Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMAL CONDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

On the importance of optical phonons to thermal conductivity in nanostructures

The contribution of optical phonons to thermal conductivity has typically been ignored. However, when the system size decreases to the nanoscale regime, optical phonons are no longer negligible. The contributions of different phonon polarizations to the thermal conductivity of silicon are discussed based on the phonon lifetimes extracted from a first principles approach. The results indicate that around room temperature, optical phonons can contribute over 20% to the thermal conductivity of nanostructures as compared to 5% in bulk materials. In addition, the temperature and size dependence of the contributions from acoustic and optical phonons are fully explored.

42 ENGINEERING↗

Conducting thermal energy to the membrane/water interface for the enhanced desalination of hypersaline brines using membrane distillation

Membrane distillation (MD) is a membrane-based thermal desalination process capable of treating hypersaline brines. Standard MD systems rely on preheating the feed to drive the desalination process. However, relying on the feed to carry thermal energy is limited by a decline of the thermal driving force as the water moves across the membrane, and temperature polarization. In contrast, supplying heat directly into the feed channel, either through the membrane or other channel surfaces, has the potential of minimizing temperature polarization, increasing single-pass water recoveries, and decreasing the number of heat exchangers in the system. When solar thermal energy can be utilized, particularly if the solar heat is optimally delivered to enhance water evaporation and process performance, MD processes can potentially be improved in terms of energy efficiency, environmental sustainability, or operating costs. Here we describe an MD process using layered composite membranes that include a high-thermal-conductivity layer for supplying heat directly to the membrane-water interface and the flow channel. Here, the MD system showed stable performance with water flux up to 9 L/m 2 /hr, and salt rejection >99.9% over hours of desalinating hypersaline feed (100 g/L NaCl). In addition to bench-scale system, we developed a computational fluid dynamics model that successfully described the transport phenomena in the system.

42 ENGINEERING↗

Thermal-conductivity measurements of tungsten-fiber-reinforced superalloy composites using a thermal-conductivity comparator

The thermal conductivity (TC) of tungsten-fiber-reinforced superalloys was determined for two composite systems by using a thermal conductivity standard from the National Bureau of Standards and a comparator and technique developed for that purpose. The results were compared with TC data for the nickel-base alloy MAR-M200. The technique lends itself to applications involving thin specimens, such as thin-walled turbine blades. The TC's of the composite systems were considerably higher in both the longitudinal and transverse directions than that of the monolithic superalloys used as the matrices.

Westfall, L. J.↗

Experimental study of thermal conductivity at high pressures: Implications for the deep Earth’s interior

Lattice thermal conductivity of ferropericlase and radiative thermal conductivity of iron bearing magnesium silicate perovskite (bridgmanite) – the major mineral of Earth’s lower mantle– has been measured at room temperature up to 30 and 46 GPa, respectively, using time domain thermoreflectance and optical spectroscopy techniques in diamond anvil cells. The results provide new constraints for the pressure dependencies of the thermal conductivities of Fe bearing minerals. The lattice thermal conductivity of ferropericlase (Mg 0.9 Fe 0.1 )O is 5.7(6) W/(m*K) at ambient conditions, which is almost 10 times smaller than that of pure MgO; however, it increases with pressure much faster (6.1(7)%/GPa vs 3.6%/GPa). The radiative conductivity of Mg 0.94 Fe 0.06 SiO 3 bridgmanite single crystal agrees with previously determined values at ambient pressure; it is almost pressure-independent in the investigated pressure range. Furthermore, our results confirm the reduced radiative conductivity scenario for the Earth’s lower mantle, while the assessment of the heat flow through the core-mantle boundary still requires in situ measurements at the relevant pressure-temperature conditions.

58 GEOSCIENCES↗

Differential heating: A versatile method for thermal conductivity measurements in high-energy-density matter

We propose a method for thermal conductivity measurements of high energy density matter based on differential heating. A temperature gradient is created either by surface heating of one material or at an interface between two materials by different energy deposition. The subsequent heat conduction across the temperature gradient is observed by various time-resolved probing techniques. Conceptual designs of such measurements using laser heating, proton heating, and x-ray heating are presented. The sensitivity of the measurements to thermal conductivity is confirmed by simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using atomic layer deposited tungsten to increase thermal conductivity of a packed bed

