Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rayleigh wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Rayleigh-Scattering-Based Measurement of 'trapped waves' in High-speed Jets

Recently reported research by others identified a system of waves in the near-exit region of high-speed jets that are different from the well-known Kelvin-Helmholtz waves. In an experimental study, Rayleigh-scattering-based measurement of density fluctuations associated with these waves was used. Simultaneously, a microphone placed near the exit of the jet measured pressure fluctuations associated with the ‘trapped waves’. The pressure fluctuations were observed as a series of peaks in the spectra. Measurements were acquired in high subsonic and under-expanded screeching supersonic flows from a 1-inch diameter convergent nozzle in a free jet facility. The Rayleigh measurement volume was translated throughout the flow field while the microphone was held fixed just outside the flow near the nozzle exit. Even though the signal-to-noise ratio for the Rayleigh data was poor, cross-correlation of density fluctuations with the microphone signal provided some insight into the propagation characteristics of the trapped waves as well as the screech component.

Rayleigh scattering↗
NASA NTRS1988

Rayleigh lidar observations of gravity wave activity in the upper stratosphere at Urbana, Ill.

During 13 nights of Rayleigh lidar measurements at Urbana, Ill. in 1984 to 1986, thirty-six quasi-monochromatic gravity waves were observed in the 35 to 50 km altitude region of the stratosphere. The characteristics of the waves are compared with other lidar and radar measurements of gravity waves and the theoretical models of wave saturation and dissipation phenomena. The measured vertical wavelengths ranged from 2 to 11.5 km and the measured vertical phase velocities ranged from 10 to 85 cm/s. The vertical wavelengths and vertical phase velocities were used to infer observed wave periods which ranged from 100 to 1000 min and horizontal wavelengths which ranged from 70 to 2000 km. Dominant wave activity was found at vertical wavelengths between 2 to 4 km and 7 to 10 km. No significant seasonal variations were evident in the observed parameters. Vertical and horizontal wavelengths showed a clear tendency to increase with wave periods, which is consistent with recent sodium lidar studies of quasi-monochromatic waves near the mesopause. An average amplitude growth length of 20.9 km for the rms wind perturbations was estimated from the data. Kinetic energy density associated with the waves decreased with height, suggesting that waves in this altitude region were subject to dissipation or saturation effects.

Gardner, C. S.↗
NASA NTRS1987

Rayleigh lidar observations of gravity wave activity in the stratosphere and lower mesosphere

Forty-two monochromatic gravity wave events were observed in the 25 to 55 km altitude region during 16 nights of Rayleigh lidar measurements at Poker Flat, Alaska and Urbana, Illinois. The measured wave parameters were compared to previous radar and lidar measurements of gravity wave activity. Vertical wavelengths, lambda(z), between 2 and 11.5 km with vertical phase velocities, c(z), between 0.1 and 1 m/s were observed. Measured values of lambda(z) and c(z) were used to infer observed wave periods, T(ob), between 50 and 1000 minutes and horizontal wavelengths, lambda(x), from 25 to 2000 km. Dominant wave activity was found at vertical wavelengths between 2 to 4 km and 7 to 10 km. No seasonal variations were evident in the observed wave parameters. Vertical and horizontal wavelengths showed a clear tendency to increase with T(ob), which is consistent with recent sodium lidar studies of monochromatic wave events near the mesopause. Measured power law relationships between the wave parameters were lambda(z) varies as T(ob) sup 0.96, lambda(x) varies as T(ob) sup 1.8, and c(z) varies as T(ob) sup -0.85. The kinetic energy calculated for the monochromatic wave events varied as k(z) sup -2, k(x) sup -1, and f(ob) sup -1.7. The atmospheric scale heights calculated for each observation date range from 6.5 to 7.6 km with a mean value of 7 km. The increase of rms wind perturbations with altitude indicated an amplitude growth length of 20.9 km. The altitude profile of kinetic energy density decreased with height, suggesting that waves in this altitude region were subject to dissipation or saturation effects.

