Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

The Mineralogy of Circumstellar Silicates Preserved in Cometary Dust

Interplanetary dust particles (IDPs) contain a record of the building blocks of the solar system including presolar grains, molecular cloud material, and materials formed in the early solar nebula. Cometary IDPs have remained relatively unaltered since their accretion because of the lack of parent body thermal and aqueous alteration. We are using coordinated transmission electron microscope (TEM) and ion microprobe studies to establish the origins of the various components within cometary IDPs. Of particular interest is the nature and abundance of presolar silicates in these particles because astronomical observations suggest that crystalline and amorphous silicates are the dominant grain types produced in young main sequence stars and evolved O-rich stars. Five circumstellar grains have been identified including three amorphous silicate grains and two polycrystalline aggregates. All of these grains are between 0.2 and 0.5 micrometers in size. The isotopic compositions of all five presolar silicate grains fall within the range of presolar oxides and silicates, having large (17)O-enrichments and normal (18)O/(16)O ratios (Group 1 grains from AGB and RG stars). The amorphous silicates are chemically heterogeneous and contain nanophase FeNi metal and FeS grains in a Mg-silicate matrix. Two of the amorphous silicate grains are aggregates with subgrains showing variable Mg/Si ratios in chemical maps. The polycrystalline grains show annealed textures (equilibrium grains boundaries, uniform Mg/Fe ratios), and consist of 50-100 nm enstatite and pyrrhotite grains with lesser forsterite. One of the polycrystalline aggregates contains a subgrain of diopside. The polycrystalline aggregates form by subsolidus annealing of amorphous precursors. The bulk compositions of the five grains span a wide range in Mg/Si ratios from 0.4 to 1.2 (avg. 0.86). The average Fe/Si (0.40) and S/Si (0.21) ratios show a much narrower range of values and are approximately 50% of their solar abundances. The latter observation may indicate a decoupling of the silicate and sulfide components in grains that condense in stellar outflows. The amorphous silicate grains described here were not extensively affected by irradiation, sputtering, or thermal processing and may represent relatively pristine circumstellar grains. They are strong candidates for the "dirty silicates" in astronomical observations of circumstellar dust shells. The polycrystalline grains were originally amorphous silicate grains that were likely annealed in the early solar nebula but the processing was not sufficient to erase their anomalous oxygen isotopic compositions.

Keller, L. P.↗

Cometary Silicates: Interstellar and Nebular Materials

Evidence for interstellar material in comets is deduced from IR spectra, insitu measurements of Halley, and chondritic porous interplanetary dust particles (CP IDPs). IR spectra of comets reveal the spectrally active minerals: amorphous carbon, amorphous silicates, and (in some comets) crystalline silicates. Evidence suggests amorphous silicates are of interstellar origin while crystalline silicates are of nebular origin. 10 microns spectra of comets and submicron amorphous silicate spherules in CP IDPs have shapes similar to lines-of-sight through the ISM. Thermal emission models of cometary IR spectra require Fe-bearing amorphous silicates. Fe-bearing amorphous silicates may be Fe-bearing crystalline silicates formed in AGB outflows that are amorphized through He+ ion bombardment in supernova shocks in the ISM. Crystalline silicates in comets, as revealed by IR spectra, and their apparent absence in the ISM, argues for their nebular origin. The high temperatures (less than l000 K) at which crystals form or are annealed occur in the inner nebula or in nebular shocks in the 5-10 AU region. Oxygen isotope studies of CP IDPs show by mass only 1 % of the silicate crystals are of AGB origin. Together this suggests crystalline silicates in comets are probably primitive grains from the early solar nebula.

