Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRENGTH CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Mergers, cooling flows, and evaporation

Mergers (the capture of cold gas, especially) can have a profound influence on the hot coronal gas of early-type galaxies and clusters, potentially inducing symptoms hitherto attributed to a cooling flow, if thermal conduction is operative in the coronal plasma. Heat can be conducted from the hot phase into the cold phase, simultaneously ionizing the cold gas to make optical filaments, while locally cooling the coronal gas to mimic a cooling-flow. If there is heat conduction, though, there is no standard cooling-flow since radiative losses are balanced by conduction and not mass deposition. Amongst the strongest observational support for the existence of cooling-flows is the presence of intermediate temperature gas with x-ray emission-line strengths in agreement with cooling-flow models. Here, x-ray line strengths are calculated for this alternative model, in which mergers are responsible for the observed optical and x-ray properties. Since gas around 10(exp 4) K is thermally stable, the cold cloud need not necessarily evaporate and hydrostatic solutions exist. Good agreement with the x-ray data is obtained. The relative strengths of intermediate temperature x-ray emission lines are in significantly better agreement with a simple conduction model than with published cooling-flow models. The good agreement of the conduction model with optical, infrared and x-ray data indicates that significantly more theoretical effort into this type of solution would be profitable.

Sparks, W. B.↗
NASA NTRS1985

Improved excitation rate coefficients for the n = 2 and n = 3 levels of Ca XIX and Fe XXV including fine structure

Reently calculated collision strengths, including relativistic and resonance effects, are employed to compute Maxwellian averaged collision strengths for 78 transitions involving states of principal quantum numbers 2-1 and 3-1 in Ca XIX and Fe XXV. These rate parameters are tabulated at temperatures of interest in astrophysical and labortory plasmas with radiation in the hard X-ray wavelength range. For some transitions, significant differences are found with the earlier calculations of Pradhan, Norcross, and Hummer (1981).

Pradhan, A. K.↗
NASA NTRS1990

Collision strengths for dipole-allowed transitions in S II

Calculations of collision strengths for electron-impact excitations of S II from the ground state 3p3 4S0 to excited states 3p4 4P, 3d 4F, 3d 4D, 4s 4P, and 3d 4P were carried out using the R-matrix code described by Berrington et al. (1978) and the NIEM code described by Henry et al. (1981). Results are presented for the thermally averaged collision strengths for the five-state and six-state calculations. Convergence behaviors were examined by comparison with the six-state calculations and the previously obtained two-state calculations. Uncertainties for these transitions were estimated to be within 20 percent, except for the 4S0 - 3p4 4P transition in which a 40 percent uncertainty was estimated.

Ho, Y. K.↗
NASA NTRS1985

Oscillator strengths and collision strengths for neutral sulfur

Configuration-interaction target wave functions are used in the present calculation of collision strengths, for electron impact excitation of neutral sulfur from the group 3p4 3P state to excited states 3p3 4s 3S0, 3p3(4S0)3d 3D0, and 3p3 4s 3P0, in a close coupling approximation for the energy range up to 1,000,000 K. Configuration-interaction target wave functions are used in the calculation of collision strengths, and oscillator strengths for various triplet transitions are reported together with transitions between 3p4 1D and 3p4 1S and other singlet-excited states.

Ho, Y. K.↗
DOE OSTI2025

Chemical trends favoring interstitial cluster formation in bcc high-entropy alloys from first-principles calculations

Achieving high strength and ductility is a common goal in structural alloy design. Body-centered cubic high-entropy alloys (HEAs) commonly highlight the conflict between these properties, with stronger alloys being brittle and vice versa. Recent reports suggest interstitial solutes can be used to overcome this trade-off, in some cases providing both strength and ductility enhancements. This effect has been correlated with interstitial cluster formation, although the conditions favoring their formation remain incompletely understood. Using first-principles calculations of solution energies and diffusivities, we provide insights into thermodynamic and kinetic factors favoring interstitial solute clusters. Among C, N and O solutes, O interstitials display most desirable diffusion kinetics. Further, the results highlight the importance of local composition fluctuations in the HEAs to enable the formation of clusters of appreciable size. The results are explained in terms of bonding and distortion trends across solutes and HEA compositions to provide guidelines for alloy design.

