Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solid-state spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Investigation of Americium-Containing Phosphates, Silicates, Borates, Molybdates, and Fluorides Synthesized via High-Temperature Flux Crystal Growth

The crystal chemistry of americium-containing extended structures was investigated, and several classes of americium-containing solid-state oxide materials were obtained in single-crystal form via high-temperature flux crystal growth. This enabled the structural characterization of rare examples of ternary, quaternary, and penternary americium-containing silicates K 3 Am (Si 2 O 7 ) and Cs 6 Am 2 Si 21 O 48 , phosphates Na 3 Am (PO 4 ) 2 and K 3 Am (PO 4 ) 2 , borates Ba 3 Am 2 (BO 3 ) 4 and AmBO 3 , borate halides Ca 5 Am(BO 3 ) 4 Cl, molybdates Li 0.5 Am 0.5 MoO 4 , and fluorides CsAm 2 F 7 . Using these crystallographic data, the ionic radii of Am 3+ with coordination numbers of six (0.975 Å), seven (1.052 Å), and nine (1.162 Å) were established. A maximum entropy method (MEM) analysis was performed on the single-crystal X-ray diffraction data that were collected for K 3 Nd(PO 4 ) 2 /K 3 Am(PO 4 ) 2 , K 3 NdSi 2 O 7 /K 3 AmSi 2 O 7 , and NdBO 3 /AmBO 3 , to qualitatively compare the ionicities of the Nd–O and Am–O bonds. In conclusion, Raman spectroscopy data were collected on single crystals of K 3 Am(PO 4 ) 2 and compared to the calculated Raman spectrum of K 3 Am(PO 4 ) 2 obtained from DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nernst power factor and figure of merit in the compensated semimetal ScSb

Recently, topological semimetals have emerged as strong candidates for solid-state thermomagnetic refrigerators due to their enhanced Nernst effect. This enhancement arises from the combined contributions of the Berry-curvature-induced anomalous Nernst coefficient associated with topological bands and the normal Nernst effect resulting from synergistic electron-hole compensation. Generally, these two effects are intertwined in topological semimetals, making it challenging to evaluate them independently. Here, we report the observation of a high Nernst effect in the electron-hole compensated semimetal ScSb with topologically trivial electronic band structures. Remarkably, we find a high maximum Nernst power factor of 𝑃⁢𝐹 𝑁 ∼ 35 × 10 −4 W m −1 K −2 in ScSb. The Nernst thermopower (𝑆 𝑥⁢𝑦 ) exhibits a peak of ∼ 47 µ⁢V/K at 12 K and 14 T, yielding a Nernst figure of merit (𝑧 𝑁 ) of ∼ 28 × 10 −4 K −1 . Notably, despite its trivial electronic band structure, both the 𝑃⁢𝐹 𝑁 and 𝑧 𝑁 values of ScSb are comparable to those observed in topological semimetals with Dirac band dispersions. In conclusion, the origin of the large Nernst signal in ScSb is explained by compensated electron and hole carriers, through Hall resistivity measurements, angle-resolved photoemission spectroscopy, and density functional theory calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Engineering diamond interfaces free of dark spins

Nitrogen-vacancy (NV) centers in diamond are utilized extensively as quantum sensors for imaging fields at the nanoscale. The ultrahigh sensitivity of NV magnetometers has enabled the detection and spectroscopy of individual electron spins, with potentially far-reaching applications in condensed matter physics, spintronics, and molecular biology. However, the surfaces of these diamond sensors naturally contain electron spins, which create a background signal that can be hard to differentiate from the signal of the target spins. In this study, we develop a surface modification approach that eliminates the unwanted signal of these so-called dark electron spins. Our surface passivation technique, based on coating diamond surfaces with a thin titanium oxide (Ti⁢O 2 ) layer, reduces the dark spin density. The observed reduction in dark spin density aligns with our findings on the electronic structure of the diamond-Ti⁢O 2 interface. The reduction, from a typical value of 2000 μm −2 to a value below that set by the detection limit of our NV sensors (200 μm −2 ), results in a twofold increase in Hahn-echo coherence time of near surface NV centers. Furthermore, we derive a comprehensive spin model that connects dark spin relaxation with NV coherence, providing additional insights into the mechanisms behind the observed spin dynamics. Our findings are directly transferable to other quantum platforms, including nanoscale solid-state qubits and superconducting qubits.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Site-Selective Modification of Lanthanum Oxychloride to Modulate Halide-Ion Conduction