Wooden, Diane H.↗

Pt, Au, Pd and Ru Partitioning Between Mineral and Silicate Melts: The Role of Metal Nanonuggets

The partition coefficients of Pt and other Pt Group Elements (PGE) between metal and silicate D(sub Metal-Silicate) and also between silicate minerals and silicate melts D(sub Metal-Silicate) are among the most challenging coefficients to obtain precisely. The PGE are highly siderophile elements (HSE) with D(sub Metal-Silicate) >10(exp 3) due to the fact that their concentrations in silicates are very low (ppb to ppt range). Therefore, the analytical difficulty is increased by the possible presence of HSE-rich-nuggets in reduced silicate melts during experiments). These tiny HSE nuggets complicate the interpretation of measured HSE concentrations. If the HSE micro-nuggets are just sample artifacts, then their contributions should be removed before calculations of the final concentration. On the other hand, if they are produced during the quench, then they should be included in the analysis. We still don't understand the mechanism of nugget formation well. Are they formed during the quench by precipitation from precursor species dissolved homogeneously in the melts, or are they precipitated in situ at high temperature due to oversaturation? As these elements are important tracers of early planetary processes such as core formation, it is important to take up this analytical and experimental challenge. In the case of the Earth for example, chondritic relative abundances of the HSE in some mantle xenoliths have led to the concept of the "late veneer" as a source of volatiles (such as water) and siderophiles in the silicate Earth. Silicate crystal/liquid fractionation is responsible for most, if not all, the HSE variation in the martian meteorite suites (SNC) and Pt is the element least affected by these fractionations. Therefore, in terms of reconstructing mantle HSE abundances for Mars, Pt becomes a very important player. In the present study, we have performed high temperature experiments under various redox conditions in order to determine the abundances of Pt, Au, Ru and Pd in minerals (olivine and diopside) and in silicate melts, but also to characterize the sizes, density and chemistry of HSE nuggets when present in the samples.

Malavergne, V.↗

29 Si solid state MAS NMR study on leaching behaviors and chemical stability of different Mg-silicate structures for CO 2 sequestration

Silicon is one of the most earth abundant elements, and thus, the fate and reactivity of silicate materials are often important for various energy and environmental technologies including carbon sequestration, where CO 2 is captured and stored as a thermodynamically stable solid carbonate phase. Thus, understanding the structures and chemistries of different silicate phases has become an important research aim. Here in this study, the changes in the silicate structures (Q 0 –Q 4 ) of heat-treated Mg-bearing mineral (serpentine) exposed to a CO 2 -water system (carbonic acid) was investigated using 29 Si MAS NMR, XRPD and ICP-OES and the identified structures were employed to explain complex leaching behaviors of silicate materials. The 29 Si MAS NMR and XRPD analysis indicated that the heat-treated serpentine is a mixture of amorphous (Q 1 : dehydroxylate I, Q 2 : enstatite, Q 4 : silica) and crystalline (Q 0 : forsterite, Q 3 : dehydroxylate II and serpentine) phase, while natural serpentine mineral has single crystalline Q 3 silicate structure. The leaching experiments showed that both Mg and Si in the amorphous silicate structures (Q 1 : dehydroxylate I, Q 2 : enstatite) are more soluble than those in crystalline phase (Q 0 : forsterite, Q 3 : dehydroxylate II and serpentine). Therefore, tuning the silicate structure towards Q 1 and Q 2 would significantly improve carbon sequestration potential of silicate minerals, whereas silicate materials with Q 3 structure would provide great chemical stabilities in acidic conditions. The solubilities of silicate structures were in the order of Q 1 (dehydroxylate I) > Q2 (enstatite) >> Q0 (forsterite) > Q3 (dehydroxylate II) > Q 3 (serpentine) and this finding can be used to better design a wide range of energy and environmental materials and reaction systems.

