Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Note on use of slope diffraction coefficients for aperture antennas on finite ground planes

The use of slope diffraction coefficients along with regular diffraction coefficients for calculating the radiation patterns of aperture antennas in a finite ground plane is investigated. Explicit expressions for regular diffraction coefficients and slope diffraction coefficients are presented. The expressions for the incident magnetic field in terms of the magnetic current in the aperture are given. The slope of the incident magnetic field is calculated and closed form expressions are presented.

Cockrell, C. R.↗
NASA NTRS2001

Diurnal and Seasonal Cold Lands Signatures in SSM/I-scale Microwave Radiometry of the North Slope of Alaska

In this paper, we explore scaling and data assimilation-related issues associated with utilizing passive microwave satellite observations of Cold Lands-in this case, the climatologically and ecologically sensitive arctic tundra. Our approach expands on our earlier work using a one-year dataset from the Radiobrightness Energy Balance Experiment-3 (REBEX-3). REBEX-3 featured a tower-based SSM/I (Special Sensor Microwave/Imager) simulator deployed on the North Slope of Alaska in 1994-95. Two findings are significant here. First, a comparison of tower and satellite signatures at 19 and 37 GHz strongly suggested that the North Slope is radiometrically homogeneous for spatial scales up to SSM/I footprints (approximately 25 km), an unusual and valuable characteristic for monitoring and retrieving land surface conditions. And second, at the plot scale, signatures of snow/no-snow and freeze/thaw transitions were identifiable for tussock tundra land cover, so that even snow-free frozen tundra could be unambiguously distinguished from tundra covered with dry snow, another unusual and valuable characteristic. We present results from analyzing satellite brightness signatures of selected North Slope pixels corresponding to instrumented sites along a transect from the Brooks Range to the Arctic Ocean. A custom EASE (Equal Area Scalable Earth)-Grid processor was used to extract SSMJI data for every orbit with observations of this region during the 1994-95 year. The resulting high temporal-resolution (4-8 points/day), gridded data were then analyzed for evidence of the same diurnal and seasonal signatures seen at the plot scale (through micrometeorological and/or brightness data). Differences between satellite and tower brightness observations are quantified for various conditions at the REBEX-3 site. Such differences from the less-frequent and/or larger-scale satellite observations represent a form of input 'noise' in data assimilation applications. For the other sites, the performance of snow/no-snow and freeze/thaw discriminators vs. ground truth represents an opportunity to gauge the homogeneity of other pixels.

Kim, Edward J.↗
NASA NTRS2004

ICESat Observations of Inland Surface Water Stage, Slope, and Extent: a New Method for Hydrologic Monitoring

River discharge and changes in lake, reservoir and wetland water storage are critical terms in the global surface water balance, yet they are poorly observed globally and the prospects for adequate observations from in-situ networks are poor (Alsdorf et al., 2003). The NASA-sponsored Surface Water Working Group has established a framework for advancing satellite observations of river discharge and water storage changes which focuses on obtaining measurements of water surface height (stage), slope, and extent. Satellite laser altimetry, which can achieve centimeter-level elevation precision for single, small laser footprints, provides a method to obtain these inland water parameters and contribute to global water balance monitoring. Since its launch in January, 2003 the Ice, Cloud, and land Elevation Satellite (ICESat), a NASA Earth Observing System mission, has achieved over 540 million laser pulse observations of ice sheet, ocean surface, land topography, and inland water elevations and cloud and aerosol height distributions. By recording the laser backscatter from 80 m diameter footprints spaced 175 m along track, ICESat acquires globally-distributed elevation profiles, using a 1064 nm laser altimeter channel, and cloud and aerosol profiles, using a 532 nm atmospheric lidar channel. The ICESat mission has demonstrated the following laser altimeter capabilities relevant to observations of inland water: (1) elevation measurements with a precision of 2 to 3 cm for flat surfaces, suitable for detecting river surface slopes along long river reaches or between multiple crossings of a meandering river channel, (2) from the laser backscatter waveform, detection of water surface elevations beneath vegetation canopies, suitable for measuring water stage in flooded forests, (3) single pulse absolute elevation accuracy of about 50 cm (1 sigma) for 1 degree sloped surfaces, with calibration work in progress indicating that a final accuracy of about 12 cm (1 sigma) will be achieved for clear atmosphere conditions, suitable for detection of stage changes through time, (4) ability to precisely point the spacecraft so as to position the laser profile on the Earth the surface with a cross-track accuracy of 50 m (1 sigma), enabling small water bodies and specific locations to be targeted and re-observed through time, (5) adequate signal levels from specular water surfaces up to 5 degrees off-nadir, enabling complete global access to any location on the Earth's surface from the ICESat repeat orbit by off-nadir pointing, and (6) day and night operation with successful laser ranging to the Earth's surface through thin to moderate cloud cover, enabling more frequent measurements than can be achieved by passive optical sensors. Here we illustrate these capabilities by showing ICESat observations through time for selected river and lake locations.

