SEARCH · Engineering Papers

Results for “San Andreas Fault”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1969

Microwave radiometric studies and ground truth measurements of the NASA/USGS Southern California test site

The field measurement program conducted at the NASA/USGS Southern California Test Site is discussed. Ground truth data and multifrequency microwave brightness data were acquired by a mobile field laboratory operating in conjunction with airborne instruments. The ground based investigations were performed at a number of locales representing a variety of terrains including open desert, cultivated fields, barren fields, portions of the San Andreas Fault Zone, and the Salton Sea. The measurements acquired ground truth data and microwave brightness data at wavelengths of 0.8 cm, 2.2 cm, and 21 cm.

Edgerton, A. T.↗

NASA NTRS1974

Dynamic techniques for studies of secular variations in position from ranging to satellites

Satellite laser range measurements were applied to the study of latitude variation arising from polar motion, and the solid-earth and ocean tidal distortion of the earth's gravity field. Experiments involving two laser tracking stations were conducted. The relative location of one station with respect to the other was determined by performing simultaneous range measurements to a satellite from two stations several hundred kilometers apart. The application of this technique to the San Andreas Fault Experiment in California is discussed. Future capabilities of spacecraft equipped with laser retroreflectors include: (1) determination of the product of the earth's mass and gravitational constant; (2) measurement of crustal and tectonic motions; (3) determination of the elastic response of the solid-earth tidal forces; (4) measurement of the amplitudes and phase of certain components of the ocean tides; and (5) self-monitoring of the latitude and height variations of the tracking station.

Smith, D. E.↗

NASA NTRS1974

Dynamic techniques for studies of secular variations in position from ranging to satellites

Evaluation of numerous laser range data obtained in orbit determination experiments and by analysis of orbit perturbations due to solid-earth and ocean tides. Results obtained from both a single-laser tracking system and two-laser systems are discussed. With the introduction of radar altimeters, satellite-to-satellite tracking techniques, and more accurate laser data in greater quantities, significant improvements in the gravity field, GM, and station coordinates can be projected such that 10-cm precision relative positioning should be a realizable objective from a single four-pass orbital arc. The use of simultaneous range measurements to a satellite from two stations several hundred km apart is being used to measure the motion between points 900 km apart on opposite sides of the San Andreas fault. Computer simulation of this experiment shows that it will permit determination of the change in baseline (plate motion) to better than 0.5 cm/yr over a seven-year period.

Smith, D. E.↗

NASA NTRS1975

Error analysis for the proposed close grid geodynamic satellite measurement system (CLOGEOS)

The close grid geodynamic measurement system experiment which envisages an active ranging satellite and a grid of retro-reflectors or transponders in the San Andreas fault area is a detailed simulated study for recovering the relative positions in the grid. The close grid geodynamic measurement system for determining the relative motion of two plates in the California region (if feasible) could be used in other areas of the world to delineate and complete the picture of crustal motions over the entire globe and serve as a geodetic survey system. In addition, with less stringent accuracy standards, the system would also find usage in allied geological and marine geodesy fields.

Mueller, I. I.↗

NASA NTRS1975

Space technology putting it in the educational perspective

One of the precepts of the company was to provide educators with practical, innovative, and manageable audio-visual teaching aids in a wide spectrum of educational fields, but primarily geography, geology and social science. A pilot slide set was prepared, demonstrating primary areas along the entire length of the San Andreas Fault Zone in California and Mexico. This set utilized several NASA infrared research aircraft photos, to more clearly delineate fault traces. A decision was made to mount a massive program of repackaging NASA generated infrared aircraft imagery into topical teaching sets.

Hankins, D. B.↗

NASA NTRS1977

Geodetic applications of laser ranging

The paper describes the use of dynamic methods of laser ranging of a low altitude satellite along with proposed experiments involving both dynamic and geodetic methods of laser ranging of the Lageos satellite. Particular attention is given to the testing of laser ranging techniques across the San Andreas Fault in California where it is hoped that plate motion will be observable after several years of measurements.

Smith, D. E.↗

NASA NTRS1978

A proposed test area for the spaceborne geodynamic ranging system

Precise geodetic measurements are proposed in which an orbiting laser obtains intersite distance between retroreflectors 25 to 100 km apart on the ground. The recommended area is a rectangle 200 by 400 km in southern California and adjacent Nevada, trending northeast. It includes the entire width of the San Andreas fault zone, the Garlock fault, the thrust faults of the Transverse Ranges, and the active strike-slip faults of the Mojave Desert.