25 ENERGY STORAGE↗

Binding Geometries of Silicate Species on Ferrihydrite Surfaces

Silicate sorption on ferrihydrite surfaces, as monomers, oligomers, and polymers, strongly affects ferrihydrite crystallinity, thermodynamic stability, and surface reactivity. How these silicate species bind on ferrihydrite surfaces is, however, not well understood. We have determined silicate binding geometries using a combination of X-ray absorption spectroscopy (XAS), differential atomic pair distribution function (d-PDF) analysis, and density functional theory (DFT) calculations. Silicon K-edge absorption pre-edges and DFT-predicted energies indicate that silicate forms monomeric monodentate–mononuclear (MM) complexes at low silicate sorption loadings. With increasing silicate loading, the pre-edge peak shifts to higher energies, suggesting changes in the silicate binding geometry toward multidentate complexation. The d-PDF analysis determines the Si–Fe interatomic distance to be ~3.25 Å for the high-loading samples. The DFT calculations indicate that such distance corresponds to an oligomer in the bidentate–binuclear (BB) binding geometry. The transition of the silicate sorption geometry accompanied by polymerization can affect stability of ferrihydrite and its adsorption and redox reactivity and increase the degree of Si isotopic fractionation upon silicate sorption on Fe oxides. MM monomeric complexes and BB oligomeric complexes should be used for surface complexation models predicting silicate sorption on Fe oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steps toward interstellar silicate dust mineralogy

One of the most certain facts on interstellar dust is that it contains grains with silicon oxygen tetrahedra (SOT), the internal vibrations of which cause the well known silicate bands at 10 and 18 microns. The broad and almost structureless appearance of them demonstrates lack of translation symmetry in these solids that must be considered amorphous or glassy silicates. There is no direct information on the cations in these interstellar silicates and on the number of bridging oxygens per tetrahedron (NBO). Comparing experimental results gained on amorphous silicates, e.g., silicate glasses, of cosmically most abundant metals (Mg, Fe, Ca, Al) with the observations is the only way to investigate interstellar silicate dust mineralogy (cf, Dorschner and Henning, 1986). At Jena University Observatory IR spectra of submicrometer-sized grains of pyroxene glasses (SSG) were studied. Pyroxenes are common minerals in asteroids, meteorites, interplanetary, and supposedly also cometary dust particles. Pyroxenes consist of linearly connected SOT (NBO=2). In the vitreous state reached by quenching melted minerals, the SOT remain nearly undistorted (Si-O bond length unchanged); the Si-O-Si angles at the bridging oxygens of pyroxenes, however, scatter statistically. Therefore, the original cation oxygen symmetry of the crystal (octahedral and hexahedral coordination by O) is completely lost. The blended bands at 10 and 18 microns lose their diagnostic differences and become broad and structureless. This illustrates best the basic problem of interstellar silicate mineral diagnostics. Optical data of glasses of enstatite, bronzite, hypersthene, diopside, salite, and hedenbergite have been derived. Results of enstatite (E), bronzite (B), and hypersthene (H) show very good agreement with the observed silicate features in the IR spectra of evolutionarily young objects that show P-type silicate signature according to the classification by Gurtler and Henning (1986). Compositional parameters and main characteristics of experimental SSG spectra in IR for the glasses E, B, and H are shown in tabular form. Results fit excellently the relations derived by Koike and Hasegawa (1987) and suggest that the band ratio of the astronomical silicate by Draine and Lee (1984) is too low.

Dorschner, J.↗

Probing Carbon Mineralization Mechanisms in Pore and Bulk Fluids by Harnessing Architected Calcium Silicates

