Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEMICONDUCTOR MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enhancing the cooling performance of thermocouples: a power-constrained topology optimization procedure

Abstract Heat pumping through thermoelectric devices has many advantages over traditional cooling. However, their current efficiency is a limiting factor in their implementation. In this paper, we approach the non-convex topology optimization of thermoelectrical elements for cooling applications through the method of moving asymptotes (MMA) to improve their cooling capabilities per watt usage. The optimization problem is defined for a given power budget, aiming for the minimum temperature with a known heat pumping need. The introduction of power as a constraint justifies the introduction of the voltage gradient across the thermocouple as a design variable to maintain the thermoelectrical device in its optimum power-to-heat extraction ratio. To better understand the convergence of this non-convex problem, we present a two-variable analytical thermoelectric optimization model. This example provides information on how to select the penalty parameters used to scale the three material coefficients involved in the problem to obtain lower objective values and better convergence using MMA. The analytical model shows the non-convexity of the problem and provides the recommendation to use penalization coefficients of the form $$p_k=p_{\sigma }>p_{\alpha }=1$$ p k = p σ > p α = 1 for the thermal conductivity, electrical conductivity, and Seebeck coefficients. We tested these penalization coefficients through optimizations of a model based on the 1MC10-031 commercial thermoelectric-cooler (TEC) using the finite element method (FEM). These penalization coefficients provided local minima without the need for volume constraints. With this procedure, we found designs that provided temperatures close to 10 degrees lower using 60% less semiconductor material volume compared to the initial design.

Gutiérrez, G. Reales↗
DOE OSTI2026

Importance of finite-size corrections for accurate ab initio modeling of carrier capture at semiconductor defects: A case study of substitutional C N in GaN

In ab initio studies of carrier-capture processes in defective semiconductor materials, the single-effective-mode formalism and the static-coupling approximation have become the predominant theoretical approaches for determining carrier-capture coefficients. The single-mode formalism relies on accurate nonequilibrium defect energies obtained from density-functional theory (DFT), where required inputs are a series of configurationally displaced, defect-containing supercells obtained using an interpolative ansatz, and where the DFT outputs are corresponding total energies that have traditionally been postprocessed using a long-established ground-state formulation of finite-size corrections and defect-formation energies. This formulation remains commonly used even though the defects that form a configuration-coordinate (CC) diagram typically exist as structures that are displaced from the ground state. To remedy this inconsistency, Kumagai has recently proposed novel methods for implementing finite-size corrections specifically intended for DFT calculations of the defect energies used to construct CC diagrams and implement the single-mode formalism [Y. Kumagai, Phys. Rev. B 107, L220101 (2023)]. Kumagai's approach builds on the latest finite-size-correction methods introduced to describe vertical charge-state transitions for charge-localizing point defects in semiconductors and insulators [T. Gake et al., Phys. Rev. B 101, 020102 (2020); S. Falletta et al., Phys. Rev. B 102, 041115 (2020)]. The newly identified finite-size artifact treated in these studies is the polarization charge induced on a configurationally frozen defect and its subsequent interaction with a vertical transition in charge state. In this work, we evaluate Kumagai's proposed methodology by applying it in a high-precision DFT study of carrier capture by substitutional C N in GaN, a well-characterized and technologically relevant defect and material. We have rigorously calculated C N defect energies across various supercell sizes for each defect configuration and charge state on the hole-capture CC diagram of C N (𝑞=−1), enabling a direct comparison of the slopes of the defect energies versus inverse cell size with those predicted by Kumagai. The most consequential prediction of Kumagai's method is that these slopes distinctly vary as the square of the linear-interpolation parameter used to construct the nonequilibrium defect configurations. Our results quantitatively support this prediction. Moreover, with these new finite-size corrections and multiple-cell-size DFT calculations in place, we find that the classical energy barrier for hole capture by C N (𝑞=−1) in GaN decreases to 0.092–0.127 eV. This finding confirms the recent ≈ 0.1 eV prediction of Reshchikov based on the weak temperature dependence for hole capture observed in photoluminescence experiments [M. A. Reshchikov, J. Appl. Phys. 129, 121101 (2021)]. These results stand in stark contrast to previously calculated barriers of 0.486 and 0.73 eV, which also used the single-mode formalism but were obtained by instead using ground-state-based finite-size corrections. Our reduced classical barrier for capture increases the temperature-dependent hole-capture coefficient of a C N (𝑞=−1) defect by more than two to four orders of magnitude for temperatures of 100–600 K, compared to the previous 0.486 eV results. While other defects may not be as dramatically affected as here, we suggest that incorporating proper finite-size corrections for the vertical-transition-like states embedded within CC diagrams is an essential, yet previously unrecognized, component of accurate modeling of carrier-capture when using the single-effective-mode formalism.

