Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMAL EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Hydration and Thermal Expansion in Anatase Nanoparticles

A tunable thermal expansion is reported in nanosized anatase by taking advantage of surface hydration. The coefficient of thermal expansion of 4 nm TiO2 along a-axis is negative with a hydrated surface and is positive without a hydrated surface. High-energy synchrotron X-ray pair distribution function analysis combined with ab initio calculations on the specific hydrated surface are carried out to reveal the local structure distortion that is responsible for the unusual negative thermal expansion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Relationships between elastic anisotropy and thermal expansion in A 2 Mo 3 O 12 materials

Here, we report calculated elastic tensors, axial Grüneisen parameters, and thermal stress distributions in Al 2 Mo 3 O 12 , ZrMgMo 3 O 12 , Sc 2 Mo 3 O 12 , and Y 2 Mo 3 O 12 , a series of isomorphic materials for which the coefficients of thermal expansion range from low-positive to negative. Thermal stress in polycrystalline materials arises from interactions between thermal expansion and mechanical properties, and both can be highly anisotropic. Thermal expansion anisotropy was found to be correlated with elastic anisotropy: axes with negative thermal expansion were less compliant. Calculations of axial Grüneisen parameters revealed that the thermal expansion anisotropy in these materials is in part due to the Poisson effect. Models of thermal stress due to thermal expansion anisotropy in polycrystals following cooling showed thermal stresses of sufficient magnitude to cause microcracking in all cases. The thermal expansion anisotropy was found to couple to elastic anisotropy, decreasing the bulk coefficient of thermal expansion and leading to lognormal extremes of the thermal stress distributions.

36 MATERIALS SCIENCE↗

Pressure-Dependent Thermal Expansion Coefficient by a Diamond Anvil Cell

A thermal expansion coefficient (αp) is an essential thermophysical quantity for high-pressure research. The thermal expansion coefficient is the volume change over the temperature in an isobaric heating process. Although isobaric heating processes for diamond anvil cell (DAC) have been conducted by keeping the pressure constant during heating, pressure determination at high-temperature high pressure is debatable for decades long. In this paper, a revertible heating/cooling approach is presented, while its pressure determination at high-temperature high pressure is not required. We report a pressure-dependent thermal expansion coefficient of MgO at 9.5 GPa by reversible heating/cooling was determined by a DAC and its result matches the one collected by a large volume press, whose isobaric heating was conducted by manually adjusting its load/pressure.

36 MATERIALS SCIENCE↗

Thermal expansion of nickel oxide.

Thermal expansion of polycrystalline nickel oxide in oxygen atmosphere with 5 percent nitrogen to 1930 degrees C, noting grain size

HIGH TEMPERATURE AIR↗

Binary, ternary and quaternary silicates of CaO, BaO and ZnO in high thermal expansion seals for solid oxide fuel cells studied by high-temperature X-ray diffraction (HT-XRD)

Highlights: Black-Right-Pointing-Pointer We examined the thermal expansion of various silicates of CaO, BaO and ZnO. Black-Right-Pointing-Pointer Thermal expansions were determined by dilatometry and high-temperature X-ray diffraction. Black-Right-Pointing-Pointer High-temperature X-ray diffraction enabled to determine anisotropic thermal expansion. Black-Right-Pointing-Pointer CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} exhibit the highest thermal expansion. Black-Right-Pointing-Pointer CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} are suitable as components in high temperature seals. -- Abstract: Gas-tight seals based on glasses suitable for joining of materials with high thermal expansion coefficients are for example required for solid-oxide fuel cells. If these seals are to be used at high temperatures, they can only be fabricated from glasses which enable the crystallization of phases with high thermal expansion coefficients. This paper reports on some components from systems suitable for high thermal expansion seals: binary calcium silicates, CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and Ca{sub 2}SiO{sub 4} zinc silicates, Zn{sub 2}SiO{sub 4}, ternary silicates of BaO, CaO and ZnO, BaCa{sub 2}Si{sub 3}O{sub 9}, Ca{sub 2}ZnSi{sub 2}O{sub 7}, and one quaternary silicate, Ba{sub 2}CaZn{sub 2}Si{sub 6}O{sub 17,} studied by high-temperature X-ray diffraction. Only CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} exhibit thermal expansion coefficients in the range suitable for high thermal expansion seals of 11.2-11.8 Multiplication-Sign 10{sup -6} K{sup -1} (100-800 Degree-Sign C). The thermal expansions strongly depend on the respective crystallographic axis. The coefficient of thermal expansion of a sealing glass is not only affected by the thermal expansions of the crystalline phases, but also by that of the residual glassy phase as well as by the elastic properties. The phase formation should carefully be controlled also with respect to aging.

