Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROSE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Effective Source-to-Source Outlining to Support Whole Program Empirical Optimization

Although automated empirical performance optimization and tuning is well-studied for kernels and domain-specific libraries, a current research grand challenge is how to extend these methodologies and tools to significantly larger sequential and parallel applications. In this context, we present the ROSE source-to-source outliner, which addresses the problem of extracting tunable kernels out of whole programs, thereby helping to convert the challenging whole-program tuning problem into a set of more manageable kernel tuning tasks. Our outliner aims to handle large scale C/C++, Fortran and OpenMP applications. A set of program analysis and transformation techniques are utilized to enhance the portability, scalability, and interoperability of source-to-source outlining. More importantly, the generated kernels preserve performance characteristics of tuning targets and can be easily handled by other tools. Preliminary evaluations have shown that the ROSE outliner serves as a key component within an end-to-end empirical optimization system and enables a wide range of sequential and parallel optimization opportunities.

99 GENERAL AND MISCELLANEOUS↗

Time-resolved targeted metabolomics shows an abrupt switch from Calvin-Benson-Bassham cycle to tricarboxylic acid cycle when the light is turned off

Abstract In leaves, major CO₂ fluxes alternate between fixation by the Calvin-Benson-Bassham (CBB) cycle during light and release by the tricarboxylic acid (TCA) cycle in darkness. The speed at which leaf metabolism transitions between these pathways likely influences plant tolerance to fluctuating light conditions. To investigate these rapid metabolic shifts, we exposed leaves to ¹³CO₂ for 20 min to establish a quasi-steady state before abruptly turning off the light while maintaining ¹³CO₂ feeding. Within 10 s of dark transition, 3-phosphoglycerate levels rose significantly while most other CBB cycle intermediates decreased by more than 90%. Simultaneously, carbon accumulated in alanine, likely via pyruvate. Over the subsequent 10 min, six- and five-carbon TCA cycle intermediates steadily increased. In contrast, four-carbon TCA intermediates peaked at one minute, declined at three minutes, and rose again at 10 min, a pattern mirrored by most measured amino acids. These results reveal an exceptionally rapid metabolic reconfiguration from CO₂ fixation by the CBB cycle in light to TCA cycle activation for energy production in darkness, accompanied by substantial changes in amino acid metabolism.

Plant Sciences↗

Oxidative Deboronation of Boronic Acids by Hydrogen Peroxide in Planta Generates Borate for Cross-Linking of Rhamnogalacturonan II

Vascular plants require boron to cross-link the rhamnogalacturonan-II (RG-II) domain of pectin to form functional cell walls. Boronic acids, which form reversible esters with cis-diols like borate, have been proposed to influence RG-II cross-linking, though the mechanism remains unclear. We used suspension-cultured rose cells adapted to grow without boron to investigate the effect of boronic acids on RG-II dimerization. When grown with phenylboronic acid (PBA) as the sole boron source, nearly all RG-II was crosslinked, whereas methylboronic acid (MBA) only partially restored cross-linking. In contrast, in vitro assays showed that homogeneous RG-II monomers did not dimerize with alkyl or aryl boronic acids unless supplemented with hydrogen peroxide (H2O2), which oxidatively converts boronic acids to boric acid. Real-time NMR spectroscopy and density functional theory calculations provided insight into the reaction mechanism and energetics of oxidation respectively. Together, our data show that exogenous boronic acids are a source of boric acid for plants, and that the deboronation reaction generates aryl or alkyl alcohol byproducts that can undergo further chemical modification in planta. The fate and potential roles of these byproducts in planta remain to be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

National and subnational mortality and disability-adjusted life years (DALYs) attributable to 17 occupational risk factors in Iran, 1990–2015

