SEARCH · Engineering Papers

Results for “System dependency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Test bed experiments for various telerobotic system characteristics and configurations

Dexterous manipulation and grasping in telerobotic systems depends on the integration of high-performance sensors, displays, actuators and controls into systems in which careful consideration has been given to human perception and tolerance. Research underway at the Wisconsin Center for Space Automation and Robotics (WCSAR) has the objective of enhancing the performance of these systems and their components, and quantifying the effects of the many electrical, mechanical, control, and human factors that affect their performance. This will lead to a fundamental understanding of performance issues which will in turn allow designers to evaluate sensor, actuator, display, and control technologies with respect to generic measures of dexterous performance. As part of this effort, an experimental test bed was developed which has telerobotic components with exceptionally high fidelity in master/slave operation. A Telerobotic Performance Analysis System has also been developed which allows performance to be determined for various system configurations and electro-mechanical characteristics. Both this performance analysis system and test bed experiments are described.

Duffie, Neil A.↗

NASA NTRS2018

IV&V Planning & Execution Initiative

Independent verification and validation (IV&V) is a systems engineering discipline which seeks to provide confidence that mission-critical software-dependent systems will operate safely and achieve all mission objectives. In order to optimize application of IV&V resources, it is necessary to identify specific assurance objectives that are most likely to reveal difficulty and therefore to increase confidence. Software assurance literature deals predominantly with the code itself. However, our experience is that the most significant software-related issues are discovered via analysis of other system artifacts such as operations concepts, requirements and design. Consequently, it is desirable to, when assessing risk and defining assurance objectives, consider all facets of the software system architecture. We describe in this presentation progress and lessons learned from an IV&V capability development initiative to enhance the IV&V project planning process using all available architecture information.

Risk↗

NASA NTRS1971

Remote coupling of air lines

Bullseye coupler is projected pneumatically from one railroad car at the second car's point of connection. System depends on assumption that inaccuracies in relative position of cars do not exceed certain limits. System is usefull to oil drilling, marine rescue and salvage, nuclear work and chemical plant operations.

Fuchs, C. E.↗

DOE OSTI2024

The effect of temperature oscillations on energy storage rectification in harmonic systems

Abstract Rectification, the preferential transport of a current in one direction through a system, has garnered significant attention in molecules because of its importance for controlling thermal and electronic currents at the nanoscale. Here, we report the presence of energy storage rectification effects in a molecular chain. This phenomenon is generated by subjecting a harmonic molecular chain to an oscillating temperature gradient and showing that the energy absorption rate of the system depends on the direction of the gradient. We examine how the energy storage rectification ratios in the chain are affected by the oscillating gradient, asymmetry in the chain, and the system parameters. We find that energy storage rectification can be observed in harmonic lattice structures with time-dependent temperatures and that, correspondingly, anharmonicity is not required to generate this rectification mechanism in such systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Novel machine-learning method for spin classification of neutron resonances

The performance of nuclear reactors and other nuclear systems depends on a precise understanding of the neutron interaction cross sections for materials used in these systems. These cross sections exhibit resonant structure whose shape is determined in part by the angular-momentum quantum numbers of the resonances. The correct assignment of the quantum numbers of neutron resonances is, therefore, paramount. In this project, we apply machine learning to automate the quantum number assignments using only the resonances' energies and widths and not relying on detailed transmission or capture measurements. The classifier used for quantum number assignment is trained using stochastically generated resonance sequences whose distributions mimic those of real data. Here we explore the use of several physics-motivated features for training our classifier. These features amount to out-of-distribution tests of a given resonance's widths and resonance-pair spacings. We pay special attention to situations where either capture widths cannot be trusted for classification purposes or where there is insufficient information to classify resonances by the total spin J. We demonstrate the efficacy of our classification approach using simulated and actual 52 Cr resonance data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Machine learning applied to classifying neutron resonances