Harding, David J.↗
NASA NTRS2010

Slopes To Prevent Trapping of Bubbles in Microfluidic Channels

The idea of designing a microfluidic channel to slope upward along the direction of flow of the liquid in the channel has been conceived to help prevent trapping of gas bubbles in the channel. In the original application that gave rise to this idea, the microfluidic channels are parts of micro-capillary electrophoresis (microCE) devices undergoing development for use on Mars in detecting compounds indicative of life. It is necessary to prevent trapping of gas bubbles in these devices because uninterrupted liquid pathways are essential for sustaining the electrical conduction and flows that are essential for CE. The idea is also applicable to microfluidic devices that may be developed for similar terrestrial microCE biotechnological applications or other terrestrial applications in which trapping of bubbles in microfluidic channels cannot be tolerated. A typical microCE device in the original application includes, among other things, multiple layers of borosilicate float glass wafers. Microfluidic channels are formed in the wafers, typically by use of wet chemical etching. The figure presents a simplified cross section of part of such a device in which the CE channel is formed in the lowermost wafer (denoted the channel wafer) and, according to the present innovation, slopes upward into a via hole in another wafer (denoted the manifold wafer) lying immediately above the channel wafer. Another feature of the present innovation is that the via hole in the manifold wafer is made to taper to a wider opening at the top to further reduce the tendency to trap bubbles. At the time of reporting the information for this article, an effort to identify an optimum technique for forming the slope and the taper was in progress. Of the techniques considered thus far, the one considered to be most promising is precision milling by use of femtosecond laser pulses. Other similar techniques that may work equally well are precision milling using a focused ion beam, or a small diamond-tipped drill bit.

Greer, Harold E.↗
NASA NTRS2013

Mixed Linear/Square-Root Encoded Single-Slope Ramp Provides Low-Noise ADC with High Linearity for Focal Plane Arrays

Single-slope analog-to-digital converters (ADCs) are particularly useful for onchip digitization in focal plane arrays (FPAs) because of their inherent monotonicity, relative simplicity, and efficiency for column-parallel applications, but they are comparatively slow. Squareroot encoding can allow the number of code values to be reduced without loss of signal-to-noise ratio (SNR) by keeping the quantization noise just below the signal shot noise. This encoding can be implemented directly by using a quadratic ramp. The reduction in the number of code values can substantially increase the quantization speed. However, in an FPA, the fixed pattern noise (FPN) limits the use of small quantization steps at low signal levels. If the zero-point is adjusted so that the lowest column is onscale, the other columns, including those at the center of the distribution, will be pushed up the ramp where the quantization noise is higher. Additionally, the finite frequency response of the ramp buffer amplifier and the comparator distort the shape of the ramp, so that the effective ramp value at the time the comparator trips differs from the intended value, resulting in errors. Allowing increased settling time decreases the quantization speed, while increasing the bandwidth increases the noise. The FPN problem is solved by breaking the ramp into two portions, with some fraction of the available code values allocated to a linear ramp and the remainder to a quadratic ramp. To avoid large transients, both the value and the slope of the linear and quadratic portions should be equal where they join. The span of the linear portion must cover the minimum offset, but not necessarily the maximum, since the fraction of the pixels above the upper limit will still be correctly quantized, albeit with increased quantization noise. The required linear span, maximum signal and ratio of quantization noise to shot noise at high signal, along with the continuity requirement, determines the number of code values that must be allocated to each portion. The distortion problem is solved by using a lookup table to convert captured code values back to signal levels. The values in this table will be similar to the intended ramp value, but with a correction for the finite bandwidth effects. Continuous-time comparators are used, and their bandwidth is set below the step rate, which smoothes the ramp and reduces the noise. No settling time is needed, as would be the case for clocked comparators, but the low bandwidth enhances the distortion of the non-linear portion. This is corrected by use of a return lookup table, which differs from the one used to generate the ramp. The return lookup table is obtained by calibrating against a stepped precision DC reference. This results in a residual non-linearity well below the quantization noise. This method can also compensate for differential non-linearity (DNL) in the DAC used to generate the ramp. The use of a ramp with a combination of linear and quadratic portions for a single-slope ADC is novel. The number of steps is minimized by keeping the step size just below the photon shot noise. This in turn maximizes the speed of the conversion. High resolution is maintained by keeping small quantization steps at low signals, and noise is minimized by allowing the lowest analog bandwidth, all without increasing the quantization noise. A calibrated return lookup table allows the system to maintain excellent linearity.