36 MATERIALS SCIENCE↗

An isotropic zero thermal expansion alloy with super-high toughness

Zero thermal expansion (ZTE) alloys with high mechanical response are crucial for their practical usage. Yet, unifying the ZTE behavior and mechanical response in one material is a grand obstacle, especially in multicomponent ZTE alloys. Herein, we report a near isotropic zero thermal expansion (α l = 1.10 × 10 -6 K -1 , 260–310 K) in the natural heterogeneous LaFe 54 Co 3.5 Si 3.35 alloy, which exhibits a super-high toughness of 277.8 ± 14.7 J cm -3 . Chemical partition, in the dual-phase structure, assumes the role of not only modulating thermal expansion through magnetic interaction but also enhancing mechanical properties via interface bonding. The comprehensive analysis reveals that the hierarchically synergistic enhancement among lattice, phase interface, and heterogeneous structure is significant for strong toughness. Our findings pave the way to tailor thermal expansion and obtain prominent mechanical properties in multicomponent alloys, which is essential to ultra-stable functional materials.

36 MATERIALS SCIENCE↗

Thermal expansion of selected graphite reinforced polyimide-, epoxy-, and glass-matrix composite

The thermal expansion of three epoxy-matrix composites, a polyimide-matrix composite and a borosilicate glass-matrix composite, each reinforced with continuous carbon fibers, has been measured and compared. The expansion of a composite with a rubber toughened epoxy-matrix and P75S carbon fibers was very different from the expansion of two different single phase epoxy-matrix composites with P75S fibers although all three had the same stacking sequence. Reasonable agreement was obtained between measured thermal-expansion data and results from classical laminate theory. The thermal expansion of a material may change markedly as a result of thermal cycling. Microdamage, induced by 250 cycles between -156 C and 121 C in the graphite/polyimide laminate, caused a 53 percent decrease in the coefficient of thermal expansion. The thermal expansion of the graphite/glass laminate was not changed by 100 thermal cycles from -129 C to 38 C; however, a residual strain of about 10 x 10 to the minus 6 power was measured for the laminate tested.

Tompkins, S. S.↗

Mechanistic Insights into the Superexchange-Interaction-Driven Negative Thermal Expansion in CuO

The negative thermal expansion (NTE) in CuO is explained via electron-transfer-driven superexchange interaction. The elusive connection between the spin–lattice coupling and NTE of CuO is investigated by neutron scattering and principal strain axes analysis. The density functional theory calculations show as the temperature decreases, the continuously increasing electron transfer accounts for enhancing the superexchange interaction along [$ 10\bar{1} $], the principal NTE direction. It is further rationalized that only when the interaction along [$ 10\bar{1} $] is preferably enhanced to a certain level compared to the other competing antiferromagnetic exchange pathways can the corresponding NTE occur. Outcomes from this work have implications for controlling the thermal expansion through superexchange interaction, via, for example, optical manipulation, electron or hole doping, etc.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular reorientation of a nematic liquid crystal by thermal expansion

A unique feature of nematic liquid crystals is orientational order of molecules that can be controlled by electromagnetic fields, surface modifications and pressure gradients. Here we demonstrate a new effect in which the orientation of nematic liquid crystal molecules is altered by thermal expansion. Thermal expansion (or contraction) causes the nematic liquid crystal to flow; the flow imposes a realigning torque on the nematic liquid crystal molecules and the optic axis. The optical and mechanical responses activated by a simple temperature change can be used in sensing, photonics, microfluidic, optofluidic and lab-on-a-chip applications as they do not require externally imposed gradients of temperature, pressure, surface realignment, nor electromagnetic fields. The effect has important ramifications for the current search of the biaxial nematic phase as the optical features of thermally induced structural changes in the uniaxial nematic liquid crystal mimic the features expected of the biaxial nematic liquid crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controllable thermal expansion and magnetic structure in Er 2 (Fe,Co) 14 B intermetallic compounds

