Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Statistical fluctuations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Heterodyne Doppler 1-micron lidar measurement of reduced effective telescope aperture due to atmospheric turbulence

A pulsed Nd:YAG bistatic focused-beam lidar allowing simultaneous heterodyne and direct detection of the same lidar returns has been experimentally employed to ascertain the effect of atmospheric turbulence on heterodyne and direct-detection lidar at 1 micron, by measuring the average carrier-to-noise ratio and statistical fluctuation level in the return signals under various experimental and atmospheric conditions. Atmospheric turbulence is found capable of reducing the lidar receiver's effective telescope aperture and heterodyne detection efficiency. This observed effective-aperture limitation functionally resembles predictions based on the Clifford and Wandzura (1981) heterodyne wavefront detection theory.

Chan, Kin Pui↗
NASA NTRS1993

Second quantization in bit-string physics

Using a new fundamental theory based on bit-strings, a finite and discrete version of the solutions of the free one particle Dirac equation as segmented trajectories with steps of length h/mc along the forward and backward light cones executed at velocity +/- c are derived. Interpreting the statistical fluctuations which cause the bends in these segmented trajectories as emission and absorption of radiation, these solutions are analogous to a fermion propagator in a second quantized theory. This allows us to interpret the mass parameter in the step length as the physical mass of the free particle. The radiation in interaction with it has the usual harmonic oscillator structure of a second quantized theory. How these free particle masses can be generated gravitationally using the combinatorial hierarchy sequence (3,10,137,2(sup 127) + 136), and some of the predictive consequences are sketched.

Noyes, H. Pierre↗
NASA NTRS1993

Double troughs in broad absorption line quasars and Ly-alpha-N V line-locking

It was investigated whether the double trough (DT) structure in the mean C IV BAL trough reported by Weymann et al. (1991) is real or due to statistical fluctuations of BAL troughs over random outflow velocities in a limited sample. A sample of 72 BAL QSOs with C IV BAL troughs was analyzed. It is found that only 22 percent of the sample explicitly exhibits the DT feature; when present the DTs are deep. A Monte Carlo simulation of the mean C IV BAL suggests that the DT feature is real at only the 95-98 percent level.

Korista, Kirk T.↗
NASA NTRS1995

LET spectra measurements from the STS-35 CPDs

Linear energy transfer (LET) spectra derived form automated track analysis system (ATAS) track parameter measurements for crew passive dosimeters (CPD's) flown with the astronauts on STS-35 are plotted. The spread between the seven individual spectra is typical of past manual measurements of sets of CPD's. This difference is probably due to the cumulative net shielding variations experienced by the CPD's as the astronauts carrying them went about their activities on the Space Shuttle. The STS-35 mission was launched on Dec. 2, 1990, at 28.5 degrees inclination and 352-km altitude. This is somewhat higher than the nominal 300-km flights and the orbit intersects more of the high intensity trapped proton region in the South Atlantic Anomaly (SAA). However, in comparison with APD spectra measured on earlier lower altitude missions (STS-26, -29, -30, -32), the flux spectra are all roughly comparable. This may be due to the fact that the STS-35 mission took place close to solar maximum (Feb. 1990), or perhaps to shielding differences. The corresponding dose and dose equivalent spectra for this mission are shown. The effect of statistical fluctuations at the higher LET values, where track densities are small, is very noticeable. This results in an increased spread within the dose rate and dose equivalent rate spectra, as compared to the flux spectra. The contribution to dose and dose equivalent per measured track is much greater in the high LET region and the differences, though numerically small, are heavily weighted in the integral spectra. The optimum measurement and characterization of the high LET tails of the spectra represent an important part of the research into plastic nuclear track detector (PNTD) response. The integral flux, dose rate, dose equivalent rate and mission dose equivalent for the seven astronauts are also given.

