Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resource Size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Natural resources inventory and land evaluation in Switzerland

The author has identified the following significant results. Using MSS channels 5 and 7 and a supervised classification system with a PPD classification algorithm, it was possible to map the exact areal extent of the snow cover and of the transition zone with melting snow patches and snow free parts of various sizes over a large area under different aspects such as relief, exposure, shadows etc. A correlation of the data from ground control, areal underflights and earth resources satellites provided a very accurate interpretation of the melting procedure of snow in high mountains.

Haefner, H.↗
NASA NTRS1977

Lunar resources and their utilization

The paper reviews the physical and chemical characteristics of lunar surface materials noting the thickness of the regolith, grain size distribution, regolith petrography, and the chemical composition of the regolith. A comprehensive design of a processing system for the production of structural metals, oxygen, silicon, glass, and ceramic materials is presented. Specifications regarding the location of the processing plant, and its mass, volume, and power requirements are reviewed.

Phinney, W. C.↗
NASA NTRS2004

Bounding the Resource Availability of Partially Ordered Events with Constant Resource Impact

We compare existing techniques to bound the resource availability of partially ordered events. We first show that, contrary to intuition, two existing techniques, one due to Laborie and one due to Muscettola, are not strictly comparable in terms of the size of the search trees generated under chronological search with a fixed heuristic. We describe a generalization of these techniques called the Flow Balance Constraint to tightly bound the amount of available resource for a set of partially ordered events with piecewise constant resource impact We prove that the new technique generates smaller proof trees under chronological search with a fixed heuristic, at little increase in computational expense. We then show how to construct tighter resource bounds but at increased computational cost.

Frank, Jeremy↗
NASA NTRSDate not supplied

Improving Computational Efficiency of Prognostics Algorithms in Resource-Constrained Settings

The field of prognostics and health management provides quantitative methods for monitoring and predicting the health of physical systems. Prognostics algorithms are useful in that they can be employed to assess the current state of a system, propagate the system state throughout time, and predict potential anomalies or failures that may occur. However, effective prognosis can be challenging to achieve in resource-constrained settings due to computational limitations and high computational latency, leading to obsolete predictions. Thus, computationally efficient and accurate algorithms are necessary for some prognostics applications. In this work, we implement three new algorithmic approaches to prediction (sampling methods, variable prediction time step, variable prediction sample size) with the goal of improving computational efficiency while minimizing decrease in model accuracy. To quantitatively analyze our results, we examine a use-case of degradation of a Lithium-ion battery. Notably, through this work it was found that none of the sampling approaches had a significant impact on computational efficiency or model accuracy in predicting EOD of the battery. However, our results show that prediction accuracy is highly dependent on the time step used, and that an appropriate time step can optimize both model accuracy and simulation efficiency. Finally, implementing a variable sample size also affected prediction, and our results show that tuning both the magnitude and timing of the sample size adjustment in an application-specific manner may prove useful in some applications. Taken together, our findings highlight the challenge of performing prognostics in resource-constrained settings, and illustrate the potential of developing new prediction algorithms to improve computational efficiency of prognosis.

Prognostics↗
NASA NTRS1986

Electrical power systems for Mars

Electrical power system options for Mars Manned Modules and Mars Surface Bases were evaluated for both near-term and advanced performance potential. The power system options investigated for the Mission Modules include photovoltaics, solar thermal, nuclear reactor, and isotope power systems. Options discussed for Mars Bases include the above options with the addition of a brief discussion of open loop energy conversion of Mars resources, including utilization of wind, subsurface thermal gradients, and super oxides. Electrical power requirements for Mission Modules were estimated for three basic approaches: as a function of crew size; as a function of electric propulsion; and as a function of transmission of power from an orbiter to the surface of Mars via laser or radio frequency. Mars Base power requirements were assumed to be determined by production facilities that make resources available for follow-on missions leading to the establishment of a permanently manned Base. Requirements include the production of buffer gas and propellant production plants.

Giudici, Robert J.↗
NASA NTRS1976

A new computer approach to map mixed forest features and postprocess multispectral data

A computer technique for mapping mixed softwood and hardwood stands in multispectral satellite imagery of forest regions is described. The purpose of the technique is to obtain smoother resource maps useful in timber harvesting operations. The computer program relies on an algorithm which assesses the size and similarity of adjacent sections on satellite imagery (Landsat-1 data is used) and constructs, through an iteration of the basic algorithm, a more general map of timber mixtures, eliminating the mottled appearance of the raw imagery. Despite difficulties in the experimental analysis of a Texas forest, apparently due to relatively low resolution of the Landsat data, the computer classification approach outlined is suggested as a generally applicable method of creating serviceable maps from multispectral imagery.

