Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Space lasers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

One-megawatt solar pumped and electrically driven lasers for space power transmission

High power lasers in space could provide power for a variety of future space missions such as spacecraft electric power requirements and laser propulsion. This study investigates four electrically pumped laser systems, krypton fluoride, copper vapor, laser diode array, and the carbon dioxide laser, all scaled to 1-MW laser output. Each system obtained its primary power from a large solar photovoltaic array which, in turn, provides power for the appropriate laser power conditioning subsystem. Each system was block-diagrammed, and the power and efficiency were found for each subsystem. The laser diode array had the highest solar-to-laser efficiency (6 percent) and smallest radiator area making it the most advantageous of the electrically driven lasers studied. This system was then compared with an iodine solar pumped laser system previously studied. The diode array had a better wavelength with regard to transmission optics mass, but it also had a heavier radiator because of its lower temperature radiator requirement. A more advanced solar pumped laser could emerge as the preferred laser system for space applications.

Deyoung, R. J.↗
NASA NTRS2003

Control of the Laser Interferometer Space Antenna

The detection of gravity waves will open a new window of observation on the universe. Unlike typical observatories, which detect electromagnetic waves traveling through space-time, the Laser Interferometer Space Antenna (LISA) will detect ripples in space-time itself. Science targets include galactic binaries, merging supermassive black holes, intermediate-mass/seed black holes, and cosmological backgrounds. Gravity waves are detected by measuring the strain in space, i.e. the change in distance between a set of masses (test masses or proof masses) separated by a great distance. Ground based detection of gravity waves by Laser Interferometer Gravitational Wave Observatory (LIGO) and other observatories are possible with laser interferometry; hut the relatively short arm length (4 km) and seismic noise limit the measurement band to above 10 Hz on Earth. LISA also uses laser interferometric measurement of the change in distance between test masses, but does it in space. Each LISA spacecraft embodies two test masses. Space allows very long arm lengths (5 million km for LISA) and a very quiet acceleration environment (3.5x10(exp -15) meters per second squared/Hertz (sup 0.5) for LISA), which allows for the detection of gravity wave strains to a best sensitivity of 3x10(exp -24) strain/Hertz (sup 0.5) over the measurement band of 10(exp -4) to 10(exp -1) Hertz for a one-year observation. The LISA mission consists of three spacecraft in heliocentric orbit. The orbits are chosen so that the three spacecraft form a roughly equilateral triangle with its center located at a radius of 1 AU and 20 degrees behind the Earth, as shown. Requirements are placed on the rotational and translational dynamics of each spacecraft to ensure that the proper sensitivity for science measurements can be achieved.

Maghami, Peiman↗
NASA NTRS2000

Development Towards a Space Qualified Laser Stabilization System in Support of Space-Based Optical Interferometers

We report on the development, functional performance and space-qualification status of a laser stabilization system supporting a space-based metrology source used to measure changes in optical path lengths in space-based stellar interferometers. The Space Interferometry Mission (SIM) and Deep Space 3 (DS-3) are two missions currently funded by the National Aeronautics and Space Administration (NASA) that are space-based optical interferometers. In order to properly recombine the starlight received at each telescope of the interferometer it is necessary to perform high resolution laser metrology to stabilize the interferometer. A potentially significant error source in performing high resolution metrology length measurements is the potential for fluctuations in the laser gauge itself. If the laser frequency or wavelength is changing over time it will be misinterpreted as a length change in one of the legs of the interferometer. An analysis of the frequency stability requirement for SIM resulted in a fractional frequency stability requirement of square root (S(sub y)(f)) = <2 x 10(exp -12)/square root(Hz) at Fourier frequencies between 10 Hz and 1000 Hz. The DS-3 mission stability requirement is further increased to square root (S(sub y)(f)) = <5 x 10(exp -14)/Square root(Hz) at Fourier frequencies between 0.2 Hz and 10 kHz with a goal of extending the low frequency range to 0.05 Hz. The free running performance of the Lightwave Electronics NPRO lasers, which are the baseline laser for both SIM and DS-3 vary in stability and we have measured them to perform as follows (9 x l0(exp -11)/ f(Hz))(Hz)/square root(Hz)) = <( square root (S(sub y)(f)) = <(1.3 x l0(exp -8)/ f(Hz))/Square root(Hz). In order to improve the frequency stability of the laser we stabilize the laser to a high finesse optical cavity by locking the optical frequency of the laser to one of the transmission modes of the cavity. At JPL we have built a prototype space-qualifiable system meeting the stability requirements of SIM, which has been delivered to one of the SIM testbeds. We have also started on the development of a system to meet the stability needs of DS-3.