The ability to synthesize materials with well-controlled pore structures gives us unprecedented control over probing fluid interactions with reactive interfaces and advancing calibrated insights into coupled chemo-morphological interactions. One of the primary challenges in developing crystalline silicate materials lies in achieving ordered pore structures. Existing approaches of producing amorphous mesoporous metal silicates via sol–gel methods and heat-treatment of these materials to produce crystalline phases cause the pore structures in the amorphous phases to collapse. To overcome this challenge, carbon coating of amorphous mesoporous calcium silicate particles is carried out to retain the pore structure, while the material is heated to produce crystalline calcium silicate with calcium sulfate inclusions. The pore diameter in these materials is about 3.9 nm, with a surface area and a pore volume of 28.75 m 2 /g and 0.092 cm 2 /g, respectively. The mechanisms of carbon mineralization are investigated by reacting architected calcium silicate with 1 M Na 2 CO 3 and monitoring the evolution in the structural phases using operando wide-angle X-ray scattering (WAXS) measurements. Formation of stable calcium carbonate polymorph or calcite and metastable calcium carbonate polymorph or vaterite in pore and bulk fluids, respectively, resulting from the reaction between Na 2 CO 3 and CaSiO 3 , are noted. The mechanisms associated with carbon mineralization are delineated using ReaxFF molecular dynamics (MD) simulations. The surface dissolution reaction is initiated by 2H + ions that replace a Ca 2+ ion in the Ca–silicate matrix. Ca 2+ ions in the solution initially react with water to form calcium hydroxide and eventually form calcium (bi)carbonate. A slow and gradual increase in the formation of sodium silicate in the solution resulting from the reactions of silicic acid or the silicon dioxide reaction with sodium hydroxide is noted. When carbon mineralization occurs in environments bearing interfacial fluids, calcite is the dominant calcium carbonate polymorph, as determined using experiments with pore fluids and molecular-scale simulations. In conclusion, these studies provide fundamental insights into the mechanisms underlying the carbon mineralization of calcium silicate informed by experiments and molecular-scale simulations.

Calcium↗

Effects of pH on deposition rate of supersaturated silicic acid around geological disposal system - 15245

For the migration assessment of radionuclides around geological repository, it is important to estimate the dynamic behavior of silicic acid under a high alkalinity condition due to the cementitious materials for the construction of the repository. This study examined the pH dependencies of the deposition behavior of supersaturated silicic acid in the co-presence of solid phase. The parameters for the deposition experiments were as follow: the pH was set to 8, 9 and 10, the initial saturated concentration was set to 2-8 mM, the amount of amorphous silica (350 m{sup 2}/g) as solid phase was set to 0.1-1.0 g. The experimental results showed that the initial supersaturated concentrations strongly affected the formation of colloidal silicic acid, increasing the deposition amount of silicic acid and decreasing the soluble silicic acid with time. In other words, the polymerization and the deposition of silicic acid simultaneously arose in these experiments. Furthermore, this study evaluated the apparent deposition rates of silicic acid by assuming the first-order reaction equation considering the specific surface area. As a result, the deposition rate constants, k, were in a narrow range of 10{sup -11} to 10{sup -10} m/s under all experimental conditions in this study. This means that the deposition rate constants do not depend both on pH-value (in the range from 8 to 10) and the initial concentration of supersaturated silicic acid. That is, the estimated deposition rate constants are useful in estimation of the deposition behavior of supersaturated silicic acid, such as the clogging in fractures (flow-paths) around the repository, even if the pH-value of groundwater gradually or dramatically changes. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influences of Mg Ions and Al Ions on Deposition Behavior of Supersaturated Silicic Acid - 20261

Silicic acid can change into various species such as deposit, colloidal, and soluble form under certain conditions: for example, gradual pH changes around geological disposal repositories. In particular, silicic acid deposits narrow groundwater flow paths, thereby restricting the flow of groundwater. Such effects may contribute to a delay in radionuclide migration. Previous studies have reported that silicic acid supersaturated in sodium and calcium ions can narrow the flow paths. This study examined the effect of magnesium (Mg) and aluminum (Al) ions on the deposition of supersaturated silicic acid on the solid phase. The deposition behavior of supersaturated silicic acid on the solid phase was investigated in a batch system while changing the initial supersaturation concentration, the coexisting ion concentration, and the amount of added solid phase. In the presence of Mg ions, silicic acid precipitation increased with increasing Mg ion concentration due to the influence of the electrolyte, and crosslinking reactions. The coexistence of Al ions significantly suppressed silicic acid deposition due to the formation of a covering on the solid surface during Al ion hydrolysis under conditions of high Al concentration (1.4 mM). On the basis of these experimental results, the apparent deposition rate constant of silicic acid was estimated to be in the range from 10{sup -11} to 10{sup -10} m/s. The Damkoehler number (the dimensionless number expressed by the ratio of the characteristic time of mass transfer and the chemical reaction constant) was sufficient to cause the clogging of the host rock by deposition. This suggests that supersaturated silicic acid deposition, regardless of the presence of Mg ions (and Al ions), contributes to improving barrier performance against radionuclide migration in the host rock. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CO 2 capture properties of lithium silicates with different ratios of Li 2 O/SiO 2 : an ab initio thermodynamic and experimental approach