The performance of nuclear reactors and other nuclear systems depends on a precise understanding of the neutron interaction cross sections for materials used in these systems. These cross sections exhibit resonance structure whose shape is determined in part by the angular momentum quantum numbers of the resonances. The correct assignment of the quantum numbers of neutron resonances is therefore of paramount importance. In this project, we apply a machine learning technique, namely decision trees, to automate the quantum number assignments. The tree is trained from simulated data generated to mimic the errors found in real data. We explore the use of several physics-motivated features for training our trees, including the nearest neighbor spacing distribution, cumulative level distribution, and channel width distributions. Initial results using random matrix theory motivated fits which demonstrated that we can determine resonance spin groups somewhat reliably. If we use these fits as features in our trees, we can train them to spot outliers corresponding to misassigned resonances. We found that with the large number of features used in this project that the decision tree tended to over t training data resulting in poor performance with respect to the test data. By reducing the number of features, we can achieve nearly perfect assignment of quantum numbers with our training data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Machine Learning for Neutron Resonance Evaluations [Slides]

The performance of nuclear reactors and other nuclear systems depends on a precise understanding of the neutron interaction cross sections for materials used in these systems. These cross sections exhibit a resonance structure whose shape is determined in part by the angular momentum quantum numbers of the resonances. The correct assignment of the quantum numbers of neutron resonances is therefore of paramount importance. In this presentation, we describe the application of machine learning to automate the quantum number assignments. Scikit-learn classifiers were trained on simulated resonance data whose statistical properties were chosen to mimic real data. We explored the use of several physics (and random matrix theory)-motivated features for training the classifiers, including the nearest neighbor spacing distribution, cumulative level distribution, and channel width distributions. Initial results demonstrated that we can determine resonance spin groups somewhat reliably. We are now investigating the application of our approach to 52 Cr resonance data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS2006

Managing Analysis Models in the Design Process

Design of large, complex space systems depends on significant model-based support for exploration of the design space. Integrated models predict system performance in mission-relevant terms given design descriptions and multiple physics-based numerical models. Both the design activities and the modeling activities warrant explicit process definitions and active process management to protect the project from excessive risk. Software and systems engineering processes have been formalized and similar formal process activities are under development for design engineering and integrated modeling. JPL is establishing a modeling process to define development and application of such system-level models.

design↗

NASA NTRS2014

SSL Freeform Generator v1.00

The Orion spacecraft utilizes a system of Compact Unique Identifiers (CUIs) to identify telemetry measurements in the process of communicating with the ground. While avionic systems are still in development, simulation of telemetric data must be used for the development of dependent systems. The SuperScript Language (SSL) developed by Honeywell Aerospace provides users a programming language for simulation of this data. The use of tools that provide SSL generation capabilities at a higher level allows for faster and more efficient generation of simulation waveforms. Previous SSL Generator implementations such as Orion Scripted Interface Generator (OrionSIG) relied on software supported routines to generate simulation points for the SSL scripts. This provided relevant simulation capabilities, but was reduced in flexibility by the available software routines available. For this approach, software supported routines have been entirely dropped. Rather, the user is required to enter their own simulation waveform input. This allows arbitrarily complex functions to be utilized simulated with maximum degree of freedom for the user.: The idea for this version of the SSL Generator was a mapping of arbitrary waveforms to Orion CUI telemetry data. The SSL Generator implemented offers a higher degree of freedom to the user than previous versions while attempting to maintain abstraction from the underlying SSL script and the Orion CUI data types. As such, many mappings of waveforms to CUIs will simply not work. Certain implementation decisions were made to minimize the damage caused by these unintended side-effects, such as saturation of values exceeding the maximum or minimum bounds of the data type. Other details, such as signed values being represented in unsigned data types, present problems which cant be fixed to an acceptable degree of intended behavior without user input. Awareness of the limitations of all layers of the software stack will increase the productivity of the end-user.

telemetry↗

DOE OSTI2021

Spin and Accretion Rate Dependence of Black Hole X-Ray Spectra

We present a survey of how the spectral features of black hole X-ray binary systems depend on spin, accretion rate, viewing angle, and Fe abundance when predicted on the basis of first-principles physical calculations. The power-law component hardens with increasing spin. The thermal component strengthens with increasing accretion rate. The Compton bump is enhanced by higher accretion rate and lower spin. The Fe Kα equivalent width grows sublinearly with Fe abundance. Strikingly, the Kα profile is more sensitive to accretion rate than to spin because its radial surface brightness profile is relatively flat, and higher accretion rate extends the production region to smaller radii. The overall radiative efficiency is at least 30%–100% greater than as predicted by the Novikov–Thorne model.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2021