Wrigley, Chris J.↗
NASA NTRS2020

Design and Testing of an Ultra-Light Weight Perching System for Sloped or Vertical Rough Surfaces on Mars

In this paper, we present the design, characterization, and functional demonstration of a perching system that enables a flying vehicle to land on rough sloped or vertical surfaces. Steep slopes are of particular scientific interest since they are often associated with geologically interesting features including sites of active modification (e.g. landslides/avalanches, slope streaks), exposed bedrock and/or ice, and as-yet unmodified young features (e.g. walls of fresh craters or polar pits that are actively expanding). However the steep nature of these sites makes access with traditional field robots difficult: ground vehicles are unable to traverse the steep terrain and aerial vehicles are limited by their flight time and an ability to operate near terrain. We propose to address these limitation by enabling the UAV to reliably perch on steep terrain to perform in situ measurements and collect samples. Perching also enables a solar powered UAV to traverse large terrain features such as the Valles Marineris that could not be covered in a single flight by repeatedly perching and recharging its batteries. The proposed perching system that is being developed consists of a microspine gripper, a compliant gripper to vehicle interface, and a flying vehicle equipped with an autonomy sensor suite. The system also includes perception and control algorithms that identify perching targets and execute the required perching maneuver. To date, the majority of the effort has focused on developing and characterizing the microspine gripper. The initial prototype weighs 100 g, is capable of securely grasping a range of natural surfaces, and successful grasps support loads of over 10 N. Refinement of the gripper, integrating and testing it on a UAV, measuring aerodynamic distrubances from wall effects, and developing the required perception and control algorithms is ongoing. This paper describes the overall architecture of our proposed system, the design of the gripper, and its performance during initial testing.

Backus, Spencer↗
NASA NTRS2024

An Interesting Correlation Between the Peak Slope and Peak Value of a Sunspot Cycle

The maximum slope of the sunspot number during the rising phase of a sunspot cycle has an excellent correlation with the maximum value of the sunspot number during that cycle. This is demonstrated using a Savitzky–Golay filter to both smooth and calculate the derivative of the sunspot-number data. Version 2 of the International Sunspot Number (S) is used to represent solar activity. The maximum of the slope during the rising phase of each cycle was correlated against the peaks of solar activity. Using three different correlation fits, the average predicted amplitude for Solar Cycle 25 is 130.7 ± 0.5, among the best correlations in solar predictions. A possible explanation for this correlation is given by the similar behavior of a shape function representing the time variation of the sunspot number. This universal function also provides the timing of the solar maximum by the time from the slope maximum to the peak in the function as late 2023 or early 2024. A Hilbert transform gives similar results, which are caused by the dominance of the 11-yr sunspot-cycle period in a Fourier fit of the sunspot number.

