SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mechanical properties of cross linked polymethyl methacrylate polymers in space environment - tensile stress-strain data, and stress relaxation and swelling measurements
A series of mechanical tests were conducted on a high-conductivity copper alloy, GRCop-84, in order to understand the time dependent response of this material. Tensile, creep, and stress relaxation tests were performed over a wide range of temperatures, strain rates, and stress levels to excite various amounts of time-dependent behavior. At low applied stresses the deformation behavior was found to be fully reversible. Above a certain stress, termed the viscoelastic threshold, irreversible deformation was observed. At these higher stresses the deformation was observed to be viscoplastic. Both reversible and irreversible regions contained time dependent deformation. These experimental data are documented to enable characterization of constitutive models to aid in design of high temperature components.
Rheology studies on polymer chemistry, plastic deformation, stress relaxation, and similar topics
Constitutive equations describing small perturbations on viscometric flows, noting relations with stress-relaxation moduli flow
Torsional creep measurements on natural rubber volcanizates cross linked to various degrees complement studies on stress relaxation behavior and dynamic mechanical response
Mechanical properties determined for cross linked polymethyl methacrylate under stress-relaxation test method
It is shown that magnetized plasma configurations under magnetic stress relax irreversibly to the state of minimum stress at a rate that is essentially Alfvenic provided a magnetic null is present. The relaxation is effected by the reconnection at the field null and proceeds at a rate proportional to the absolute value of ln(eta) exp-1, where eta is the resistivity. An analytic calculation in the linear regime is presented.
As microelectronic device dimensions are reduced below one micron, the hot carrier effect is a major barrier to continued scaling and VLSI reliability. Several reports have shown that fluorine diffusion into the device gate greatly enhances the resistance to hot carriers. There has been some disagreement as to the mechanism of influence; however, several reports have suggested that the polysilicon is physically modified by the fluorine implant and that the beneficial effects are at least in part due to stress relaxation in the polysilicon.
As part of a continued effort to improve the understanding of material time-dependent response, a series of mechanical tests have been conducted on the titanium alloy, Ti-6Al-4V. Tensile, creep, and stress relaxation tests were performed over a wide range of temperatures and strain rates to engage various amounts of time-dependent behavior. Additional tests were conducted that involved loading steps, overloads, dwell periods, and block loading segments to characterize the interaction between plasticity and time-dependent behavior. These data will be used to characterize a recently developed, viscoelastoplastic constitutive model with a goal toward better estimates of aerospace component behavior, resulting in improved safety.
The time-dependent behavior of composite laminates subjected to mechanical loads is studied using linear viscoelastic theory. Three-dimensional finite elements are formulated to solve the integral equilibrium equations. Analyses of creep and stress relaxation in composites with holes are performed. Results indicate that the relaxation of interlaminar stresses depends on temperature and layups, and that the creep response of strains is affected by stress redistribution between plies.
Geophysical quantities available over a continent are gravity and components of the magnetic field. Direct inferences on crustal structure are difficult to make and strongly dependent on mechanical assumptions the isostatic state. The data for Australia represents one of the best continental scale gravity surveys. The gravity anomalies are generally bland over the continent which confirms that stress relaxation and erosion and rebound were instrumental in reducing nonhydrostatic stresses. In central Australia very large gravity anomalies occur and the region is out of isostatic equilibrium despite the fact that tectonic activity ceased 300 ma ago. The isostatic response functions points to a substantial horizontal compression in the crust. Similar conclusions are drawn for the large anomalies in western Australia. The tectonic implications of these anomalies are examined. In eastern Australia the gravity anomalies are explained in terms of a model of erosion of the highlands and concomitant regional isostatic rebound.
A study was conducted to determine the processes which govern dwell notch low cycle fatigue (NLCF) behavior of a powder metallurgy (P/M) ME3 disk superalloy. The emphasis was placed on the environmentally driven mechanisms which may embrittle the highly stressed notch surface regions and reduce NLCF life. In conjunction with the environmentally driven notch surface degradation processes, the visco-plastic driven mechanisms which can significantly change the notch root stresses were also considered. Dwell notch low cycle fatigue testing was performed in air and vacuum on a ME3 P/M disk alloy specimens heat treated using either a fast or a slow cooling rate from the solutioning treatment. It was shown that dwells at the minimum stress typically produced a greater life debit than the dwells applied at the maximum stress, especially for the slow cooled heat treatment. Two different environmentally driven failure mechanisms were identified as the root cause of early crack initiation in the min dwell tests. Both of these failure mechanisms produced mostly a transgranular crack initiation failure mode and yet still resulted in low NLCF fatigue lives. The lack of stress relaxation during the min dwell tests produced higher notch root stresses which caused early crack initiation and premature failure when combined with the environmentally driven surface degradation mechanisms. The importance of environmental degradation mechanisms was further highlighted by vacuum dwell NLCF tests which resulted in considerably longer NLCF lives, especially for the min dwell tests.