The lithium silicates have attracted scientific interest due to their potential use as high-temperature sorbents for CO 2 capture. The electronic properties and thermodynamic stabilities of lithium silicates with different Li 2 O/SiO 2 ratios (Li 2 O, i 8 SiO 6 , Li 4 SiO 4 , Li 6 Si 2 O 7 , Li 2 SiO 3 , Li 2 Si 2 O 5 , Li 2 Si 3 O 7 , and a-SiO 2 ) have been investigated by combining first-principles density functional theory with lattice phonon dynamics. All these lithium silicates examined are insulators with band-gaps larger than 4.5 eV. By decreasing the Li 2 O/SiO 2 ratio, the first valence bandwidth of the corresponding lithium silicate increases. Additionally, by decreasing the Li 2 O/SiO 2 ratio, the vibrational frequencies of the corresponding lithium silicates shift to higher frequencies. Based on the calculated energetic information, their CO 2 absorption capabilities were extensively analyzed through thermodynamic investigations on these absorption reactions. We found that by increasing the Li 2 O/SiO 2 ratio when going from Li 2 Si 3 O 7 to Li 8 SiO 6 , the corresponding lithium silicates have higher CO 2 capture capacity, higher turnover temperatures and heats of reaction, and require higher energy inputs for regeneration. Based on our experimentally measured isotherms of the CO 2 chemisorption by lithium silicates, we found that the CO 2 capture reactions are two-stage processes: (1) a superficial reaction to form the external shell composed of Li 2 CO 3 and a metal oxide or lithium silicate secondary phase and (2) lithium diffusion from bulk to the surface with a simultaneous diffusion of CO 2 into the shell to continue the CO 2 chemisorption process. The second stage is the rate determining step for the capture process. By changing the mixing ratio of Li 2 O and SiO 2 , we can obtain different lithium silicate solids which exhibit different thermodynamic behaviors. Based on our results, three mixing scenarios are discussed to provide general guidelines for designing new CO2 sorbents to fit practical needs.

54 ENVIRONMENTAL SCIENCES↗

Sulfur Saturation Limits in Silicate Melts and their Implications for Core Formation Scenarios for Terrestrial Planets

This study explores the controls of temperature, pressure, and silicate melt composition on S solubility in silicate liquids. The solubility of S in FeO-containing silicate melts in equilibrium with metal sulfide increases significantly with increasing temperature but decreases with increasing pressure. The silicate melt structure also exercises a control on S solubility. Increasing the degree of polymerization of the silicate melt structure lowers the S solubility in the silicate liquid. The new set of experimental data is used to expand the model of Mavrogenes and O'Neill(1999) for S solubility in silicate liquids by incorporating the influence of the silicate melt structure. The expected S solubility in the ascending magma is calculated using the expanded model. Because the negative pressure dependence of S solubility is more influential than the positive temperature dependence, decompression and adiabatic ascent of a formerly S-saturated silicate magma will lead to S undersaturation. A primitive magma that is S-saturated in its source region will, therefore, become S-undersaturated as it ascends to shallower depth. In order to precipitate magmatic sulfides, the magma must first cool and undergo fractional crystallization to reach S saturation. The S content in a metallic liquid that is in equilibrium with a magma ocean that contains approx. 200 ppm S (i.e., Earth's bulk mantle S content) ranges from 5.5 to 12 wt% S. This range of S values encompasses the amount of S (9 to 12 wt%) that would be present in the outer core if S is the light element. Thus, the Earth's proto-mantle could be in equilibrium (in terms of the preserved S abundance) with a core-forming metallic phase.