W. Dean Pesnell↗
DOE OSTI2025

Modeling gas, hydrates, and slope stability on the U.S. Atlantic margin during Pleistocene glacial cycles

Changes in temperature and sea level can cause dissociation of methane hydrates in shallow marine sediments, leading to seafloor destabilization. Along the U.S. Atlantic margin, there exists a well-documented history of slope failure and numerous recorded occurrences of gas seeps. Several studies have linked slope failure in the region to gas seepage and hydrate dissociation driven by glacial-interglacial transitions, but this linkage has not been quantitatively demonstrated. Along the shelf edge, in an area where shallow methane gas seeps have been identified, we modeled methane gas and hydrate formation using a one-dimensional fluid flow model. Methane gas formation was modeled over the last 120,000 years to simulate a glacial-interglacial cycle. Here, we ran this model at 16,044 individual locations in the region between 29° N – 45° N and 82° W – 66° W at a resolution of 1 x 1 arcminutes, focusing specifically on water depths between 200 and 1000 m that bracket the seafloor outcrop of the base of the hydrate stability zone. Using historic temperature and pressure records from the last 120,000 years, sediment properties in the area, and factor of safety calculations, we found that hydrate dissociation alone is unlikely to cause sediment failure in the region, implying that an additional driving force would be necessary for failure to occur.

Hydrate dissociation↗
DOE OSTI2022

Orthoimagery and Shapefiles Documenting Pre- and Post-August 2019 Slope Disturbances, Teller Road Site, Seward Peninsula, Alaska, 2018-2019

This dataset was derived from UAS aerial photos and dGPS data collected at the Teller mile marker 47 site in 2018 and 2019 and used to support research quantifying the timing and rate of surface movements and analyze soil transport process in Arctic landscapes. In July 2018, a Phantom uncrewed aerial system (UAS) collected >6800 high resolution aerial photos of the lower portion of the Teller 47 watershed (see for raw photos; pending archive NGA281). During the UAS survey, 25 x 25 cm tile ground control points (GCPs) were laid out and secured with one rebar rod in the center. The four corners and rebar tops were surveyed with differential GPS, and these coordinates were used to construct and validate an orthomosaic of the site. These points were resurveyed in August 2019 and used to track annual movement. Changes in position between the two surveys are reported in (Lathrop et al. 2022; NGA254). Agisoft Metashape photogrammetry software was used to construct a georeferenced orthomosaic image (*.tif file) of a portion (0.68 km2) of the watershed with a final resolution of ~1 cm. Manual delineation of the perimeters of failures visible in the UAS imagery (*.tif files) was conducted to create shapefile polygons (two *.zip files). The failures were identified by the exposure of bare mineral soils, which were made visible by disruption of the overlying tundra vegetation. The shapefiles were then used to analyse the topographic distribution and sizes of the failures. In August 2019 an additional ~300 georeferenced UAS images of slope instability features were collected (data pending submission) and compared with the 2018 orthomosaic. Overview maps of the failure locations included as a *.pdf.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

State and Local Planning for Energy (SLOPE) Platform

This fact sheet outlines the basic overview features, purpose, and additional information for the State and Local Planning for Energy (SLOPE) Platform. SLOPE is a collaboration between nine U.S. Department of Energy (DOE) technology offices and the National Renewable Energy Laboratory (NREL), integrates and delivers jurisdictionally resolved potential and projection data on energy efficiency, renewable energy, and sustainable transportation in an easy-to-access online platform to enable data-driven state and local energy planning and decision-making.

48 EE - Weatherization and Intergovernmental Progr↗
DOE OSTI2020

Ultra‐Steep Slope Impact Ionization Transistors Based on Graphene/InAs Heterostructures

With the continued scaling of transistors, there is a growing trend for developing steep slope transistors with subthreshold swing (SS) below Boltzmann limitation ( k T/ q ). To this end, impact ionization metal oxide semiconductor (I‐MOS) transistors are attractive for a unique combination of high ON‐state current density, small hysteresis, and ultra‐steep SS slope. However, the performance of I‐MOS is generally limited by the relatively thick depletion region and large operation voltage required for the activation of impact ionization (typically >5 V). Herein, a high‐performance I‐MOS is constructed by van der Waals integrating single‐crystal InAs film with graphene. Due to the low bandgap of InAs as well as the semi‐metallic nature of graphene, the InAs/graphene I‐MOS demonstrates a low operation voltage of 1.5 V, high ON‐state current of 230 μA μm −1 , steep SS <0.6 mV dec −1 , and large ON–OFF ratio >10 6 at temperature below 200 K. Furthermore, a negative transconductance and steep current oscillation is observed in the subthreshold regime, and a device working mechanism is proposed for this novel phenomenon. This study not only pushes the performance limit of I‐MOS but also defines a general pathway to van der Waals heterostructures between conventional III–V compound semiconductors and novel 2D materials for unconventional device functions.

