Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Structural design utilizing updated, approximate sensitivity derivatives

A method to improve the computational efficiency of structural optimization algorithms is investigated. In this method, the calculations of 'exact' sensitivity derivatives of constraint functions are performed only at selected iterations during the optimization process. The sensitivity derivatives utilized within other iterations are approximate derivatives which are calculated using an inexpensive derivative update formula. Optimization results are presented for an analytic optimization problem (i.e., one having simple polynomial expressions for the objective and constraint functions) and for two structural optimization problems. The structural optimization results indicate that up to a factor of three improvement in computation time is possible when using the updated sensitivity derivatives.

Scotti, Stephen J.↗
DOE OSTI2025

Searching for Neutrino Tridents in the NOvA Near Detector

This dissertation presents a search for neutrino trident production in the NOvA near detector through the coherent ``dimuon" channel: $\nu_\mu +\hspace{1pt}\text{X} \rightarrow \nu_\mu + \mu^- + \mu^+ +\hspace{1pt}\text{X}$. Trident production is a rare, purely electroweak process with sensitivity to physics beyond the Standard Model. The theoretical background, motivation for studying the process, and previous experimental measurements are reviewed. The analysis uses data collected by the NOvA near detector (ND) from Fermilab's Neutrinos at the Main Injector (NuMI) beam between November 2014 and February 2024, corresponding to an exposure of $25.5\times 10^{20}$ protons on target. The ND is a segmented tracking calorimeter located 800~m from the beam target, receiving neutrinos with a mean energy of 2~GeV. A multi-pass background reduction strategy is implemented, including the development of a novel dimuon-specific tracking technique. Trident candidates are identified using a boost ed decision tree classifier trained on simulated signal and background events. Limited background Monte Carlo statistics necessitate the use of functional fits to sideband data, which are extrapolated to estimate backgrounds in the signal region. The unblinded data contain 9 trident-like events, with an estimated background of 5.66 $\pm$ 5.15 events. This yields a best fit estimate of 3.34 tridents compared to the Standard Model prediction of 4.66. A profiled Feldman-Cousins method is used to determine a 90\% confidence interval of [0,9.1] on the number of signal events, corresponding to an upper limit of 1.95$\times$ the Standard Model prediction. This result represents the lowest energy search for trident events to date, and the first experimental contribution to the process in 27 years.

Bowles, Reed Scott [Indiana U.]↗
DOE OSTI2025

Editorial: Applications of spectroscopy and chemometrics in nuclear materials analysis

Optical analysis techniques, including spectroscopy and image analysis, have many advantages when applied to the study of nuclear materials. They require small sample sizes, can be performed remotely, and can be proceduralized through consistent practice. Most importantly, they provide a wealth of information by generating multivariate data. For example, ultraviolet–visible–near-infrared absorbance spectroscopy of actinides in aqueous and organic solutions is dependent on the oxidation state, anionic complexation, and temperature. These variables are important for solution-based separation processes, and sensitivity to these factors, combined with online monitoring, can drive the efficiency and control of these processes. The morphology and chemical composition of actinide particles can also provide a vital clue to the mechanisms by which the particles were formed, providing forensic information on the origins of the particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1995

Combustion and structure formation in SHS processes under microgravity conditions: SHS plans for microgravity experiments

This paper outlines ISMAN suggestions for the joint NASA-RSA project 'Combustion and Structure formation in SHS Processes under Microgravity Conditions'. The basic ideas of this work naturally follow from our almost 30-year experience in the field of SHS. As a matter of fact, we have already obtained some results in the following two directions closely related to the microgravity problem. One is the studies on SHS processes in the field of centrifugal forces. These studies aimed at the intensification of gravity-sensitive SHS processes in multicomponent highly caloric systems forming melts at high overloads (up to 2000 g). In other words, these studies had the objectives that are inverse to those in the microgravity studies. The second group of results directly relates to the microgravity problem and the project under consideration. These experiments played the important role in establishing links between SHS and microgravity.

Merzhanov, A. G.↗
DOE OSTI2023

Atomic masses with machine learning for the astrophysical r process

The astrophysical r process plays a vital role in the production of heavy elements. Modeling of the r process is sensitive to masses and further requires knowledge of masses beyond current experimental reach. Therefore, simulations of the r process offer a unique test bed for predicting mass extrapolations. We take a Machine-Learning (ML) approach to model the masses across the entire chart of nuclides. For the first time, we simulate r-process nucleosynthesis with a physics-based ML mass model. We compare simulated abundances to solar data in order to evaluate the model's performance far from stability. The resulting r-process abundances up to thorium and uranium qualitatively match those of the observed solar system abundance pattern, with the characteristic peaks well positioned. We propagate the mass uncertainties obtained from the ML model to r-process abundance yields to estimate an uncertainty band associated with our approach. The size of the uncertainty band is approximately one order of magnitude which aligns with the uncertainty reported using alternative techniques.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRSDate not supplied

