Results for “SEED” — Page 6

NASA NTRSDate not supplied

Particle Seeding Method for Small-Scale, High-Pressure Nozzles

NASA tests new launch and reentry vehicle configurations in wind tunnels, where flow visualizations and quantitative flowfield measurements are often desired. Some of these vehicles have rocket motors for propulsion, retro-propulsion, or reaction control. High-pressure air is used to supply these rocket motor plumes. However, it is difficult to make off-body measurements in these regions, for several reasons. First, the plumes themselves lack seeding particles for flow diagnostics, and at the low pressures after expansion, Rayleigh scattering or other molecular techniques yield insufficient signal for flow velocity measurements. Second, the plumes displace particle-seeded tunnel air, preventing measurements in the vicinity of the plume. Third, the plumes force shock waves ahead of the vehicle, which melts the ice crystal fog commonly used for visualization and measurement techniques in certain facilities. In the current work, a novel method for seeding the flow in these small-scale, high-pressure nozzles has been devised and initially demonstrated, potentially enabling quantitative and qualitative measurements with particle-based instruments such as Doppler global velocimetry or particle image velocimetry. The method involves a Venturi contraction to draw the seed liquid out of a reservoir and into the nozzle channel, wherein shearing forces atomize the seed into particles. The concept was tested with a laser sheet visualization, which demonstrated that the flow rate of liquid spray was controllable; a valve could be adjusted to drop the flow rate by up to 65%. This relatively inexpensive and simple technique may prove useful in wind tunnel experiments involving particle-based laser diagnostics and small, high-pressure nozzles.

Aditya S. Acharya↗

NASA NTRSDate not supplied

Particle Seeding Method for Small-Scale, High-Pressure Nozzles

NASA tests new launch and reentry vehicle configurations in wind tunnels, where flow visualizations and quantitative flowfield measurements are often desired. Some of these vehicles have rocket motors for propulsion, retro-propulsion, or reaction control. High-pressure air is used to supply these rocket motor plumes. However, it is difficult to make off-body measurements in these regions, for several reasons. First, the plumes themselves lack seeding particles for flow diagnostics, and at the low pressures after expansion, Rayleigh scattering or other molecular techniques yield insufficient signal for flow velocity measurements. Second, the plumes displace particle-seeded tunnel air, preventing measurements in the vicinity of the plume. Third, the plumes force shock waves ahead of the vehicle, which melts the ice crystal fog commonly used for visualization and measurement techniques in certain facilities. In the current work, a novel method for seeding the flow in these small-scale, high-pressure nozzles has been devised and initially demonstrated, potentially enabling quantitative and qualitative measurements with particle-based instruments such as Doppler global velocimetry or particle image velocimetry. The method involves a Venturi contraction to draw the seed liquid out of a reservoir and into the nozzle channel, wherein shearing forces atomize the seed into particles. The concept was tested with a laser sheet visualization, which demonstrated that the flow rate of liquid spray was controllable; a valve could be adjusted to drop the flow rate by up to 65%. This relatively inexpensive and simple technique may prove useful in wind tunnel experiments involving particle-based laser diagnostics and small, high-pressure nozzles.

lasers↗

NASA NTRSDate not supplied

Transcriptomic Changes in Seedlings from Seeds Exposed to Simulated Space Radiation

Outside the protection of Earth’s magnetic field, living organisms are constantly exposed to space radiation that consists of energetic protons and other heavier charged particles. With the goal of manned Mars exploration, the production of fresh crop during long duration space missions can be beneficial for meeting astronauts’ nutritional and psychological needs. In our study, we not only evaluated plant/fruit morphometrics and edible fresh mass, but also analyzed transcriptomic changes in seedlings from seeds of three plant species (Arabidopsis, mizuna, and tomato) exposed to simulated Galactic Cosmic Rays(GCR) and solar particle events(SPE). The radiation experiments were performed in the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). 10-day Arabidopsis seedlings were exposed acutely (~240 cGy/hr) to simulated GCR scenarios of combined ions including protons, helium, oxygen, titanium, and/or iron ions at 40 or 80 cGy. Seeds of Arabidopsis, mizuna, and tomato were exposed to 40 or 80 cGy simulated GCR (dry seeds) or SPE (imbibed seeds) at lower dose rates(20-26 cGy/hr). Seedlings from control and irradiated seeds were then collected in RNAlater at similar growth stages with true leaves emerged. Total RNA was isolated and analyzed via Illumina whole transcriptome sequencing technology. Plant species-specific bioinformatics revealed transcriptional biomarkers and signaling pathways induced by simulated space radiation that were found to be dose, dose-rate, and species dependent. DNA damage response, stress signaling, and metabolic pathways are among the most significant changes. These data highlight some critical insights on the mechanisms of how plants respond and adapt to the space radiation environment and provide a molecular basis for crop selection and refinement in deep space exploration.