This study investigated the effective thermal conductivity (k{sub eff}) of packed-beds that contained porous particles with nanoscale tungsten (W) films of different thicknesses formed by atomic layer deposition (ALD). A continuous film on the particles is vital towards increasing k{sub eff} of the packed beds. For example, the k{sub eff} of an alumina packed bed was increased by three times after an ∼8-nm continuous W film with 20 cycles of W ALD, whereas k{sub eff} was decreased on a polymer packed bed with discontinuous, evenly dispersed W-islands due to nanoparticle scattering of phonons. For catalysts, understanding the thermal properties of these packed beds is essential for developing thermally conductive supports as alternatives to structured supports.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conduction in a composite circular cylinder - A new technique for thermal conductivity measurements of lunar core samples

A technique is described for the measurement of the thermal conductivity of lunar core samples. According to their technique, the core sample is heated radiatively from the outside at a known rate, the temperature is measured at the surface of the core-tube, and the thermal conductivity of the sample is determined by comparing the measured temperature with the theory. The corresponding problems for a composite slab or sphere were solved and the solutions are presented for possible future application to the thermal conductivity measurements. The experimental apparatus construction and procedure are examined as well as the number of precautions taken to preserve the sample from disturbances and to improve the measurement results.

Horal, K.↗

First-principles investigations on ionization and thermal conductivity of polystyrene for inertial confinement fusion applications

Using quantum molecular-dynamics (QMD) methods based on the density functional theory, we have performed first-principles investigations of the ionization and thermal conductivity of polystyrene (CH) over a wide range of plasma conditions (ρ = 0.5 to 100 g/cm{sup 3} and T = 15 625 to 500 000 K). The ionization data from orbital-free molecular-dynamics calculations have been fitted with a “Saha-type” model as a function of the CH plasma density and temperature, which gives an increasing ionization as the CH density increases even at low temperatures (T < 50 eV). The orbital-free molecular dynamics method is only used to gauge the average ionization behavior of CH under the average-atom model in conjunction with the pressure-matching mixing rule. The thermal conductivities (κ{sub QMD}) of CH, derived directly from the Kohn–Sham molecular-dynamics calculations, are then analytically fitted with a generalized Coulomb logarithm [(lnΛ){sub QMD}] over a wide range of plasma conditions. When compared with the traditional ionization and thermal conductivity models used in radiation–hydrodynamics codes for inertial confinement fusion simulations, the QMD results show a large difference in the low-temperature regime in which strong coupling and electron degeneracy play an essential role in determining plasma properties. Hydrodynamic simulations of cryogenic deuterium–tritium targets with CH ablators on OMEGA and the National Ignition Facility using the QMD-derived ionization and thermal conductivity of CH have predicted ∼20% variation in target performance in terms of hot-spot pressure and neutron yield (gain) with respect to traditional model simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Infrared Detector System with Controlled Thermal Conductance

A thermal infrared detector system includes a heat sink, a support member, a connection support member connecting the support member to the heat sink and including a heater unit is reviewed. An infrared detector element is mounted on the support member and a temperature signal representative of the infrared energy contacting the support member can then be derived by comparing the temperature of the support member and the heat sink. The temperature signal from a support member and a temperature signal from the connection support member can then be used to drive a heater unit mounted on the connection support member to thereby control the thermal conductance of the support member. Thus, the thermal conductance can be controlled so that it can be actively increased or decreased as desired.

Cunningham, Thomas J.↗

Efficient Reformulation of HOTFGM: Heat Conduction with Variable Thermal Conductivity

Functionally graded materials (FGMs) have become one of the major research topics in the mechanics of materials community during the past fifteen years. FGMs are heterogeneous materials, characterized by spatially variable microstructure, and thus spatially variable macroscopic properties, introduced to enhance material or structural performance. The spatially variable material properties make FGMs challenging to analyze. The review of the various techniques employed to analyze the thermodynamical response of FGMs reveals two distinct and fundamentally different computational strategies, called uncoupled macromechanical and coupled micromechanical approaches by some investigators. The uncoupled macromechanical approaches ignore the effect of microstructural gradation by employing specific spatial variations of material properties, which are either assumed or obtained by local homogenization, thereby resulting in erroneous results under certain circumstances. In contrast, the coupled approaches explicitly account for the micro-macrostructural interaction, albeit at a significantly higher computational cost. The higher-order theory for functionally graded materials (HOTFGM) developed by Aboudi et al. is representative of the coupled approach. However, despite its demonstrated utility in applications where micro-macrostructural coupling effects are important, the theory's full potential is yet to be realized because the original formulation of HOTFGM is computationally intensive. This, in turn, limits the size of problems that can be solved due to the large number of equations required to mimic realistic material microstructures. Therefore, a basis for an efficient reformulation of HOTFGM, referred to as user-friendly formulation, is developed herein, and subsequently employed in the construction of the efficient reformulation using the local/global conductivity matrix approach. In order to extend HOTFGM's range of applicability, spatially variable thermal conductivity capability at the local level is incorporated into the efficient reformulation. Analytical solutions to validate both the user-friendly and efficient reformulations am also developed. Volume discretization sensitivity and validation studies, as well as a practical application of the developed efficient reformulation are subsequently carried out. The presented results illustrate the accuracy and implementability of both the user-friendly formulation and the efficient reformulation of HOTFGM.