Additive Manufacture of Refractory Metals for Aerospace Applications

High temperature refractory metals are required for a number of high temperature propulsion applications. Refractory metals are expensive, difficult to manufacture with high buy-to-fly ratios, and few vendors. Additive manufacture (AM) is used to produce C103, Molybdenum (Mo), and Tungsten (W) reaction chamber and thrust stand-off as well as Iridium ultra-fine lattice catalysts for integration into 1 N green propulsion thrusters. Refractory AM is in development and like traditional AM alloys requires substantial post-processing to include powder heat treatment, surface finish enhancement, inspection, and machining before placed in service. The combination of limited feedstock sources, high temperature processing, oxygen sensitivity, fracture prone nature, and need for elevated temperature mechanical testing limit the number of qualified facilities capable of post-processing AM refractory materials, which add to cost and schedule constraints. However, properly implemented refractory metal AM can overcome existing manufacture limitations by greatly increasing design flexibility, new material options, reduced price, decreased lead-time, and leverage the ever growing AM commercial supply base.

Refractory metal additive manufacture↗
NASA NTRSDate not supplied

Additive Manufacture of Refractory Metals for Aerospace Applications

High temperature refractory metals are required for a number of high temperature propulsion applications. Refractory metals are expensive, difficult to manufacture with high buy-to-fly ratios, and few vendors. Additive manufacture (AM) is used to produce C103, Molybdenum (Mo), and Tungsten (W) reaction chamber and thrust stand-off as well as Iridium ultra-fine lattice catalysts for integration into 1 N green propulsion thrusters. Refractory AM is in development and like traditional AM alloys requires substantial post-processing to include powder heat treatment, surface finish enhancement, inspection, and machining before placed in service. The combination of limited feedstock sources, high temperature processing, oxygen sensitivity, fracture prone nature, and need for elevated temperature mechanical testing limit the number of qualified facilities capable of post-processing AM refractory materials, which add to cost and schedule constraints. However, properly implemented refractory metal AM can overcome existing manufacture limitations by greatly increasing design flexibility, new material options, reduced price, decreased lead-time, and leverage the ever growing AM commercial supply base.

Refractory metal additive manufacture↗
DOE OSTI2021

Exploring QCD Factorization at Moderate Energy Scales

Asymptotic freedom in QCD facilitates the use of partonic degrees of freedom over short distances, but physical processes are sensitive to a wide range of scales. Thus, it is necessary in QCD calculations to utilize a factorization scheme to separate a process into perturbative and non-perturbative factors. This separation relies on an assumption that one energy scale is infinitely larger than the other scales involved in the process. However, much experimental research in areas such as nucleon structure and quark-hadron duality occur at more moderate energy scales where that basic assumption may not be true but perturbative calculations should still be useful. Thus, an exploration of the limits of factorization at more moderate energy scales is needed. This dissertation examines various aspects of factorization at these energy scales first by applying the necessary approximations to a simple model where exact calculations are possible and so the effects of these approximations can be quantified. This is followed by examining areas where corrections are known to be needed. First is an exploration of target mass corrections (TMCs) in the case of deep inelastic scattering (DIS), including a discussion of what large corrections imply about the target structure. Second, is a general examination of PDFs and FFs at moderate scales. Third, I will discuss how this fits into the long-term effort to study the transition between small transverse momentum (generated non-perturbatively) and large transverse momentum (generated in the hard process)

Moffat, Eric↗
DOE OSTI2023

Pressure-based process monitoring of direct-ink write material extrusion additive manufacturing

As additive manufacturing (AM) has become a reliable method for creating complex and unique hardware rapidly, the quality assurance of printed parts remains a priority. In situ process monitoring offers an approach for performing quality control while simultaneously minimizing post-production inspection. For extrusion printing processes, direct linkages between extrusion pressure fluctuations and print defects can be established by integrating pressure sensors onto the print head. In this work, the sensitivity of process monitoring is tested using engineered spherical defects. Pressure and force sensors located near an ink reservoir and just before the nozzle are shown to assist in identification of air bubbles, changes in height between the print head and build surface, clogs, and particle aggregates with a detection threshold of 60–70% of the nozzle diameter. Visual evidence of printed bead distortion is quantified using optical image analysis and correlated to pressure measurements. Importantly, this methodology provides an ability to monitor the quality of AM parts produced by extrusion printing methods and can be accomplished using commonly available pressure-sensing equipment.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Sensitivity of warm-frontal processes to cloud-nucleating aerosol concentrations