Seidel, David J.↗
NASA NTRS2003

Precision Pointing for the Laser Interferometer Space Antenna (LISA) Mission

The Laser Interferometer Space Antenna (LISA) mission is a planned NASA-ESA gravity wave detector consisting of three spacecraft in heliocentric orbit. Lasers are used to measure distance fluctuations between the proof masses aboard the spacecraft to the picometer level over the 5 million kilometer spacing. Each spacecraft and it's two laser transmit/receive telescopes must be held stable in pointing to less than 8 nanoradians per root Hertz in the frequency band 0.1 mHz to 0.1 Hz. This is accomplished by sensing the pointing error in the received beam and controlling the spacecraft attitude with a set of micronewton thrusters. Requirements, sensors, actuators, control design, and simulations are described in this paper.

Bauer, Frank H.↗
NASA NTRS2004

Solar Pumped High Power Solid State Laser for Space Applications

Highly coherent laser light provides a nearly optimal means of transmitting power in space. The simplest most direct means of converting sunlight to coherent laser light is a solar pumped laser oscillator. A key need for broadly useful space solar power is a robust solid state laser oscillator capable of operating efficiently in near Earth space at output powers in the multi hundred kilowatt range. The principal challenges in realizing such solar pumped laser oscillators are: (1) the need to remove heat from the solid state laser material without introducing unacceptable thermal shock, thermal lensing, or thermal stress induced birefringence to a degree that improves on current removal rates by several orders of magnitude and (2) to introduce sunlight at an effective concentration (kW/sq cm of laser cross sectional area) that is several orders of magnitude higher than currently available while tolerating a pointing error of the spacecraft of several degrees. We discuss strategies for addressing these challenges. The need to remove the high densities of heat, e.g., 30 kW/cu cm, while keeping the thermal shock, thermal lensing and thermal stress induced birefringence loss sufficiently low is addressed in terms of a novel use of diamond integrated with the laser material, such as Ti:sapphire in a manner such that the waste heat is removed from the laser medium in an axial direction and in the diamond in a radial direction. We discuss means for concentrating sunlight to an effective areal density of the order of 30 kW/sq cm. The method integrates conventional imaging optics, non-imaging optics and nonlinear optics. In effect we use a method that combines some of the methods of optical pumping solid state materials and optical fiber, but also address laser media having areas sufficiently large, e.g., 1 cm diameter to handle the multi-hundred kilowatt level powers needed for space solar power.

Fork, Richard L.↗
NASA NTRS2017

A Multi-Wavelength IR Laser for Space Applications

We present a laser technology development with space flight heritage to generate laser wavelengths in the near- to mid-infrared (NIR to MIR) for space lidar applications. Integrating an optical parametric crystal to the LOLA (Lunar Orbiter Laser Altimeter) laser transmitter design affords selective laser wavelengths from NIR to MIR that are not easily obtainable from traditional diode pumped solid-state lasers. By replacing the output coupler of the LOLA laser with a properly designed parametric crystal, we successfully demonstrated a monolithic intra-cavity optical parametric oscillator (iOPO) laser based on all high technology readiness level (TRL) subsystems and components. Several desired wavelengths have been generated including 2.1 microns, 2.7 microns and 3.4 microns. This laser can also be used in trace-gas remote sensing, as many molecules possess their unique vibrational transitions in NIR to MIR wavelength region, as well as in time-of-flight mass spectrometer where desorption of samples using MIR laser wavelengths have been successfully demonstrated.

Laser↗
NASA NTRS1989

Hybrid current driver designed for a space-borne laser transmitter

NASA Goddard is developing a free-space laser communication transmitter. Each of the 10 GaAlAs diode lasers in the transmitter must be digitally modulated by individual current drivers from a common data source. In order to fit the miniature laser header modules, a hybrid integrated laser current driver was required. The hybrid, smaller than a postage stamp, can drive 100 mA modulation current at a data rate of 200 Mbit/s NRZ.

Zimmerman, Robert K., Jr.↗
NASA NTRS1989

Frequency stable high power lasers in space

The concept of a laser heterodyne gravity wave antenna that would operate in solar orbit with a one million kilometer path length is discussed. Laser technology that would be appropriate for operation of this space-based gravity wave detector is also discussed. The rapid progress in diode laser coupled with the energy storage and potentially sub-Hertz linewidths of solid state lasers, and the possibility of efficient frequency conversion by nonlinear optical techniques defines a technology that is appropriate for laser interferometry in space. The present status of diode-laser-pumped, solid state lasers is summarized and future progress is projected in areas of linewidth control, high average power, operating efficiency, and operational lifetimes that are essential for space-based applications.

Byer, Robert L.↗
NASA NTRS1988

Comparison of electrically driven lasers for space power transmission

High-power lasers in space could provide power for a variety of future missions such as spacecraft electric power requirements and laser propulsion. This study investigates four electrically pumped laser systems, all scaled to 1-MW laser output, that could provide power to spacecraft. The four laser systems are krypton fluoride, copper vapor, laser diode array, and carbon dioxide. Each system was powered by a large solar photovoltaic array which, in turn, provided power for the appropriate laser power conditioning subsystem. Each system was block-diagrammed, and the power and efficiency were found for each subsystem block component. The copper vapor system had the lowest system efficiency (6 percent). The CO2 laser was found to be the most readily scalable but has the disadvantage of long laser wavelength.

