Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Stand-alone flat-plate photovoltaic power systems: System sizing and life-cycle costing methodology for Federal agencies

A simple methodology to estimate photovoltaic system size and life-cycle costs in stand-alone applications is presented. It is designed to assist engineers at Government agencies in determining the feasibility of using small stand-alone photovoltaic systems to supply ac or dc power to the load. Photovoltaic system design considerations are presented as well as the equations for sizing the flat-plate array and the battery storage to meet the required load. Cost effectiveness of a candidate photovoltaic system is based on comparison with the life-cycle cost of alternative systems. Examples of alternative systems addressed are batteries, diesel generators, the utility grid, and other renewable energy systems.

Borden, C. S.↗
NASA NTRS1984

Digital data-acquisition system for measuring the free decay of acoustical standing waves in a resonant tube

A low-cost digital system based on an 8-bit Apple II microcomputer has been designed to provide on-line control, data acquisition, and evaluation of sound absorption measurements in gases. The measurements are conducted in a resonant tube, in which an acoustical standing wave is excited, the excitation removed, and the sound absorption evaluated from the free decay envelope. The free decay is initiated from the computer keyboard after the standing wave is established, and the microphone response signal is the source of the analog signal for the A/D converter. The acquisition software is written in ASSEMBLY language and the evaluation software in BASIC. This paper describes the acoustical measurement, hardware, software, and system performance and presents measurements of sound absorption in air as an example.

Meredith, R. W.↗
NASA NTRS1984

Free-standing thin film Ge single crystals grown by plasma-enhanced chemical vapor deposition

The films, which are approximately 10 microns in thickness, are grown epitaxially on polished (100) NaCl substrates at 450 C by plasma enhanced chemical vapor deposition. Upon cooling, the films are separated from the substrate by differential shear stress, leaving free-standing films of Ge which can be handled. Growths are attained by nucleating at minimum plasma power for very brief intervals and then raising the power to 65 W to increase the growth rate to approximately 10 microns/h. It is found that substrate exposure to the plasma at too high a power for too long a time sputters and erodes the surface, thereby substantially degrading the nucleation process and the ultimate growths. It is noted that the free-standing films are visually specular and exhibit a high degree of crystalline order when examined by X-ray diffraction. Auger electron spectroscopy and energy dispersive analysis of X-rays reveal no detectable bulk contamination.

Outlaw, R. A.↗
NASA NTRS1984

Temporal evolution of the solar wind and the formation of a standing shock

The temporal evolution of the solar wind from one steady state to another is explored when momentum deposition produces multiple critical points in the flow. It is shown that the wind always evolves in time to a new steady state compatible with the solution of the steady state equation of motion. However, for the same initial state and identical asymptotic momentum deposition rate, the temporal evolution pattern of the wind depends on the detailed time history of momentum addition and is therefore not unique. This feature plays an important role in the particular case when multiple (three in this study) steady states exist for identical boundary conditions; each one of these solutions is thus shown to be physically accessible. The details of the temporal evolution pattern of the wind reveal the formation of a shock discontinuity whenever the flow becomes supersonic at a critical point upstream from the initial critical point. If the flow remains supersonic at that inner critical point, the shock can become a standing one, depending on the strength and the temporal history of momentum addition. The results of this study indicate that the time scale required for the solar wind to evolve between steady states is of the order of 30-60 hours. Furthermore, the results also reveal the interesting and novel phenomenon that a standing shock is likely to develop in the inner solar wind flow within this time frame, in particular, in coronal hole regions with rapidly diverging geometries.

Habbal, S. R.↗
NASA NTRS1985

Acoustic radiation potential on a sphere in plane, cylindrical, and spherical standing wave fields

The method of Gor'kov is applied for deriving the acoustic radiation potential on a sphere in an arbitrary sound field. Generalized potential and force expressions are derived for arbitrary standing wave modes in rectangular, cylindrical, and spherical geometries for the case where the sphere radius is much smaller than the wavelength. Criteria for determining radiation-potential minima are derived and examples of characteristic spatial radiation-potential profiles are presented. Single modes that can sustain stable positioning are discussed for each geometry. The localizing force strengths for representative standing wave modes in the three geometries are also compared. The positioning of samples due to acoustic forces only are considered. However, the method developed is general and is extended to include gravity or other external forces.

Barmatz, M.↗
NASA NTRS1985

An analysis of cross-coupling of a multicomponent jet engine test stand using finite element modeling techniques

A two axis thrust measuring system was analyzed by using a finite a element computer program to determine the sensitivities of the thrust vectoring nozzle system to misalignment of the load cells and applied loads, and the stiffness of the structural members. Three models were evaluated: (1) the basic measuring element and its internal calibration load cells; (2) the basic measuring element and its external load calibration equipment; and (3) the basic measuring element, external calibration load frame and the altitude facility support structure. Alignment of calibration loads was the greatest source of error for multiaxis thrust measuring systems. Uniform increases or decreases in stiffness of the members, which might be caused by the selection of the materials, have little effect on the accuracy of the measurements. It is found that the POLO-FINITE program is a viable tool for designing and analyzing multiaxis thrust measurement systems. The response of the test stand to step inputs that might be encountered with thrust vectoring tests was determined. The dynamic analysis show a potential problem for measuring the dynamic response characteristics of thrust vectoring systems because of the inherently light damping of the test stand.