Anirudha Dixit↗

DOE OSTI2024

Seed classification with random forest models

Premise: To improve forest conservation monitoring, we developed a protocol to automatically count and identify the seeds of plant species with minimal resource requirements, making the process more efficient and less dependent on human operators. Methods and Results: Seeds from six North American conifer tree species were separated from leaf litter and imaged on a flatbed scanner. In the most successful species-classification approach, an ImageJ macro automatically extracted measurements for random forest classification in the software R. The method allows for good classification accuracy, and the same process can be used to train the model on other species. Conclusions: This protocol is an adaptable tool for efficient and consistent identification of seed species or potentially other objects. Automated seed classification is efficient and inexpensive, making it a practical solution that enhances the feasibility of large-scale monitoring projects in conservation biology.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Why Seeding Works When Nucleation Barriers Vanish

This paper explains why seeds can speed up crystallization even when the formation of new crystal nuclei is not the slow step. In zeolite synthesis, local crystalline order can form relatively early, but the material may still appear poorly crystalline by X-ray diffraction because many small crystallites are misoriented and lack long-range coherence. Using coarse-grained molecular simulations, the study showed that seeds help solve this coherence problem. Rather than primarily lowering a nucleation barrier, seeds impose a common orientation on nearby growing crystallites, allowing them to merge into larger, better aligned domains. This accelerates the development of X-ray-detectable crystallinity even if the total amount of locally ordered material has not changed much. The work changes how induction times in zeolite synthesis should be interpreted: the delay before X-ray crystallinity appears can reflect the time needed to build long-range structural coherence, not simply the time needed to form crystalline material. This provides a new explanation for why seeding is effective in growth-limited crystallization and offers design principles for controlling crystallization rate and crystal quality.

36 MATERIALS SCIENCE↗

NASA NTRS2023

Particle Seeding System Upgrades in the NASA GRC 1 × 1 Supersonic Wind Tunnel

An effort to improve the particle-based velocity measurement capability in the NASA Glenn Research Center 1'x1' Supersonic Wind Tunnel has recently been undertaken. Modifications to the pressure vessel where the seed particles are generated and inserted into the wind tunnel's pressurized air supply were implemented to reduce residence time and thus agglomeration of particles in the seeding tank. The operation of the improved seeding system was evaluated and optimized using particle image velocimetry (PIV) measurements across an isolated oblique shock wave in the facility test section. The PIV system using optimal seeding settings was also applied to make detailed measurements of the test section sidewall boundary layer height to inform model designs for future testing in this facility.

PIV↗

NASA NTRS2023

Particle Seeding System Upgrades in the NASA GRC 1' × 1' Supersonic Wind Tunnel

An effort to improve the particle-based velocity measurement capability in the NASA Glenn Research Center 1'x1' Supersonic Wind Tunnel has recently been undertaken. Modifications to the pressure vessel where the seed particles are generated and inserted into the wind tunnel's pressurized air supply were implemented to reduce residence time and thus agglomeration of particles in the seeding tank. The operation of the improved seeding system was evaluated and optimized using particle image velocimetry (PIV) measurements across an isolated oblique shock wave in the facility test section. The PIV system using optimal seeding settings was also applied to make detailed measurements of the test section sidewall boundary layer height to inform model designs for future testing in this facility.

PIV↗

DOE OSTI2025

Comparing approaches for introducing polycyclic aromatic hydrocarbons to Ge(001) to seed graphene nanoribbon synthesis by CH 4 chemical vapor deposition

Here, we evaluate two approaches for introducing polycyclic aromatic hydrocarbons (PAHs) to a graphene catalyst substrate as part of a two-step chemical vapor deposition (CVD) process for growing graphene nanoribbons (GNRs). In this process, PAHs first form graphene-like seeds on Ge, and then GNRs are subsequently evolved from these PAH-derived seeds via substrate-mediated anisotropic growth kinetics during the CVD of CH4. The first seeding approach sublimes controlled doses of PAH thin films into the CVD chamber, while the second delivers PAHs directly from the vapor phase at set concentrations. Using these two approaches, we measure the dependence of GNR density on PAH dose and compare the experimental results with predictions from a rate model of PAH diffusion, desorption, and clustering. We find that PAHs that more strongly adsorb to the catalyst surface (generally larger PAHs) desirably remain more individualized prior to GNR evolution whereas smaller, more weakly bound PAHs aggregate into larger clusters with various sizes on Ge that are undesirable for synthesizing more monodisperse GNRs. As a result, this work is important because it offers a framework that enables the rational selection and design of seed molecules, advancing anisotropic GNR CVD synthesis.