Source record↗
NASA NTRS1994

Detection of atmospheric pressure loading using very long baseline interferometry measurements

Loading of the Earth by the temporal redistribution of global atmospheric mass is likely to displace the positions of geodetic monuments by tens of millimeters both vertically and horizontally. Estimates of these displacements are determined by convolving National Meteorological Center (NMC) global values of atmospheric surface pressure with Farrell's elastic Green's functions. An analysis of the distances between radio telescopes determined by very long baseline interferometry (VLBI) between 1984 and 1992 reveals that in many of the cases studied there is a significant contribution to baseline length change due to atmospheric pressure loading. Our analysis covers intersite distances of between 1000 and 10,000 km and is restricted to those baselines measured more than 100 times. Accounting for the load effects (after first removing a best fit slope) reduces the weighted root-mean-square (WRMS) scatter of the baseline length residuals on 11 of the 22 baselines investigated. The slight degradation observed in the WRMS scatter on the remaining baselines is largely consistent with the expected statistical fluctuations when a small correction is applied to a data set having a much larger random noise. The results from all baselines are consistent with approximately 60% of the computed pressure contribution being present in the VLBI length determinations. Site dependent coefficients determined by fitting local pressure to the theoretical radial displacement are found to reproduce the deformation caused by the regional pressure to within 25% for most inland sites. The coefficients are less reliable at near coastal and island stations.

Vandam, T. M.↗
NASA NTRS1993

Further ROSAT measurements of the period of 4U 1820-30

We have made two new observations of 4U 1820-30 with the ROSAT position sensitive proportional counter (PSPC). The measurements do not provide further evidence for a secular period decrease of this source. Instead, after inclusion of our new arrival time measurements the significance of the orbital period derivative drops (from 5.5 to 4.6 sigma), its best-fit value decreases (to P-dot/P =(-5.3 +/- 1.1) x 10(exp -8)/yr) and the formal probability that statistical fluctuations have caused the observed P-dot increases to 0.5% (from 0.003%). We detect light curve changes that are large enough to be the cause of some (or all) of the period changes seen in 4U 1820-30, but not large enough to explain the discrepancy of the observed period derivative with that theoretically predicted. We explore the possibility that the secular period change observed during 1976-1991 could have been dominated by random or systematic changes in the position and shape of an occulting bulge on the disk rim and conclude that phase shifts caused by this mechanism could in principle explain the discrepancy entirely.

Klis, M. Van Der↗
NASA NTRS1994

Atmospheric pressure loading effects on Global Positioning System coordinate determinations

Earth deformation signals caused by atmospheric pressure loading are detected in vertical position estimates at Global Positioning System (GPS) stations. Surface displacements due to changes in atmospheric pressure account for up to 24% of the total variance in the GPS height estimates. The detected loading signals are larger at higher latitudes where pressure variations are greatest; the largest effect is observed at Fairbanks, Alaska (latitude 65 deg), with a signal root mean square (RMS) of 5 mm. Out of 19 continuously operating GPS sites (with a mean of 281 daily solutions per site), 18 show a positive correlation between the GPS vertical estimates and the modeled loading displacements. Accounting for loading reduces the variance of the vertical station positions on 12 of the 19 sites investigated. Removing the modeled pressure loading from GPS determinations of baseline length for baselines longer than 6000 km reduces the variance on 73 of the 117 baselines investigated. The slight increase in variance for some of the sites and baselines is consistent with expected statistical fluctuations. The results from most stations are consistent with approximately 65% of the modeled pressure load being found in the GPS vertical position measurements. Removing an annual signal from both the measured heights and the modeled load time series leaves this value unchanged. The source of the remaining discrepancy between the modeled and observed loading signal may be the result of (1) anisotropic effects in the Earth's loading response, (2) errors in GPS estimates of tropospheric delay, (3) errors in the surface pressure data, or (4) annual signals in the time series of loading and station heights. In addition, we find that using site dependent coefficients, determined by fitting local pressure to the modeled radial displacements, reduces the variance of the measured station heights as well as or better than using the global convolution sum.