Liu, Yuan↗
DOE OSTI2022

Typological representation of the offshore oceanographic environment along the Alaskan North Slope

Erosion and flooding impacts to Arctic coastal environments are intensifying with nearshore oceanographic conditions acting as a key environmental driver. Robust and comprehensive assessment of the nearshore oceanographic conditions require knowledge of the following boundary conditions: incident wave energy, water level, incident wind energy, ocean temperature and salinity, bathymetry, and shoreline orientation. The number of offshore oceanographic boundary conditions can be large, requiring a significant computational investment to reproduce nearshore conditions. This present study develops location-independent typologies to reduce the number of boundary conditions needed to assess nearshore oceanographic environments in both a Historical (2007–2019) and Future (2020–2040) timespan along the Alaskan North Slope. We used WAVEWATCH III® and Delft3D Flexible Mesh model output from six oceanographic sites located along a constant ~50 m bathymetric line spanning the Chukchi to Beaufort Seas. K-means clustering was applied to the energy-weighted joint-probability distribution of significant wave height (H s ) and peak period (T p ). Distributions of wave and wind direction, wind speed, and water level associated with location-independent centroids were assigned single values to describe a reduced order, typological rendition of offshore oceanographic conditions. Reanalysis data (e.g., ASRv2, ERA5, and GOFS) grounded the historical simulations while projected conditions were obtained from downscaled GFDL-CM3 forced under RCP8.5 conditions. Location-dependence for each site is established through the occurrence joint-probability distribution in the form of unique scaling factors representing the fraction of time that the typology would occupy over a representative year. As anticipated, these typologies show increasingly energetic ocean conditions in the future. They also enable computationally efficient simulation of the nearshore oceanographic environment along the North Slope of Alaska for better characterization of coastal processes (e.g., erosion, flooding, or sediment transport).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Universal scaling laws and density slopes for dark matter haloes

Smalls scale challenges suggest some missing pieces in our current understanding of dark matter. In this work, a cascade theory for dark matter is proposed to provide extra insights, similar to the cascade phenomenon in hydrodynamic turbulence. The kinetic energy is cascaded in dark matter from small to large scales involves a constant rate $ε_u$ (≈–4.6×10 –7 m 2 / s 3 ). Confirmed by N-body simulations, the energy cascade leads to a two-thirds law for kinetic energy $v^2_r$ on scale $\textit{r}$ such that $v^2_r∝(ε_ur)^{2/3}$. Equivalently, a four-thirds law can be established for mean halo density $ρ_s$ enclosed in the scale radius $r_s$ such that $ρ_s ∝ε^{2/3}_uG^{–1}r^{–4/3}_s$, which was confirmed by galaxy rotation curves. Critical properties of dark matter might be obtained by identifying key constants on relevant scales. First, the largest halo scale $r_l$ can be determined by $–u^3_0/ε_u$, where u0 is the velocity dispersion. Second, the smallest scale rη is dependent on the nature of dark matter. For collisionless dark matter, $r_η∝(–Gℏ/ε_u)^{1/3}$ ≈ 10 –13 m , where ℏ is the Planck constant. An uncertainty principle for momentum and acceleration fluctuations is also postulated. For self-interacting dark matter, $r_η∝ε^2_uG^{–3}(σ/m)^3$, where σ/m is the cross-section of interaction. On halo scale, the energy cascade leads to an asymptotic density slope γ = –4/3 for fully virialized haloes with a vanishing radial flow, which might explain the nearly universal halo density. Based on the continuity equation, halo density is analytically shown to be closely dependent on the radial flow and mass accretion, such that simulated haloes can have different limiting slopes. A modified Einasto density profile is proposed accordingly.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

The advancing wave front on a sloping channel covered by a rod canopy following an instantaneous dam break