dielectric properties↗
DOE OSTI2026

Synergistic CuWO 4 /NiS 2 Binary Nanostructures for Efficient Photocatalytic Hydrogen Production

A viable and ecologically safe method for producing green hydrogen is photocatalytic hydrogen (H 2 ) production. However, the development of effective semiconductor materials with improved activity and long-term stability is still a major obstacle. Here, in this work, we report the development of a broadband-gap, UV light-responsive CuWO 4 /NiS 2 nanocomposite using simple hydrothermal and wet impregnation techniques. The hybrid systems, with photocatalytic presentation, were thoroughly assessed using spectroscopic, photophysical, and microscopic characterization methods. The optimized CuWO 4 /NiS 2 nanostructure demonstrated an impressive H 2 generation rate of 28.2 mmol h –1 g –1 under light irradiation, which is roughly 2.71 and 3.28 times greater than those of pristine CuWO 4 (10.4) and NiS 2 (8.6 mmol h -1 g (cat) -1 ), respectively. The enhanced presentation is ascribed to the synergetic interface between the coupled semiconductors, which facilitates the formation of a nanostructure. This arrangement inhibits electron–hole recombination and encourages effective charge carrier parting. Additionally, compared with pristine CuWO 4 and NiS 2 , respectively, the CuWO 4 /NiS 2 composite showed a noticeably greater photocurrent density. The developed nanostructured CuWO 4 /NiS 2 displayed a 28.6% quantum efficiency at 450 nm. These outcomes validate CuWO 4 /NiS 2 ’s significant aptitude as a non-noble-metal photocatalyst for the production of sustainable hydrogen.

CuWO4/NiS2↗
DOE OSTI2020

Anomalous Behavior of 2D Janus Excitonic Layers under Extreme Pressures

Newly discovered 2D Janus transition metal dichalcogenides layers have gained much attention from a theory perspective owing to their unique atomic structure and exotic materials properties, but little to no experimental data are available on these materials. Here, experimental and theoretical studies establish the vibrational and optical behavior of 2D Janus S–W–Se and S–Mo–Se monolayers under high pressures for the first time. Chemical vapor deposition (CVD)-grown classical transition metal dichalcogenides (TMD) monolayers are first transferred onto van der Waals (vdW) mica substrates and converted to 2D Janus sheets by surface plasma technique, and then integrated into a 500 µm size diamond anvil cell for high-pressure studies. Overall, the results show that 2D Janus layers do not undergo phase transition up to 15 GPa, and in this pressure regime, their vibrational modes exhibit a nonmonotonic response to the applied pressures (dω/dP). Interestingly, these 2D Janus monolayers exhibit unique blueshift in photoluminescence (PL) upon compression, which is in contrast to many other traditional semiconductor materials. Overall theoretical simulations offer in-depth insights and reveal that the overall optical response is a result of competition between the ab-plane (blueshift) and c-axis (redshift) compression. The overall findings shed the very first light on how 2D Janus monolayers respond under extreme pressures and expand the fundamental understanding of these materials.