Design principles for solid-state halide-ion conduction remain poorly defined despite the increasing importance of halide ions as charge carriers in a variety of energy storage and electrochemical computing technologies. Here, we employ a siteselective modification strategy in which aliovalent cations are preferentially introduced at the La 3+ crystallographic site of LaOCl in the 2c Wyckoff position, enabling controlled generation of chloride vacancies and modification of lattice dynamics to enhance chloride-ion conductivity. Aliovalent substitution of La 3+ with Mg 2+ , Ca 2+ , and Sr 2+ generates charge-compensating Cl vacancies while preserving the matlockite crystal structure. X-ray excited optical luminescence measurements with Dy 3+ as a reporter chromophore evidence vacancy-derived midgap electronic states and an extended energy range of radiation-less Auger electron emission corresponding to substantial modification of electronic structure and local electrostatic potentials. Ca alloying at 8−10 at. % increases the chloride-ion conductivity by three- to 4 orders of magnitude as compared to unalloyed LaOCl, whereas comparable amounts of Sr- and Mg-alloying in LaOCl imbue less pronounced conductivity enhancements. Temperature-dependent Raman spectroscopy measurements reveal that Ca- and Sr-alloying substantially soften the La−Cl sublattice and yield a more compliant crystal lattice that can deform to accommodate Cl-ion migration. Structure solutions derived from Rietveld refinements to powder Xray diffraction reveal larger O−La−Cl bond-angle deviations and enhanced out-of-plane cation displacements for Ca- and Sr-alloyed compositions as compared to Mg-alloyed LaOCl. Such local distortions enhance chloride-ion mobility by reshaping and flattening vacancy migration energy landscapes and by modulating lattice dynamics governing anion conduction. We further illustrate that coalloying of Ca with Mg and Sr induces a nonmonotonic conductivity−defect stoichiometry relationship that can be rationalized based on cooperative interactions. Together, these results establish site-selective aliovalent alloying of LaOCl as an effective route to halide-ion solid electrolytes and provide broadly generalizable design principles for site-selective modification to induce vacancy formation and lattice softening to engender facile anion transport

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structural, Electronic, and Photophysical Insights into a Few Atom Copper-Sulfur Cluster in the Solid and Solution States

Coinage-metal chalcogenide clusters are widely studied for their attractive photoluminescence properties. Copper chalcogenides are especially promising, but are often confined to solid-state investigations due to their limited solution stability and the difficulty of synthesizing stable, well-defined clusters. Here, we investigate copper–sulfur clusters incorporating a small number of Cu atoms to elucidate fundamental atomic interactions, ground- and excited-state characteristics, and photophysical behavior in both solid and solution. We have synthesized the Cu6(4,6-dimethyl-2-mercaptopyrimidine)6 cluster in both neutral and charged states, Cu6 and Cu6-2H2+, respectively, by selective ligand protonation. The molecular structures are determined using single-crystal X-ray diffraction, while Cu K-edge X-ray absorption spectroscopy is used to probe Cu electronic structure differences arising from the ligand modification. Steady-state and pump-probe optical spectroscopy is used to investigate photophysical properties, interpreted using density functional theory methods. Both clusters exhibit good stability in the solid state and in solution and show characteristic near-infrared emission with microsecond lifetimes. Overall, the Cu6S6 clusters display favorable charge–transfer characteristics and show potential for further use in driving photochemical transformations.