CVD↗

DOE OSTI2024

Evolution of PTCDA-derived seeds prior to graphene nanoribbon growth on Ge(001)

The synthesis of graphene nanoribbons (GNRs) can be realized via CH4 chemical vapor deposition (CVD) on substrates such as Ge(001) that promote highly anisotropic growth kinetics. Small polycyclic aromatic hydrocarbons (PAHs) are first sublimed onto Ge near room temperature to form graphene-like seeds that subsequently initiate GNR growth with CH4 exposure at 1173 K. The behaviors of PAHs in the time in between their sublimation onto Ge and GNR growth are unclear. Here, we study an archetypical PAH, perylene-3,4,9,10-tetracarboxyl acid dianhydride (PTCDA), on Ge(001) using both scanning tunneling microscopy (STM) and density functional theory (DFT) to characterize PAH conformation, surface diffusivity, and clustering, versus temperature. PTCDA becomes mobile above 673 K (consistent with a DFT calculated diffusion barrier of 2.01 eV). The mobile PTCDA molecules meet, cluster, and fuse at Ge step edges. These clusters have an apparent height of 0.4 nm, similar to small graphene islands, and grow laterally with increasing temperature – reaching 1.2 – 2.1 nm in width at 1173 K, consistent with the seed size extrapolated from CVD experiments. These results provide a plausible picture for how PTCDA forms seeds for anisotropic GNR CVD and show that PAHs with reduced surface diffusivity and inter-molecular reactivity are needed to enable more monodisperse PAH-seeded GNR synthesis.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Metabolic flux, metabolite, and transcript analysis uncover reprogramming of metabolism toward higher seed oil

Overexpression of WRINKLED1 (WRI1), a master regulator of glycolysis and fatty acid biosynthesis, together with DIACYLGLYCEROL ACYLTRANSFERASE1 (DGAT1), which catalyzes the final step of triacylglycerol assembly, is a promising strategy for enhancing seed oil content. However, how these regulators coordinate system-wide metabolic reprogramming at the levels of gene expression, metabolite pools, and fluxes remains poorly understood. To address this, we performed 13 C-metabolic flux analysis, metabolomics, and transcriptomics on in vitro cultured pennycress (Thlaspi arvense L.) embryos overexpressing the native WRI1 and DGAT1 homologs. Here, in cultured embryos, WRI1/DGAT1 overexpression increased triacylglycerol accumulation by 28% while reducing protein content by 34%, relative to the wild type. Embryos showed ∼20-fold and 50-fold upregulation of WRI1 and DGAT1 along with induction of WRI1 target genes in glycolysis and fatty acid biosynthesis. Genes associated with photosynthesis and Calvin cycle functions were also upregulated, whereas genes encoding ribosomal proteins and seed storage proteins were strongly repressed, consistent with the observed lipid–protein tradeoff. Flux analysis revealed that enhanced triacylglycerol biosynthesis is supported by increased flux through the Rubisco shunt and cytosolic pyruvate kinase, while the oxidative pentose phosphate pathway and malic enzyme contributed little to NADPH or pyruvate supply. Metabolomic profiling revealed extensive perturbations in glycolytic intermediates, tricarboxylic acid cycle metabolites, and amino acids. In plant grown seeds, WRI1/DGAT1 lines also showed a modest but significant increase in total lipid content. Collectively, these findings reveal how WRI1 and DGAT1 reprogram central metabolism to enhance oil accumulation, with relevance to mature seeds.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Targeted modulation of pennycress lipid droplet proteins impacts droplet morphology and seed oil content

SUMMARY Lipid droplets (LDs) are unusual organelles that have a phospholipid monolayer surface and a hydrophobic matrix. In oilseeds, this matrix is nearly always composed of triacylglycerols (TGs) for efficient storage of carbon and energy. Various proteins play a role in their assembly, stability and turnover, and even though the major structural oleosin proteins in seed LDs have been known for decades, the factors influencing LD formation and dynamics are still being uncovered mostly in the “model oilseed” Arabidopsis. Here we identified several key LD biogenesis proteins in the seeds of pennycress, a potential biofuel crop, that were correlated previously with seed oil content and characterized here for their participation in LD formation in transient expression assays and stable transgenics. One pennycress protein, the lipid droplet associated protein‐interacting protein (LDIP), was able to functionally complement the Arabidopsis ldip mutant, emphasizing the close conservation of lipid storage among these two Brassicas. Moreover, loss‐of‐function ldip mutants in pennycress exhibited increased seed oil content without compromising plant growth, raising the possibility that LDIP or other LD biogenesis factors may be suitable targets for improving yields in oilseed crops more broadly.

Guzha, Athanas↗

NASA NTRS1971

Measurements of seeded argon-hydrogen plasma properties.

