Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scale-models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

106 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Data Quality Assurance for Supersonic Jet Noise Measurements

The noise created by a supersonic aircraft is a primary concern in the design of future high-speed planes. The jet noise reduction technologies required on these aircraft will be developed using scale-models mounted to experimental jet rigs designed to simulate the exhaust gases from a full-scale jet engine. The jet noise data collected in these experiments must accurately predict the noise levels produced by the full-scale hardware in order to be a useful development tool. A methodology has been adopted at the NASA Glenn Research Center s Aero-Acoustic Propulsion Laboratory to insure the quality of the supersonic jet noise data acquired from the facility s High Flow Jet Exit Rig so that it can be used to develop future nozzle technologies that reduce supersonic jet noise. The methodology relies on mitigating extraneous noise sources, examining the impact of measurement location on the acoustic results, and investigating the facility independence of the measurements. The methodology is documented here as a basis for validating future improvements and its limitations are noted so that they do not affect the data analysis. Maintaining a high quality jet noise laboratory is an ongoing process. By carefully examining the data produced and continually following this methodology, data quality can be maintained and improved over time.

Brown, Clifford A.↗
NASA NTRS2012

Acoustic Surveys of a Scaled-Model CESTOL Transport Aircraft in Static and Forward Speed Conditions

An 11% scale-model of a Cruise-Efficient Short Take-off and Landing (CESTOL) scalemodel test was recently completed. The test was conducted in the AEDC National Full-Scale Aerodynamic Complex (NFAC) 40- by 80-Foot Wind Tunnel at NASA Ames Research Center. The model included two over-wing pod-mounted turbine propulsion simulators (TPS). The hybrid blended wing-body used a circulation control wing (CCW) with leadingand trailing-edge blowing. The bulk of the test matrix included three forward velocities (40 kts, 60 kts, and 100kts), angle-of-attack variation between -5 and 25 , and CCW mass flow variation. Seven strut-mounted microphones outboard of the left wing provided source directivity. A phased microphone array was mounted outboard of the right wing for source location. The goal of this paper is to provide a preliminary look at the acoustic data acquired during the Advanced Model for Extreme Lift and Improved Aeroacoustics (AMELIA) test for 0 angle-of-attack and 0 sideslip conditions. Data presented provides a good overview of the test conditions and the signal-to-noise quality of the data. TPS height variation showed a difference of 2 dB to 3 dB due to wing shielding. Variation of slot mass flow showed increases of 12 dB to 26 dB above the airframe noise and the TPS increased the overall levels an additional 5 dB to 10 dB.

Burnside, Nathan↗
NASA NTRS2014

Noise from Aft Deck Exhaust Nozzles: Differences in Experimental Embodiments

Two embodiments of a rectangular nozzle on an aft deck are compared. In one embodiment the lower lip of the nozzle was extended with the sidewalls becoming triangles. In a second embodiment a rectangular nozzle was fitted with a surface that fit flush to the lower lip and extended outward from the sides of the nozzle, approximating a semi-infinite plane. For the purpose of scale-model testing, making the aft deck an integral part of the nozzle is possible for relatively short deck lengths, but a separate plate model is more flexible, accounts for the expanse of deck to the sides of the nozzle, and allows the nozzle to stand off from the deck. Both embodiments were tested and acoustic far-field results were compared. In both embodiments the extended deck introduces a new noise source, but the amplitude of the new source was dependent upon the span (cross-stream dimension) of the aft deck. The noise increased with deck length (streamwise dimension), and in the case of the beveled nozzle it increased with increasing aspect ratio. In previous studies of slot jets in wings it was noted that the increased noise from the extended aft deck appears as a dipole at the aft deck trailing edge, an acoustic source type with different dependence on velocity than jet mixing noise. The extraneous noise produced by the aft deck in the present studies also shows this behavior both in directivity and in velocity scaling.

Bridges, James E.↗
NASA NTRS2014

Noise from Aft Deck Exhaust Nozzles: Differences in Experimental Embodiments

Two embodiments of a rectangular nozzle on an aft deck are compared. In one embodiment the lower lip of the nozzle was extended with the sidewalls becoming triangles. In a second embodiment a rectangular nozzle was fitted with a surface that fit flush to the lower lip and extended outward from the sides of the nozzle, approximating a semi-infinite plane. For the purpose of scale-model testing, making the aft deck an integral part of the nozzle is possible for relatively short deck lengths, but a separate plate model is more flexible, accounts for the expanse of deck to the sides of the nozzle, and allows the nozzle to stand off from the deck. Both embodiments were tested and acoustic far-field results were compared. In both embodiments the extended deck introduces a new noise source, but the amplitude of the new source was dependent upon the span (cross-stream dimension) of the aft deck. The noise increased with deck length (streamwise dimension), and in the case of the beveled nozzle it increased with increasing aspect ratio. In previous studies of slot jets in wings it was noted that the increased noise from the extended aft deck appears as a dipole at the aft deck trailing edge, an acoustic source type with different dependence on velocity than jet mixing noise. The extraneous noise produced by the aft deck in the present studies also shows this behavior both in directivity and in velocity scaling.