2D Janus monolayers↗
DOE OSTI2024

Investigation of Defect Physics for Efficient, Durable and Ubiquitous Perovskite Solar Modules (Final Technical Report)

Organometal halide perovskite solar cells have experienced eye-catching improvements in its recent few years. It serves as one of the most promising candidates to replace the currently widely used silicon-based solar modules. To implement its final step to the real application, functional longevity becomes the dernier continent to conquer. As a polycrystalline material, defect plays critical role in the efficiency and stability of the perovskite solar cells. Thus, the investigation of the defect physics of the perovskite layer is indispensable in this research field. However, hard evidence and a consensus are still lacking in terms of the specific nature of the defects and their effects on performance and hysteresis, and perhaps even more importantly, there is absence of fundamental understanding of the correlations between the defects and long-term operational stability of the device. A more fundamental understanding of the nature of defects in perovskite materials is of paramount importance to progress their efficiency and durability. In this work we propose in-depth studies of correlations of defects with performance and stability of perovskite solar cells. Our project aimed 1) to investigate the defects physics in perovskite solar cells, and 2) to develop a comprehensive understanding and physical model of defects and its influence on performance and stability of perovskite solar cells. With the support from program manager, Peter Lobaccaro, and the Solar Energy Technologies Office of U.S. Department of Energy, the project ends with impact achievements. Our research results have systematically provided strategies to analyze the influences of constructive molecular configurations to the charged defects in the perovskite lattices and developed in-depth understanding of chemical additive approach to improve the perovskite solar cell performance and stability. As history has shown us, control over defect properties of semiconductor materials is the key to achieving high performance and low cost devices. Therefore, the potential impact of unlocking the understanding and manipulation of defects in perovskites is great, enabling this technology to realize SETO goals. The research project is highly productive with 18 published papers in three years in top-level journals such as Science, Nature, Nature Materials, Nature Communications, Journal of American Chemistry Society, Joule, Advanced Materials, and Nano Letters. These works have drawn great attention nationwide with notable total citations over 700 times from 2020 to 2022.

14 SOLAR ENERGY↗
DOE OSTI2021

Identification of dislocation-related and point-defects in III-As layers for silicon photonics applications

Abstract The aim of this paper is to identify, analyze and compare the defects present in III-As, as a function of dislocation density, and as a function of the presence/absence of quantum dots (QDs). Such materials are of fundamental importance for the development of lasers and photodiodes for silicon photonics. The study is based on an extensive deep-level transient spectroscopy investigation, carried out on GaAs pin diodes grown on Si and on GaAs (that differ in the dislocation density), with and without embedded QDs. The original results described in this paper demonstrate that: (a) we were able to identify four different defects within the device grown on Si (three electron and one hole traps) and one defect (hole trap) in the device on GaAs, common to both samples; (b) all the majority carrier traps identified are located near midgap, i.e. are efficient non-radiative recombination centers; (c) such defects are absent (or non-detectable) in the sample grown on GaAs substrate, having a very low dislocation density; (d) the presence of QDs does not result in additional defects within the semiconductor material; (e) the analysis of the capture kinetics revealed that two of the identified traps are related to point defects, whereas the other two traps can be associated with point defects located near a dislocation; (f) a comparison with previous reports indicate that the detected traps are related to native III-As defects, or to oxygen-related complexes.

Physics↗
DOE OSTI2020

Conjugated Polymer Controlled Morphology and Charge Transport of Small-Molecule Organic Semiconductors

In this study, we report an efective approach to tune the crystallization, microstructure and charge transport of solution-processed organic semiconductors by blending with a conjugated polymer additive poly(3-hexylthiophene) (P3HT). When 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) was used as a model semiconductor material to mix with diferent amount of P3HT, their intermolecular interactions led to distinctive TIPS pentacene flm morphologies, including randomly-oriented crystal ribbons, elongated needles with enhanced long-range order, and grasslike curved microwires with interlinkages. Each type of morphology was found to further correlate to considerably diferent charge transport and device performance. As compared to pristine TIPS pentacene devices, bottom-gate, top-contact OTFTs with 2% in weight P3HT additive showed a 2-fold and 5-fold improvement of average feld-efect mobility and performance consistency (defned as the ratio of average mobility to the standard deviation), respectively. The improvement in transistor electrical performance can be attributed to the combined efect of enhanced crystal orientation and uniformity, as well as increased areal coverage. This work can be applied beyond the particular example demonstrated in this study and to tune the charge transport of other small-molecule organic semiconductors in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Trap-assisted Auger-Meitner recombination in GaN p-i-n diodes