The control of thermal expansion is attractive but remains challenging for the studies of negative thermal expansion materials. Here, we report a continuously controllable thermal expansion from negative to positive by means of adjusting the magnetic moment of Fe in Er 2 (Fe,Co) 14 B intermetallic compounds. Interestingly, a zero thermal expansion (ZTE) has been achieved in a wide temperature range (ΔT = 355 K), which is larger than most existing ZTE alloys. The spontaneous magnetostriction (ω S ) reveals a negative contribution arising from the magneto-volume effect to the controllable thermal expansion. The present study could be suitable for the design of controllable thermal expansion of other alloys related to the magneto-volume effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal expansion of SiC at high pressure-temperature and implications for thermal convection in the deep interiors of carbide exoplanets

Recent astrophysical observations have shown that some stars have sufficiently high carbon-to-oxygen ratios and may host planets composed mainly of carbides instead of silicates and oxides. From the low thermal expansion of SiC at 1 bar, it can be inferred that the buoyancy force of thermal anomalies is much lower in the carbide planets than in the silicate planets. However, numerous studies have shown that high pressure in planetary interiors can fundamentally change the physical properties of materials. In this work we have measured the pressure-volume-temperature relations of two SiC polymorphs (3C and 6H) at pressures and temperatures up to 80 GPa and 1900 K and 65 GPa and 1920 K, respectively, in the laser-heated diamond anvil cell combined with synchrotron X-ray diffraction. We found no evidence of dissociations of these phases up to our maximum pressure condition, supporting the stability of SiC to 1900 km depth in Earth-size Si-rich carbide planets. Following the Mie-Grüneisen approach, we fit our data to the Birch-Murnaghan or the Vinet equations of state combined with the Debye approach. We found that the pressure-induced change in the thermal expansion parameter of SiC is much smaller than that of Mg silicate perovskite (bridgmanite). Our new measurements suggest that the thermal buoyancy force may be stronger in the deep interiors of Si-rich carbide exoplanets than in the “Earth-like” silicate planets.

58 GEOSCIENCES↗

Modeling the thermal deformation of TATB-based explosives. Part 1: Thermal expansion of “neat-pressed” polycrystalline TATB

We detail a modeling approach to simulate the anisotropic thermal expansion of polycrystalline (1,3,5-triamino-2,4,6-trinitrobenzene) TATB-based explosives that utilizes microstructural information including porosity, crystal aspect ratio, and processing-induced texture. This report, the first in a series, focuses on nonlinear thermal expansion of “neat-pressed” polycrystalline TATB specimens which do not contain any binder; additional complexities related to polymeric binder and irreversible ratcheting behavior are briefly discussed, however detailed investigation of these aspects are deferred to subsequent reports. In this work we have, for the first time, developed a mesoscale continuum model relating the thermal expansion of polycrystal TATB specimens to their microstructural characteristics. A self-consistent homogenization procedure is used to relate macroscopic thermoelastic response to the constitutive behavior of single-crystal TATB. The model includes a representation of grain aspect ratio, porosity, and crystallographic texture attributed to the consolidation process. A quantitative model is proposed to describe the evolution of preferred orientation of graphitic planes in TATB during consolidation and an algorithm constructed to develop a discrete representation of the associated orientation distribution function. Analytical and numerical solutions using this model are shown to produce textures consistent with previous measurements and characterization for isostatic and uniaxial “die-pressed” specimens. Predicted thermal strain versus temperature for textured specimens are shown to be in agreement with corresponding experimental measurements. Using the developed modeling approach, several simulations have been run to investigate the influence of microstructure on macroscopic thermal expansion behavior. Results from these simulations are used to identify qualitative trends. Implications of the identified trends are discussed in the context of thermal deformation of engineered components whose consolidation process is generally more complex than isostatic or die-pressed specimens. Finally, an envisioned application of the modeling approach to simulating thermal expansion of weapon systems and components is outlined along with necessary future work to introduce the effects of binder and ratcheting behavior. Key conclusions from this work include the following. Both porosity and grain aspect ratio have an influence on the thermal expansion of polycrystal TATB considering realistic material variability. Thepreferred orientation of the single crystal TATB [001] poles within a polycrystal gives rise to pronounced anisotropy of the macroscopic thermal expansion. The extent of this preferred orientation depends on the magnitude of deformation, and consequently, is expected to vary spatially throughout manufactured components much like porosity. The modeling approach presented here has utility toward bringing spatially variable microstructural features into macroscale system engineering modelsAbstract Not Provided