Holzheid, Astrid↗

Phosphorus Equilibria Among Mafic Silicate Phases

Phosphorus incorporation in major rock-forming silicate minerals has the following implications: (1) Reactions between phosphorus-hosting major silicates and accessory phosphates, which are also major trace element carriers, may control the stability of the latter and thus may affect the amount of phosphorus and other trace elements released to the coexisting melt or fluid phase. (2) Less of a phosphate mineral is needed to account for the bulk phosphorus of planetaty mantles. (3) During partial melting of mantle mineral assemblages or equilibrium fractional crystallization of basaltic magmas, and in the absence or prior to saturation with a phosphate mineral, silicate melts may become enriched in phosphorus, especially in the geochemically important low melt fraction regime, Although the small differences in the ionic radii of IVp5+, IVSi4+, and IV Al3+ makes phosphoms incorporation into crystalline silicates perhaps unsurprising, isostructural silicate and phosphate crystalline solids do not readily form solutions, e.g., (Fe, Mg)2SiO4 vs. LiMgPO4, SiO)2 VS. AlPO4. Nonetheless, there are reports of, poorly characterized silico-phosphate phases in angrites , 2-4 wt% P2O5 in olivine and pyroxene grains in pallasites and reduced terestrial basalts which are little understood but potentially useful, and up to 17 wt% P2O5 in olivine from ancient slags. However, such enrichments are rare and only underscore the likelihood of phosphoms incorporation in silicate minerals. The mechanisms that allow phosphorus to enter major rock-forming silicate minerals (e.g., Oliv, Px, Gt) remain little understood and the relevant data base is limited. Nonetheless, old and new high-pressure (5-10 GPa) experimental data suggest that P2O5 wt% decreases from silica-poor to silica-rich compositions or from orthosilicate to chain silicate structures (garnet > olivine > orthopyroxene) which implies that phosphorus incorporation in silicates is perhaps more structure-than site-specific. The data also indicate that DXVliQP2O5 decrease in the same order, but DOVLiQP2O5 and DOpx/LiQP205 are likely constant, respectively equal to 0.08(3) and 0.007(4), in contrast, DG1ILiQP205 increases from 0.15(3) to 0.36(10) as garnet becomes majoritic, thus silica-enriched, and may also depend on liquid composition (SiO2, P2O5 and Na2O wt%).

Berlin, Jana↗

AN INVESTIGATION INTO THE ORIGIN OF Fe-RICH PRESOLAR SILICATES IN ACFER 094

Presolar silicate and oxide grains from primitive meteorites are recognized as 'stardust' on the basis of their extremely anomalous O isotopic compositions. We report data on 48 O-anomalous grains that were identified in grain size separates of the ungrouped carbonaceous chondrite Acfer 094. A majority of these grains exhibit high {sup 17}O/{sup 16}O isotopic ratios along with solar to sub-solar {sup 18}O/{sup 16}O ratios and may have originated in low-mass stars with close-to-solar metallicity. Four silicate grains that contain {sup 18}O enrichments were also measured for their Si isotopes. A comparison of their O and Si isotopic compositions with model predictions indicates that these {sup 18}O-rich grains may have formed in supernova ejecta. Four of the O-anomalous grains are oxides while the remaining 44 are silicates, based on elemental compositions determined by Auger spectroscopy. The presolar oxides include a TiO{sub 2} grain and a grain with spinel stoichiometry. The silicate grains largely exhibit ferromagnesian compositions, although a few grains also contain small amounts of Ca and/or Al. Stoichiometric silicates were further classified as either olivine-like or pyroxene-like, and in this study pyroxene-like grains are more abundant than olivine-like ones. The majority of silicates contain more Fe than Mg, including a few grains with Fe-rich end-member compositions. Spectroscopic observations indicate the presence of Mg-rich silicates in the atmospheres of stars and the interstellar medium. Mg-rich minerals such as forsterite and enstatite form by equilibrium condensation in stellar environments. However, non-equilibrium condensation can result in higher Fe contents and the occurrence of such processes in the outflows of stars may account for the Fe-rich grains. Alternatively, secondary processes may play a role in producing the Fe enrichments observed in the presolar silicate grains identified in the matrix of Acfer 094.