Vandam, Tonie M.↗
NASA NTRS1996

Report on 3 and 4-point correlation statistics in the COBE DMR anisotrophy maps

As part of the work performed under NASA contract # NAS5-32648, we have computed the 3-point and 4-point correlation functions of the COBE-DNIR 2-year and 4-year anisotropy maps. The motivation for this study was to search for evidence of non-Gaussian statistical fluctuations in the temperature maps: skewness or asymmetry in the case of the 3-point function, kurtosis in the case of the 4-point function. Such behavior would have very significant implications for our understanding of the processes of galaxy formation, because our current models of galaxy formation predict that non-Gaussian features should not be present in the DMR maps. The results of our work showed that the 3-point correlation function is consistent with zero and that the 4-point function is not a very sensitive probe of non-Gaussian behavior in the COBE-DMR data. Our computation and analysis of 3-point correlations in the 2-year DMR maps was published in the Astrophysical Journal Letters, volume 446, page L67, 1995. Our computation and analysis of 3-point correlations in the 4-year DMR maps will be published, together with some additional tests, in the June 10, 1996 issue of the Astrophysical Journal Letters. Copies of both of these papers are attached as an appendix to this report.

Hinshaw, Gary↗
NASA NTRS1999

A Summary of Biases in the BATSE Burst Trigger

The BATSE threshold for triggering on a gamma-ray burst is generally expressed in units of peak flux between 50 and 300 keV averaged over 1024 milliseconds. The completeness of the sample is affected by several systematic and statistical affects. A study is currently underway to characterize two of these that have not yet been Included Abstract: in the BATSE trigger efficiency calculation. They are: 1) the effects of statistical fluctuations on the measurement of peak flux and, 2) the effect on the trigger threshold of "slow risers", In which some of the burst flux is Identified as background. Some other biases that have been identified are in fact Malmquist-type biases which relate to a volume limited, rather than peak flux limited, burst source distribution and which cannot be determined without knowledge of the burst luminosity distribution.

Meegan, Charles A↗
NASA NTRS2000

X-Ray Companion Sources to Seyfert 2 Galaxies

The ROSAT observations supported by this grant provided improved positions for the "companion sources" to 3 Seyfert 2 galaxies, as proposed. Follow-up observations at the MMT and CTIO found that the optical counterparts to these sources were a mixture of normal stars (mainly M dwarfs) and background AGN. This surprising result suggests that the reported excess of PSPC sources around Seyfert 2 galaxies was a statistical fluctuation, and does not indicate a new population of bright non-nuclear X-ray sources in these objects. The report of Xia et al., that a companion to MRK273 was a dwarf galaxy at the same redshift containing another Seyfert 2 galaxy was withdrawn in an erratum. (The true redshift of the companion was much larger than that of MRK273.) For the time being then this question is closed. A re-examination of the "companions" using Chandra data will become possible in the next year. If the optical 'counterparts' we found are not the true counterparts, or if the counterparts we found were the background of inevitable interlopers ('serendipitous') sources, there may remain a high X-ray luminosity population associated with Seyfert 2 galaxies.