36 MATERIALS SCIENCE↗

Giant uniaxial negative thermal expansion in FeZr 2 alloy over a wide temperature range

Negative thermal expansion (NTE) alloys possess great practical merit as thermal offsets for positive thermal expansion due to its metallic properties. However, achieving a large NTE with a wide temperature range remains a great challenge. Herein, a metallic framework-like material FeZr 2 is found to exhibit a giant uniaxial (1D) NTE with a wide temperature range (93-1078 K, $\overline{α}_{l}$=–34.01×10 –6 K –1 ). Such uniaxial NTE is the strongest in all metal-based NTE materials. The direct experimental evidence and DFT calculations reveal that the origin of giant NTE is the couple with phonons, flexible framework-like structure, and soft bonds. Interestingly, the present metallic FeZr 2 excites giant 1D NTE mainly driven by high-frequency optical branches. It is unlike the NTE in traditional framework materials, which are generally dominated by low energy acoustic branches. In the present study, a giant uniaxial NTE alloy is reported, and the complex mechanism has been revealed. It is of great significance for understanding the nature of thermal expansion and guiding the regulation of thermal expansion.

36 MATERIALS SCIENCE↗

Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite

Zero thermal expansion (ZTE) alloys possess unique dimensional stability, high thermal and electrical conductivities. Their practical application under heat and stress is however limited by their inherent brittleness because ZTE and plasticity are generally exclusive in a single-phase material. Besides, the performance of ZTE alloys is highly sensitive to change of compositions, so conventional synthesis methods such as alloying or the design of multiphase to improve its thermal and mechanical properties are usually inapplicable. In this study, by adopting a one-step eutectic reaction method, we overcome this challenge. A natural dual-phase composite with ZTE and plasticity was synthesized by melting 4 atom% holmium with pure iron. The dual-phase alloy shows moderate plasticity and strength, axial zero thermal expansion, and stable thermal cycling performance as well as low cost. By using synchrotron X-ray diffraction, in-situ neutron diffraction and microscopy, the critical mechanism of dual-phase synergy on both thermal expansion regulation and mechanical property enhancement is revealed. These results demonstrate that eutectic reaction is likely to be a universal and effective method for the design of high-performance intermetallic-compound-based ZTE alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal expansion of PBX 9501 and PBX 9502 plastic-bonded explosives

Two applications of thermal expansion measurements on plastic-bonded explosive (PBX) composites are described. In the first dilatometer application, thermal expansion properties of HMX-based PBX 9501 are measured over a broad thermal range that includes glass and domain-restructuring transitions in the polymeric binder. Results are consistent with other thermal measurements and analyses performed on the composite, as well as on the binder itself. The second application used the dilatometer to distinguish the reversible and irreversible components of thermal expansion in PBX 9502, a TATB-based explosive. Irreversible expansion of the composite is believed to derive from the highly-anisotropic coefficient of thermal expansion (CTE) values measured on single T A TB crystals, although the mechanism is not well understood. Effects of specimen density, thermal ramp rate, and thermal range variation (warm first or cold first) were explored, and the results are presented and discussed. Dilatometer measurements are ongoing towards gaining insight into the mechanism(s) responsible for PBX 9502 irreversible thermal expansion.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

The impact of anisotropic thermal expansion on the isothermal annealing of polycrystalline α -uranium