Deyoung, R. J.↗
NASA NTRS1986

Solar pumped laser technology options for space power transmission

An overview of long-range options for in-space laser power transmission is presented. The focus is on the new technology and research status of solar-pumped lasers and their solar concentration needs. The laser options include gas photodissociation lasers, optically-pumped solid-state lasers, and blackbody-pumped transfer lasers. The paper concludes with a summary of current research thrusts.

Conway, E. J.↗
NASA NTRS1991

Space Station Laser Communication Transceiver

NASA/Goddard Space Flight Center (GSFC) has initiated the development of experimental optical communication system which will be installed on Space Station Freedom. This system is part of the Space Station Attached a Payloads Program and is currently scheduled for a 1997 launch. The system is being designed to carry out comprehensive set of tests to evaluate and demonstrate the capabilities of this relatively new technology. Communication tests at rates up to 1200 mbps will be conducted over the space-to-ground link using an existing tracking facility at the GSFC. GaAlAs semiconductor lasers will be intensity modulated using 4 slot pulse position modulation format. Direct detection receivers using silicon avalanche photodiodes will be utilized, and 1 microradian accuracy pointing will be achieved with 2 cascaded pointing stages. Successful completion of this in-orbit test program should demonstrate both the technical maturity and readiness of this technology for follow-up operational missions.

Mitzmaurice, Michael↗
NASA NTRS2007

NASA Goddard's Application of Lasers in Space

Researchers at NASA Goddard have been applying lasers for space measurements for over 4 decades, starting with satellite laser ranging in the mid 1960s. This talk will briefly review the history of Goddard's application to lasers to the scientific exploration of space, provide an overview of its ongoing laser-related programs, and give some possibilities for the future.

Abshire, James B.↗
NASA NTRSDate not supplied

Progress of the US Laser Development for the Laser Interferometer Space Antenna (LISA) Program

NASA Goddard Space Flight Center (GSFC) has been actively developing the laser transmitter for the Laser Interferometer Space Antenna (LISA) program since the late 2017. We have delivered a prototype laser transmitter to the LISA program for performance evaluationin 2021. We continued to further develop the LISA laser with a goal of advancing the technology readiness level (TRL) of the laser to 6 by the end of 2023. In this paper, we report on the progress we made on the laser development for the LISA program.

Space instrument↗
NASA NTRS1988

Performance of efficient Q-switched diode-laser-pumped Nd:YAG and Ho:YLF lasers for space applications

Solid-state lasers pumped by continuous-wave diode lasers can be Q-switched to obtain high peak power output pulses. The dependence of laser-pulse energy, average output power, peak power, and pulse width on pulse-repetition frequency in Q-switched Nd:YAG and Ho:YLF lasers is determined and compared. At low pulse repetition rates, the much longer upper-stage lifetime in Ho:YLF gives a distinct advantage. At higher pulse rates, the overall laser efficiency and the stimulated emission cross section are more important parameters, leading to an advantage for Nd:YAG. The results are of significance for designing lasers for use in space optical communications and remote sensing systems.

Marshall, W. K.↗
NASA NTRS2024

Envisioning an Optimal Network of Space-Based Lasers for Orbital Debris Remediation

The rapid increase in resident space objects, including satellites and orbital debris, poses a significant threat to the safety and sustainability of space missions. This paper explores orbital debris remediation using a network of collaborative space-based lasers, leveraging laser ablation for momentum transfer on debris. A novel delta-v vector analysis framework quantifies the e↵ects of multiple simultaneous laser-to-debris (L2D) engagements by using vector composition of the imparted delta-v vectors. The paper introduces the Concurrent LocationScheduling Problem (CLSP), which optimizes the placement of laser platforms and the scheduling of L2D engagements to maximize debris remediation capacity. Due to the computational complexity of the CLSP, it is decomposed into two sequential subproblems: (1) optimal laser platform locations are determined using the Maximal Covering Location Problem, and (2) a novel integer linear programming-based approach schedules L2D engagements within the network configuration to maximize remediation capacity. Computational experiments are conducted to evaluate the proposed framework’s e↵ectiveness under various mission scenarios, demonstrating key network functions such as collaborative nudging, deorbiting, and just-in-time collision avoidance. A sensitivity analysis further examines how varying the number and distribution of laser platforms a↵ects debris remediation capacity, providing insights into optimizing the performance of space-based laser networks.

David O Williams Rogers↗
NASA NTRS1979

Design investigation of solar powered lasers for space applications

The feasibility of solar powered lasers for continuous operation in space power transmission was investigated. Laser power transmission in space over distances of 10 to 100 thousand kilometers appears possible. A variety of lasers was considered, including solar-powered GDLs and EDLs, and solar-pumped lasers. An indirect solar-pumped laser was investigated which uses a solar-heated black body cavity to pump the lasant. Efficiencies in the range of 10 to 20 percent are projected for these indirect optically pumped lasers.

Taussig, R.↗