Highlights: • Mortality and morbidity from 17 occupational risks in Iran, 1990–2015 were estimated. • During 1990–2015, national DALYs from occupational risks increased by 65%. • During 1990–2015, the share of women in the attributable DALYs rose from 13% to 20%. • Proportion of YLLs in national DALYs due to occupational risks in 2015 was 23%. • Spatial inequality in the attributable DALY rate decreased from 1990 to 2015. We estimated age-sex specific and cause-specific mortality, years of life lost due to premature mortality (YLLs), years lived with disability (YLDs) and disability-adjusted life years (DALYs) attributable to 17 individual occupational risks in Iran at the national and subnational levels in 1990–2015 based on the Global Burden of Disease Study 2015 (GBD 2015). The burden of disease attributable to occupational risk factors was calculated using the comparative risk assessment methodology based on 10 outcomes and 21 risk-outcome pairs. The temporal changes in the attributable burden of disease were decomposed into the contribution of population growth, population ageing, risk-deleted DALY rate, and risk exposure. National DALYs attributable to occupational risks at the national level in 1990, 2005, and 2015 were 138,210 (95% uncertainty interval 64,429–223,028), 193,243 (91,645–310,281), and 228,310 (106,782–371,709), respectively indicating a total increase of 65% (65–67) during the study period. Between 1990 and 2015, the share of the attributable DALYs for women rose by 55% (51–58) from 13% (12–14) to 20% (19–21). The proportion of YLLs in national DALYs attributable to occupational risks during the study period slightly decreased from 24% in 1990 to 23% in 2015. The five occupational risks with the highest contributions in the national attributable DALYs in 2015 were ergonomic factors (107,490), noise (52,122), exposure to particulate matter, gases, and fumes (26,847), asthmagens (19,347), and exposure to asbestos (7842). From 1990 to 2015, the increase in total DALYs attributable to occupational carcinogens (112%) was higher than that for other occupational risks. During the study period, changes in risk deleted DALY rate and risk exposure led to decreases in total DALYs attributable to occupational risks by 14% and 30%, respectively. Based on the Gini coefficient, spatial inequality in DALY rate attributable to occupational risks at the provincial level decreased during 1990–2015. A comprehensive plan for management of exposure to occupational risks, especially occupational carcinogens can cause an important effect for control of the increasing trend of occupational health losses.

54 ENVIRONMENTAL SCIENCES↗

Impact of coolant temperature on the combustion characteristics and emissions of a stratified-charge direct-injection spark-ignition engine fueled with E30

The direct injection spark ignition (DISI) engine has received considerable attention due to its potential to increase the power density of traditional spark ignition engines while significantly improving fuel economy through lean, unthrottled combustion. However, the market introduction of DISI engines operated in a lean combustion mode is inhibited by their unsatisfactory emissions, especially during cold start conditions that make proper mixture formation more challenging. Ethanol-blended gasoline, now a widely used fuel, makes the cold start of a DISI engine more difficult, leading to higher HC and soot emissions because of the high latent heat of vaporization of ethanol relative to gasoline. This work investigated the impact of coolant temperature on the characteristics of combustion and emissions in a stratified-charge DISI engine fueled with an E30 fuel (i.e. 30% ethanol in gasoline), while the coolant temperature was alternated between four levels (45, 60, 75, and 90 °C) to simulate different conditions throughout the warm-up process. The experiments showed that the coolant temperature affected the post-spark inflammation time, as well as the speed, intensity, and stability of the combustion process in the engine. When the coolant temperature rose, the engine produced more NOX and less CO, PM and HC. In addition, high-speed direct photography was used to obtain crank-angle resolved images of fuel sprays and flames in the cylinder. As the coolant temperature rose, the liquid spray lengths became shorter, reducing the possibility of wall wetting, and reduced irradiance from soot particles also indicated less nonpremixed combustion. The in-cylinder imaging results are consistent with the observed combustion and emission characteristics and shed light on the underlying processes. Finally, some potential solutions to the emissions challenges faced here could be either raising in-cylinder temperatures by using trapped residuals or modifying the injection schedule, for example by increasing the number of injections or to inject later in the cycle into a higher-density environment.

42 ENGINEERING↗

Predictors of IMRT and Conformal Radiotherapy Use in Head and Neck Squamous Cell Carcinoma: A SEER-Medicare Analysis