Miller, M. S.↗
DOE OSTI2020

Different responses of the Rayleigh–Taylor type and resistive drift wave instabilities to the velocity shear

The effects of velocity shear on the unstable modes driven by the effective gravity (Rayleigh–Taylor and interchange) and resistive drift wave instabilities for inhomogeneous equilibrium fluid/plasma density are analyzed for the localized eigenmode problems. It is shown that the effect of the velocity shear drastically depends on the type of instability. Whereas the velocity shear can significantly suppress both Rayleigh–Taylor and interchange instabilities, it has only a weak impact on the growth rate of the resistive drift wave. This is directly related to the physical nature of these instabilities. For the Rayleigh–Taylor and interchange instabilities, the shear flow tilts the eddies of the stream functions, while for the resistive drift wave instability the shear flow simply shifts the eddies in the radial direction with no tilting. However, for a large velocity shear, the eigenmode solutions for resistive drift waves cease to exist.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1999

Thermocapillary Flows with Low Frequency g-Jitter

A thermocapillary parallel flow is established in a fluid filled slot with an applied temperature gradient. Low frequency jitter is imposed in arbitrary directions. Vertical jitter proves to be relatively uninteresting, merely augmenting or opposing the basic thermocapillary flow. Streamwise jitter still produces parallel flows, but these now exhibit boundary layers or layered cellular structures for large Rayleigh number as the applied stratification alternates between stable and unstable. Runaways are possible for unstable stratification and these correspond to resonant excitation of stationary long wave Rayleigh-Benard modes. Spanwise jitter produces fully three dimensional motion. A spanwise-streamwise circulation results for weak spanwise jitter, which advects the interfacial temperature establishing a subsidiary spanwise thermocapillary flow. This flow is strong at small Biot number when advected temperature is trapped in the slot, and has a counter-intuitive dependence on the spanwise-streamwise aspect ratio.

Grassia, P.↗
NASA NTRS1984

Measurements of mantle wave velocities and inversion for lateral heterogeneity and anisotropy. II - Analysis by the single-station method

In the present investigation, the single-station method reported by Brune et al. (1960) is utilized for an analysis of long-period Love(G) and Rayleigh(R) waves recorded on digital seismic networks. The analysis was conducted to study the lateral heterogeneity of surface wave velocities. The data set is examined, and a description is presented of the single-station method. Attention is given to an error analysis for velocity measurements, the estimation of geographical distribution of surface wave velocities, the global distribution of surface wave velocities, and the correlation between the surface wave velocities and the heat flow on the geoid. The conducted measurements and inversions of surface wave velocities are used as a basis to derive certain conclusions. It is found that the application of the single-station method to long-period surface waves recorded on digital networks makes it possible to reach an accuracy level comparable to great circle velocity measurements.

Nakanishi, I.↗
NASA NTRS2019

Modeling the near-field ionospheric disturbances during earthquakes

We present the latest development of the Wave Perturbation-Global Ionosphere-Thermosphere Model (WP-GITM), a threedimensional physics-based numerical model for seismic/tsunami-ionosphere coupling via atmospheric acoustic-gravity waves. WP-GITM was previously applied to simulate the ionospheric perturbations resulted from the epicentral crustal movement by assuming spherical acoustic-gravity waves originated from a point source, which was specified by the seismic measurement at a single location nearby the epicenter. In this work, we extend WP-GITM to include the effects of Rayleigh surface waves and adapt WP-GITM to utilize seismic measurements from more than one location in the attempt to capture the radiation pattern of the seismic source. We apply the new WP-GITM to model the near-field co-seismic ionospheric perturbations during the 16 September 2015 Illapel earthquake. The comparison between the simulated ionospheric total electron content perturbations and the GPS observations shows promising results.

Ravanelli, Michela↗
DOE OSTI2022

Smart quantum statistical imaging beyond the Abbe-Rayleigh criterion

The wave nature of light imposes limits on the resolution of optical imaging systems. For over a century, the Abbe-Rayleigh criterion has been utilized to assess the spatial resolution limits of imaging instruments. Recently, there has been interest in using spatial projective measurements to enhance the resolution of imaging systems. Unfortunately, these schemes require a priori information regarding the coherence properties of “unknown” light beams and impose stringent alignment conditions. Here, we introduce a smart quantum camera for superresolving imaging that exploits the self-learning features of artificial intelligence to identify the statistical fluctuations of unknown mixtures of light sources at each pixel. This is achieved through a universal quantum model that enables the design of artificial neural networks for the identification of photon fluctuations. Our protocol overcomes limitations of existing superresolution schemes based on spatial mode projections, and consequently provides alternative methods for microscopy, remote sensing, and astronomy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

