SEARCH · Engineering Papers

Results for “Stokes equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Some observations on a new numerical method for solving Navier-Stokes equations

An explicit-implicit technique for solving Navier-Stokes equations is described which, is much less complex than other implicit methods. It is used to solve a complex, two-dimensional, steady-state, supersonic-flow problem. The computational efficiency of the method and the quality of the solution obtained from it at high Courant-Friedrich-Lewy (CFL) numbers are discussed. Modifications are discussed and certain observations are made about the method which may be helpful in using it successfully.

Kumar, A.↗

NASA NTRS1985

Algorithms for the Euler and Navier-Stokes equations for supercomputers

The steady state Euler and Navier-Stokes equations are considered for both compressible and incompressible flow. Methods are found for accelerating the convergence to a steady state. This acceleration is based on preconditioning the system so that it is no longer time consistent. In order that the acceleration technique be scheme-independent, this preconditioning is done at the differential equation level. Applications are presented for very slow flows and also for the incompressible equations.

Turkel, E.↗

NASA NTRS1985

Algorithms for the Euler and Navier-Stokes equations for supercomputers

Turkel, E.↗

NASA NTRS1989

Analysis of regularized Navier-Stokes equations, 2

A practically important regularization of the Navier-Stokes equations was analyzed. As a continuation of the previous work, the structure of the attractors characterizing the solutins was studied. Local as well as global invariant manifolds were found. Regularity properties of these manifolds are analyzed.

Ou, Yuh-Roung↗

NASA NTRS1987

An implicit flux-split algorithm for the compressible Navier-Stokes equations

An implicit upwind scheme for the compressible Navier-Stokes equations is described and applied to the internal flow in a dual-throat nozzle. The method is second-order accurate spatially and naturally dissipative. A spatially-split approximate factorization method is used to obtain efficient steady-state solutions on the NASA Langley VPS-32 (CYBER 205) supercomputer.

Thomas, James L.↗

NASA NTRS1989

The solution of the Navier-Stokes equations using Gauss-Seidel line relaxation

The Navier-Stokes equations in an implicit flux-split difference formulation are solved numerically using a Gauss-Seidel line-relaxation procedure. Particular attention is given to the selection of flux-vector splitting method and flux splitting in boundary layers. Results for sample problems involving (1) turbulent supersonic flow over a cone and (2) the viscous hypersonic flow of a chemically reacting gas in thermal nonequilibrium past a blunted cone are presented in extensive graphs and briefly characterized. The present flux-split procedures are shown to provide accurate shear-layer calculations.

Maccormack, Robert W.↗

NASA NTRS1974

A finite element solution algorithm for the Navier-Stokes equations

A finite element solution algorithm is established for the two-dimensional Navier-Stokes equations governing the steady-state kinematics and thermodynamics of a variable viscosity, compressible multiple-species fluid. For an incompressible fluid, the motion may be transient as well. The primitive dependent variables are replaced by a vorticity-streamfunction description valid in domains spanned by rectangular, cylindrical and spherical coordinate systems. Use of derived variables provides a uniformly elliptic partial differential equation description for the Navier-Stokes system, and for which the finite element algorithm is established. Explicit non-linearity is accepted by the theory, since no psuedo-variational principles are employed, and there is no requirement for either computational mesh or solution domain closure regularity. Boundary condition constraints on the normal flux and tangential distribution of all computational variables, as well as velocity, are routinely piecewise enforceable on domain closure segments arbitrarily oriented with respect to a global reference frame.

Baker, A. J.↗

NASA NTRS1976

Derivation of the Navier-Stokes equation

The proposed approach to the derivation of the Navier-Stokes equation is thought to be more plausible and easier to understand than other derivations that can be found in works on fluid mechanics. The tensor character of the stress is central to the derivation. In particular, a linear relation between stress and strain rate is assumed only for the shear, rather than for the full stress tensor as is done in most other derivations. An assumption for the shear is naturally simpler and easier to verify experimentally. The use of tensor analysis is shown to greatly simplify the derivation.

Deissler, R. G.↗

NASA NTRS1981

Multigrid solution of the Navier-Stokes equations on nonuniform grids

The numerical solution of the Navier-Stokes equations in general two dimensional domains is considered. A proper finite difference approximation to the governing equations, on nonstaggered grids, in a transformed plane is formulated. Several aspects of a multigrid method for the solution of the finite difference equations are described. The efficiency of some relaxation schemes and the transfer among the grids which are nonuniform in the physical plane are emphasized.

Fuchs, L.↗

NASA NTRS1983

Code Solves Three-Dimensional Navier-Stokes Equations

Set of computer codes solves three-dimensional Navier-Stokes equations for flow over nonaxisymmetric nozzles. Codes compute internal and external viscous flowfield about isolated nozzle, so flow characteristics and performance of three-dimensional jet engine exhaust nozzles can be predicted. Programs written in FORTRAN IV and ASSEMBLER.

Thomas, P.↗

NASA NTRS1991

Steady and unsteady solutions of the incompressible Navier-Stokes equations

An algorithm for the solution of the incompressible Navier-Stokes equations in three-dimensional generalized curvilinear coordinates is presented. The algorithm can be used to compute both steady-state and time-dependent flow problems. The algorithm is based on the method of artificial compressibility and uses a third-order flux-difference splitting technique for the convective terms and the second-order central difference for the viscous terms. The accuracy is obtained in the numerical solutions by subiterating the equations in pseudotime for each physical time step. The equations are solved with a line-relaxation scheme that allows the use of very large pseudotime steps leading to fast convergence for steady-state problems as well as for the subiterations of time-dependent problems. The steady-state solution of flow through a square duct with a 90-deg bend is computed, and the results are compared with experimental data. Good agreement is observed. Computations of unsteady flow over a circular cylinder are presented and compared to other experimental and computational results. Finally, the flow through an artificial heart configuration with moving boundaries is calculated and presented.