Kan, E. P.↗
NASA NTRS2013

Mars Sample Return Landed with Red Dragon

A Mars Sample Return (MSR) mission is the highest priority science mission for the next decade as recommended by the recent Decadal Survey of Planetary Science. However, an affordable program to carry this out has not been defined. This paper describes a study that examined use of emerging commercial capabilities to land the sample return elements, with the goal of reducing mission cost. A team at NASA Ames examined the feasibility of the following scenario for MSR: A Falcon Heavy launcher injects a SpaceX Dragon crew capsule and trunk onto a Trans Mars Injection trajectory. The capsule is modified to carry all the hardware needed to return samples collected on Mars including a Mars Ascent Vehicle (MAV), an Earth Return Vehicle (ERV) and Sample Collection and Storage hardware. The Dragon descends to land on the surface of Mars using SuperSonic Retro Propulsion (SSRP) as described by Braun and Manning [IEEEAC paper 0076, 2005]. Samples are acquired and deliverd to the MAV by a prelanded asset, possibly the proposed 2020 rover. After samples are obtained and stored in the ERV, the MAV launches the sample-containing ERV from the surface of Mars. We examined cases where the ERV is delivered to either low Mars orbit (LMO), C3 = 0 (Mars escape), or an intermediate energy state. The ERV then provides the rest of the energy (delta V) required to perform trans-Earth injection (TEI), cruise, and insertion into a Moon-trailing Earth Orbit (MTEO). A later mission, possibly a crewed Dragon launched by a Falcon Heavy (not part of the current study) retrieves the sample container, packages the sample, and performs a controlled Earth re-entry to prevent Mars materials from accidentally contaminating Earth. The key analysis methods used in the study employed a set of parametric mass estimating relationships (MERs) and standard aerospace analysis software codes modified for the MAV class of launch vehicle to determine the range of performance parameters that produced converged spacecraft designs capable of meeting mission requirements. Subsystems modeled in this study included structures, power system, propulsion system, nose fairing, thermal insulation, actuation devices, and GN&C. Best practice application of loads and design margins for all resources were used. Both storable and cryogenic propellant systems were examined. The landed mass and lander capsule size provide boundary conditions for the MAV design and packaging. We estimated the maximum mass the Dragon capsule is capable of landing. This and the volume capability to store the MAV was deduced from publically available data from SpaceX as well as our own engineering and aerodynamic estimates. Minimum gross-liftoff mass (GLOM) for the MAV were obtained for configurations that used pump-fed storable bi-propellant rocket engines for both the MAV and the ERV stage. The GLOM required fits within our internal estimate of the mass that Dragon can land at low elevation/optimal seasons on Mars. Based on the analysis, we show that a single Mars launch sample return mission is feasible using current commercial capabilities to deliver the return spacecraft assets.

Mars Ascent Vehicle (MAV)↗
NASA NTRS2009

Proof Compression and the Mobius PCC Architecture for Embedded Devices

The EU Mobius project has been concerned with the security of Java applications, and of mobile devices such as smart phones that execute such applications. In this talk, I'll give a brief overview of the results obtained on on-device checking of various security-related program properties. I'll then describe in more detail how the concept of certified abstract interpretation and abstraction-carrying code can be applied to polyhedral-based analysis of Java byte code in order to verify properties pertaining to the usage of resources of a down-loaded application. Particular emphasis has been on finding ways of reducing the size of the certificates that accompany a piece of code.

Jensen, Thomas↗
NASA NTRS2019

The Diurnal Cycle of Precipitation and Organized Convection in a Set of Global Mesoscale Simulations with the NASA GEOS AGCM

