Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STYRENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Styrene-terminated polysulfone oligomers as matrix material for graphite reinforced composites - An initial study

Results pertaining to graphite reinforced composites containing styrene-terminated oligomers as the matrix material are summarized. The processing parameters are determined and the properties of the resulting composite are evaluated. In terms of solvent impregnation techniques, CH2Cl2 is the preferred solvent due to its easy removal during the prepreg drying and consolidation steps.

Garcia, Dana↗

Photophysics of poly(2,3,4,5,6-pentafluoro styrene) film

The temperature-dependent steady-state emission, emission polarization anisotropy, and fluorescence-kinetics of poly(2,3,4,5,6-pentafluoro styrene) film are reported. Two interconverting excited-state conformations of the chromophore have been identified. The fluorescence of the higher energy conformation results from excitation on the red edge of the polymer absorption band at temperatures below 180 K. The energy barrier for conversion of the high energy conformer to the lower energy conformer is estimated to be E/hc = 27 + or - 7/cm. Electronic energy migration is not evident in this polymer.

O'Connor, Donald B.↗

Emission spectra and kinetics of copolymer films of styrene and 2,3,4,5,6-pentafluorostyrene

The temperature-dependent steady-state emission spectra and fluorescence kinetics of copolymer films of styrene and 2,3,4,5,6-pentafluorostyrene are reported. The polystyrene excimer emission is efficiently quenched in the presence of relatively small amounts of the pentafluorophenyl quencher in spite of the fact that direct energy transfer from the excimer to the quencher chromophores is not possible. The quenching of the polystyrene excimer emission at room temperature and of the polystyrene monomer emission at 13 K is attributed to the interception of the migrating monomer excitation by the quencher. The data suggest that this quenching mechanism is independent of temperature.

O'Connor, Donald B.↗

Styrene-Terminated Polysulfone Oligomers As Matrix Materials

Report summarizes preliminary experimental study and evaluation of styrene-terminated polysulfone oligomers as matrix materials in graphite-fiber/matrix composites. Composites evaluated in terms of methods of fabrication and of mechanical properties.

Bowles, Kenneth J.↗

Temperature dependence of electronic energy transfer and quenching in copolymer films of styrene and 2-(2'-hydroxy-5'-vinylphenyl)-2H-benzotriazole

Quenching of the emission of both the polystyrene monomer and the excimer for a series of varying composition copolymer films of styrene and 2-(2'-hydroxy-5'-vinylphenyl)-2H-benzotriazole is reported. The preponderance of quenching for both the monomer and excimer emissions is due to interception of the migrating excitation at the quencher site, although additional quenching results via long-range dipole-dipole energy transfer from the monomer and excimer traps to the quencher trap. The quenching of the monomer fluorescence and phosphorescence and that of the excimer fluorescence were found to be temperature independent over the ranges 14-58 and 191-296 K, respectively. Most significantly, it is concluded that the energy migration process is temperature independent over the range 14-296 K.

O'Connor, Donald B.↗

Study on the activation of styrene-based shape memory polymer by medium-infrared laser light

This paper demonstrates the feasibility of shape memory polymer (SMP) activation by medium-infrared laser light. Medium-infrared light is transmitted by an optical fiber embedded in the SMP matrix, and the shape recovery process and temperature distribution are recorded by an infrared camera. Light-induced SMP exhibits potential applications in biomedicines and flexible displays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface treatment with Fenton for separation of acrylonitrile-butadiene-styrene and polyvinylchloride waste plastics by flotation

Highlights: • Surface treatment with Fenton was developed for flotation separation of waste plastics. • Surface treatment changes selectively the floatability of ABS surface. • Mechanism of surface treatment was studied by FT-IR and XPS analysis. • Plastic mixtures with different particle sizes and mass fractions were separated effectively. - Abstract: Surface treatment with Fenton was applied to flotation separation of acrylonitrile-butadienestyrene (ABS) and polyvinylchloride (PVC). After treatment, the floatability of ABS has a dramatic decrease, while the floatability of PVC is not affected. Fourier transform infrared spectroscopy (FT-IR) spectra and X-ray photoelectron spectroscopy (XPS) spectra were recorded to ascertain the mechanism of Fenton treatment. FT-IR and XPS analysis confirms that the introduction of oxygen-containing group occurs on the surface of ABS. The optimum conditions are molar ration (H{sub 2}O{sub 2}:Fe{sup 2+}) 10000, H{sub 2}O{sub 2} concentration 0.4 M/L, pH 5.8, treatment time 2 min and temperature 25 °C, frother concentration 15 mg/L and flotation time 3 min. Particle sizes and mixing ratios were also investigated. Plastic mixtures of ABS and PVC with different particle sizes and mixing ratios can be effectively separated. The purity of ABS and PVC are up to 100% and 99.78%, respectively; the recovery of ABS and PVC are up to 99.89% and 100%, respectively. A practical, environmentally friendly and effective reagent, namely Fenton, was originally applied to surface treatment of ABS and PVC waste plastics for flotation separation of their mixtures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advancing ionomer design to boost interfacial and thin-film proton conductivity via styrene-calix[4]arene-based ionomers

Sub-micrometer-thick ion-conducting polymer (ionomer) layers often suffer from poor ionic conductivity at the substrate/catalyst interface. The weak proton conductivity makes the electrochemical reaction at the cathode of proton-exchange-membrane fuel cells sluggish. To address this, here we report on a class of polystyrene-based ionomers having sub-nanometer-sized, sulfonated macrocyclic calix[4]arene-based pendants (PS-calix). In films with thickness comparable to that of ionomer-based binder layers, the conductivity of PS-calix film (~41 mS/cm) is ~13 times higher than that of the current state-of-the-art ionomer, Nafion. We observe a similar improvement in proton conductivity when PS-calix interfaces with Pt nanoparticles, demonstrating the potential of PS-calix in catalyst ink. Leveraging a favorable interfacial chemical composition, PS-calix enhances proton conduction at the film-substrate interface, a shortcoming of Nafion. Moreover, the water in PS-calix films diffuses faster than bulk water and the water confined in Nafion films, suggesting an important role played by sub-nanometer-sized calix[4]arene cavities in creating unique water/ion transport pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigations on the Phase Diagram and Interaction Parameter of Poly(styrene-b-1,3-cyclohexadiene) Copolymers

A series of linear diblock copolymers containing polystyrene (PS) and poly(1,3-cyclohexadiene) (PCHD) with high 1,4-microstructure (>87%) was synthesized by anionic polymerization and high vacuum techniques. Microphase separation in the bulk was examined in this paper by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) and compared to computational analysis of the predicted morphological phase diagram for this system. Because of the high conformational asymmetry between PS and PCHD, these materials self-assemble into typical morphologies expected for linear diblock copolymer systems and atypical structures. Rheological measurements were conducted and revealed order–disorder transition temperatures (T ODT ), for the first time for PS-b-PCHD copolymers, resulting in a working expression for the effective interaction parameter χ eff = 32/T – 0.016. Furthermore, we performed computational studies that coincide with the experimental results. Finally, these copolymers exhibit well-ordered structures even at high temperatures (~260 °C) therefore providing a better insight concerning their microphase separation at the nanoscale which is important for their potential use in nanotechnology and/or nanolithography applications.

36 MATERIALS SCIENCE↗