Most properties of semiconductor devices are dominated by shallow impurities. However, deep defects often play an important role, for instance, in recombination processes or high field transport. While a variety of techniques are available to assess the density and energy levels of impurities, other properties, such as the recombination mechanisms of the defects, escape observation. We report on the direct measurement of hot electrons generated by trap-assisted Auger-Meitner recombination (TAAR) in GaN p-i-n diodes. By performing electron emission spectroscopy (EES) on diodes with surfaces activated to negative electron affinity by cesium, we observe the expected overflow electrons of p-i-n diodes under low current injection. However, when operating the devices at higher current densities, as low as ∼25 A/c⁢m 2 , we measure the emission of high-energy electrons. At variance with the observed hot electrons in light-emitting diodes (LEDs) using EES, the hot electrons generated in p-i-n diodes at our tested currents cannot be from eeh Auger-Meitner recombination due to the diodes' significantly lower carrier densities compared to those in LEDs. During our measurements, we observe the emission of accumulated electrons with energies ∼0.42 eV, ∼0.99 eV, ∼1.43 eV, and ∼2.32 eV above the conduction-band minimum (CBM) at various bias conditions, suggesting the existence of conduction-band features in GaN at these energies where electrons can be long-lived, such as satellite-valley minima and inflection points. We also measure incompletely relaxed hot electrons approaching energies 1.97 ± 0.13 eV and 2.94 ± 0.13 eV above the CBM, as the diodes are biased to high currents, suggesting at least some of the TAAR partaking defects have an energy level ≳1.97 eV and ≳2.94 eV away from either the conduction or valence band edges. Additionally, at our highest operating currents, we measure hot electrons with energies 3.28 ± 0.13 eV above the CBM, providing direct evidence of TAAR processes involving shallow impurities. This unexpected observation of TAAR in GaN p-i-n diodes spotlights the importance of further studies of defects in GaN and the necessity to incorporate the multi-phonon emission, radiative, and TAAR capture steps of defect-assisted recombination cycles into device modeling. Furthermore, this experiment demonstrates the applicability of the simplest semiconductor structures, p-i-n diodes, as a test bed to study the rich recombination physics of semiconductor materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Defect Quantification in Metal Halide Perovskites Anticipates Photoluminescence and Photovoltaic Performance

Semiconductor material optimization requires quantification of performance and stability-dependent near-valence maximum and near-conduction minimum defects with sufficient energy resolution and sensitivity. In this work, we utilize a spectroscopy-electrochemistry approach to resolve the energy-distinct donor and acceptor defect concentrations in wide-gap (Cs .05 FA .79 MA .16 )Pb(I .87 Br .13 ) 3 perovskites, benchmarked against photoluminescence and photovoltaic device performance. Monitoring charge transfer events to electron acceptor and donor molecules within solid electrolyte top contacts enables defect quantification below 10 15 cm –3 at an energy resolution of 10 meV under device-relevant bias, well below levels reported by other methods. Further method sensitivity is demonstrated for defects arising from <2% formamidinium concentration modifications, mimicking compositional imperfections resulting from nonoptimized processing. This method provides the first complete perovskite energetic diagrams with small changes in composition, is nondestructive, compatible with in-line processing characterization, and will enable the semiconductor community to link molecular origins of defects with limitations in device performance across a wide array of optoelectronic platforms.

14 SOLAR ENERGY↗
DOE OSTI2024

High-purity germanium semiconductor modeling in the detector response function toolkit