Zhong, Yi↗

Thermal conductivity in self-assembled CoFe 2 O 4 /BiFeO 3 vertical nanocomposite films

The thermal conductivity of self-assembled nanocomposite oxide films consisting of cobalt ferrite (CFO) spinel pillars grown within a single-crystal bismuth ferrite (BFO) perovskite matrix is described as a function of the volume fraction of the spinel. Single phase BFO and CFO had cross-plane thermal conductivities of 1.32 W m –1 K –1 and 3.94 W m –1 K –1 , respectively, and the thermal conductivity of the nanocomposites increased with the CFO volume fraction within this range. A small increase (~5%) in thermal conductivity for the pure CFO phase in the AC-demagnetized state was observed, suggesting possible magnon contributions. As a result, steady state gray-medium based variance-reduced Monte Carlo simulations show consistent trends with experimental data on the dependence of thermal conductivity with the CFO volume fraction.

36 MATERIALS SCIENCE↗

Thermal conductivity of Er{sup +3}:Y{sub 2}O{sub 3} films grown by atomic layer deposition

Cross-plane thermal conductivity of 800, 458, and 110 nm erbium-doped crystalline yttria (Er{sup +3}:Y{sub 2}O{sub 3}) films deposited via atomic layer deposition was measured using the 3ω method at room temperature. Thermal conductivity results show 16-fold increase in thermal conductivity from 0.49 W m{sup −1}K{sup −1} to 8 W m{sup −1}K{sup −1} upon post deposition annealing, partially due to the suppression of the number of the -OH/H{sub 2}O bonds in the films after annealing. Thermal conductivity of the annealed film was ∼70% lower than undoped bulk single crystal yttria. The cumulative interface thermal resistivity of substrate-Er{sup +3}:Y{sub 2}O{sub 3}-metal heater was determined to be ∼2.5 × 10{sup −8} m{sup 2} K/W.

36 MATERIALS SCIENCE↗

Six Quaternary Chalcogenides of the Pavonite Homologous Series with Ultralow Lattice Thermal Conductivity

Six new quaternary chalcogenides belonging to the pavonite sulfosalt mineral family with the general formula M n+1 (Bi/ Sb) 2 Q n+5 (n = 2-7) were synthesized by direct reactions of the elements at high temperatures. The compounds include InPbBi 3 S 7 (n = 2), In 0.5 Mn 2 Bi 3.5 Se 8 (n = 3), CdPb 2 Bi 4 S 9 (n = 4), Ag 1.5 CdBi 5.5 Se 10 (n = 5), Ag 2 CdBi 6 Se 11 (n = 6), and Ag 2.5 CdSb 6.5 Se 12 (n = 7) and crystallized in the monoclinic space group C2/m. The pavonite structure consists of two alternating slabs, a thinner slab composed of pairs of monocapped trigonal prisms separated by octahedra and a thicker slab with a galena-like structure motif. In the general formula, n corresponds to the number of octahedra along the diagonal direction of the galena-like slab. The complex compositions, mixed occupancies of the cations, and quasi-two-dimensional structures endow compounds of this family with extremely low thermal conductivity. Here, the charge and thermal transport properties of CdPb 2 Bi 4 S 9 and CdAg 2 Bi 6 Se 11 were characterized from 300 to 810 K, and both materials exhibited n-type semiconductor behaviors and ultralow lattice thermal conductivities of less than 0.35 W·m –1 ·K –1 for CdAg 2 Bi 6 Se 11 and 0.73 W·m –1 ·K –1 for CdPb 2 Bi 4 S 9 in the measured temperature range. Density functional theory calculations revealed the origins of this low lattice thermal conductivity to be a combination of the low Debye temperature, small phonon velocities, and large Grüneisen parameters. Thermoelectric properties were measured, and the highest ZT values of 0.53 and 0.95 for undoped CdPb 2 Bi 4 S 9 and CdAg 2 Bi 6 Se 11 , respectively, were attained at 775 K.

36 MATERIALS SCIENCE↗