Copper-sulfur clusters↗
DOE OSTI2026

Data-Driven Discovery and Experimental Validation of Solvent Polarity Effects on Conjugated Polymer Solution-to-Film Assembly Pathways

Understanding how solvent properties influence the solution-to-film assembly of conjugated polymers remains a critical challenge due to the complex and intertwined nature of polymer–solvent interactions. In this study, we integrate a data-driven framework with experimental validation to identify key parameters influencing the assembly and performance of poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (DPP-DTT) in organic field-effect transistors (OFETs). A machine learning (ML) approach identified the normalized Reichardt polarity parameter (E T N ) as a significant descriptor correlated with DPP-DTT hole mobility (μ). Systematic DPP-DTT devices fabricated using solvents across a wide E T N range revealed that higher E T N solvents yield enhanced μ. To elucidate the structural origins of high μ, we conducted comprehensive analyses using UV–vis–NIR spectroscopy and grazing incidence wide angle X-ray scattering (GIWAXS) measurements. The results revealed that films processed from high E T N solvents exhibit reduced paracrystallinity. By analyzing the solution-state behavior using optical microscopy and solution WAXS, we revealed polymer solubility differences in the various solvents and associated distinct polymer assembly pathways, elucidating why the high E T N solvent produces long-range ordered films. Notably, the high E T N solvent shows a pronounced preference for liquid-crystal (LC)-mediated assembly, providing a mechanistic explanation for the enhanced structural order. Therefore, these results demonstrate that solvent polarity, as evaluated by E T N , serves as an important parameter that plays a significant role in the DPP-DTT assembly pathway and resultant solid-state morphology. This work provides a strategy for integrating data science with experiments to identify critical parameters associated with complex polymer systems and helps guide rational process design for high-performance organic electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Temperature Dependence of 239 Pu NMR Parameters in PuO 2

Solid-state 239 Pu NMR spectra of crystalline PuO 2 have been recorded over temperatures from 11 to 295 K with better than part per thousand resolution. These experiments represent the first independent detection of 239 Pu NMR in PuO 2 since the original report by Yasuoka and co-workers and extend the NMR observations to higher temperatures where recent theoretical explanations of the enigmatic magnetism and electronic structure of PuO 2 may be evaluated. The sensitivity achieved in these experiments was sufficient to measure the sinusoidal dependence of the NMR signal amplitude on the radiofrequency pulse length, which allows the determination of the nuclear g factor and magnetic moment of 239 Pu. These results demonstrate the use of NMR with an open-shell f element to explore subtle magnetic effects in plutonium materials of both technological and scientific significance.

Actinides↗
DOE OSTI2026

Ionic-Based Electrochemical Gas Sensors for Low-Cost, High-Sensitivity SO2 Detection

Sulfur dioxide (SO2) is a toxic gas associated with adverse health and environmental effects that necessitate reliable monitoring techniques. Here, we report the development of an all-solid-state electrochemical sensor utilizing a lithium borate (Li3BO3) solid electrolyte capable of subppm of SO2 detection. While subppm of SO2 sensing has been previously demonstrated in other solid-state electrolyte systems─such as stabilized zirconia, natrium super ionic conductors (NASICON) under mixed-potential conditions─here we establish Li3BO3 as an alternative solid electrolyte enabling equilibrium potentiometric sensing in an all-solid architecture. This sensor demonstrates a detection limit of at least 0.25 ppm, surpassing the human-olfactory threshold and meeting the rigorous requirements for industrial and personal monitoring applications. The sensing mechanism relies on the formation of Li2SO4 on the electrode surface, as evidenced by multimodal characterization techniques, including Raman spectroscopy, scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM). The strong linear correlation between the open-circuit potential (OCV) and the logarithm of SO2 concentration between 0.25 and 2 ppm indicates that the response is Nernstian in nature.