Lowman, P. D., Jr.↗

NASA NTRS1978

A high speed pointing system

A laser ranging system for use with the Space Shuttle, and applied to a precise determination of the distance between points arrayed on different tectonic plates, i.e., along the San Andreas fault, spaced at distances of 25, 50, and 100 km, is discussed with attention to the orbiting pointing system. The mount carrying the system contains a single elliptical mirror which directs ten laser firings per second (15-18 firings to each target), and receives the light reflected from the target. The mirror and all moving structural parts are constructed of Be. The axes are equipped with 19-bit shaft angle encoders and brushless torque motors. Care is taken to avoid structural resonances, and to ensure a minimum of servo settling time. A Kalman filter is used with the microprocessor system to interpolate low data rate commands to the higher data rates required by the pointing system.

Winston, G. C.↗

NASA NTRS1978

Detection of crustal motion using spaceborne laser ranging systems

Laser ranging systems operated from space are capable of detecting motions on earth in the 2-5 cm range. Attention is given to the detection of crustal motion, specifically along the San Andreas fault, and a mathematical model is presented for a geometric mode system consisting of at least five grid and three distant (fundamental) stations to be operated with airborne and spaceborne lasers. The ground stations are designed to operate unattended, and to work in conjunction with Shuttle-based hardware to become operational in 1982. The Shuttle laser ranging system is expected to provide survey data within a period from one to two weeks, with a resurvey capability to be used as required.

Kumar, M.↗

NASA NTRS1980

Space Borne Event Timer

The Space Borne Event Timer is a part of the NASA laser ranging system that is intended to operate aboard the Space Shuttle orbiting over California. The object is to measure, by laser ranging, the earth movement along the San Andreas fault and possibly forecast future earthquakes. A number of cube reflector targets will be placed along both sides of the fault. The ranging system aboard the Space Shuttle will fire a burst of laser pulses at each target and detect the reflected light. Time differences between pulses from the two sides of the fault will indicate earth displacements. The Space Borne Event Timer is a CAMAC compatible system that provides extremely accurate timing data and controls the operation of the ranging system. For each event the time is given in 19.53 increments from the instant of firing the laser to the instant the reflected light is received back, within a range of 130 days.

Turko, B.↗

NASA NTRS1980

Time-dependent gravity in Southern California, May 1974 to April 1979

The Southern California gravity survey, begun in May 1974 to obtain high spatial and temporal density gravity measurements to be coordinated with long-baseline three dimensional geodetic measurements of the Astronomical Radio Interferometric Earth Surveying project, is presented. Gravity data was obtained from 28 stations located in and near the seismically active San Gabriel section of the Southern California Transverse Ranges and adjoining San Andreas Fault at intervals of one to two months using gravity meters relative to a base station standard meter. A single-reading standard deviation of 11 microGal is obtained which leads to a relative deviation of 16 microGal between stations, with data averaging reducing the standard error to 2 to 3 microGal. The largest gravity variations observed are found to correlate with nearby well water variations and smoothed rainfall levels, indicating the importance of ground water variations to gravity measurements. The largest earthquake to occur during the survey, which extended to April, 1979, is found to be accompanied in the station closest to the earthquake by the largest measured gravity changes that cannot be related to factors other than tectonic distortion.

Whitcomb, J. H.↗

NASA NTRS1984

A tomographic image of mantle structure beneath southern California

The variations in seismic structure beneath southern California were determined by using a tomographic method of inversion on teleseismic P delays recorded with the Southern California Array. The inversion reveals two prominent features beneath the region. The first is a thin, vertical wedge directly beneath the Transverse Ranges that is 2-3 percent faster than the surrounding region. This feature deepens to the east, attaining a maximum depth of about 250 km beneath the San Bernardino Mountains. The second feature is a major zone of low velocity material that is 2-4 percent slow under the Salton Trough rift valley, extending to a depth of about 125 km. Two possible explanations for the spatial association of the Transverse Ranges with the velocity anomaly below are lithospheric subduction or small-scale sublithospheric convection in the region of the Big Bend of the San Andreas Fault. The low velocity anomaly beneath the Salton Trough is consistent with convective upwelling there.

Humphreys, E.↗

NASA NTRS1985

Utilization of Mobile VLBI for Geodetic Measurements

Three mobile very long base interferometry (VLBI) systems were fabricated for the NASA Crustal Dynamics Project. These systems include the 9-meter-diameter MV-3 telescope. Since 1980, mobile systems operated in conjunction with several fixed base stations in the western United States as part of a geodetic survey program to determine relative motions and regional strain fields near the tectonic plate boundaries in California and Alaska. A description is given of the three mobile systems and the environment in which they must function. The inherent accuracy of mobile VLBI measurements is assessed, based on a consideration of major sources of error. Some recent results are presented which serve to illustrate various aspects of the error model and are of geodetic interest as they span the broad region surrounding the surface trace of the San Andreas Fault. These results indicate that baseline measurements utilizing the current mobile VLBI systems attained an accuracy of 2 cm or better in the horizontal plane. It is likely that crustal motions will be detected within the next few years, provided they are presently occurring at the geological rates.