On the study of hydrodynamic instabilities in the presence of background magnetic fields in high-energy-density plasmas

Blast-wave-driven hydrodynamic instabilities are studied in the presence of a background B-field through experiments and simulations in the high-energy-density (HED) physics regime. In experiments conducted at the Laboratoire pour l’utilisation des lasers intenses (LULI), a laser-driven shock-tube platform was used to generate a hydrodynamically unstable interface with a prescribed sinusoidal surface perturbation, and short-pulse x-ray radiography was used to characterize the instability growth with and without a 10-T B-field. The LULI experiments were modeled in FLASH using resistive and ideal magnetohydrodynamics (MHD), and comparing the experiments and simulations suggests that the Spitzer model implemented in FLASH is necessary and sufficient for modeling these planar systems. These results suggest insufficient amplification of the seed B-field, due to resistive diffusion, to alter the hydrodynamic behavior. Although the ideal-MHD simulations did not represent the experiments accurately, they suggest that similar HED systems with dynamic plasma-β (=2μ0ρv2/B2) values of less than ∼100 can reduce the growth of blast-wave-driven Rayleigh–Taylor instabilities. These findings validate the resistive-MHD FLASH modeling that is being used to design future experiments for studying B-field effects in HED plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Experimental flaw detection by scattering of plate waves

The surface displacements of elastic waves scattered from a surface-breaking crack are measured with a capacitive transducer on a 2D plate, and comparisons with theoretical predictions are reported. The noncontacting detector has a wide and flat frequency response which measures the response of a glass plate to the propagation of Rayleigh-Lamb waves. A theoretical simulation of the surface displacements is generated by multiplying experimental traces with a cosine window, and Green's function is used to compute the source function. Power spectra are also recorded from the experiment to compare the results with a finite-element model of the crack, and good agreement is reported for results in both the time and frequency domains. The crack can be detected in the far field when the spacing of the receiver locations is small, and the transducer/probe appears to be a practical flaw-detection instrument.

Spetzler, Hartmut↗
NASA NTRS1994

Interaction of Oblique Instability Waves with Weak Streamwise Vortices

This paper is concerned with the effect of a weak spanwise-variable mean-flow distortion on the growth of oblique instability waves in a Blasius boundary layer. The streamwise component of the distortion velocity initially grows linearly with increasing streamwise distance, reaches a maximum, and eventually decays through the action of viscosity. This decay occurs slowly and allows the distortion to destabilize the Blasius flow over a relatively large streamwise region. It is shown that even relatively weak distortions can cause certain oblique Rayleigh instability waves to grow much faster than the usual two-dimensional Tollmien-Schlichting waves that would be the dominant instability modes in the absence of the distortion. The oblique instability waves can then become large enough to interact nonlinearly within a common critical layer. It is shown that the resulting nonlinearity is weak and that the common amplitude of the interacting oblique waves is governed by the amplitude evolution equation derived in Goldstein & Choi (1989). The implications of these results for Klebanoff-type transition are discussed.

Goldstein, M. E.↗
NASA NTRS1989

Gravity wave climatology at midlatitude from Rayleigh lidar data

Atmospheric sounding of the middle atmosphere by Rayleigh scattering has been performed in France for several years, from two stations with different orographic situations: one in the Alps, the Observatoire de Haute Provence, one on the Atlantic coast at Biscarosse. The vertical profiles of density and temperature are obtained with a temporal and spatial resolution of, respectively, 15 mn and 300 m between 30 and 80 km. A statistical study of the atmospheric fluctuations due to gravity waves was performed and the main results are presented: climatology of the gravity wave activity, distribution of energy versus vertical wave number and altitude, and comparison of the observations at the two sites. Conclusions are presented on the saturation of the wave field, the filtering by the mean wind, the transfer of energy and momentum into the atmosphere.