Bridges, James↗
NASA NTRS2017

Inlet Acoustic Data from a High Bypass Ratio Turbofan Rotor in an Internal Flow Component Test Facility

In February 2017, aerodynamic and acoustic testing was completed on a scale-model high bypass ratio turbofan rotor, R4, in an internal flow component test facility. The objective of testing was to determine the aerodynamic and acoustic impact of fan casing treatments designed to reduce noise. The baseline configuration consisted of the R4 rotor with a hardwall fan case. Data are presented for a baseline acoustic run with fan exit instrumentation removed to give a clean acoustic configuration.

Turbofan↗
NASA NTRS2017

W-8 Acoustic Casing Treatment Test Overview

During February 2017, aerodynamic and acoustic testing was performed on a scale-model high bypass ratio turbofan rotor, R4, in an internal flow component test facility. An overview of the testing completed is presented.

Propulsion↗
NASA NTRS2017

Inlet Acoustic Data from a High Bypass Ratio Turbofan Rotor in an Internal Flow Component Test Facility: Supplemental Data Files

In February 2017, aerodynamic and acoustic testing was completed on a scale-model high bypass ratio turbofan rotor, R4, in an internal flow component test facility. The objective of testing was to determine the aerodynamic and acoustic impact of fan casing treatments designed to reduce noise. The baseline configuration consisted of the R4 rotor with a hardwall fan case. Data are presented for a baseline acoustic run with fan exit instrumentation removed to give a clean acoustic configuration.

Bozak, Richard F.↗
NASA NTRSDate not supplied

Characterization of Structural Vibration and Acoustic Radiation with a Beam-Array Doppler Vibrometer

This paper discusses the operational principles of an assembly of two opto-electronic modules with their configurations based on a Laser-Array Doppler Vibrometer (LADV) and a Shack-Hartmann Wavefront Sensor (SHWFS). Both sensors can operate concurrently providing complementary data. While the SHWFS is a well-established system that enables low-bandwidth spatio-temporal characterization of aerodynamic turbulence, the LADV technology allows real-time detection of structural vibrations and associated acoustic radiation fields. Practical examples are shown of the instruments’ capabilities, focusing on the ability to simultaneously capture, visualize and quantitatively characterize full-field non-stationary structural dynamics and unsteady sound fields or transient flow fields around ground test facility airframe models or other structures of interest. The parallel multi-channel architecture of the LADV system enables synchronous detection and temporal correlation of indicators related to the spatio-temporal vibration of the structure under inspection. This unique feature is essential for real time detection and categorization of the structural and acoustic dynamics of transient events. For the present study, the LADV data have been successfully compared with measurements obtained with the SHWFS in the wake of a subsonic scale-model airfoil. The ability of the LADV-SHWFS coupled measurements to perform real time non-intrusive evaluation and characterization of dynamic processes at operationally relevant bandwidths should provide a deeper insight into the complex structural dynamics that contribute to radiated sound fields.

Vladimir B Markov↗
NASA NTRSDate not supplied

Status of Learjet Flight Test and Jet Noise Modeling

The status of a future jet-noise test using a Lear 25 aircraft is provided. The intent of the test is to provide data for comparisons with scale-model data acquired in the Aero-Acoustic Propulsion Laboratory (AAPL). Preliminary results from a jet-noise model based on data acquired in AAPL are also presented.

Brenda Henderson↗
NASA NTRSDate not supplied

Learjet Flight Test Update

The status of the future jet-noise test using a Lear 25 aircraft is provided. The intent of the test is to provide data for comparisons with scale-model data acquired in the Aero-Acoustic Propulsion Laboratory (AAPL) and a new single-stream jet noise model.

Jet Noise↗
NASA NTRSDate not supplied

Learjet Flight Test Update

The presentation provides an update on progress towards an acoustic test with a Lear 25 aircraft. The intent of the test is to acquire data that will be used to determine the ability to predict jet noise for future supersonic aircraft at takeoff from scale-model data acquired in wind tunnels. Flight and instrumentation details are provided for the flight test planned for 2022.