Lagunas, Francisco (ORCID:000000026377683X)↗
DOE OSTI2025

Nanoscale Miscibility in In Situ Polymerized Hybrid Electrolytes Speeds Up Ion Dynamics and Enables Stable Cycling of Li Metal Batteries

While the potential use of copolymerized electrolytes in Li metal batteries is subject to intense investigation, the fundamental understanding of the nanoscale domain formation and its effect on Li + transport is still lacking. In this study, we investigated the correlation between the Li + transport mechanism and the miscibility of monomers in polymer blend electrolytes derived from the in situ copolymerization of methyl methacrylate (MMA) and vinylene carbonate (VC) in the presence of polyethylene glycol dimethyl ether (PEGDME) plasticizer and bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. The addition of a polar short chain plasticizer reduced the dynamic and structural heterogeneities of the electrolyte. Small-angle X-ray scattering (SAXS) measurements and coarse-grained molecular dynamics (MD) simulations were used to investigate the nanoscale structure of the electrolytes. The distribution of relaxation times corresponding to the three distinct diffusion mechanisms of the free and interfacial Li + ions at the copolymer/plasticizer and electrolyte/SEI boundaries was analyzed in a broad temperature range to elucidate the Li + transport mechanism. Furthermore, the chemical composition of the SEI and the contribution of a ceramic lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) phase on the interfacial resistance, salt degradation, and SEI stability were studied by X-ray photoelectron spectroscopy (XPS) depth profile analysis and electrochemical testing.

Li metal↗
DOE OSTI2026

Magic Diamond: Covalent Bond Formation of Melamine and Other Amines on Nanodiamond Surfaces

High-temperature, high-pressure (HPHT) nanodiamond (ND) hosts nitrogen-vacancy (NV) centers, solid-state qubits that enable room-temperature quantum sensing by all-optical magnetometry, electrometry, and thermometry. However, the covalent surface functionalization of nanoscale diamond remains largely limited to carboxylate-based chemistries. Amine termination is particularly attractive because theoretical studies predict suppression of midgap states and extended electron-spin coherence times. Recently, chemical activation of alcohol-terminated NDs to alkyl bromides (ND-Br) using SOBr2 has enabled nucleophilic substitution through a carbocation intermediate, allowing formation of simple amine terminations. Here, we evaluate whether sterically demanding amines can form covalent diamond−nitrogen bonds on ND-Br surfaces. ND-Br was reacted with branched, linear, and cyclic amines, including polyethylenimine, diethylenetriamine, and melamine. X-ray spectroscopies were used to confirm successful and to probe the resulting electronic structure at the diamond−amine interface. These results expand the chemical toolbox for tuning diamond surface dipoles and electron affinity, providing new pathways for engineering nanodiamond surfaces for quantum sensing and photocatalysis applications.

Amines↗
DOE OSTI2026

Precursor-Dependent Routing of Aromatic Amino Acids Determines Lignin Structure in Grasses by Sensitivity-Enhanced Solid-State NMR

Lignin biosynthesis in grasses exhibits unique metabolic flexibility, yet the precursor-specific routing of carbon into lignin polymers remains poorly resolved in planta. Here, we combine 13 C-isotope labeling with solid-state NMR under sensitivity-enhancement by dynamic nuclear polarization (DNP), to directly track phenylalanine- and tyrosine-derived carbon incorporation into the lignin polymer in Brachypodium distachyon. Precursor-specific 13 C labeling reveals that phenylalanine is the dominant contributor to canonical guaiacyl and syringyl lignins, whereas tyrosine preferentially enriches hydroxyphenyl lignin and hydroxycinnamates, including ferulates characteristic of grass cell walls. Two-dimensional 13 C− 13 C correlation NMR resolves distinct lignin moieties arising from each precursor. Disruption of pcoumarate 3-hydroxylase (C3H) selectively impairs phenylalanine-derived lignification, while tyrosine-derived lignin remains comparatively unchanged, maintaining polymer assembly through alternative metabolic routes. These findings show precursordependent control of lignin composition and reveal tyrosine-mediated lignification as a compensatory pathway in grasses. This work also establishes precursor-resolved solid-state NMR and DNP as a powerful framework for dissecting lignin biosynthesis and metabolic plasticity in plant cell walls.