An extratropical cyclone that crossed the United States on 9-11 April 2009 was successfully simulated at high resolution (3-km horizontal grid spacing) using the Colorado State University Regional Atmospheric Modeling System. The sensitivity of the associated warm front to increasing pollution levels was then explored by conducting the same experiment with three different background profiles of cloud-nucleating aerosol concentration. To the authors' knowledge, no study has examined the indirect effects of aerosols on warm fronts. The budgets of ice, cloud water, and rain in the simulation with the lowest aerosol concentrations were examined. The ice mass was found to be produced in equal amounts through vapor deposition and riming, and the melting of ice produced approximately 75% of the total rain. Conversion of cloud water to rain accounted for the other 25%. When cloud-nucleating aerosol concentrations were increased, significant changes were seen in the budget terms, but total precipitation remained relatively constant. Vapor deposition onto ice increased, but riming of cloud water decreased such that there was only a small change in the total ice production and hence there was no significant change in melting. These responses can be understood in terms of a buffering effect in which smaller cloud droplets in the mixed-phase region lead to both an enhanced vapor deposition and decreased riming efficiency with increasing aerosol concentrations. Overall, while large changes were seen in the microphysical structure of the frontal cloud, cloud-nucleating aerosols had little impact on the precipitation production of the warm front.

ice↗
DOE OSTI2025

Microstructural Assessment of Molybdenum Disulfide Coatings Using Nanoindentation Hardness

MoS 2 coatings are used extensively in aerospace and defense applications due to their ultralow friction and high wear resistance. Burnished and resin-bonded MoS 2 coatings are commonly used in these applications due to simplicity in deposition and history of use, despite issues with consistency in coating properties and performance. Physical vapor deposition (PVD) of MoS 2 thin films has emerged as a process alternative in the past 50 years, promising far greater control over film structure and composition but at a greater cost. Despite PVD’s benefits, hesitance to adoption persists in high-consequence applications, not only due to increased costs but variability in resulting coating properties. These variations in properties and subsequent performance are in part due to the complexity of the PVD process and the sensitive interplay between coating process-structure-property relationships. This work aims to demystify the remaining uncertainties of the process-structure-property relationships in PVD MoS 2 . The microstructure and mechanical and tribological properties of 61 different PVD pure MoS 2 coatings are examined herein. Emphasis has been placed on developing performance-based (i.e., hardness, modulus) metrics that can assess microstructural changes (density, orientation, and crystallinity) and be utilized to accelerate process development and coating optimization. Relationships established within suggest that nanoindentation hardness can be used to infer coating performance (i.e., wear rate) and properties (i.e., density, crystalline texture, and stoichiometry). Furthermore, this work demonstrates that PVD MoS 2 coatings close to the theoretical density of MoS 2 consistently have the best tribological performance and can be reliably identified by their hardness.

MoS2↗
NASA NTRS1990

Ames vision group research overview

A major goal of the reseach group is to develop mathematical and computational models of early human vision. These models are valuable in the prediction of human performance, in the design of visual coding schemes and displays, and in robotic vision. To date researchers have models of retinal sampling, spatial processing in visual cortex, contrast sensitivity, and motion processing. Based on their models of early human vision, researchers developed several schemes for efficient coding and compression of monochrome and color images. These are pyramid schemes that decompose the image into features that vary in location, size, orientation, and phase. To determine the perceptual fidelity of these codes, researchers developed novel human testing methods that have received considerable attention in the research community. Researchers constructed models of human visual motion processing based on physiological and psychophysical data, and have tested these models through simulation and human experiments. They also explored the application of these biological algorithms to applications in automated guidance of rotorcraft and autonomous landing of spacecraft. Researchers developed networks for inhomogeneous image sampling, for pyramid coding of images, for automatic geometrical correction of disordered samples, and for removal of motion artifacts from unstable cameras.

Watson, Andrew B.↗
DOE OSTI2022

The REDTOP experiment: Rare $\eta/\eta^{\prime}$ Decays To Probe New Physics

The $\eta$ and $\eta^{\prime}$ mesons are nearly unique in the particle universe since they are almost Goldstone bosons and the dynamics of their decays are strongly constrained. The integrated $\eta$-meson samples collected in earlier experiments amount to $\sim10^{9}$ events. A new experiment, REDTOP (Rare Eta Decays To Probe New Physics), is being proposed, with the intent of collecting a data sample of order 10$^{14}$ $\eta$ (10$^{12}$ $\eta^{\prime}$) for studying very rare decays. Such statistics are sufficient for investigating several symmetry violations, and for searching for particles and fields beyond the Standard Model. In this work we present several studies evaluating REDTOP sensitivity to processes that couple the Standard Model to New Physics through all four of the so-called \emph{portals}: the Vector, the Scalar, the Axion and the Heavy Lepton portal. The sensitivity of the experiment is also adequate for probing several conservation laws, in particular $CP$, $T$ and Lepton Universality, and for the determination of the $\eta$ form factors, which is crucial for the interpretation of the recent measurement of muon $g-2$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1983