In this study, we have extended the detector response function toolkit (DRiFT) to provide modeling capabilities of semiconductor sensors. DRiFT provides realistic nuclear instrumentation response by post-processing Monte-Carlo N-particle (MCNP®) radiation transport outputs. MCNP® is capable of modeling radiation transport in complex environments, but has limited detector physics and readout electronics modeling capabilities. Semiconductor detector response can be calculated with a high-fidelity for a flexible range of environments by utilizing MCNP® to simulate radiation interactions inside of detector volumes, and then using DRiFT to model charge transport and signal formation in the semiconductor, as well as the readout electronics. DRiFT models charge transport in the semiconductor, the preamplifier, shaping amplifier, pulse pile-up, and electronic noise to generate detector response. The semiconductor application in DRiFT can model a range of semiconductor materials, shapes, and sizes; and is demonstrated here for a large volume coaxial high-purity germanium (HPGe) detector. Here, we compare detector response functions of a coaxial HPGe detector with measurement of 60 Co, 133 Ba, and 137 Cs at varying count rates, and we conduct a parameter study to demonstrate the effect of changing parameters in the DRiFT simulation. The HPGe detector response function shows excellent agreement with measurements of difference sources with varying dead times and count rates.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

A guide on modeling electrostatics of semiconductor detectors in COMSOL Multiphysics ® for DRiFT

Adding a new semiconductor detector into the detector response function toolkit (DRiFT) requires a model of the electric potential and the electric field. To get an accurate electrostatics model, the geometry of the detector should be modeled as closely to the real geometry as feasible, including the semiconductor materials, doping layers and concentrations, and contacts. Since the electric field and potential are used to calculate the induced signal, the results of the detector response functions are largely influenced by the electrostatics models. Initial electrostatics models were completed using Silvaco, however, this document provides guidance on using COMSOL Mulitphysics ® (COMSOL) to model the detectors to give users additional flexibility. Guidance on using COMSOL and its user interface are mostly left out of this document, but best practices for geometry, modeling methods, and data format/exporting are included to help users generate models that are compatible with DRiFT, prevents bugs, issues, and inaccuracies during charge collection calculations. The following summary provides an overview of the document.

42 ENGINEERING↗
DOE OSTI2024

Enhanced imaging of electronic hot spots using quantum squeezed light

Detecting electronic hot spots is important for understanding the heat dissipation and thermal management of electronic and semiconductor devices. Optical thermoreflective imaging is being used to perform precise temporal and spatial imaging of heat on wires and semiconductor materials. We apply quantum squeezed light to perform thermoreflective imaging on micro-wires, surpassing the shot-noise limit of classical approaches. We obtain a far-field temperature sensing accuracy of 42 mK after 50 ms of averaging and show that a 256×256 pixel image can be constructed with such sensitivity in 10 min. We can further obtain single-shot temperature sensing of 1.6 K after only 10 μs of averaging, enabling a dynamical study of heat dissipation. Not only do the quantum images provide accurate spatiotemporal information about heat distribution but also the measure of quantum correlation provides additional information, inaccessible by classical techniques, which can lead to a better understanding of the dynamics. We apply the technique to both aluminum and niobium microwires and discuss the applications of the technique in studying electron dynamics at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Spectroscopic Studies of Charge-Transfer Character and Photoresponses of F 4 TCNQ-Based Donor–Acceptor Complexes

F 4 TCNQ (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) is used widely as a hole-doping agent in photoresponsive organic semiconducting materials, yet relatively little is known about the photoresponses of the F 4 TCNQ· - anion generated via doping. Furthermore, there is still relatively little systematic exploration of how the properties of the local material or chemical environment impacts the driving force for generating these charge-transfer complexes. Here we present spectroscopic and photophysical studies of F 4 TCNQ in charge-transfer complexes (CTCs) with the electron donor N,N’-Diphenyl-N-N’-di-p-tolylbenzene-1,4-diamine (MPDA) both in dichloroethane solution and polystyrene matrices. Integer charge transfer (ICT) between donor and acceptor occurs readily in dichloroethane solvent to form F 4 TCNQ· - :MPDA + CTCs, due to a ~150 mV difference in MPDA + /MPDA and F 4 TCNQ/F 4 TCNQ· - reduction potentials. Ultrafast spectroscopic studies of the CTC as well as electrochemically generated F 4 TCNQ· - and MDPA + reveal that the photoresponses of these CTCs are dominated by that of the dopant anion, including rapid deactivation (800 fs) after excitation to the anion D 1 excited state, followed by slower (~10 ps) vibrational cooling in the anion D 0 state. Excitation to the higher-lying D 2 state results in a rapid relaxation to the D 1 state, in contrast to direct D 2 -D 0 relaxation previously observed for F 4 TCNQ· - in gas phase. CTCs embedded in polystyrene (PS) matrices are observed to lose their integer charge-transfer character upon evaporation of solvent, as evidenced by changes to electronic and vibrational absorption features associated with F 4 TCNQ· - . This change is attributed to the loss of solvent stabilization of the ion pair formed through the charge-transfer reaction. Ultrafast spectral measurements reveal that the photoresponses of the partial charge-transfer (PCT) species embedded in PS are still highly similar to those of the ICT species and unlike that of neutral F 4 TCNQ, implying the electronic properties of the PCT state are likewise dominated by properties of the reduced acceptor molecule. We conclude that excitation of ICT or PCT states introduces optical losses for photoresponses of doped organic semiconductor materials due to the large anion absorption cross section and its rapid, dissipative deactivation dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Role of the junction voltage on the overflow current in light-emitting diodes