Rogers, Stuart E.↗

NASA NTRS1992

Acoustic analysis using numerical solutions of the Navier-Stokes equations

Numerical solutions of the time-dependent compressible Navier-Stokes equations are employed to analyze the unsteady features of jet flows which contribute to jet noise. The turbulent-mass flux spectra are examined in detail in the numerical analysis, and MacCormack's explicit finite difference algorithm is used to solve the governing equations. The computational grid is based on an axisymmetric jet with simple exponential stretching used to optimize the resolution of critical unsteady flow features. The time-varying numerical data are analyzed, and the time averages of the velocity and turbulence-intensity profiles are shown to agree with experimental data. Grid refinement and longer run times improved the prediction of the experimental mass-flux spectra. The numerical procedure can be extended to 3D jet-flow configurations to study the related 3D unsteady flow features.

Scott, James N.↗

NASA NTRS1996

A mixed volume grid approach for the Euler and Navier-Stokes equations

An approach for solving the compressible Euler and Navier-Stokes equations upon meshes composed of nearly arbitrary polyhedra is described. Each polyhedron is constructed from an arbitrary number of triangular and quadrilateral face elements, allowing the unified treatment of tetrahedral, prismatic, pyramidal, and hexahedral cells, as well the general cut cells produced by Cartesian mesh approaches. The basics behind the numerical approach and the resulting data structures are described. The accuracy of the mixed volume grid approach is assessed by performing a grid refinement study upon a series of hexahedral, tetrahedral, prismatic, and Cartesian meshes for an analytic inviscid problem. A series of laminar validation cases are made, comparing the results upon differing grid topologies to each other, to theory, and experimental data. A computation upon a prismatic/tetrahedral mesh is made simulating the laminar flow over a wall/cylinder combination.

Coirier, William J.↗

NASA NTRS1996

Krylov Subspace and Multigrid Methods Applied to the Incompressible Navier-Stokes Equations

We consider numerical solution methods for the incompressible Navier-Stokes equations discretized by a finite volume method on staggered grids in general coordinates. We use Krylov subspace and multigrid methods as well as their combinations. Numerical experiments are carried out on a scalar and a vector computer. Robustness and efficiency of these methods are studied. It appears that good methods result from suitable combinations of GCR and multigrid methods.

Vuik, C.↗

NASA NTRS2001

Towards Optimal Multigrid Efficiency for the Navier-Stokes Equations

A fast multigrid solver for the steady incompressible Navier-Stokes equations is presented. Unlike time-marching schemes, this approach uses relaxation of the steady equations. Application of this method results in a discretization that correctly distinguishes between the advection and elliptic parts of the operator, allowing efficient smoothers to be constructed. Numerical solutions are shown for flow over a flat plate and a Karman-Trefftz airfoil. Using collective Gauss-Seidel line relaxation in both the vertical and horizontal directions, multigrid convergence behavior approaching that of O(N) methods is achieved. The computational efficiency of the numerical scheme is compared with that of a Runge-Kutta based multigrid method.

Swanson, R. C.↗

NASA NTRS1986

Numerical solutions of three-dimensional Navier-Stokes equations for closed-bluff bodies

Methods of grid adaption are reviewed and a method is developed with the capability of adaption to several flow variables. This method is based on a variational approach and is an algebraic method which does not require the solution of partial differential equations. The method has also been formulated in such a way that there is no need for any matrix inversion. The method is used in conjunction with the calculation of hypersonic flow over a blunt nose. The equations of motion are the compressible Navier-Stokes equations where all viscous terms are retained. They are solved by the MacCormack time-splitting method and a movie has been produced which shows simultaneously the transient behavior of the solution and the grid adaption. The results are compared with the experimental and other numerical results.

Abolhassani, Jamshid S.↗

NASA NTRS1976

A block iterative finite element algorithm for numerical solution of the steady-state, compressible Navier-Stokes equations

An iterative method for numerically solving the time independent Navier-Stokes equations for viscous compressible flows is presented. The method is based upon partial application of the Gauss-Seidel principle in block form to the systems of nonlinear algebraic equations which arise in construction of finite element (Galerkin) models approximating solutions of fluid dynamic problems. The C deg-cubic element on triangles is employed for function approximation. Computational results for a free shear flow at Re = 1,000 indicate significant achievement of economy in iterative convergence rate over finite element and finite difference models which employ the customary time dependent equations and asymptotic time marching procedure to steady solution. Numerical results are in excellent agreement with those obtained for the same test problem employing time marching finite element and finite difference solution techniques.

Cooke, C. H.↗

NASA NTRS1977

A block iterative finite element algorithm for numerical solution of the steady-state, compressible Navier-Stokes equations

An iterative method for numerically solving the time independent Navier-Stokes equations for viscous compressible flows is presented. The method is based upon partial application of the Gauss-Seidel principle in block form to the systems of the nonlinear algebraic equations which arise in construction of finite element (Galerkin) models approximating solutions of fluid dynamic problems. The continuous cubic element on triangles is employed for function approximation. Computational results for a free shear flow at Re = 1000 indicate significant achievement of economy in iterative convergence rate over finite element and finite difference models which employ the customary time dependent equations and symptotic time marching procedure to steady solution. Numerical results are in excellent agreement with those obtained for the same test problem employing time marching finite element and finite difference solution techniques.

Cooke, C. H.↗