Biopolymers↗
DOE OSTI2026

Photoinduced Electron-Transfer Distance Is Controlled by the Driving Force in Solid-State Organic Donor-Acceptor Systems

Understanding how short-range electron transfer generates photocurrent in organic solar cells and what photochemical driving force is needed to maximize efficiencies has been an immensely difficult problem. Here we show how these questions are intertwined: the driving force controls the average charge-transfer distance, skipping the shortest-range states in the optimal case. Using photoinduced absorption-detected magnetic resonance, we measure average charge-separation distances in dilute donor–acceptor blends as a function of driving force, and compare these with free charge yields measured by time-resolved microwave conductivity. We find that the largest driving forces show the shortest charge-separation distances, explaining their suppressed free-carrier generation. These results support a long-range electron-transfer model, wherein the driving force controls the initial delocalization of the electron–hole pair. The minimum driving force required for efficient charge separation (and minimal voltage losses) is ultimately set by the dielectric constant of the material.

14 SOLAR ENERGY↗
DOE OSTI2026

Synthesis and characterization of 5,15-bis(hydroxymethyl)porphyrins – simple compounds distantly inspired by the chlorosomal bacteriochlorophylls

A self-assembly paradigm is provided in green photosynthetic bacteria by the chlorin macrocycle bacteriochlorophyll (BChl) c, which contains a 3-(1-hydroxyethyl) substituent, central magnesium ion, and 13-keto group. The assembled BChl c structure is a powerful light-harvesting apparatus that can support life even under extreme low-light conditions. Here, inspired by the work of Balaban, two far simpler porphyrins have been synthesized, 5,15-bis(hydroxymethyl)-10,20-diphenylporphinatozinc(II) (Ph/CH 2 OH) and 5,15-bis(hydroxymethyl)porphinatozinc(II) (H/CH 2 OH), and analogues wherein ethyl replaces hydroxymethyl (Ph/Et and H/Et). Examination of Ph/CH 2 OH and H/CH 2 OH by time-resolved spectroscopy showed an ∼2-fold enhancement in the singlet excited-state lifetime compared to meso-tetraphenylporphinatozinc(II) (ZnTPP). The single-crystal X-ray diffraction revealed distinct packing patterns. Porphyrin Ph/CH 2 OH exhibited double staircases wherein (1) each zinc is pentacoordinate (by apical coordination of one hydroxymethyl group of a porphyrin in the same staircase), (2) the second hydroxymethyl group is hydrogen-bonded to an apically coordinated hydroxymethyl oxygen atom in the adjacent staircase, (3) the porphyrins in a given staircase are coplanar but cofacially offset with each other, and (4) the adjacent staircases are oriented approximately 72° relative to each other. Porphyrin H/CH 2 OH assembled wherein (1) each zinc is hexacoordinate by ligation of hydroxymethyl moieties, (2) each hydroxymethyl –OH is hydrogen-bonded with an acetonitrile solvent molecule in the lattice, and (3) the planes of the four nearest neighbor porphyrins are essentially perpendicular to a given porphyrin. Study of the solid-state packing patterns of sparsely substituted porphyrins enables insights into how the structural design of tetrapyrroles can guide their aggregate self-assembly.

Tran, Vy-Phuong [North Carolina State University, ↗
DOE OSTI2026

Leveraging the redox activities of cerium and dibenzotetrathiafulvalene to discover a photo-responsive magnetic material