Electric Motor Noise↗
NASA NTRSDate not supplied

Learjet Acoustics Flight Test – An Initial Look

The motivation for the work is the need for an improved ability to predict takeoff noise of future commercial supersonic aircraft. The overall objective is to validate as well as improve the conversion of facility scale-model data and semi-empirical jet-noise predictions to flight noise. As a first step, the processing of data and results from an acoustics flight test are described. The next step involves the comparison of the flight acoustic data and complementary rig-test results. This will be presented in future reports. Ultimately, the goal is improved noise-prediction methods for system studies of future commercial supersonic aircraft.

aeroacoustics, jet noise, flyover noise↗
NASA NTRSDate not supplied

XHAB - Inflatable Airlock

- Develop the requisite technology for airlock design via analysis and scale-model experimental tests - Design, develop, test, and evaluate a two-person inflatable airlock compatible with an international docking interface - Perform human operations evaluation in microgravity via neutral buoyancy simulation - Maximize opportunities for student involvement at all levels consistent with educational objectives for associated courses This document is best when downloaded and opened in Adobe 2020 version.

David Akin↗
NASA NTRSDate not supplied

Learjet Update Flight and Scale-Model-Nozzle Acoustics Test

The impetus for the work is the need for an improved ability to predict takeoff noise of future supersonic commercial transport aircraft. The overall objective is to validate as well as improve the conversion of facility scale-model data and semi-empirical jet-noise predictions to flight noise. Acoustic data from a Learjet-25 flyover test and a complementary rig-test are compared. The uncertainty in the rig-to-flight transformation is presented. Ultimately, the goal is improved noise-prediction methods for system studies of future commercial supersonic aircraft.

Lennart S Hultgren↗
NASA NTRS2024

Wind Tunnel Test of A Scale Model of A Venus Probe to Determine Aeroacoustics Environment

The Zephyr probe for NASA’s DAVINCI project is being designed to fly to Venus and collect measurements to characterize the Venusian atmosphere while it descends towards the surface. Despite a slow descent speed as the probe approaches the surface, the very dense atmosphere means the vibro-acoustic environment that the probe must withstand could be very harsh. A wind tunnel test campaign was conducted to characterize the surface-pressure fluctuations (acoustics) on the external surface of the probe during the descent. The goal was to provide forcing functions for vibro-acoustic analysis of all instruments inside the probe. A 25% scale-model of the Zephyr probe was manufactured, instrumented with 18 microphones, and tested in two wind tunnels located in the Fluid Mechanics Lab at NASA Ames Research Center at velocities ranging from 13 m/s to 48 m/s. Trip strips were added to the model to ensure a turbulent boundary layer on the model. Microphones were located appropriately to provide spectra of pressure fluctuations in regions with different flow characteristics as well as for calculating various two-point statistics. The acoustic spectra measured in the wind tunnel tests were scaled up to flight-scale using the estimated flight trajectory information. Besides fluctuating surface-pressure measurements, hot-film velocity measurements as well as smoke-laser flow visualization were conducted to better understand the flow around the probe. Lastly, several different geometry configurations were tested to see whether any reduction in acoustic levels could be achieved, but none of the configurations that were tested offered significant improvements. The flow visualization showed 3 primary flow regimes on the model: an attached turbulent boundary layer on the front of the model, a region of separated flow upstream of the flared lip, and a large, separated wake at the rear of the model. The acoustic spectra generally show three different shapes corresponding to these flow regions, with the highest levels seen at the rear of the model, and directly in front of the drag plate. The scaled overall levels of pressure fluctuations were found to be high: in the range of 130dB to 155dB.

planetary probe↗
NASA NTRS2022

Experimental and Computational Icing Simulation for Large Swept Wings

The purpose of this final report is to summarize the key results, findings and contributions of a large, multi-organization, multi-year effort focused on swept wing icing and aerodynamics. This research effort was jointly sponsored by NASA, FAA and ONERA and was supported by Boeing and the Universities of Illinois, Virginia, and Washington. The overall goal of this research was to improve the experimental and computational simulation capability for icing on large swept wings typical of commercial transports. This research included both ice accretion and aerodynamic studies using the NASA Common Research Model (CRM) as the reference geometry. For this work, a 65% scaled version—CRM65—was used as the full-scale baseline airplane geometry. This program marks the first non-proprietary research to generate and document full-scale swept wing ice accretions in an icing tunnel and then conduct semispan wing aerodynamic testing on scaled ice accretions at high Reynolds number (i.e., up to 11.9×106). During this work, several new experimental and computational techniques were developed or documented and new knowledge about swept wing icing aerodynamics was identified. All are documented in this report.

Aircraft icing↗