Davidson, J. M.↗

NASA NTRS1985

Utilization of mobile VLBI for geodetic measurements

Davidson, J. M.↗

NASA NTRS1985

Analysis of a method for precisely relating a seafloor point to a distant point on land

A study of the environmental constraints and engineering aspects of the acoustic portion of a system for making geodetic ties between undersea reference points and others on land is described. Important areas in which to make such observations initially would be from the California mainland out to oceanic points seaward of the San Andreas fault, and across the Aleutian Trench. The overall approach would be to operate a GPS receiver in a relative positioning (interferometric) mode to provide the long range element of the baseline determination (10 to 1,000 km) and an array of precision sea floor acoustic transponders to link the locally moving sea surface GPS antenna location to a fixed sea floor point. Analyses of various environmental constrants (tides, waves, currents, sound velocity variations) lead to the conclusion that, if one uses a properly designed transponder having a remotely controllable precise retransmission time delay, and is careful with regard to methods for installing these on the sea floor, one should, in many ocean locations, be able to achieve sub-decimeter overall system accuracy. Achievements of cm accuracy or better will require additional understanding of time and space scales of variation of sound velocity structure in the ocean at relevant locations.

Spiess, F. N.↗

NASA NTRS1986

Plate motions and deformations from geologic and geodetic data

Research effort on behalf of the Crustal Dynamics Project focused on the development of methodologies suitable for the analysis of space-geodetic data sets for the estimation of crustal motions, in conjunction with results derived from land-based geodetic data, neo-tectonic studies, and other geophysical data. These methodologies were used to provide estimates of both global plate motions and intraplate deformation in the western U.S. Results from the satellite ranging experiment for the rate of change of the baseline length between San Diego and Quincy, California indicated that relative motion between the North American and Pacific plates over the course of the observing period during 1972 to 1982 were consistent with estimates calculated from geologic data averaged over the past few million years. This result, when combined with other kinematic constraints on western U.S. deformation derived from land-based geodesy, neo-tectonic studies, and other geophysical data, places limits on the possible extension of the Basin and Range province, and implies significant deformation is occurring west of the San Andreas fault. A new methodology was developed to analyze vector-position space-geodetic data to provide estimates of relative vector motions of the observing sites. The algorithm is suitable for the reduction of large, inhomogeneous data sets, and takes into account the full position covariances, errors due to poorly resolved Earth orientation parameters and vertical positions, and reduces baises due to inhomogeneous sampling of the data. This methodology was applied to the problem of estimating the rate-scaling parameter of a global plate tectonic model using satellite laser ranging observations over a five-year interval. The results indicate that the mean rate of global plate motions for that interval are consistent with those averaged over several million years, and are not consistent with quiescent or greatly accelerated plate motions. This methodology was also used to provide constraints on deformation in the western U.S. using very long baseline interferometry observations over a two-year period.

Jordan, T. H.↗

NASA NTRS1988

North America-Pacific plate boundary, an elastic-plastic megashear - Evidence from very long baseline interferometry

Data obtained by Mark III VLBI measurements of radio signals from permanent and mobile VLBI sites for 5.5 years of observations, starting in October 1982, were used to derive a picture of the earth crust deformation near the North America-Pacific plate boundary. The data, which included the vector positions of the VLBI sites and their rate of change, were used for comparison with a number of lithospheric deformation models based upon the concept that the motions of points near the North America-Pacific plate boundary are a linear combination of North America and Pacific velocities. The best of these models were found to fit 95 percent of the variance in 139 VLBI length and transverse velocity observations. Instantaneous shear deformation associated with plate tectonics is apparently developing in a zone 450 km wide paralleling the San Andreas Fault; some of this deformation will be recovered through elastic rebound, while the rest will be permanently set through plastic processes. Because the VLBI data have not been collected for a significant fraction of the earthquake cycle, they cannot discriminate between elastic and plastic behaviors.

Ward, Steven N.↗

NASA NTRS1988

Geodetic measurement of deformation in California

The very long baseline interferometry (VLBI) measurements made in the western U.S. since 1979 as part of the NASA Crustal Dynamics Project provide discrete samples of the temporal and spatial deformation field. The interpretation of the VLBI-derived rates of deformation requires an examination of geologic information and more densely sampled ground-based geodetic data. In the first two of three related studies embodying this thesis triangulation and trilateration data measured on two regional networks are processed, one in the central Mojave Desert and one in the Coast Ranges east of the San Andreas fault. At the spatial scales spanned by these local geodetic networks, auxiliary geologic and geophysical data have been utilized to examine the relation between measured incremental strain and the accommodation of strain seen in local geological structures, strain release in earthquakes, and principal stress directions inferred from in situ measurements. In the third study, VLBI data from stations distributed across the Pacific - North American plate boundary zone in the western United States are processed. The VLBI data have been used to constrain the integrated rate of deformation across portions of the continental plate boundary in California and to provide a tectonic framework to interpret regional geodetic and geologic studies.

Sauber, Jeanne Marie↗