Purpose: The extent to which new techniques for the delivery of radiotherapy for head and neck squamous cell carcinoma (HNSCC) have diffused into clinical practice is unclear, including the use of 3-dimensional conformal RT (3D-RT) and intensity-modulated radiation therapy (IMRT). Methods and Materials: Using the Surveillance, Epidemiology, and End Results (SEER)-Medicare linked database, we identified 2,495 Medicare patients with Stage I-IVB HNSCC diagnosed at age 65 years or older between 2000 and 2005 and treated with either definitive (80%) or adjuvant (20%) radiotherapy. Our primary aim was to analyze the trends and predictors of IMRT use over this time, and the secondary aim was a similar description of the trends and predictors of conformal radiotherapy (CRT) use, defined as treatment with either 3D-RT or IMRT. Results: Three hundred sixty-four (15%) patients were treated with IMRT, and 1,190 patients (48%) were treated with 3D-RT. Claims for IMRT and CRT rose from 0% to 33% and 39% to 86%, respectively, between 2000 and 2005. On multivariable analysis, IMRT use was associated with SEER region (West 18%; Northeast 11%; South 12%; Midwest 13%), advanced stage (advanced, 21%; early, 9%), non-larynx site (non-larynx, 23%; larynx, 7%), higher median census tract income (highest vs. lowest quartile, 18% vs. 10%), treatment year (2003-2005, 31%; 2000-2002, 6%), use of chemotherapy (26% with; 9% without), and higher radiation oncologist treatment volume (highest vs. lowest tertile, 23% vs. 8%). With CRT as the outcome, only SEER region, treatment year, use of chemotherapy, and increasing radiation oncologist HNSCC volume were significant on multivariable analysis. Conclusions: The use of IMRT and CRT by Medicare beneficiaries with HNSCC rose significantly between 2000 and 2005 and was associated with both clinical and non-clinical factors, with treatment era and radiation oncologist HNSCC treatment volume serving as the strongest predictors of IMRT use.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The effect of cisplatin on the nanoscale structure of aqueous PEO–PPO–PEO micelles of varying hydrophilicity observed using SAXS

Aqueous solutions of polyethylene oxide–polypropylene oxide–polyethylene oxide (PEO–PPO–PEO) copolymers form micelles and cubic lattices as their temperature is raised. The presence of added solutes within the dispersions can also affect the kinetics of structure formation. In this work, we investigate the structures formed in the amphiphiles P104, P105, and F108 solutions at 31% mass per v both neat and co-formulated with the drug cisplatin (0.02% to 0.1% mass per v) using small-angle X-ray scattering. P104 formed BCC colloidal crystals while P105 and F108 formed FCC structures. Cisplatin had a minor influence of the formation and stability of the crystals during these thermal excursions. The largest interaction between the amphiphiles and cisplatin was P104 where there was a 2% reduction in the BCC lattice parameter of P104 as cisplatin loading rose to 0.1% at 28 °C. The F108 unit cell swelled ~2% upon cisplatin loading of 0.1%. A progressive evolution and breakdown of these structures was noted as the temperature rose from 10 °C to 35 °C. For the different amphiphiles, crystal thermal expansion coefficients of ~1 × 10 –2 °C –1 were determined in neat and loaded amphiphiles with cisplatin and all the crystals swelled with increasing temperature.

36 MATERIALS SCIENCE↗

Evolution of the stimulated Raman scattering instability in two-dimensional particle-in-cell simulations

In the following work, we analyze one-dimensional (1D) and two-dimensional (2D) full particle-in-cell simulations of stimulated Raman scattering (SRS) and study the evolution of Langmuir waves (LWs) in the kinetic regime. It is found that SRS reflectivity becomes random due to a nonlinear frequency shift and that the transverse modulations of LWs are induced by (i) the Weibel instability due to the current of trapped particles and (ii) the trapped particle modulational instability (TPMI) [H. Rose, Phys. Plasmas 12, 12318 (2005)]. Comparisons between 1D and 2D cases indicate that the nonlinear frequency shift is responsible for the first saturation of SRS. After this transient interval of first saturation, 2D effects become important: a strong side-scattering of the light, caused by these transverse modulations of the LW and the presence of a nonlinear frequency shift, is observed together with a strong transverse diffusion. This leads to an increase of the Landau damping rate of the LW, contributing to the limiting of Raman backscattering. A model is developed that reproduces the transverse evolution of the magnetic field due to trapped particles. Based on a simple 1D hydrodynamic model, the growth rate for the Weibel instability of the transverse electrostatic mode and magnetic field is estimated and found to be close to the TPMI growth rate [H. Rose et al., Phys. Plasmas 15, 042311 (2008)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

How to induce multiple delays in coupled chaotic oscillators?