Spin and Accretion Rate Dependence of Black Hole X-Ray Spectra

Brooks E Kinch↗

DOE OSTI2020

Cost and Performance Requirements for Flexible Advanced Nuclear Plants in Future U.S. Power Markets

Advanced reactor developers are at various stages of commercializing new products and must design for future market environments that will exist when their plants are available. It is therefore critical to have a clear understanding about what plants will need to cost to be attractive investments, and what performance characteristics will create the most value for plant owners. This study is among the first to model the substantial contribution that flexible advanced reactors can make towards reliable, responsive, affordable, and clean future energy systems by supplying clean dispatchable generating capacity. Advanced reactor technologies could make a major contribution to lowering the overall system cost while reducing emissions and improving the performance of future energy systems. Depending on specific market conditions, it may also be beneficial to co-locate thermal energy storage systems (ESS).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1990

Effect of a crystal-melt interface on Taylor-vortex flow

The linear stability of circular Couette flow between concentric infinite cylinders is considered for the case that the stationary outer cylinder is a crystal-melt interface rather than a rigid surface. A radial temperature difference is maintained across the liquid gap, and equations for heat transport in the crystal and melt phases are included to extend the ordinary formulation of this problem. The stability of this two-phase system depends on the Prandtl number. For small Prandtl number the linear stability of the two-phase system is given by the classical results for a rigid-walled system. For increasing values of the Prandtl number, convective heat transport becomes significant and the system becomes increasingly less stable. Previous results in a narrow-gap approximation are extended to the case of a finite gap, and both axisymmetric and nonaxisymmetric disturbance modes are considered. The two-phase system becomes less stable as the finite gap tends to the narrow-gap limit. The two-phase system is more stable to nonaxisymmetric modes with azimuthal wavenumber n = 1; the stability of these n = 1 modes is sensitive to the latent heat of fusion.

Mcfadden, G. B.↗

NASA NTRS1992

Appraisal of digital terrain elevation data for low-altitude flight

The use of terrain elevation databases in advanced guidance and navigation systems has greatly expanded. However, the limitations and accuracies of these databases must be considered and established prior to safe system flight evaluation. A simple approach to quantify reasonable flight limits is presented and evaluated for a helicopter guidance system dependent on a terrain database. The flight test evaluated involved a helicopter equipped with a Global Positioning System (GPS) receiver and radar altimeter, and a ground station GPS receiver which provided improved helicopter positioning. The precision navigation and radar altimeter data was acquired while flying low-altitude missions in south-central Pennsylvania. The aircraft-determined terrain elevations were compared with the terrain predicted by the Defense Mapping Agency (DMA) Level 1 terrain elevation data for the same area. The results suggest a safe set clearance altitude of 220 ft for flight testing of a DMA-based guidance avionic in the same area.

Zelenka, Richard E.↗

NASA NTRS1992

Appraisal of digital terrain elevation data for low-altitude flight

Zelenka, Richard E.↗

DOE OSTI2021

Optimal renormalization of multiscale systems

While model order reduction is a promising approach in dealing with multi-scale time-dependent systems that are too large or too expensive to simulate for long times, the resulting reduced order models can suffer from instabilities. We have recently developed a time-dependent renormalization approach to stabilize such reduced models. In the current work, we extend this framework by introducing a parameter that controls the time-decay of the memory of such models and optimally selecting this parameter based on limited fully resolved simulations. First, we demonstrate our framework on the inviscid Burgers equation whose solution develops a finite-time singularity. Our renormalized reduced order models are stable and accurate for long times while using for their calibration only data from a full order simulation before the occurrence of the singularity. Furthermore, we apply this framework to the 3D Euler equations of incompressible fluid flow, where the problem of finite-time singularity formation is still open and where brute force simulation is only feasible for short times. Our approach allows us to obtain for the first time a perturbatively renormalizable model which is stable for long times and includes all the complex effects present in the 3D Euler dynamics. We find that, in each application, the renormalization coefficients display algebraic decay with increasing resolution, and that the parameter which controls the time-decay of the memory is problem-dependent.