Quantum-well (QW)-based light emitters, such as light-emitting diodes (LEDs) and lasers, of various semiconductor materials experience a reduction in their efficiency when operating at higher temperatures, a phenomenon referred to as “thermal droop.” Among the various claims on the origins of thermal droop, an increased overflow current with increasing temperatures is a common contender. Since overflow of carriers can only occur when the junction voltage 𝑉 Junction approaches the built-in voltage 𝑉 BI of any diodes, we develop a simple method relating the difference between 𝑉 Junction and 𝑉 BI to approximate the upper limit of overflow occurring in QW-based light-emitting diodes. The measured difference between 𝑉 Junction and 𝑉 BI of state-of-the-art commercial blue and green In⁢Ga⁢N-based LEDs at temperatures up to ∼450 K suggests negligible overflow. To further experimentally verify the absence of overflow, we perform temperature-dependent electron emission spectroscopy on the same commercial blue and green LEDs and find no evidence of thermally enhanced overflow carriers up to ∼450 K. In agreement with our claims that 𝑉 Junction must approach 𝑉 BI for overflow to occur, two-dimensional temperature-dependent electrical simulations of violet, blue, and green LEDs including alloy disorder and V-defects demonstrate that overflow can be significant in violet LEDs, where the small band offset between the In⁢Ga⁢N QW and Ga⁢N cladding layers due to the larger QW bandgap requires larger 𝑉 Junction to reach standard operating current densities, thereby approaching 𝑉 BI . By contrast, simulations indicate that overflow is negligible in blue and green LEDs, whose smaller QW bandgaps result in smaller quasi-Fermi levels difference to reach significant carrier injection, resulting in a 𝑉 Junction much smaller than 𝑉 BI up to large operating current densities. Considering that overflow is negligible in blue and longer-wavelength LEDs, and our observations of the large thermal droop occurring at low current densities, where Shockley-Read-Hall (SRH) recombination dominates, we conclude that thermally enhanced SRH processes are the most significant contributor to thermal droop. Finally, we also simulate the carrier densities in the different QWs of a multiple-QW LED and observe a reduction in the total carrier density at a given operating current density, which results in a decrease in the total Auger-Meitner current of the LED from just the thermally enhanced carrier redistribution among QWs without taking any possible additional temperature dependence of their recombination coefficients. Taking all this into account, minimizing thermal droop effects in LEDs can be achieved by a reduction in defect density, using wider band gap p-n junction-defining cladding layers, and operating at higher currents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Shape-Controlled NaTaO 3 by Flux-Mediated Synthesis

NaTaO 3 is a stable and wide bandgap n-type semiconductor material with many different applications. Here, a flux-mediated synthesis method is presented for NaTaO 3 resulting in highly distinctive, substrate covering shapes via precursor chemistry variation at comparatively low temperatures. It is found that the microstructure of the resulting NaTaO 3 films can be varied from nanocubes to smooth thin films. These shapes and surface chemistries can be correlated by employing density functional theory calculations and surface sensitive X-ray photoemission spectroscopy. This study provides guidance on how to synthesize the material and tailor its shape and surface termination for different applications. Finally, as a proof of concept of one possible application, NaTaO 3 is applied to perovskite solar cells as the electron transport layer, resulting in conversion efficiencies of >19%. Further, this study provides a new strategy for designing ternary oxide thin films for renewable energy applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Integrated Micro‐Scale Concentrating Photovoltaics: A Scalable Path Toward High‐Efficiency, Low‐Cost Solar Power