The NASA Global Modeling and Assimilation Office (GMAO) has conducted a series of 40-day nonhydrostatic global simulations with horizontal grid spacing ranging from 200 km to 3 km, as part of the DYAMOND model intercomparison project. The Goddard Earth Observing System (GEOS) model was run with the Grell-Freitas scale-aware convection scheme, which smoothly reduces parameterized deep convection with increasing resolution. Here we evaluate the diurnal cycle and other statistics of precipitation and organized convection as a function of resolution. For validation we use the 0.1 degree IMERG precipitation and 4 km Merged IR brightness temperature datasets, focusing on four regions: the continental United States, Amazonia, the equatorial Indian ocean, and the Maritime Continent. Early results indicate good phase agreement but excessive magnitude of the continental diurnal cycle of precipitation at coarser resolutions, with improved magnitude as resolution increases and the role of parameterization is reduced. Convective cloud clusters are identified with a brightness temperature threshold, and we find realistic numbers of the largest clusters (>10^4 km sq) at all resolutions, while the number of smaller clusters increases with resolution, approaching observations when dx=3 km. The observed diurnal cycle in the cluster size distribution is also reproduced, with realistic magnitude in the highest resolution runs. Precipitation characteristics across cluster sizes are also examined. The results show the potential for global mesoscale simulations as a community science resource, and we invite collaboration to explore these runs in greater detail.

Arnold, Nathan↗
NASA NTRS1982

Some closing thoughts: Practical payoffs from satellite systems

The benefits-to-cost ratio of satellite remote sensing, both as a substitute for conventional methods of monitoring and assessing resources, and as a supplement to these methods is examined using a model which analyzes the cost of aerial photography versus satellite scanner for producing and interpreting an image of the Earth's surface sized to LANDSAT dimensions. Examples of cost savings are tabulated for ground surveys, aerial photos, and LANDSAT. Possible additional benefits from LANDSAT D are assessed. The way in which satellites fit into more comprehensive models for resources management is discussed. It is shown that remote sensing is but one essential component in a complex system that aggregates technical. Socioeconomics, political, cultural, and other factors in the human decision process.

Source record↗
NASA NTRS2010

Method and Circuit for In-Situ Health Monitoring of Solar Cells in Space

This innovation represents a method and circuit realization of a system designed to make in-situ measurements of test solar-cell operational parameters on orbit using readily available high-temperature and high-ionizing-radiation- tolerant electronic components. This innovation enables on-orbit in-situ solar-array health monitoring and is in response to a need recognized by the U.S. Air Force for future solar arrays for unmanned spacecraft. This system can also be constructed out of commercial-grade electronics and can be embedded into terrestrial solar power system as a diagnostics instrument. This innovation represents a novel approach to I-V curve measurement that is radiation and temperature hard, consumes very few system resources, is economical, and utilizes commercially available components. The circuit will also operate at temperatures as low as 55 C and up to +225 C, allowing it to reside close to the array in direct sunlight. It uses a swept mode transistor functioning as a resistive load while utilizing the solar cells themselves as the biasing device, so the size of the instrument is small and there is no danger of over-driving the cells. Further, this innovation utilizes nearly universal spacecraft bus resources and therefore can be readily adapted to any spacecraft bus allowing for ease of retrofit, or designed into new systems without requiring the addition of infrastructure. One unique characteristic of this innovation is that it effects the measurement of I-V curves without the use of large resistor arrays or active current sources normally used to characterize cells. A single transistor is used as a variable resistive load across the cell. This multi-measurement instrument was constructed using operational amplifiers, analog switches, voltage regulators, MOSFETs, resistors, and capacitors. The operational amplifiers, analog switches, and voltage regulators are silicon-on-insulator (SOI) technology known for its hardness to the effects of ionizing radiation. The SOI components used can tolerate temperatures up to 225 C, which gives plenty of thermal headroom allowing this circuit to perhaps reside in the solar cell panel itself where temperatures can reach over 100 C.

Krasowski, Michael J.↗
NASA NTRS2011

RESOLVE: Regolith and Environment Science and Oxygen and Lunar Volatile Extraction

Regolith & Environment Science and Oxygen & Lunar Volatile Extraction (RESOLVE) is an internationally developed payload that is intended to prospect for resources on other planetary bodies. RESOLVE is a miniature drilling and chemistry plant packaged onto a medium-sized rover to collect and analyze soil for volatile components such as water or hydrogen that could be used in human exploration efforts.