Price, Jacob↗

DOE OSTI2024

Bubble Mass Transport Measurement in the Large-Scale Test Loops at Oak Ridge National Laboratory

Molten salts are complex fluids that incorporate multi-phase behavior depending on the chemistry and the physical properties of the entrained components. These components include the carrier salt, the actinide fuel, and fission, activation, and corrosion products, the concentrations of which depends on the burnup history of the salt. Radionuclide transport from the salt into the cover gas / off-gas system depends on volatility as predicted by thermochemistry, but data from the Molten Salt Reactor Experiment (MSRE) conducted in the late 1960s suggest that bubble formation and transport are also important. Anomalously high fractions of noble metals were found in the off-gas system and were attributed to transportation with parent salt aerosols and their association with rising noble gas bubbles. The prediction of such phenomena requires coupled neutronic, thermal hydraulic, and chemical equilibrium calculations, the framework of which is being developed within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program supported by the US Department of Energy (DOE) Office of Nuclear Energy (NE). However, separate effects tests and models of experiments using tools such as SAM and Thermochimica can guide model developers through important processes. Conversely, model development guides the choice of experiments and systems to provide data that are relevant for validation. This report describes several experiments that tracked gas transport in molten salts, ranging from small-scale systems to large-scale loops. Gas transportation in a molten salt, LiCl-KCl, has been studied using the shadowgraph technique. Sensors such as residual gas analysis, Raman spectroscopy, and laser-induced breakdown spectroscopy have been tested for off-gas measurements. These data were used to interpret how the gases move through the upstream salt / cover gas and the interface between them. Differential pressure measurements were able to detect individual gas bubbles as they popped at the liquid–gas interface. Salt aerosols were collected on a cascade impactor. Their formation was also observed directly via the shadowgraph method, and most of these aerosols were launched ballistically into the cover gas. Fine mists could also be observed. Convection currents through the salt were visualized and can be used to calculate the thermophysical properties of the salt itself. The apparatuses described in this report and in a previous work (McFarlane et al. 2023) have been commissioned and are available for use in making further measurements of salt/surrogate fission product behavior. Novel approaches using neutron imaging are planned for the study of fluoride salts, which cannot be contained in quartz, so shadowgraph visualization is not available. Bubble transport in convective flow and in a slow-moving salt column are planned. The mobile laser-induced breakdown spectroscopy (LIBS) system is available for several applications, including iodine capture in a molten hydroxide scrubber, H2 transport though molten salts to complement Raman analysis, and online tracking of salt aerosol generation, transport, and deposition. This report summarizes the findings from FY24 and the plans for FY25. The work completes milestone M2AT-24OR0702013 of the DOE-NE Advanced Reactor Technology, Molten Salt Reactor Campaign, DOE-NE-5.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Dynamic, Adaptive, Systems and Materials: Complex, Simple and Emergent Behaviors