Lag synchronization is a basic phenomenon in mismatched coupled systems, delay coupled systems, and time-delayed systems. It is characterized by a lag configuration that identifies a unique time shift between all pairs of similar state variables of the coupled systems. In this report, an attempt is made how to induce multiple lag configurations in coupled systems when different pairs of state variables attain different time shift. A design of coupling is presented to realize this multiple lag synchronization. Numerical illustration is given using examples of the Rössler system and the slow-fast Hindmarsh-Rose neuron model. The multiple lag scenario is physically realized in an electronic circuit of two Sprott systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The role of oxygen in the uptake of deuterium in lithiated graphite

We investigate the mechanism of deuterium retention by lithiated graphite and its relationship to the oxygen concentration through surface sensitive experiments and atomistic simulations. Deposition of lithium on graphite yielded 5%–8% oxygen surface concentration and when subsequently irradiated with D ions at energies between 500 and 1000 eV/amu and fluences over 10{sup 16} cm{sup −2} the oxygen concentration rose to between 25% and 40%. These enhanced oxygen levels were reached in a few seconds compared to about 300 h when the lithiated graphite was allowed to adsorb oxygen from the ambient environment under equilibrium conditions. Irradiating graphite without lithium deposition, however, resulted in complete removal of oxygen to levels below the detection limit of XPS (e.g., <1%). These findings confirm the predictions of atomistic simulations, which had concluded that oxygen was the primary component for the enhanced hydrogen retention chemistry on the lithiated graphite surface.

36 MATERIALS SCIENCE↗

Effect of feature size on dielectric nonlinearity of patterned PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} films

Lead zirconate titanate, PZT (52/48), thin films with a PbTiO{sub 3} seed layer were patterned into features of different widths, including various sizes of squares and 100 μm, 50 μm, and 10 μm serpentine designs, using argon ion beam milling. Patterns with different surface area/perimeter ratios were used to study the relative importance of damage produced by the patterning. It was found that as the pattern dimensions decreased, the remanent polarization increased, presumably due to the fact that the dipoles near the feature perimeter are not as severely clamped to the substrate. This investigation is in agreement with a model in which clamping produces deep wells, which do not allow some fraction of the spontaneous polarization to switch at high field. The domain wall mobility at modest electric fields was investigated using the Rayleigh law. Both the reversible, ε{sub init}, and irreversible, α, Rayleigh coefficients increased with decreasing serpentine line width for de-aged samples. For measurements made immediately after annealing, ε{sub init} of 500 μm square patterns was 1510 ± 13; with decreasing serpentine line width, ε{sub init} rose from 1520 ± 10 for the 100 μm serpentine to 1568 ± 23 for the 10 μm serpentine. The irreversible parameter, α, for the square patterns was 39.4 ± 3.2 cm/kV and it increased to 44.1 ± 3.2 cm/kV as the lateral dimension is reduced. However, it was found that as the width of the serpentine features decreased, the aging rate rose. These observations are consistent with a model in which sidewall damage produces shallow wells that lower the Rayleigh constants of aged samples at small fields. These shallow wells can be overcome by the large fields used to measure the remanent polarization and the large unipolar electric fields typically used to drive thin film piezoelectric actuators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implementation of compound refractive lenses for large field-of-view x-ray phase-contrast imaging during hypervelocity impact experiments

Synchrotron x-ray phase-contrast imaging (XPCI) offers time-resolved visualization of dynamic compression phenomena, but its intrinsically small field-of-view (FOV) limits the time that key features remain in frame. A novel approach to enlarge the FOV is achieved by positioning a two-dimensional parabolic compound refractive lens (CRL) upstream of the sample to deliberately defocus the white beam. Ray-tracing simulations and XPCI measurements show that this CRL configuration can expand the beam by ∼50% vertically and ∼15% horizontally based on the full width at half-maximum of the beam. Implementing the CRL, however, attenuates the photon flux and lowers signal-to-noise ratio (SNR). Task-based analysis using a calibration grid (30 μm dots) showed that both setups fail to consistently meet the Rose criterion (SNR ≥ 5) for features of this size in single-bunch imaging. Extrapolating the measured SNR Rose values suggests that the minimum consistently detectable feature lies closer to 30–40 μm for the standard XPCI setup and above 40 μm for CRL-XPCI. Despite this limitation, the CRL configuration nearly doubles the illuminated area, enabling simultaneous tracking of front and rear observations of boron carbide targets subjected to rod and sphere impacts at 1.0–2.6 km/s. Image tracking algorithms and photonic Doppler velocimetry were used to measure penetration and rear-surface velocity histories. Together, these measurements capture crack fronts, penetration, and material breakout, offering new benchmark data for validating high-strain-rate constitutive models of ceramic materials.

