both volume fraction and temperature. The experimental and theoretical value of each sample was correlated. The thermal conductivity was significantly enhanced with an increase in volume fraction and temperature.

36 MATERIALS SCIENCE↗

Understanding the Relationship Between Structure and Thermophysical Properties of CaO-SiO{sub 2}-MgO-Al{sub 2}O{sub 3} Molten Slags

In the present work, the relationship between the microscopic structure and macroscopic thermophysical properties in a basic CaO-SiO{sub 2}-MgO-Al{sub 2}O{sub 3} quaternary system was identified using Fourier transformation infrared, Raman and {sup 27}Al magic angular spinning nuclear magnetic resonance (MAS-NMR) techniques. The Raman spectra quantitatively proved that with increasing Al{sub 2}O{sub 3} content, the concentrations of the symmetric units of Q{sup 0}(Si) and Q{sup 2}(Si) decreased, while those of the asymmetric units of Q{sup 1}(Si) and Q{sup 3}(Si) increased; consequently, the degree of polymerization of the networks increased, which resulted in an increase in slag viscosity. The {sup 27}Al MAS-NMR spectra demonstrated that three structural units of Al atoms, namely, AlO{sub 4}, AlO{sub 5}, and AlO{sub 6}, mainly existed in the networks. With increasing Al{sub 2}O{sub 3} content, the concentration of AlO{sub 4} slightly decreased, while those of AlO{sub 5} and AlO{sub 6} increased; overall, Al{sub 2}O{sub 3} acted as a network former in the present system. The increasing Al{sub 2}O{sub 3} content led to additional AlO{sub 6} and Si-NBO-Ca-NBO-Al frameworks, which replaced Si-NBO-Ca-NBO-Si in the networks (NBO: non-bridging oxygen) and induced a change in the primarily precipitated crystalline phase from Ca{sub 2}MgSi{sub 2}O{sub 7} and Ca{sub 2}Al{sub 2}SiO{sub 7} to MgAlO{sub 4}.

36 MATERIALS SCIENCE↗