Wilson, R.↗
DOE OSTI2021

The First Detection of an Earthquake From a Balloon Using Its Acoustic Signature

Extreme temperature and pressure conditions on the surface of Venus present formidable technological challenges against performing ground-based seismology. Efficient coupling between the Venusian atmosphere and the solid planet theoretically allows the study of seismically generated acoustic waves using balloons in the upper atmosphere, where conditions are far more clement. However, earthquake detection from a balloon has never been demonstrated. We present the first detection of an earthquake from a balloon-borne microbarometer near Ridgecrest, CA in July 2019 and include a detailed analysis of the dependence of seismic infrasound, as measured from a balloon on earthquake source parameters, topography, and crustal and atmospheric structure. Our comprehensive analysis of seismo-acoustic phenomenology demonstrates that seismic activity is detectable from a high-altitude platform on Earth, and that Rayleigh wave-induced infrasound can be used to constrain subsurface velocities, paving the way for the detection and characterization of such signals on Venus.

58 GEOSCIENCES↗
DOE OSTI2025

A generalized effective potential for differentially rotating plasmas

Global stability of differentially rotating plasma is investigated using a generalized effective potential. We first, for a current-free system, obtain a general form of an effective potential in terms of the free energies of global curvature and gradients of rotation for non-axisymmetric disturbances. We then examine the stability of differentially rotating disks for several rotation profiles and present the associated effective potential for the onset of these instabilities in the MHD regime. In particular, results for global axisymmetric magnetorotational instability as well as local and global non-axisymmetric modes are presented. The latter constitute two distinct non-axisymmetric modes, a high frequency local MRI and a global low-frequency non-axisymmetric mode (the magneto-curvature mode, introduced in Ebrahimi and Pharr [Astrophys. J. 936, 145 (2022)]), confined either between two Alfvénic resonances or an Alfvénic resonance and a boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Nonlinear ultrasonic technique for the characterization of microstructure in additive materials

This study employs nonlinear ultrasonic techniques to track microstructural changes in additively manufactured metals. The second harmonic generation technique based on the transmission of Rayleigh surface waves is used to measure the acoustic nonlinearity parameter, β. Stainless steel specimens are made through three procedures: traditional wrought manufacturing, laser-powder bed fusion, and laser engineered net shaping. The β parameter is measured through successive steps of an annealing heat treatment intended to decrease dislocation density. Dislocation density is known to be sensitive to manufacturing variables. In agreement with fundamental material models for the dislocation-acoustic nonlinearity relationship in the second harmonic generation, β drops in each specimen throughout the heat treatment before recrystallization. Geometrically necessary dislocations (GNDs) are measured from electron back-scatter diffraction as a quantitative indicator of dislocations; average GND density and β are found to have a statistical correlation coefficient of 0.852 showing the sensitivity of β to dislocations in additively manufactured metals. Moreover, β shows an excellent correlation with hardness, which is a measure of the macroscopic effect of dislocations.

42 ENGINEERING↗
DOE OSTI2025

Designing Yield Grids for Airborne Nuclear Explosions to Maintain Decrements in Rayleigh Waveform Amplitudes

This document details a method for selecting grid points that sample the yields of airborne, low yield nuclear explosions that constrains the relative size of seismic waveforms sourced by explosions that are parameterized by this grid. In detail, we impose this constraint so that the vertical component of ground displacement that is sourced by explosions with a fixed height of burst (HoB) at grid point k change by a fixed factor of a when compared to the waveform amplitudes sourced by explosions at grid point k + 1, as observed at a fixed standoff distance. This gridding thereby preserves amplitude ratios along the grid so that they are agnostic to k. We assert that this method is useful in tests that apply algorithms against synthetic or augmented datasets for which the performance of the algorithm must be measured against source size, and waveform amplitudes must change uniformly (e.g., Berg et al, 2025).

58 GEOSCIENCES↗
NASA NTRS1986

Residual stress measurements in carbon steel

External dc magnetic field-induced changes in natural velocity of Rayleigh surface waves were measured in steel specimens under various stress conditions. The low field slopes of curves representing the fractional changes of natural velocity were proved to provide correct stress information in steels with different metallurgical properties. The slopes of curves under uniaxial compression, exceeding about one third of the yield stress, fell below zero in all the specimens when magnetized along the stress axis. The slopes under tension varied among different steels but remained positive in any circumstances. The stress effect was observed for both applied and residual stress. A physical interpretation of these results is given based on the stress-induced domain structure changes and the delta epsilon effect. Most importantly, it is found that the influence of detailed metallurgical properties cause only secondary effects on the obtained stress information.

Heyman, J. S.↗