Elvis, Martin↗
NASA NTRS1997

Planar Doppler Velocimetry for Large-Scale Wind Tunnel Testing

Recently, Planar Doppler Velocimetry (PDV) has been shown by several laboratories to offer an attractive means for measuring three-dimensional velocity vectors everywhere in a light sheet placed in a flow. Unlike other optical means of measuring flow velocities, PDV is particularly attractive for use in large wind tunnels where distances to the sample region may be several meters, because it does not require the spatial resolution and tracking of individual scattering particles or the alignment of crossed beams at large distances. To date, demonstrations of PDV have been made either in low speed flows without quantitative comparison to other measurements, or in supersonic flows where the Doppler shift is large and its measurement is relatively insensitive to instrumental errors. Moreover, most reported applications have relied on the use of continuous-wave lasers, which limit the measurement to time-averaged velocity fields. This work summarizes the results of two previous studies of PDV in which the use of pulsed lasers to obtain instantaneous velocity vector fields is evaluated. The objective has been to quantitatively define and demonstrate PDV capabilities for applications in large-scale wind tunnels that are intended primarily for the production testing of subsonic aircraft. For such applications, the adequate resolution of low-speed flow fields requires accurate measurements of small Doppler shifts that are obtained at distances of several meters from the sample region. The use of pulsed lasers provides the unique capability to obtain not only time-averaged fields, but also their statistical fluctuation amplitudes and the spatial excursions of unsteady flow regions such as wakes and separations. To accomplish the objectives indicated, the PDV measurement process is first modeled and its performance evaluated computationally. The noise sources considered include those related to the optical and electronic properties of Charge-Coupled Device (CCD) arrays and to speckle effects associated with coherent illumination from pulsed lasers. The signal noise estimates are incorporated into the PDV signal analysis process and combined with computed scattering signals using a Mie scattering theory for polydisperse smoke particles. The relevant parameters incorporate a range of practical aerodynamic test conditions and facility sizes. The results define the optimum instrument configurations, show that the expected signal levels from a practical PDV system are sufficiently large to allow its useful application in large facilities, and show that the expected velocity measurement uncertainties are small compared to the mean velocities of interest for most subsonic, large-scale wind tunnel testing. Experimental studies using several experimental bench-top setups are then described that validate the physics of the PDV model and to calibrate its computed results. The validated model allows estimates of the uncertainties of PDV measurements and a complete definition of the PDV capabilities to be made with sufficient confidence to decide the viability of PDV for large-scale wind tunnel applications.

McKenzie, Robert L.↗
NASA NTRS1997

Measurement Capabilities of Planar Doppler Velocimetry in Large-Scale Wind Tunnels

Over the past few years, Planar Doppler Velocimetry (PDT) has been shown by several laboratories to offer an attractive means for measuring three-dimensional velocity vectors everywhere in a light sheet placed in a flow. Unlike some other optical means of measuring flow velocities, PDT is particularly attractive for use in large wind tunnels where distances to the sample region may be several meters, because it does not require the spatial resolution and tracking of individual scattering particles or the alignment of crossed beams at large distances. To date, demonstrations of PDT (also called Doppler Global Velocimetry by some authors) have been made either in low speed flows without quantitative comparison to other measurements, or in supersonic flows where the Doppler shift is large and its measurement is relatively insensitive to instrumental errors. Moreover, most reported applications have relied on the use of continuous-wave lasers, which limit the measurement to time-averaged velocity fields. This work summarizes the results of two previous studies of PDT in which the use of pulsed lasers to obtain instantaneous velocity vector fields is evaluated. The objective has been to quantitatively define and demonstrate PDT capabilities for applications in large-scale wind tunnels that are intended primarily for the testing of rotorcraft and subsonic aircraft at speeds typically less than 100 m/s. For such applications, the adequate resolution of low-speed flow fields requires accurate measurements of small Doppler shifts that are obtained at distances of several meters from the sample region and with a field of view that is sufficient to encompass the entire region of interest. The use of pulsed lasers provides the unique capability to obtain not only time-averaged fields, but also their statistical fluctuation amplitudes and the spatial excursions of unsteady flow regions such as wakes, separations, and rotor-tip vortices. To accomplish the objectives of these studies, the PDT measurement process was first modeled and its performance evaluated computationally. The noise sources considered included those related to the optical and electronic properties of Charge-Coupled Device (CCD) arrays and to speckle effects associated with the coherent illumination of aerosols from pulsed lasers. The signal noise estimates were incorporated into the PDT signal analysis process and combined with computed scattering signals using a Mae scattering theory for a distributed range of aerosol particle sizes. The results are used to define the necessary instrument configuration, to show that the expected signal levels from a practical PDT system are sufficiently large to allow its useful application in large facilities, and to show that the expected velocity measurement uncertainties are small compared to the mean velocities of interest for most subsonic, large-scale wind tunnel testing, Experimental studies using several bench-top setups are then described that validate the physics of the PDT model and demonstrate the ability to obtain accurate PDT measurements using procedures that are compatible with large-scale wind tunnel operations. The PDT measurement capabilities found in this study lead to the conclusion that PDT offers significant advantages compared to other means of measuring velocity fields in large-scale wind tunnels, including those operating at low speeds.