Stimuli-responsive changes in lanthanide-based materials are a promising research direction. In this study, [DBTTF] 4 [Ce 2 Cl 10 ] DBTTF = dibenzotetrathiafulvalene (1) was synthesized by a light-induced crystallization, where photo-oxidation of DBTTF enables formation of the cerium dimer [Ce 2 Cl 10 ] 4− . Intermolecular interactions between the stacked organic units of the crystal result in charge transfer bands in the visible-NIR (near-infrared) region, evident in the solid-state absorption spectrum upon comparison with the solution spectrum. The assignments of the sublattice oxidation states were made with single-crystal X-ray diffraction (SC-XRD) structural characterization, Raman spectroscopy, X-ray absorption spectroscopy, and magnetometry. Continuous 532 nm laser irradiation of the microcrystalline solid modulates the redox states in 1, leading to ∼40% reduction in the observed magnetization at 2 K. Density functional theory PBE+U/HSE06 band structure calculations predict Mott insulating behavior in 1, with a bandgap of 0.54/0.81 eV, and further support the conjecture that the observed photo-induced change in magnetization results from electron transfer from the [Ce 2 Cl 10 ] 4− anions to the π-stacked [DBTTF] 2 2+ organic dimer subunits. An enhancement in conductivity is similarly observed upon 532 nm irradiation, determined by single-crystal transport measurements. The findings reveal that photo-responsive lanthanide-based materials can be achieved by integration of redox-active organic moieties with redox-active lanthanide cations for the realization of switchable, photo-magnetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electric Field Control of Phonon Lifetimes and Thermal Conductivity in Relaxor-Based Ferroelectric

The demand for high energy efficiency drives intense interest in thermal-management technology. Phonons are a major contributor to heat transfer in solids and controlling them through external stimuli is a key challenge for thermal management due to their weak interactions with applied fields. We report significant changes in phonon transport with the application of an electric field over a broad temperature range in a relaxor-based ferroelectric using neutron-scattering and -transport measurements. Phonon lifetimes increase along the applied poling field and this results in a tripling of the thermal conductivity in that direction. We also observe a suppression of nanoscale antiferroelectric fluctuations along the poling direction and argue that this increases the phonon lifetimes. Our results highlight a promising yet underexplored route to realistic solid-state heat switching from electric-field-modified nanostructures altering the phonon lifetimes in disordered functional materials.

Phonons↗
DOE OSTI2025

Erbium quantum memory platform with long optical coherence via back-end-of-line deposition on foundry-fabricated photonics

Realizing scalable quantum interconnects necessitates the integration of solid-state quantum memories with foundry photonics processes. While prior photonic integration efforts have relied upon specialized, laboratory-scale fabrication techniques, this work demonstrates the monolithic integration of a quantum memory platform with low-loss foundry photonic circuits via back-end-of-line deposition. We deposited thin films of titanium dioxide (Ti⁢O 2 ) doped with erbium (Er) onto silicon nitride nanophotonic waveguides and studied Er optical coherence at subkelvin temperatures with photon echo techniques. Furthermore, we suppressed optical dephasing through ex-situ oxygen annealing and optimized measurement conditions, which yielded an optical coherence time of 64 μ⁢s (a 5-kHz homogeneous linewidth) and slow spectral diffusion of 27 kHz over 4 ms, results that are comparable to state-of-the-art Er nanophotonic devices. Combined with second-long electron spin lifetimes and demonstrated electrical control of Er emission, our findings establish Er:Ti⁢O 2 on foundry photonics as a manufacturable platform for ensemble and single-ion quantum memories.

Electro-optic effects↗
DOE OSTI2026

Non-Invasive Electrode Impedance Estimation for Optimized Charge Profile Parameterization of Lithium-Ion Batteries

This work presents a non-invasive method for parameterizing a physically motivated equivalent circuit model of lithium-ion batteries using operando electrochemical impedance spectroscopy and time-domain data. The proposed model consists exclusively of linear circuit elements, enabling computationally efficient simulation and real-time implementation on battery management system chips. By integrating frequency- and time-domain measurements, the model accurately estimates internal states such as the negative electrode potential, achieving a root mean square error of 12.3 mV during fast charging validation. Parameterization requires only rate tests with sinusoidal perturbations at three different ambient temperatures, making the approach experimentally accessible. The model reveals key insights into battery behavior, including rate-dependent overpotentials primarily governed by charge transfer kinetics at the positive electrode, and temperature-dependent impedance contributions from both charge transfer and solid-state diffusion processes. Validation using reference electrodes confirms the model’s ability to detect lithium plating onset and reproduce impedance behavior across a wide range of operating conditions. The approach enables in situ optimization of fast charging profiles and lays the foundation for future extensions incorporating aging effects and plating dynamics.

25 ENERGY STORAGE↗