Although grain growth impacts microstructural evolution in a wide variety of materials systems, the effect of anisotropic thermal expansion on grain boundary mobility and texture evolution has not been widely studied. Anisotropic thermal expansion occurs in multiple non-cubic metals, and the thermomechanical processing behavior of these materials can be better understood with further study into the impact of thermal expansion on grain boundary mobility and texture evolution. In this work, we develop a mesoscale phase field model of grain growth that includes the effect of anisotropic thermal expansion, which is applied to study polycrystalline α-uranium, a highly anisotropic metal. Three-dimensional simulations on polycrystalline a-uranium with and without thermal expansion eigenstrains are performed to study the grain boundary mobility and texture evolution as a function of temperature. A strain-free temperature of 933 K is selected, and the system is studied at within the range of 873 – 933 K at intervals of ten degrees, resulting in increasing thermal eigenstrain with decreasing temperature. We also estimate a grain boundary mobility prefactor and activation energy based on existing experimental data of isothermal annealing of α-uranium. The grain boundary mobility is found to display significant deviation from Arrhenius behavior with the inclusion of thermal expansion eigenstrain as the amount of thermal eigenstrain (and thus elastic strain energy within the system) increases. This result explains an experimentally observed grain boundary mobility deviation from Arrhenius behavior. Furthermore, the texture evolution is affected, such that the grain orientations become less random with increasing thermal eigenstrain, which could explain experimentally observed texture behavior. These results indicate that the effect of thermal expansion should be considered when predicting the thermomechanical processing behavior of α-uranium and other materials with anisotropic thermal expansion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal expansion in 3d-metal Prussian Blue Analogs-A survey study

We present a comprehensive study of the structural properties and the thermal expansion behavior of 17 different Prussian Blue Analogs (PBAs) with compositions M{sup II}{sub 3}[(M'){sup III}(CN){sub 6}]{sub 2}.nH{sub 2}O and M{sup II}{sub 2}[Fe{sup II}(CN){sub 6}].nH{sub 2}O, where M{sup II}=Mn, Fe, Co, Ni, Cu and Zn, (M'){sup III}=Co, Fe and n is the number of water molecules, which range from 5 to 18 for these compounds. The PBAs were synthesized via standard chemical precipitation methods, and temperature-dependent X-ray diffraction studies were performed in the temperature range between -150 deg. C (123 K) and room-temperature. The vast majority of the studied PBAs were found to crystallize in cubic structures of space groups Fm3-bar m, F4-bar 3m and Pm3-bar m. The temperature dependence of the lattice parameters was taken to compute an average coefficient of linear thermal expansion in the studied temperature range. Of the 17 compounds, 9 display negative values for the average coefficient of linear thermal expansion, which can be as large as 39.7x{sup 1}0{sup -6} K{sup -1} for Co{sub 3}[Co(CN){sub 6}]{sub 2}.12H{sub 2}O. All of the M{sup II}{sub 3}[Co{sup III}(CN){sub 6}]{sub 2}.nH{sub 2}O compounds show negative thermal expansion behavior, which correlates with the Irving-Williams series for metal complex stability. The thermal expansion behavior for the PBAs of the M{sup II}{sub 3}[Fe{sup III}(CN){sub 6}]{sub 2}.nH{sub 2}O family are found to switch between positive (for M=Mn, Co, Ni) and negative (M=Cu, Zn) behavior, depending on the choice of the metal cation (M). On the other hand, all of the M{sup II}{sub 2}[Fe{sup II}(CN){sub 6}].nH{sub 2}O compounds show positive thermal expansion behavior. - Graphical Abstract: The structure of Prussian Blue analogs (PBAs) consists of two types of metal centered octahedral units connected by cyanide ligand. Lattice and interstitial water molecules are present in these framework structures. All the PBAs of the M{sub 3}[Co(CN){sub 6}]{sub 2}.nH{sub 2}O family show negative thermal expansion (NTE) behavior. The lattice parameters and magnitude of NTE correlates inversely with the Irving-Williams series of metal complex stability. Highlights: > Thermal expansion behavior of 17 Prussian Blue Analogs has been studied via XRD. > Nine compounds display negative thermal expansion (NTE) behavior. > All compounds of the M{sup II}{sub 3}[Co{sup III}(CN){sub 6}]{sub 2} family exhibit NTE behavior. > Magnitude of the NTE in M{sup II}{sub 3}[Co{sup III}(CN){sub 6}]{sub 2} follows the order Mn>Fe>Co>Ni>Cu<Zn. > NTE materials show correlations with lattice parameters and Irving-Williams series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