Ceramic materials↗

DYNAMICS OF A SOLAR PROMINENCE TORNADO OBSERVED BY SDO/AIA ON 2012 NOVEMBER 7–8

We study the detailed dynamics of a solar prominence tornado using time series of 171, 304, 193, and 211 Å spectral lines obtained by the Solar Dynamics Observatory/Atmospheric Imaging Assembly during 2012 November 7–8. The tornado first appeared at 08:00 UT, November 07, near the surface, gradually rose upwards with the mean speed of ∼1.5 km s{sup −1} and persisted over 30 hr. Time–distance plots show two patterns of quasi-periodic transverse displacements of the tornado axis with periods of 40 and 50 minutes at different phases of the tornado evolution. The first pattern occurred during the rising phase and can be explained by the upward motion of the twisted tornado. The second pattern occurred during the later stage of evolution when the tornado already stopped rising and could be caused either by MHD kink waves in the tornado or by the rotation of two tornado threads around a common axis. The later hypothesis is supported by the fact that the tornado sometimes showed a double structure during the quasi-periodic phase. 211 and 193 Å spectral lines show a coronal cavity above the prominence/tornado, which started expansion at ∼13:00 UT and continuously rose above the solar limb. The tornado finally became unstable and erupted together with the corresponding prominence as coronal mass ejection (CME) at 15:00 UT, November 08. The final stage of the evolution of the cavity and the tornado-related prominence resembles the magnetic breakout model. On the other hand, the kink instability may destabilize the twisted tornado, and consequently prominence tornadoes can be used as precursors for CMEs.

79 ASTRONOMY AND ASTROPHYSICS↗

A peculiar multiwavelength flare in the blazar 3C 454.3

The blazar 3C 454.3 exhibited a strong flare seen in γ-rays, X-rays and optical/near-infrared bands during 2009 December 3–12. Emission in the V and J bands rose more gradually than did the γ-rays and soft X-rays, though all peaked at nearly the same time. Optical polarization measurements showed dramatic changes during the flare, with a strong anticorrelation between optical flux and degree of polarization (which rose from ~3 to ~20 percent) during the declining phase of the flare. The flare was accompanied by large rapid swings in polarization angle of ~170°. This combination of behaviours appears to be unique. We have cm-band radio data during the same period but they show no correlation with variations at higher frequencies. Such peculiar behaviour may be explained using jet models incorporating fully relativistic effects with a dominant source region moving along a helical path or by a shock-in-jet model incorporating three-dimensional radiation transfer if there is a dominant helical magnetic field. We find that spectral energy distributions at different times during the flare can be fit using modified one-zone models where only the magnetic field strength and particle break frequencies and normalizations need change. An optical spectrum taken at nearly the same time provides an estimate for the central black hole mass of ~2.3 × 10 9 M ⊙ . Furthermore, we also consider two weaker flares seen during the ~200 d span over which multiband data are available. In one of them, the V and J bands appear to lead the γ-ray and X-ray bands by a few days; in the other, all variations are simultaneous.

79 ASTRONOMY AND ASTROPHYSICS↗

Associative memory in phasing neuron networks

We studied pattern formation in a network of coupled Hindmarsh-Rose model neurons and introduced a new model for associative memory retrieval using networks of Kuramoto oscillators. Hindmarsh-Rose Neural Networks can exhibit a rich set of collective dynamics that can be controlled by their connectivity. Specifically, we showed an instance of Hebb's rule where spiking was correlated with network topology. Based on this, we presented a simple model of associative memory in coupled phase oscillators.

Nair, Niketh↗

Factors for conversion between human and automatic read-outs of CDMAM images

Purpose: According to the European protocol for the quality control of the physical and technical aspects of mammography screening (EPQCM) image quality of digital mammography devices has to be assessed using human evaluation of the CDMAM contrast-detail phantom. This is accomplished by the determination of threshold thicknesses of gold disks with different diameters (0.08-2 mm) and revealed to be very time consuming. Therefore a software solution based on a nonprewhitening matched filter (NPW) model was developed at University of Nijmegen. Factors for the conversion from automatic to human readouts have been determined by Young et al.[Proc. SPIE 614206, 1-13 (2006) and Proc. SPIE 6913, 69131C1 (2008)] using a huge amount of data of both human and automatic readouts. These factors depend on the observer groups and are purely phenomenological. The authors present an alternative approach to determine the factors by using the Rose observer model. Methods: Their method uses the Rose theory which gives a relationship between threshold contrast, diameter of the object and number of incident photons. To estimate the conversion factors for the five diameters from 0.2 to 0.5 mm they exposed with five different current-time products which resulted in 25 equations with five unknowns. Results: The theoretical conversion factors (in dependence of the diameters) amounted to be 1.61 {+-} 0.02 (0.2 mm diameter), 1.67 {+-} 0.02 (0.25 mm), 1.85 {+-} 0.02 (0.31 mm), 2.09 {+-} 0.02 (0.4 mm), and 2.28 {+-} 0.02 (0.5 mm). The corresponding phenomenological factors found in literature are 1.74 (0.2 mm), 1.78 (0.25 mm), 1.83 (0.31 mm), 1.88 (0.4 mm), and 1.93 (0.5 mm). Conclusions: They transferred the problem of determining the factors to a well known observer model which has been examined for many years and is also well established. This method reveals to be reproduceable and produces factors comparable to the phenomenological ones.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SU-E-I-65: The Joint Commission's Requirements for Annual Diagnostic Physics Testing of Nuclear Medicine Equipment, and a Clinically Relevant Methodology for Testing Low-Contrast Resolution