Seeded argon-hydrogen plasmas have been produced at Georgia Tech in order to experimentally measure composition, temperature, radiant heat output and opacity. The plasma, seeded with submicron tungsten particles, simulates the propellant of a gaseous core nuclear rocket. These measurements are needed to predict the dynamic behavior of the operating gas core reactor. The temperature range in which the seed has vaporized but the hydrogen itself has not yet become opaque is known as the seed-hydrogen opacity window. Preliminary opacity data in this temperature range will be presented.

Benns, R. A.↗

NASA NTRS1973

Handling System for Iridium-192 Seeds

A complete system is proposed for safe handling of iridium-192 seeds used to internally irradiate malignant growths. A vibratory hopper feeds the seeds onto a transport system for deposit in a magazine or storage area. A circular magazine consisting of segmented plastic tubing with holes in the walls to accommodate the seeds seems feasible. The magazine is indexed to stop and release a seed for calibration and deposition.

Carpenter, W.↗

NASA NTRS1977

Pine seed germination under weightlessness (a study of the Kosmos 782 satellite)

Orientation of the above and underground organs of pine plants, grown from seeds under weightlessness, was found to be determined by seed position on the substrate. Normal plant growth was observed only if the seed embryos were oriented toward the substrate. Some differences were noted between the experimental and control plants concerning the amount of nucleoli in the root meristematic cells and the cell shape in cotyledonous leaves. No complete similarity was found in experimental results obtained with plants under weightlessness and under compensated gravity. The seeds were obtained from Pinus silvestris, considered to be particularly suitable for this experiment.

Platonova, R. N.↗

NASA NTRS1980

Genetic changes induced by space flight factors in barley seeds on Soyuz-5 and Soyuz-9 craft

Air-dry seeds of the barley Zimujuschij moscowskyi of the 1969 harvest were taken into space onboard the spaceships Soyuz-5 and Soyuz-9. A cytological study of the mitoses in meristemic cells in rootlet terminals revealed that space flight factors (SFF) in nonirradiated seeds induced about 3% of aberrant cells. After irradiation the effect of SFF increased over two-fold. Although the radio protectors ensured the seeds against from the SFF-induced damage either in irradiated or nonirradiated seed cells which is inconsistent with the previously obtained data.

Nuzhdin, N. I.↗

NASA NTRS1984

Arabidopsis seed production limited by CO2 in simulated space experiments

Several generations of Arabidopsis thaliana were grown axenically from seed to seed on nutrient agar medium. The Arabidopsis plants produce seeds within 30 days after seeding, when grown either in containers open to the ambient atmosphere or in large sealed jars, but not in sealed test tubes. Moreover, the plant height was directly proportional to the size of the sealed container. Periodic analyses of the CO2 levels in the sealed containers has shown a decrease during the first week, but a tenfold increase in the following weeks. It is speculated that, by the end of the second week, the cotyledons entering the senescence stage would release ethylene into the culture atmosphere with a concomitant release of CO2, which in turn would induce further release of ethylene, hastening the senescence process in other tissues. Thus, in a controlled ecological life-support system of a space station, various components of the plant atmosphere may have to be maintained within the prescribed limits.

Hoshizaki, T.↗

NASA NTRS1985

Seeding techniques used in the Vortex Research Facility

For many years, the Vortex Research Facility used kerosene vapor as seeding particles. The kerosene vapor formed (approx. 1 micron) particles initially. After injection into the test section, the vapor would begin to condense and form larger particles. By switching to solid particles, this has been eliminated. The uniform-sized (approx. 1 micron) solid particle seeding is used both to seed the Laser Velocimeter system and for flow visualization. After injection, the solid particles reach a uniform suspension before the vehicle is launched. It is found that the kerosene vapor poses a problem because it is a heated gas which modified the test section temperature distribution. It also produces high turbulence and secondary air currents because it was continually injected from the time of vehicle launch until model passage. In cases where the effects of either turbulence or the vertical temperature distribution are of interest, this hot gas injection method is unsuitable. Both types of seeding particles provide adequate flow visualization but are sensitive to vertical temperature distributions.

Satran, D. R.↗

NASA NTRS1985

Generating aerosols for laser velocimeter seeding

The laser velocimeter (LV) is a unique tool for fluid flow measurements. In such measurements, even though the fluid velocity is of primary interest, the LV signal originates from seed particles present in the fluid and the LV actually measures the velocity of these particles. Thus it is important that a sufficient number of seed particles be present in the fluid and they scatter sufficient light to produce LV signals. Also, the seed particles should follow the fluid with high fidelity. Aerodynamic diameter is the true measure of a particle's ability to follow the flow. The aerodynamic diameter of a particle is defined as the diameter of a unit density sphere with same settling velocity as the particle in question. It is affected by geometric diameter, density and shape of the particle. For LV seeding, particles with smaller aerodynamic diameter are desirable because they follow the flow more readily. On the other hand, in general, the particle's ability to scatter light increases with its geometric diameter and its refractive index.

Agarwal, J. K.↗