Quinn, Jacqueline↗
NASA NTRS2012

Virtual Machine Language 2.1

VML (Virtual Machine Language) is an advanced computing environment that allows spacecraft to operate using mechanisms ranging from simple, time-oriented sequencing to advanced, multicomponent reactive systems. VML has developed in four evolutionary stages. VML 0 is a core execution capability providing multi-threaded command execution, integer data types, and rudimentary branching. VML 1 added named parameterized procedures, extensive polymorphism, data typing, branching, looping issuance of commands using run-time parameters, and named global variables. VML 2 added for loops, data verification, telemetry reaction, and an open flight adaptation architecture. VML 2.1 contains major advances in control flow capabilities for executable state machines. On the resource requirements front, VML 2.1 features a reduced memory footprint in order to fit more capability into modestly sized flight processors, and endian-neutral data access for compatibility with Intel little-endian processors. Sequence packaging has been improved with object-oriented programming constructs and the use of implicit (rather than explicit) time tags on statements. Sequence event detection has been significantly enhanced with multi-variable waiting, which allows a sequence to detect and react to conditions defined by complex expressions with multiple global variables. This multi-variable waiting serves as the basis for implementing parallel rule checking, which in turn, makes possible executable state machines. The new state machine feature in VML 2.1 allows the creation of sophisticated autonomous reactive systems without the need to develop expensive flight software. Users specify named states and transitions, along with the truth conditions required, before taking transitions. Transitions with the same signal name allow separate state machines to coordinate actions: the conditions distributed across all state machines necessary to arm a particular signal are evaluated, and once found true, that signal is raised. The selected signal then causes all identically named transitions in all present state machines to be taken simultaneously. VML 2.1 has relevance to all potential space missions, both manned and unmanned. It was under consideration for use on Orion.

Riedel, Joseph E.↗
NASA NTRS2011

Comparing the Earth Impact Flux from Comets and Near-Earth Asteroids

Long-period comets (LPC), defined here as those active comets with orbital periods greater than 200 years, are the most difficult objects to mitigate should one be found on an Earth threatening trajectory. The arrival of these objects from the distant Oort cloud cannot be predicted and the impact warning time would be measured in a few months - not years. At the distance of Jupiter, an inactive cometary nucleus with a diameter of one kilometer and a geometric albedo equal to 0.04 would have an apparent magnitude fainter than 25 near opposition and, hence would be well outside the detection capability of current NEO search telescopes. In general LPCs do not become active, and hence discoverable, until inside the orbit of Jupiter and it takes but nine months for a LPC to travel the distance from Jupiter's orbit to that of the Earth.Estimating the impact energy for long-period comets is particularly difficult because the sizes and masses of these objects are not well known. Their solid nuclei are hidden from ground-based telescopes by their gas and dust atmospheres and even when nearby spacecraft observations can determine a size and shape for a cometary nucleus, there are no direct determinations of any cometary mass or bulk density to date. However, a variety of indirect bulk density determinations consistently provide values below one gram per cubic centimeter, the value for water. From measurements made by the Deep Impact spacecraft during its encounter with comet Tempel 1 in July 2005, the bulk density was estimated to be 0.6 grams per cubic centimeter. The mean impact velocity of a LPC is about 51 km/s, three times the 17 km/s value for a typical near-Earth asteroid (NEA) so the impact energy for an LPC would be 9 times that of a NEA of similar mass. However, the bulk density of a comet (approx. 0.6 g/cu cm) is several times less than the density of a stony NEA (approx. 2.6 g/ cu cm) so for a LPC and a stony NEA of the same size, the LPC's impact energy would be about twice that of the NEA.To properly allocate the limited resources available for NEO surveys and physical characterization, it is important to understand the relative threat from long-period comets versus the threat posed by near-Earth asteroids.

near Earth objects↗
NASA NTRS2018

Developing a Novel Platform for Characterizing Thermoelectric Materials for Uncooled Detectors for Land Imaging Applications

Thermal land imaging (imaging at ~8-14 micron optical wavelength) is an essential tool for understanding and managing terrestrial freshwater resources. Current thermal imaging instruments employ low temperature detectors, which require cryocoolers. Consequently, cost-saving reductions in size, weight, and power can be achieved by employing uncooled detectors. One uncooled detector concept, which NASA is pursuing, is a thermopile detector with sub-micron thick doped-Si thermoelectric materials. In order to characterize the thermoelectric properties of the doped silicon, we designed and optimized a novel apparatus. This simple apparatus measures the Seebeck coefficient with thermally isolated stages and LABVIEW automation. We optimized thermal stability using PID tuning and optimized the thermal contact between the thin film samples and stages using electrically conductive springs. Utilizing our apparatus, we measured the Seebeck coefficient of 0.45 micron thick phosphorus-doped single crystal Si samples bonded to alumina substrates. Using these Seebeck coefficient measurements and four-wire electrical resistivity measurements, we determined the relationship between the thermoelectric figure of merit and dopant concentration. These characterization results for doped-Si will guide our thermopile detector design to provide an optimal and competitive detector alternative for future thermal imaging instruments.