Purpose: To introduce the Joint Commission's requirements for annual diagnostic physics testing of all nuclear medicine equipment, effective 7/1/2014, and to highlight an acceptable methodology for testing lowcontrast resolution of the nuclear medicine imaging system. Methods: The Joint Commission's required diagnostic physics evaluations are to be conducted for all of the image types produced clinically by each scanner. Other accrediting bodies, such as the ACR and the IAC, have similar imaging metrics, but do not emphasize testing low-contrast resolution as it relates clinically. The proposed method for testing low contrast resolution introduces quantitative metrics that are clinically relevant. The acquisition protocol and calculation of contrast levels will utilize a modified version of the protocol defined in AAPM Report #52. Results: Using the Rose criterion for lesion detection with a SNRpixel = 4.335 and a CNRlesion = 4, the minimum contrast levels for 25.4 mm and 31.8 mm cold spheres were calculated to be 0.317 and 0.283, respectively. These contrast levels are the minimum threshold that must be attained to guard against false positive lesion detection. Conclusion: Low contrast resolution, or detectability, can be properly tested in a manner that is clinically relevant by measuring the contrast level of cold spheres within a Jaszczak phantom using pixel values within ROI's placed in the background and cold sphere regions. The measured contrast levels are then compared to a minimum threshold calculated using the Rose criterion and a CNRlesion = 4. The measured contrast levels must either meet or exceed this minimum threshold to prove acceptable lesion detectability. This research and development activity was performed by the authors while employed at West Physics Consulting, LLC. It is presented with the consent of West Physics, which has authorized the dissemination of the information and/or techniques described in the work.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SU-E-I-45: Feasibility for Using Iodine Quantification to Assist Diagnosis in Dual Energy Contrast-Enhanced Digital Mammography

Purpose: The objective of this study is to develop quantitative calibration between image quality indexes and iodine concentration with dual-energy (DE) contrast-enhanced digital mammography (CEDM) techniques and further serve as the assistance for diagnosis. Methods: Custom-made acrylic phantom with dimensions of 24×30 cm{sup 2} simulated breast thickness from 2 to 6 cm was used in the calibration. The phantom contained matrix of four times four holes of 3 mm deep with a diameter of 15 mm for filling contrast agent with area density ranged from 0.1 to 10 mg/cm{sup 2}. All the image acquisitions were performed on a full-field digital mammography system (Senographe Essential, GE) with dual energy acquisitions. Mean pixel value (MPV), and contrast-to-noise ratio (CNR) were used for evaluating the relationship between image quality indexes and iodine concentration. Iodine map and CNR map could further be constructed with these calibration curves applied pixel by pixel utilized MATLAB software. Minimum iodine concentration could also be calculated with the visibility threshold of CNR=5 according the Rose model. Results: When evaluating the DE subtraction images, MPV increased linearly as the iodine concentration increased with all the phantom thickness surveyed (R{sup 2} between 0.989 and 0.992). Lesions with increased iodine uptake could thus be enhanced in the color-encoded iodine maps, and the mean iodine concentration could be obtained through the ROI measurements. As for investigating CNR performance, linear relationships were also shown between the iodine concentration and CNR (R{sup 2} between 0.983 and 0.990). Minimum iodine area density of 1.45, 1.73, 1.80, 1.73 and 1.72 mg/cm{sup 2} for phantom thickness of 2, 3, 4, 5, 6 cm were calculated based on Rose’s visualization criteria. Conclusion: Quantitative calibration between image quality indexes and iodine concentrations may further serving as the assistance for analyzing contrast enhancement for patient participating the dual energy CEDM procedures.

60 APPLIED LIFE SCIENCES↗