79 ASTRONOMY AND ASTROPHYSICS↗

Compositional effects on Si–OH bond length in hydrous silicates with implications for trends in the SiOH acidity

Theoretical calculations of the structure and Brønsted acidity of SiOH groups in silica clusters have never addressed the question if these vary with the degree of SiOH deprotonation. In this connection, a statistical analysis is presented of Si–OH bond lengths in crystalline hydrogen silicates with well-determined structures with a special emphasis placed on effects of the silicate composition. It is found that among hydrogen silicates of large cations with low charges the Si–OH bonds are always longer than terminal Si–O bonds in the same anion and correlate in length with the anionic charge per tetrahedron. The findings are explained by steric limitations on charge balancing at oxygen atoms by hydrogen bonds and/or cations. It is suggested that similar limitations and imbalances may underlie the well-known trends in the Brønsted acidity of silicic acids and silicas in aqueous media: decreased acidity with increased SiOH deprotonation and increased acidity with increased tetrahedra connectivity. - Graphical abstract: Si–OH bonds in crystalline silicates lengthen with the anionic charge per tetrahedron, which is in parallel with the well-known trend of decreased acidity of silicic acids and silicas in solution with increased degree of deprotonation. - Highlights: • Si–OH bonds in alkali hydrogen silicates are always longer than terminal Si–O bonds. • Si–OH bonds in silicates lengthen with the anionic charge per tetrahedron. • The Si–OH bond elongation results from inherent underbonding of terminal O atoms. • The longer the Si–OH bond, the less acidic the OH group is.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mg/Fe FRACTIONATION IN CIRCUMSTELLAR SILICATE DUST INVOLVED IN CRYSTALLIZATION

Infrared astronomical observations of oxygen-rich young and evolved stars show that only magnesium-rich crystalline silicates exist in circumstellar regions, and iron, one of the most important dust-forming elements, is extremely depleted. The compositional characteristic of circumstellar crystalline silicates is fundamentally different from that of primitive extraterrestrial materials in our solar system, such as chondritic meteorites and interplanetary dust particles. Amorphous silicates are ubiquitous and abundant in space, and are a promising carrier of iron. However, since the first detection of crystalline silicates, there has been an unsolved inconsistency due to differing compositions of coexisting crystalline and amorphous phases, considering that amorphous silicates have been expected to be precursors of these crystals. Here we show the first experimental evidence that Fe-depleted olivine can be formed by crystallization via thermal heating of FeO-bearing amorphous silicates under subsolidus conditions. Mg/Fe fractionation involved in crystallization makes possible to coexist Mg-rich crystalline silicates with Fe-bearing amorphous silicates around stars.