Borges, Pedro P P O↗
DOE OSTI2020

Microstructure–Property Correlation in a Laser Powder Bed Fusion Processed High-Strength AF-9628 Steel

Laser powder bed fusion additive manufacturing (LPBF-AM) of a low-alloy, high-performance AF-9628 steel results in exceptionally high strength and good ductility. The reasons for such mechanical properties are investigated through detailed microscopy performed at several length scales. Thus, the characterization of melt pool, porosity, grain morphology, phases, and dislocations is performed in the as-printed material. The as-printed material consists of only 0.004 vol% of uniformly distributed porosity, single-phase martensitic laths with an average lath size of ≈2.5 μm, the absence of carbides indicating interstitial trapping of C atom, and high dislocation density in the martensitic laths. Experimental data through microscopy are then fed in analytical models for calculating strengthening contributions from various strengthening mechanisms. Calculated yield strength agrees well with experimentally determined value, and therefore, activation of various strengthening mechanisms is established in as-printed AF-9628.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Harmonics of 60 Hz in power systems caused by geomagnetic disturbances

Simultaneous VLF/ULF observations carried out near Winnipeg, Manitoba show that geomagnetic disturbances control the behavior of harmonics of 60 Hz man-made electric power. The harmonics of 60 Hz detected by the VLF receiver are at multiples of 180 Hz, indicating that they originated from a 3 phase ac power system. Under geomagnetically quiet conditions, only odd harmonics of 70 Hz were detected. In disturbed conditions, both odd and even harmonics were excited. The strength of each harmonic changed concurrently with geomagnetic pulsation (ULF) activity. These findings seem to indicate that a portion of telluric currents shunted into the power line system through the neutrals of the Y-connected transformers give rise to a dc bias to the transformer core materials and that it distorts their hysteresis loops, activating harmonics of 60 Hz power. A mathematical proof is given that a hysteresis loop having a point of symmetry generates odd harmonics only, whereas loops lacking in point-symmetry generally give rise to both odd and even harmonics. A general formula was obtained to calculate the strength of each harmonic based on the shape of the hysteresis loop.

Hayashi, K.↗
DOE OSTI2024

The TDHF code Sky3D version 1.2

The Sky3D code has been widely used to describe nuclear ground states, collective vibrational excitations, and heavy-ion collisions. The approach is based on Skyrme forces or related energy density functionals. The static and dynamic equations are solved on a three-dimensional grid, and pairing is been implemented in the BCS approximation. This updated version of the code aims to facilitate the calculation of nuclear strength functions in the regime of linear response theory, while retaining all existing functionality and use cases. The strength functions are benchmarked against available RPA codes, and the user has the freedom of choice when selecting the nature of external excitation (from monopole to hexadecapole and more). Some utility programs are also provided that calculate the strength function from the time-dependent output of the dynamic calculations of the Sky3D code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2011

Temperature Effects on Adhesive Bond Strengths and Modulus for Commonly Used Spacecraft Structural Adhesives

A study was performed to observe how changes in temperature and substrate material affected the strength and modulus of an adhesive bondline. Seven different adhesives commonly used in aerospace bonded structures were tested. Aluminum, titanium and Invar adherends were cleaned and primed, then bonded using the manufacturer's recommendations. Following surface preparation, the coupons were bonded with the adhesives. The single lap shear coupons were then pull tested per ASTM D 1002 Standard Test Method for Apparent Shear Strength of Single- Lap-Joint over a temperature range from -150 deg C up to +150 deg C. The ultimate strength was calculated and the resulting data were converted into B-basis design allowables. Average and Bbasis results were compared. Results obtained using aluminum adherends are reported. The effects of using different adherend materials and temperature were also studied and will be reported in a subsequent paper. Dynamic Mechanical Analysis (DMA) was used to study variations in adhesive modulus with temperature. This work resulted in a highly useful database for comparing adhesive performance over a wide range of temperatures, and has facilitated selection of the appropriate adhesive for spacecraft structure applications.

structural adhesives testing↗
DOE OSTI2024

Core-excited states in 105 Cd

105 Cd was produced in the 96 Mo+ 12 C fusion/evaporation reaction, performed at NIPNE, Bucharest-Magurele, Romania. Various excited states of positive- and negative-parities were populated. Picosecond half-lives were measured by using the Differential Decay Curve Method (DDCM) method, allowing to control the side feeding of the states of interest. Further, new data were obtained for the half-lives of the 11/2 + , 15/2 - and 19/2 -105 Cd states. Reduced electric quadrupole transition strengths were calculated and compared to the neighboring odd-A and even-A cadmium nuclei. The particle-core weak coupling approach was used to interpret excited states of 105 Cd in the light of the new data.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Experimental study of the Si 30 ( He 3 , d ) P 31 reaction and thermonuclear reaction rate of Si 30 ( p , γ ) P 31