The drag coefficient Cd for a rigid and uniformly distributed rod canopy covering a sloping channel following the instantaneous collapse of a dam was examined using flume experiments. The measurements included space x and time t high resolution images of the water surface h(x, t) for multiple channel bed slopes So and water depths behind the dam Ho along with drag estimates provided by sequential load cells. Using these data, an analysis of the Saint-Venant equation (SVE) for the front speed was conducted using the diffusive wave approximation. An inferred Cd=0.4 from the h(x, t) data near the advancing front region, also confirmed by load cell measurements, is much reduced relative to its independently measured steady-uniform flow case. This finding suggests that drag reduction mechanisms associated with transients and flow disturbances are more likely to play a dominant role when compared to conventional sheltering or blocking effects on Cd examined in uniform flow. The increased air volume entrained into the advancing wave front region as determined from an inflow–outflow volume balance partly explains the Cd reduction from unity.

Mechanics↗
DOE OSTI2024

Slope of the upper critical field at T c in two-band superconductors with nonmagnetic disorder: s + + superconductivity in Ba 1 − x K x Fe 2 As 2

A recent theory of the disorder-dependent slope of the upper critical field at the superconducting transition temperature T c , defined as S ≡ |dH c2 /dT| T→T c , is extended to multiband superconductors aimed at iron-based superconductors, considering two constant gaps of different magnitudes and, potentially, different signs. Here, we show that the slope S decreases with increasing nonmagnetic scattering rate P in the s ± pairing state and increases in the s ++ superconductor for a reasonable range of parameters. The experiment shows that in a typical iron-based superconductor, Ba 1–x K x Fe 2 As 2 (BaK122), the nonmagnetic disorder induced by electron irradiation leads to an increasing S(P) across the superconducting “dome,” at different x. This implies that Ba 1–x K x Fe 2 As 2 is likely an s ++ superconductor with two effective gaps of different magnitudes, at least at moderate doping levels, x< 0.6. This work reopens a decade-long discussion about the nature of the superconducting order parameter in iron pnictides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Slope Efficiency and Voltage Reduction at High Current Densities in AlInGaAs Diode Lasers

Here, the slope efficiency and drive voltage of broad area AlInGaAs laser diodes near 865 nm is observed to decrease significantly under quasi-CW pulsed operation at currents well above threshold, in a manner that cannot be explained by thermal effects or carrier leakage over heterojunction barriers. Simulations show that the slope efficiency reduction is explicable by increased free carrier absorption in the waveguide region. Empirical formulas are presented to represent these effects in a closed analytic form suitable for use in simulators for diode-pumped laser systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Maximizing Yield with Improved Single-Axis Backtracking on Cross-Axis Slopes

Many tracking PV systems avoid row-to-row shading by backtracking in morning and afternoon. Because the common single-axis backtracking implementation assumes the array is in a horizontal plane, it does not fully prevent row-to-row shading in arrays installed on cross-axis slopes, e.g. an east-west slope for a tracker with north-south axis alignment. This paper presents the simulated effect of reduced self-shading on annual production with two modified backtracking strategies. Depending on the array geometry and the steepness of the cross-axis grade, using a modified backtracking strategy improved annual yield by 3-10%.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2026

Temperature Inversions below 1 km from a V-Band Scanning Radiometer at the North Slope of Alaska

A single-channel (56.7 GHz) scanning radiometer was deployed in August 2022 at the Atmospheric Radiation Measurement (ARM) North Slope of Alaska site near Utqiaġvik. The radiometer is designed to provide temperature profiles between 0 and 1 km every 5 min. Averaging kernels show that this single-channel radiometer, taking observations at 10 discrete elevation angles, yields approximately the same information as a seven-channel V-band radiometer scanning three elevation angles. The instrument is able to reproduce the occurrence of temperature inversions between the surface and 1 km and their strength showing a correlation of 0.85, bias of −0.6 K, and slope of 1.04 with respect to radiosondes. Uncertainty in the inversion base height varies from 50 m near the surface to ∼300 m above 0.4 km when compared with radiosondes. Conversely, the inversion top height is overestimated and has higher uncertainty due to the degrading effects of the averaging kernels on the vertical resolution of the retrievals. Thanks to the high temporal resolution of the retrievals, the diurnal cycle of boundary layer temperature was evaluated showing that the radiometer can capture some aspects of the boundary layer thermal structure. The present analysis provides an overview of the capabilities of this simple observing configuration for selected applications.

Atmospheric profilers↗