79 ASTRONOMY AND ASTROPHYSICS↗

A complete census of silicate features in the mid-infrared spectra of active galaxies

We present a comprehensive study of the silicate features at 9.7 and 18 μm of a sample of almost 800 active galactic nuclei (AGNs) with available spectra from the Spitzer InfraRed Spectrograph (IRS). We measure the strength of the silicate feature at 9.7 μm, S {sub 9.7}, before and after subtracting the host galaxy emission from the IRS spectra. The number of type 1 and 2 AGNs with the feature in emission increases by 20 and 50%, respectively, once the host galaxy is removed, while 35% of objects with this feature originally in absorption exhibit it in even deeper absorption. The peak of S {sub 9.7}, λ{sub peak}, has a bimodal distribution when the feature is in emission, with about 65% of the cases showing λ{sub peak}>10.2 μm. Silicates can appear in emission in objects with mid-infrared (MIR) luminosity spanning over six orders of magnitude. The derived distributions of the strength of the silicate features at 9.7 and 18 μm provide a solid test bed for modeling the dust distribution in AGNs. Clumpiness is needed in order to produce absorption features in unobscured AGNs and can also cause the silicates to be in absorption at 9.7 μm and in emission at 18 μm in type 1 sources. We find the “cosmic” silicates of Ossenkopf et al. to be more consistent with the observations than Draine's “astronomical” silicates. Finally, we discuss the possibility of a foreground absorber to explain the deep silicate absorption features in the MIR spectra of some type 2 AGNs.

79 ASTRONOMY AND ASTROPHYSICS↗

A MODEL FOR THE DUST ENVELOPE OF THE SILICATE CARBON STAR IRAS 09425-6040

IRAS 09425-6040 (I09425) is a silicate carbon star with conspicuous crystalline silicate and water-ice features and emission excesses in the far-infrared and millimeter (mm) wavelength ranges. To understand properties of the dust envelope of I09425, we propose a physical model based on the observations and known properties of asymptotic giant branch stars and dust. We perform radiative transfer model calculations using multiple dust shells and disks with various dust species. We compare the model results with the observed spectral energy distribution (SED) acquired with different telescopes. We find that the physical model for I09425 using multiple shells of carbon and silicate dust and multiple disks of amorphous and crystalline silicates reproduces the observed SED fairly well. This object looks to have detached cold O-rich (silicate and water-ice) dust shells, which could be remnants of the recent chemical transition from O to C and an inner C-rich dust shell. A long-lived thin disk of very large silicate grains can reproduce the emission excess in the mm wavelength band and a recently formed thick disk of crystalline silicates can reproduce the prominent emission features in the spectral range 8–45 μm. The highly crystallized silicates could be recently formed by high temperature annealing due to the last O-rich superwind just before the chemical transition of the central star. I09425 could be a rare object that has the remnants of past O-rich stellar winds in the outer shells as well as in the circumbinary disks.

79 ASTRONOMY AND ASTROPHYSICS↗

Fundamental Study on Temperature Dependence of Deposition Rate of Silicic Acid - 13270

The dynamic behavior of the silicic acid is one of the key factors to estimate the condition of the repository system after the backfill. This study experimentally examined the temperature dependence of dynamic behavior of supersaturated silicic acid in the co-presence of solid phase, considering Na ions around the repository, and evaluated the deposition rate constant, k, of silicic acid by using the first-order reaction equation considering the specific surface area. The values of k were in the range of 1.0x10{sup -11} to 1.0x10{sup -9} m/s in the temperature range of 288 K to 323 K. The deposition rate became larger with increments of temperature under the Na ion free condition. Besides, in the case of Na ions 0.6 M, colloidal silicic acid decreased dramatically at a certain time. This means that the diameter of the colloidal silicic acid became larger than the pore size of filter (0.45 μm) due to bridging of colloidal silicic acid. Furthermore, this study estimated the range of altering area and the aperture of flow-path in various value of k corresponding to temperature by using advection-dispersion model. The concentration in the flow-path became lower with increments of temperature, and when the value of k is larger than 1.0x10{sup -11} m/s, the deposition range of supersaturated silicic acid was estimated to be less than 20 m around the repository. In addition, the deposition of supersaturated silicic acid led the decrement of flow-path aperture, which was remarkable under the condition of relatively high temperature. Such a clogging in flow paths is expected as a retardation effect of radionuclides. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