Background: Abundance anomalies in some globular clusters, such as the enhancement of potassium and the depletion of magnesium, can be explained in terms of an earlier generation of stars polluting the presently observed ones. It was shown that the potential range of temperatures and densities of the polluting sites depends on the strength of a few critical reaction rates. The 30 Si(p,γ) 31 P reaction has been identified as one of these important reactions. Purpose: The key ingredient for evaluating the thermonuclear 30 Si(p,γ) 31 P reaction rate is the strength of the resonances which, at low energy, are proportional to their proton width. Therefore, the goal of this work is to determine the proton widths of unbound 31 P states. Method: States in 31 P were studied at the Maier-Leibnitz-Laboratorium using the one-proton 30 Si( 3 He,d) 31 P transfer reaction. Deuterons were detected with the high resolution one quadrupole three dipoles (Q3D) magnetic spectrometer. Angular distribution and spectroscopic factors were extracted for 27 states, and proton widths and resonance strengths were calculated for the unbound states. Results: Several 31 P unbound states have been observed for the first time in a one-proton transfer reaction. Above 20 MK, the 30 Si(p,γ) 31 P reaction rate is now entirely estimated from the observed properties of 31 P states. The reaction rate uncertainty from all resonances other than the E$^{c.m.}_{r}$ = 149 keV resonance has been reduced down to less than a factor of 2 above that temperature. The unknown spin and parity of the E$^{c.m.}_{r}$ = 149 keV resonance dominates the uncertainty in the rate in the relevant temperature range. Conclusion: Here, the remaining source of uncertainty on the 30 Si(p,γ) 31 P reaction rate comes from the unknown spin and parity of the E$^{c.m.}_{r}$ = 149 keV resonance which can change the reaction rate by a factor of 10 in the temperature range of interest.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

The Generalized Green’s function Cluster Expansion: A Python package for simulating polarons

We present an efficient implementation of the Generalized Green’s function Cluster Expansion (GGCE), which is a new method for computing the ground-state properties and dynamics of polarons (single electrons coupled to lattice vibrations) in model electron-phonon systems. The GGCE works at arbitrary temperature and is well suited for a variety of electron-phonon couplings, including, but not limited to, site and bond Holstein and Peierls (Su-SchriefferHeeger) couplings, and couplings to multiple phonon modes with different energy scales and coupling strengths. Quick calculations can be performed efficiently on a laptop using solvers from NumPy and SciPy, or in parallel at scale using the PETSc sparse linear solver engine.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Radiative lifetimes and absolute oscillator strengths for the SiO A/super 1/Pi to X/super 1/Sigma+ transition.

Measurement of a radiative lifetime of 9.6 (plus or minus 1.0) nsec for the SiO A(super 1)Pi state is reported. RKR Franck-Condon factors have been computed and, with these, absolute oscillator strengths are calculated. A band system at 3022 A has been found that may be due to SiO+, but the band is not resolved at our experimental resolution, and identification remains uncertain. The upper state of the carrier of this spectrum has a radiative lifetime of 8.3 (plus or minus 0.8) nsec.

Smith, W. H.↗
NASA NTRS1973

The effect of broken stringers on the stress intensity factor for a uniformly stiffened sheet containing a crack

A linear elastic stress analysis was made of a centrally cracked sheet stiffened by riveted, uniformly spaced and sized stringers. The stress intensity factor for the sheet and the load concentration factor for the most highly loaded stringer were determined for various numbers of broken stringers. A broken stringer causes the stress intensity factor to be very high when the crack tip is near the broken stringer, but causes little effect when the crack tip extends beyond several intact stringers. A broken stringer also causes an increase in the load concentration factor of the adjacent stringers. The calculated residual strengths and fatigue-crack-growth lives of a stiffened aluminum sheet with a broken stringer were only slightly less than a sheet with all intact stringers, and were still much higher than those of an unstiffened sheet.

Poe, C. C., Jr.↗
NASA NTRS1974

The failure of notched specimens of boron-fiber reinforced 6061 aluminum alloy

The effect of notches on the strength of boron fiber reinforced 6061 aluminum alloy was determined at room temperature, 300 F, and 600 F. Both unidirectional and cross-plied specimens were tested. The strengths of individual fibers were measured, and upper and lower bounds of composite strength were calculated using bundle theory. Fracture tests were performed on specimens containing center slots of various lengths, and the values of the critical stress intensity factor for initial crack propagation or final failure were calculated. For unidirectional specimens, these parameters depended on thickness; for cross-plied specimens, fairly constant values were obtained at room temperature. The cross-plied material invariably failed at a lower stress as the environmental temperature was raised.

Wright, M. A.↗
NASA NTRS1978

The O I /6300 A/ airglow

The production and destruction of O(D-1) atoms in the thermosphere are studied on the basis of observations conducted by the Atmosphere Explorer-C spacecraft. In particular, measurements of the O I transition at 6300 A provide a means of calculating the strength of the O2(+) dissociative recombination source of O(D-1), which amounts to 1.33. A value of 3 times 10 to the minus 11th power cu cm/sec is established for the quenching rate of O(D-1) by molecular nitrogen, while the photodissociation rate for O2 is set at three millionths per sec. These determinations are in agreement with the conventional theory of the day 6300-A airglow.

Hays, P. B.↗