Schweikhard, W. G.↗
NASA NTRS1986

Evaluation of the airborne imaging spectrometer for remote sensing of forest stand conditions

Five pairs of plots were established in forest stands with one of each pair trenched and covered to prevent precipitation from reaching the tree roots. High winds and falling limbs destroyed the covers on three of the plots. The two remaining plots were in a red pine plantation and in a natural stand of sugar maple. Trees in both plots developed levels of moisture stress more than nine bars higher than control trees on the dates of overflights with the Airborne Imaging Spectrometer (AIS) and the Collins' Airborne Spectroradiometer (CAS). Hemispherical reflectance from stressed and control trees was measured with a Beckman DK2A spectrophotometer. On the day of the AIS overflight, stressed maple foliage was less reflective than the control from 1000 to 1300 nm, but more reflective at wavelengths longer than 1300 nm. Pine foliage was less reflective than the control from 1000 to 1600 nm, but the difference was small at wavelengths longer than 1350 nm. AIS data collected showed brightness values for both maple and pine to be lower than for the controls from 1000 to 1300 nm. CAS data were used to determine the gain in species identification accuracy obtainable with high spectral resolution data.

Olson, Charles E., Jr.↗
NASA NTRS1986

Electric and magnetic observations of the structure of standing waves in the magnetosphere

Electric and magnetic field instruments on the DE 1 spacecraft provided observations of toroidal standing wave oscillations of magnetic shells in 1981 and 1982. The amplitude and nodal structure of these waves, as a function of increasing magnetic latitude, was studied and compared with model calculations of these waves. Eight pulsation events were selected for study. The pulsations in these events ranged in period from 20 to 300 s. They were observed at L values between 2.8 and 9.7 and at magnetic latitudes from the equator to 48 deg. The duration of these pulsation events was 20 to 30 min, and they usually consisted of a 5- to 10-min growth in amplitude, a 5- to 10-min interval of fluctuating amplitude, and a 5- to 20-min interval of decreasing amplitude. The relative E and B amplitudes and the phase relations between the E and B waves could be qualitatively explained by the nodal structure of the waves predicted by model calculations. Detailed quantitative comparisons of E and B amplitudes were in agreement with more recent model calculations. In a few cases, electron densities were also available as derived from plasma frequency observations; in these cases the standing wave periods calculated were reasonably close to, but somewhat less than, the observed periods.

Cahill, L. J., Jr.↗
NASA NTRS1986

Structure and energetics of standing eddies in the winter Northern Hemisphere simulated by the NCAR Community Climate Model and the GLA Climate Model

The structure and maintenance of standing eddies in the NCAR Community Climate Model and the Goddard Laboratory for Atmospheres Climate Model are examined. The energy equations and data used in the study, and the differences between the two GCMs are discussed. The three-dimensional structure (height, temperature, and vertical velocity) and potential and kinetic energies and thermal and dynamic interactions of the standing eddies are described.

Lee, Yen-Huei↗
NASA NTRS1987

L-band radar backscatter modeling of forest stands

An L-band HH radar backscatter model of a coniferous forest stand is described and compared with SIR-B L-band image data of the Mount Shasta region of northern California. Being based upon an identification and implementation of the expected major components of forest backscattering, the model is simple in form and thus fast computationally, making possible extensive simulations of forest stands. A particularly important component in the model relates to representing the specular reflections expected from tree trunks to the ground and then back to the sensor. These are strong returns and are seen to be necessary to explain both the forest measurements made by the authors and the observations of others. Although the experimental data is limited in quantity and quality, agreement between available experimental and simulated values of forest backscatter is better than the residual uncertainty and relative calibration error of the experimental data, provided the model and experiment are matched initially at one set of parameter values.

Richards, John A.↗
NASA NTRS1987

Measuring near infrared spectral reflectance changes from water stressed conifer stands with AIS-2

Airborne Imaging Spectrometer-2 (AIS-2) data was acquired over two paired conifer stands for the purpose of detecting differences in spectral reflectance between stressed and natural canopies. Water stress was induced in a stand of Norway spruce and white pine by severing the sapwood near the ground. Water stress during the AIS flights was evaluated through shoot water potential and relative water content measurements. Preliminary analysis with raw AIS-2 data using SPAM indicates that there were small, inconsistent differences in absolute spectral reflectance in the near infrared 0.97 to 1.3 micron between the stressed and natural canopies.