Reid, Riley A.↗
NASA NTRS2018

Probing Supraglacial Debris on Mars 1: Sources, Thickness, and Stratigraphy

Geomorphic and geophysical evidence supports a debris-covered glacier origin for a suite of landforms at themid-latitudes of Mars, including lobate debris aprons (LDA), lineated valley fill (LVF), and concentric crater fill (CCF). These large reservoirs of ice and their near-surface structure provide a rich record for understanding the planet's climate and history of global volatile exchange over the past billion years. LDA, LVF, and CCF are also potential sites for future robotic and human missions but the accessibility of glacial ice for direct sampling and in situ resource utilization depends largely on the geotechnical properties of the surface debris ("supraglacial debris"), including its thickness, grain sizes, and density structure. The physical properties of this supraglacial debris layer have been poorly constrained. We use images of morphology, digital elevation models, thermal inertia data, and radar sounding data to probe the near surface of LDA, LVF, and CCF in Deuteronilus Mensae in order to place constraints on the sources, grain sizes, thickness, and stratigraphy of supraglacial debris. We find evidence for at least a two-layer stratigraphy. Layered mantle consisting of atmospherically emplaced dust and ice superposes boulder-rich sediment sourced by rockfalls glacially transported downslope. High thermal inertia, boulder-rich termini and debris bands reminiscent of medial moraines are found throughout the study region, supporting a rockfall origin for at least a fraction of the debris exposed at the surface. This supraglacial debris layer would have thickened with time from sublimation of glacial ice and liberation of englacial sediment and dust. At present, the entire supraglacial debris package is a minimum of a few meters in thickness and is likely tens of meters in thickness in many locations, possibly thinning regionally at lower latitudes and locally thinning toward the headwalls. The lack of terracing or interior structures in craters formed within LDA, LVF, and CCF and the absence of near-surface reflectors in SHARAD radar data further suggest that no strong contrasts in

Supraglacial↗
NASA NTRS2020

Comparison of Raindrop Size Distribution between NASA’s S-Band Polarimetric Radar and Two-Dimensional Video Disdrometers

The ground-based-radar-derived raindrop size distribution (DSD) parameters—mass-weighted drop diameter Dmass and normalized intercept parameter NW—are the sole resource for direct validation of the National Aeronautics and Space Administration (NASA) Global Precipitation Measurement (GPM) mission Core Observatory satellite-based retrieved DSD. Both Dmass and NW are obtained from radar-measured reflectivity ZH and differential reflectivity ZDR through empirical relationships. This study uses existing relationships that were determined for the GPM ground validation (GV) program and directly compares the NASA S-band polarimetric radar (NPOL) observables of ZH and ZDR and derivedDmass and NW with those calculated by two-dimensional video disdrometer (2DVD). The joint NPOL and 2DVD datasets were acquired during three GPM GV field campaigns conducted in eastern Iowa, southern Appalachia, and western Washington State. The comparative study quantifies the level of agreement for ZH, ZDR, Dmass, and log(NW) at an optimum distance (15–40 km) from the radar as well as at distances greater than 60 km from radar and over mountainous terrain. Interestingly, roughly 10%–15% of the NPOL ZH–ZDR pairs were well outside the envelope of 2DVD-estimated ZH–ZDR pairs. The exclusion of these pairs improved the comparisons noticeably.

Ali Tokay↗
NASA NTRS1995

Alternative beam configuration for a Canadian Ka-band satellite system

Satellite systems operating in the Ka-band have been proposed to offer wide band personal communications services to fixed earth terminals employing small aperture antennas as well as to mobile terminals. This requirement to service a small aperture antenna leads to a satellite system utilizing small spot beams. The traditional approach is to cover the service area with uniform spot beams which have been sized to provide a given grade of service at the worst location over the service area and to place them in a honeycomb pattern. In the lower frequency bands this approach leads to a fairly uniform grade of service over the service area due to the minimal effects of rain on the signals. At Ka-band, however, the effects of rain are quite significant. Using this approach over a large service area (e.g. Canada) where the geographic distribution of rain impairment varies significantly yields an inefficient use of satellite resources to provide a uniform grade of service. An alternative approach is to cover the service area using more than one spot beam size in effect linking the spot beam size to the severity of the rain effects in a region. This paper demonstrates how for a Canadian Ka-band satellite system, that the use of two spot beam sizes can provide a more uniform grade of service across the country as well as reduce the satellite payload complexity over a design utilizing a single spot beam size.

Hindson, Daniel J.↗