McKenzie, Robert L.↗
NASA NTRS1998

Substrate Effects on Electronic Properties of Atomic Chains

When the device size is reduced down to 0.07 micrometers, the number of dopant atoms in the channel will no longer be macroscopic, typically less than a hundred. A spatial distribution of these dopant atoms will fluctuate statistically from device to device even in identically designed devices, and this places a serious limitation for integration. It is, however, impractical to control dopant positions within atomic dimension. One fundamental solution to this problem is to create electronics with atomically precise, but preferably simple structures. Atomic chains, precise structures of adatoms created on an atomically regulated surface, are candidates for constituent components in future electronics. All the adatoms will be placed at designated positions on the substrate, and all the device structures will be precise, free from any deviations. It was predicted using the tight-binding calculation with universal parameters that silicon chains were metallic and magnesium chains were semiconducting regardless of the lattice spacing, and a possible doping method was also proposed. In these treatments, the substrate was assumed to serve as a non-interacting template holding the adatoms without a formation of chemical bonding with substrate atoms. However, this scheme may not be easy to implement experimentally. Adatoms will have to be fixed with a van der Waals force on the substrate, but the force is generally weak and an extremely low temperature environment has to be prepared to suppress their unwanted thermal displacement. It may be logical to seek a scheme to allow the adatoms to form chemical bonding with the substrate atoms and secure their positions. The substrate effects are studied in detail.

Yamada, Toshishige↗
NASA NTRS2004

High Resolution Spectroscopy of X-ray Quasars: Searching for the X-ray Absorption from the Warm-Hot Intergalactic Medium

We present a survey of six low to moderate redshift quasars with Chandra and XMM-Newton. The primary goal is to search for the narrow X-ray absorption lines produced by highly ionized metals in the Warm-Hot Intergalactic Medium. All the X-ray spectra can be well fitted by a power law with neutral hydrogen absorption. Only one feature is detected at above 3-sigma level in all the spectra, which is consistent with statistic fluctuation. We discuss the implications in our understanding of the baryon content of the universe. We also discuss the implication of the non-detection of the local (z approx. 0) X-ray absorption.

Fang, Taotao↗
NASA NTRS2009

Kepler Data Validation and Follow-up Programs

The approach that the Kepler Mission uses to remove false positive events and to validate the discoveries consists of two parts; data validation (DPI) and follow up observations program (FOP). DV consists of several methods of examining the data from the spacecraft observations. First, to rule out statistical fluctuations in the data, accept only signals that show 3 or more transits and that have a total signal-to-noise ratio that exceeds 7 sigma. Second. to identify small stellar companions to the target star, we check for secondary eclipses and determine if the transit characteristics are appropriate for a planetary companion. Third, check for background binaries that are in the target aperture. Here we measure the movement of the image centroid before, during, and after the transit. If the target is producing the signal, a dimming wi11 move the image centroid in a known direction and magnitude. If the signal comes from a nearby star, the amplitude and direction of the motion wi11 be different, This test is expected to rule out the hundreds of binary signals expected from background stars. The precision of the measurement depends on the stellar fluxes and positions but can be better than 0.01 pixel; i.e., 0.04". Those candidates that pass these tests are examined using ground-based telescopes and radial velocity spectrometers. First medium precision RV is used to rule out any remaining stellar companions. Then high spatial resolution imaging is used to check for nearby stars that are in the aperture- (The Kepler apertures depend on magnitude but are of order 36 sq are sec in area.) If no stars are present that quid generate the observed signal, then the candidate goes to a large telescope such as Keck, HET, or Wi1lilam Herschel for high precision observations to get the planet mass or an upper limit to it, if there are some stars in the aperture, then the photometric observations are employed to look for the transit by cane of the confounding stars. If none are seen, then the candidate is sent to a large telescope such as Keck

William, Borucki J.↗
NASA NTRS2011

Searches for Periodic Neutrino Emission from Binary Systems with 22 and 40 Strings of IceCube