Riggs, George↗
NASA NTRS1988

AMPTE/CCE observations of substorm-associated standing Alfven waves in the midnight sector

Magnetic-field and medium-energy particle data from the AMPTE/CCE spacecraft are used to study substorm-associated ULF pulsations in the midnight sector at a radial distance of 8 to 9 earth radii. The particle data are used to identify ion injections and to detect the electric field of ULF waves. A case study of the events on May 23, 1985 shows that the waves have the properties of a fundamental-mode standing Alfven wave. It is suggested that these observations are evidence of substorm-associated standing Alfven waves in the nightside magnetosphere.

Takahashi, K.↗
NASA NTRS1988

Parametric analysis of synthetic aperture radar data for the study of forest stand characteristics

A parametric analysis of a Gulf Coast forest stand was performed using multipolarization, multipath airborne SAR data, and forest plot properties. Allometric equations were used to compute the biomass and basal area for the test plots. A multiple regression analysis with stepwise selection of independent variables was performed. It is found that forest stand characteristics such as biomass, basal area, and average tree height are correlated with SAR data.

Wu, Shih-Tseng↗
NASA NTRS1990

Assessment of tropical forest stand characteristics with multipolarization SAR data acquired over a mountainous region in Costa Rica

A digital terrain elevation data set was coregistered with radar data for assessing tropical forest stand characteristics. Both raw and topographically corrected L-band polarimetric radar data acquired over the tropical forests of Costa Rica were analyzed and correlated with field-collected tree parameter data to study the stand characteristics. The results of analyses using 18 out of 81 plots for sites A and B indicated that per-plot bole volume and tree volume are related to SAR data, particularly at site A. The topographically corrected SAR data appear to produce the same findings as those of uncorrected data.

Wu, Shih-Tseng↗
NASA NTRS1991

Gender-based differences in the cardiovascular response to standing

The cardiovascular responses of men and women to the stand test were compared by measuring respective values for heart rate, blood pressure, stroke volume, cardiac output, and total peripheral resistance during a 5-min supine and a 5-min standing test in ten subjects of each gender. It was found that, while the male and female subjects had similar heart rate values, all other responses exhibited greater changes in men than in women. While differences in the height of the subjects did not account for differences in cardiovascular responses, no mechanism responsible for these differences could be identified.

Gotshall, Robert W.↗
NASA NTRS1992

Thrust stand evaluation of engine performance improvement algorithms in an F-15 airplane

An investigation is underway to determine the benefits of a new propulsion system optimization algorithm in an F-15 airplane. The performance seeking control (PSC) algorithm optimizes the quasi-steady-state performance of an F100 derivative turbofan engine for several modes of operation. The PSC algorithm uses an onboard software engine model that calculates thrust, stall margin, and other unmeasured variables for use in the optimization. As part of the PSC test program, the F-15 aircraft was operated on a horizontal thrust stand. Thrust was measured with highly accurate load cells. The measured thrust was compared to onboard model estimates and to results from posttest performance programs. Thrust changes using the various PSC modes were recorded. Those results were compared to benefits using the less complex highly integrated digital electronic control (HIDEC) algorithm. The PSC maximum thrust mode increased intermediate power thrust by 10 percent. The PSC engine model did very well at estimating measured thrust and closely followed the transients during optimization. Quantitative results from the evaluation of the algorithms and performance calculation models are included with emphasis on measured thrust results. The report presents a description of the PSC system and a discussion of factors affecting the accuracy of the thrust stand load measurements.

Conners, Timothy R.↗
NASA NTRS1992

On the standing wave mode of giant pulsations

In order to determine the standing wave mode of giant pulsations, a systematic survey of magnetic field data from the AMPTE CCE spacecraft and from ground stations located near the geomagnetic foot point of CCE was made. One giant pulsation was associated with a compressional wave, while no giant pulsation was observed in association with transverse wave events. The CCE magnetic field record for the giant pulsation exhibited a remarkable similarity to a giant pulsation observed from the ATS 6 geostationary satellite near the magnetic equator. It is concluded that the compressional nature of the giant pulsation is due to an odd-mode standing wave structure, which places a strong constraint on the generation mechanism of giant pulsations.

Takahashi, K.↗
NASA NTRS1991

Comparison of straight and 15 degree vectored nozzles using a six component thrust stand

This project compared the forces and moments produced by straight and 15 degree vectored nozzles. Using the six component thrust stand in the engines laboratory at California Polytechnic State University, several trials were performed. This data was then reduced using first a computer program and then later an electronic spreadsheet. This reduced data was graphed and compared. As a result of these comparisons some unexpected forces were discovered. Several more tests were run including a zero thrust test and a statistical comparison were done to discover the source of these discrepancies. As a direct result several nozzle changes were made and significant revisions to the thrust stand are being made.

Carpenter, Thomas W.↗