Stress effects on electron relaxation time anisotropies in n-type Si, using high temperature piezoresistivity model for population transfer rates
In additive manufacturing, modification of the viscosity of softened or molten metal plays a significant role in the development of mechanical properties distribution. Similar to soft polymers, molten or softened metal usually exhibits vastly different viscoelastic properties. During scratching tests, viscoelastic polymers undergo spatiotemporal stress development and relaxation, causing stress ripples to form on their surfaces. Here, it is observed that friction stir-based solid-state manufacturing can yield similar stress ripples on softened aluminum alloys due to the linear motion of the deposition tool. Softened aluminum alloys exhibit viscoelastic and viscoplastic responses similar to polymeric material during the solid-state deposition process. In the final product, residual stress ripples appear on the surface of the metal alloy due to periodic residual stress relaxation, leading to oscillatory behavior from the bulk mechanical properties of the material. The orientation of the in-built stress pattern formed in the bulk of the additively manufactured metal alloy underneath the visually evident onion ring-like surface pattern formation is diametrically in the opposite direction. The experimentally observed results are consistent with analytical calculation and numerical simulations in terms of behaviors.
In a previous publication from this laboratory, the Rouse-Bueche-Zimm molecular theory of viscoelasticity has been extended by using a transient network model to apply to binary blends of monodisperse polymers with chain entanglements. The dynamics of the entanglements were modeled both by the enhanced frictional coefficients and by the additional elastic couplings. It was recognized that entanglements not only may form between chains of the same lengths (intracomponent entanglements) but also between those of different lengths (intercomponent entanglements). At a given intercomponent entanglement, the longer chain was assumed to have the frictional coefficient of the shorter chain. Similarly, for blends consisting of several monodisperse components with different molecular weights, such modifications are also required to predict their linear viscoelastic behavior. The frequency of these interactions is assumed to be proportional to the weight ratio of the respective component chains in the blend. Equations of motion are formulated for each component and solved numerically for the relaxation time spectra. Linear viscoelastic properties such as the dynamic mechanical moduli, stress relaxation moduli, and zero-shear viscosity can then be computed for these systems by linear summation of those of the components.
Epithelial cells experience long lasting loads of different magnitudes and rates. How they adapt to these loads strongly impacts tissue health. Yet, much remains unknown about the evolution of cellular stress in response to sustained strain. Here, by subjecting cell pairs to sustained strain, we report a bimodal stress response, where in addition to the typically observed stress relaxation, a subset of cells exhibits a dynamic tensioning process with significant elevation in stress within 100 s, resembling active pulling-back in muscle fibers. Strikingly, the fraction of cells exhibiting tensioning increases with increasing strain rate. The tensioning response is accompanied by actin remodeling, and perturbation to actin abrogates it, supporting cell contractility’s role in the response. Collectively, our data show that epithelial cells adjust their tensional states over short timescales in a strain-rate dependent manner to adapt to sustained strains, demonstrating that the active pulling-back behavior could be a common protective mechanism against environmental stress.
A composite model is proposed to describe the time-dependent response of the Earth's lower crust. The motivation for such it model is twofold: First, new observations of widespread postseismic deformation indicate that the deep continental crust responds viscoelastically, having both long-and short-term decay times. Second, by any number of observationally based rationales, the lower crust is compositionally and structurally heterogeneous over many length scales. For heterogeneities that have much smaller characteristic lengths than the minimum deformation wavelength of interest, the aggregate rheology can be described by composite media theory. For wavelengths of the order of the thickness of the lower crust (approx. = 25-40 km) and larger, composite theory may be applied to heterogeneities that are smaller than about several hundred meters, or equivalent to the vertical extent of a thick lower crustal mylonitic shear zone. The composite media theory developed here is constructed using both Eshelhy-Mori-Tanaka theory for aligned generalized spheroidal inclusions and a generalized self-consistent method. The inclusions and matrix are considered to be Maxwellian viscoelastic: a rheology that is consistent with past homogeneous models of postseismic stress relaxation. The composite theory presented here introduces a transient response to a suddenly imposed stress field which does not appear in homogeneous Maxwell models. Analytic expressions for the amplitude and duration of the transient and for the effective long-and short-term viscosities of the composite are given which describe the sensitivity to inclusion concentration (phi), to shape, and to ratio of inclusion-to-matrix viscosity (R).
Covalent adaptable networks (CANs) offer a compelling strategy to unite the mechanical robustness of thermosets with the reprocessability of thermoplastics, yet achieving simultaneous durability, processability, and true recyclability remains challenging. We introduce diketoenamine (DKE) vitrimers derived from β-triketone methacrylate monomers and demonstrate how rational monomer design dictates network processability, viscoelasticity, and recyclability. By systematically varying the spacer length between the β-triketone (TK) moiety and the polymer backbone, we identify a key structure–property relationship that dictates vitrimer behavior. Networks bearing TK pendants minimally displaced from the backbone suppress creep but exhibit limited stress relaxation, whereas extended spacers yield lower glass transition temperatures, higher effective crosslink densities, and efficient stress dissipation, enabling optical transparency and reprocessability. Extending this platform to ultra-high molecular-weight prepolymers introduces physical entanglements as secondary crosslinks, further enhancing dimensional stability without compromising processability. Both mechanical and chemical recycling validate the closed-loop circularity of these materials. Furthermore, these results establish TK methacrylates as a versatile platform for designing high-performance vitrimers that integrate durability, reprocessability, and true closed-loop recyclability.