This program has been funded by DoE/BES for twenty years. It has moved into and out of various subjects as it has developed, but it has retained its focus on complexity and complex systems. The project has evolved in the following way: Self-Assembly and Biomimetic Self-Assembly: All self-assembling systems depend upon a minimum of two types of interaction: a repulsion and an attraction. For the familiar molecular systems, attractive interactions are typically hydrogen bonds and electrostatic interactions. Repulsive interactions include steric effects, hydrophobic effects (in biological systems), and charge-charge repulsion. We have expanded this repertoire to include surface interactions, magnetic interactions, and others. I list these systems in the order in which we have explored them: i) A key emphasis in current work is in understanding how the movement of ions in a magnetic field (the Lorentz effect) interacts with catalytic systems. We have demonstrated that an acceleration in rate of reduction of CO 2 to CO can be accomplished by applying an external magnetic field. This acceleration is largely due to the application of the Lorentz effect on mass transport at the catalyst’s surface. ii) We have also extensively explored the influence of electrostatics, as exhibited in self-assembling systems, by tribocharging. iii) Another key system involves surface tension effects; examples include interactions between heavy particles floating at a liquid-air interface, and interacting by changes in surface area; interactions of bubbles and bubble rafts, behaviors of bubble trains in microfluidic networks, and behaviors of microorganisms in constraining environments. iv) This work has intentionally de-emphasized biological systems; but it does include some work on protein-ligand interactions and interactions among microorganisms. v) We have also explored applications of some of these effects, these explorations include bubble rafts as diffraction gratings, exploration of the structures that can be obtained by tribocharging and uses of these structures in exploring nucleation and melting of crystals. vi) Although not a major focus of this work, several other topics have emerged and offer opportunities for future work. These include the behavior of bubble trains and bubble rafts in microfluidic systems. A particularly interesting example is the formation of bubble trains that repeat in the alteration of large and small bubbles according to rules we do not presently understand, but are uniquely large-period oscillating systems. These systems offer a new route into understanding the instabilities of the type represented by oscillations. vii) We have also begun exploratory projects on magnetic levitation (especially to determine molecular density), and information storage (in molecules). Magnetic Levitation: Self-assembling and biomimetic systems require both attraction and repulsion. We have used electrostatics (tribocharging), interfacial free-energies (surface tension and related forces) and others. Potential uses include reconfigurable diffraction gratings and liquid lenses; exploration of mechanisms in tribocharging; tunneling in EGaIn junctions; and bubble trains (especially in micro-fluidic systems). Examples of systems representing these topics is included in the following papers: Complexity: Disks rotating at a water-air interface; Benard-Marangoni effects; Vortex-Crystals from spinning magnetic disks (Marangoni effects); EGaIn Electrode to study quantum tunneling; Self-Assembly of electrostatically-charged metallic spheres (electrets); Dynamically reconfigurable lens; Using computational designs of ligands for enzymes; Electrostatic self-assembly by tribocharging; Monodisperse bubble trains in microchannel systems; Inverted dripping faucet; Flames; Printing of micro-organisms to regenerate the “ink” of printing device; Using micro-organisms to move loads (“microoxen”); Motion of bacterial swarms near surfaces; Making monodisperse particles in microfluidic systems; Coding/decoding of information stored in droplet trains in microfluidic networks; Magnetic levitation; and Information storage. i) Tribocharging. The change in focus of this work on electrets from the fundamentals of charging to applications of these materials in studying self-assembly using electrostatic interactions. ii) Bubbles in Microchannels. The realization that systems of bubbles in microchannels represented a major opportunity to study complexity in a very tractable system, and the development of a semi-quantitative theory of this subject. iii) Flames. The growth of “flames” remains an exploratory subject for the research, although their currently relatively little active work involving it ongoing. iv) Systems with Microorganisms. The removal of work in biological systems from this project. Based on work supported in this program, we now have a significant project on the development of microfluidic tools for studying C. elegans (a nematode), but this work was not appropriate for a program focused on complexity, and we developed separate support for it. (It is, however, an example of successful seeding of a new area by BES.) The work on electrets has gone through a period in which a part of the program was the subject of a MURI; the focus of this work was to develop materials that did not charge electrostatically on friction or contact. The MURI is now over, and the work on dynamic self-assembly (supported by BES) is the major focus. “Flames” has also enjoyed synergistic support, in terms of a project supported by DARPA on flame suppression (in the absence of extinguishing agents, using acoustic and electrostatic interactions). This work was helpful in understanding some of the basics of flames, but is entirely distinct from the BES focus in complexity. A growing interest is in the Lorentz effect. The Lorentz effect is the force exerted on charged particles (electrons, ions, charged molecules) when they move through a perpendicular magnetic field. The Lorentz effect is almost ubiquitous in modern technology: examples of applications include electric motors, dynamos, cathode ray tubes, many batteries, and most systems that control electrical currents with magnetic forces. We have begun to explore the Lorentz effect in electrochemical systems and heterogeneous catalytic systems involving charged organic species and inorganic ions. This work is still at an early stage, but initial studies that Lorentz effects can be large when ions move through magnetic fields, or magnetic fields move in the presence of ions.

36 MATERIALS SCIENCE↗