The global energy market is seeing increases in the electricity demand of a couple of percentage points annually. The photovoltaic (PV) industry is also growing rapidly every year. One of the PV technologies is concentrator photovoltaics (CPV). CPV uses high‐efficiency multijunction solar cells and optics to concentrate sunlight, thereby significantly reducing the amount of semiconductor material needed. Yet, due to the high upfont manufacturing cost of CPV, it currently does not offer a competitive price against silicon PV. With this a new branch is introduced to the industry, micro‐CPV, which can be broadly explained as the miniaturization of the solar cells and optical components. The motivation for micro‐CPV is lowering the cost by decreasing the material volume and enabling new system architectures and high‐throughput manufacturing methods, while still maintaining high electrical efficiencies, taking advantage of a lower thermal load, shorter optical paths, lower resistive losses, and lower material volumes. Herein, a comprehensive review of the technological advances is presented, key synergies between micro‐CPV and other industries sharing similar challenges are identified, exemplified by micro‐light emitting diodes display manufacturing. New assembly process development in these industries will facilitate commercial adoption of micro‐CPV with continued miniaturization while driving down the cost.

Jost, Norman↗
DOE OSTI2022

Environmental Benefits of Closing the Solar Manufacturing and Recycling Loop: Preparation of Solar Manufacturing Inventories

The cumulative global solar panel waste stream is projected to reach between 60 and 78 million tonnes by 2050. Steps towards developing, demonstrating, and implementing processes that recover glass, metals, and semiconductor materials from end-of-life solar panels have already been taken. However, these processes result in the downcycling of most secondary solar materials. Critically, the costs and benefits of capturing these secondary materials for use in new solar panels are unknown. To evaluate the environmental benefit associated with solar material recycling and reuse in next generation panels, prior inventories must be updated and prepared for integration with recycling processes to examine the benefit of closing the material loop between solar panel end-of-life and new panel manufacturing. This current work describes steps taken to upgrade existing inventories that detail the manufacturing of cadmium-telluride (CdTe) panels from the Ecoinvent -v2.2 life cycle inventory database to Ecoinvent -v3. During this update, material inventories were modified to capture different realistic material supply chains within the constraints of Ecoinvent -v3. Materials discussed in detail in this work include primary flat glass, aluminum, steel, copper, and CdTe. This work demonstrated that environmental indicators such as embodied carbon, acidification, and terrestrial eutrophication associated with solar panel production can be reduced by 25% to over 40% through improved primary material sourcing.

CdTe solar panels↗
DOE OSTI2023

Low-temperature liquid-phase formation of environmentally stable copper halide nanocrystal superlattices and their application to anticounterfeiting patterns

Nanocrystal superlattices have the potential to create a new class of semiconductor materials by combining the photophysical properties of individual nanocrystals with bulk-like structure performance. However, the principles underlying the direct formation of superlattices in liquid phase have not been thoroughly investigated, particularly, those consisting of exciton self-trapping metal halides. Here, in this work, we explore the formation of Cs 3 Cu 2 Br 5 nanocrystal superlattices via liquid-phase crystallization of growing nanocrystals over a reaction period of only a few seconds. Importantly, the reaction temperature and the precursor concentration were found to be key parameters governing the concomitant nanocrystal growth and superlattice formation. The resulting Cs 3 Cu 2 Br 5 superlattices had a well-defined face-centered cubic structure and emitted a single-band bright blue emission when exposed to 280 nm light. Owing to their advantages, such as low toxicity, reabsorption-free, narrow absorption, strong emission, and high environmental stability, the Cs 3 Cu 2 Br 5 superlattices were applicable to anti-counterfeiting applications. Our findings shed light on the liquid-phase assembly of nanocrystals into superlattices and highlight the potential applications of the superlattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