Recent observations of GeV /TeV photon emission from several X-ray binaries have sparked a renewed interest in these objects as galactic particle accelerators. In spite of the available multi-wavelength data, their acceleration mechanisms are not determined, and the nature of the accelerated particles (hadrons or leptons) is unknown. While much evidence favors leptonic emission, it is very likely that a hadronic component is also accelerated in the jets of these binary systems. The observation of neutrino emission would be clear evidence for the presence of a hadronic component in the outflow of these sources. In this paper we look for periodic neutrino emission from binary systems. Such modulation, observed in the photon flux, would be caused by the geometry of these systems. The results of two searches are presented that differ in the treatment of the spectral shape and phase of the emission. The 'generic' search allows parameters to vary freely and best fit values, in a 'model-dependent' search, predictions are used to constrain these parameters. We use the IceCube data taken from May 31, 2007 to April 5, 2008 with its 22-string configuration, and from April 5, 2008 and May 20, 2009 with its 40-string configuration. For the generic search and the 40 string sample, we find that the most significant source in the catalog of 7 binary stars is Cygnus X-3 with a 1.8% probability after trials (2.10" sigma one-sided) of being produced by statistical fluctuations of the background. The model-dependent method tested a range of system geometries - the inclination and the massive star's disk size - for LS I+61 deg 303, no significant excess was found.

Abassi, R.↗
NASA NTRS2010

An Algorithm for the Fitting of Planet Models to Kepler Light Curves

We describe an algorithm which fits model planetary system parameters to light curves from Kepler Mission target stars. The algorithm begins by producing an initial model of the system which is used to seed the fit,with particular emphasis on obtaining good transit timing parameters. An attempt is then made to determine whether the observed transits are more likely due to a planet or an eclipsing binary. In the event that the transits are consistent with a transiting planet, an iterative fitting process is initiated: a wavelet-based whitening filter is used to eliminate stellar variations on timescales long compared to a transit; a robust nonlinear fitter operating on the whitened light curve produces a new model of the system; and the procedure iterates until convergence upon a self-consistent whitening filter and planet model. The fitted transits are removed from the light curve anda search for additional planet candidates is performed upon the residual light curve. The fitted models are used in additional tests which identify false positive planet detections: multiple planet candidates with near-identical fitted periods are far more likely to be an eclipsing binary, for example, while target stars in which the model lightcurve is correlated with the star centroid position may indicate a background eclipsing binary, and subtraction of all model planet candidates yields a light curve of pure noise and stellar variability, which can be used to study the probability that the planet candidates result from statistical fluctuations in the data.

Exoplanet↗
DOE OSTI2023

Optimisation of the Search for CP-symmetry Violation at the Deep Underground Neutrino Experiment

The Deep Underground Neutrino Experiment (DUNE) is a next-generation long baseline experiment, which will be situated in South Dakota. Its detectors will utilise liquid-argon time projection chamber technology, which is able to capture neutrino interactions with an incredible spatial and calorimetric resolution. With what will become the world’s most intense neutrino beam, a highly capable near detector, and four (10kt fducial mass) far detector modules, DUNE will be able to achieve an ambitious physics programme. Most notably, DUNE will determine whether charge-parity symmetry is broken in neutrino oscillations - a finding that would have significant implications for the understanding of the matter-antimatter asymmetry in our Universe.This thesis presents the optimisation of a CP-violation analysis at DUNE using thePandora pattern-recognition software. The analysis assumes a 3.5 year exposure (1.36 × 1023 protons on target) to a neutrino and an antineutrino beam (7 year total). Only the predicted data of the far detector modules is used; near detector samples are not included. The initial sensitivity to CP-violation is found to be 3.8σ+0.9σ−1.1σ in an estimate that includes oscillation parameter uncertainties, systematic uncertainties and statistical fluctuations, and assumes a normal-ordering of the neutrino mass hierarchy. The performance of the Pandora event reconstruction is linked to that of the analysis, which is found to be limited by the reconstruction of the initial track-like region of electrons and photons. The ShowerRefinement algorithm is developed in response to this and its implementation into the analysis workflow results in an improved sensitivity to CP-violation of 4.6σ+0.9σ−1.0σ. With a perfected neutrino interaction vertex placement, this is further increased to 5.1σ+1.0σ−1.1σ.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