Steady flow approximations to the helium r-process

A steady flow approximation to the r-process is presented and used for numerical experiments with physical quantities to determine the sensitivity of the process to variations in those quantities. The effect of neutron capture cross sections along the capture path and of recently available improved beta decay rates on the r-process are discussed. The peaks in the observed r-process yield curve near mass numbers 80 and 130 are roughly characterized by a neutron number density of 10 to the 20th per cu/cm; the mean beta decay rates are about 10/s, and the freezing time is comparable to or less than 0.1 s. The peak near mass number 195 is roughly characterized by a neutron number density of 10 to the 21st/cm, the mean beta decay rates are about 100/s, and the freezing time is comparable to or less than 0.01 s. The flow path of the steady state r-process is sensitively dependent upon the neutron capture cross sections in the flow network and on the values of the beta decay rates.

Cameron, A. G. W.↗
DOE OSTI2022

Tin sensitization and silver activation on indium tin oxide surfaces

Adhesion of electrical contacts on electronic and optoelectronic devices is important for reliable device operation. Sn-sensitization is a widely used process that improves uniformity and adhesion of plated metals to glass and polymer surfaces. Electrically conductive substrates can significantly benefit from improved uniformity, adhesion, and contact resistance to metallic contact layers. In this study, we investigate the process of Sn-sensitization and Ag-activation on indium tin oxide (ITO) surfaces—a dominant transparent conducting oxide used in optoelectronic devices. Here, our results show that ITO films exposed to Sn-sensitization solutions with HCl concentrations below 10 mM effectively modify the surface termination through the process of Sn-sensitization (Sn-bonding at the surface hydroxide sites) without etching the ITO film. However, the subsequent Ag-activation on an ITO surface does not seem to follow the typical response on a glass substrate, suggesting that Ag-activation of an ITO surface is likely limited by the Ag ion size relative to the area density of surface hydroxide sensitization sites.

42 ENGINEERING↗
DOE OSTI2023

Λ Baryon Production in ν¯µ Interactions in the MicroBooNE Detector

The Cabibbo suppressed production of $\Lambda$ baryons in anti-neutrino interactions with nuclei is a rare process that is yet to be measured with a modern neutrino detector with automated reconstruction. The cross section for this process is sensitive to a number of unique nuclear effects, most notably the secondary interactions of the produced hyperon while attempting to escape from the nucleus. Other interactions within the nuclear remnant can impact the estimation of neutrino energy in oscillation measurements, and thus an accurate description of the nuclear environment is required. The strangeness violating hyperon production process is only available to anti-neutrinos. The model of this interaction is implemented into the NuWro neutrino interaction Monte Carlo simulation, and some predictions are presented, focusing on the role of nuclear effects. This model introduces a hyperon-nucleus potential, which calculations from hypernuclear theory permit to be strongly repulsive in th e case of $\Sigma$ baryons. The presence of this potential is found to sculpt the shape of the differential cross section in some variables. The MicroBooNE detector will be described, followed by a description of a measurement of the flux averaged, restricted phase space cross section of Cabibbo suppressed $\Lambda$ baryon production. A sophisticated event selection is employed, as a very large quantity of background neutrino interactions must be removed to perform the measurement with any sensitivity. This selection introduces some novel techniques such as the island finding method, and achieves a background reduction of $\sim 10^6$, with an efficiency of around 7\%. The calculation of the systematic uncertainties will be explained, including two procedures explored to handle sources of background with extremely poor simulation statistics: an in-situ constraint using data from sidebands, and a visual inspection of the data and simulation to remove the troublesome background events. The sensitivity to the $\Lambda$ baryon production cross section is calculated in the form of Bayesian posterior probability distributions, combining the systematic uncertainties with data and simulation statistical uncertainties. As a rare process, the statistical uncertainties are highly non-Gaussian, and the Bayesian approach is applied to include the full shapes of these uncertainties. Data corresponding to $2.2 \times 10^{20}$ protons on target of neutrino mode running and $4.9 \times 10^{20}$ protons on target of anti-neutrino running is analysed. When the data was unblinded, five $\Lambda$ production candidates were selected from the data, consistent with the MC simulation prediction of $5.3 \pm 1.1$ events. The final estimated cross section is $1.8^{+2.0}_{-1.6} \times 10^{-40}$cm$^2/$Ar when employing the sideband constraint procedure. A similar result of $2.0^{+2.2}_{-1.8} \times 10^{-40}$cm$^2/$Ar is obtained when performing the visual scan instead. The methods used in t his analysis are intended to be easily exported to other LArTPC detectors such as the Short Baseline Near Detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

3D printing of packaging inserts from biomass-fungi composites: Environmental sustainability analysis

In this study, a comprehensive Life cycle assessment (LCA) is conducted on molded packaging inserts from expanded polystyrene (EPS) foam, molded packaging inserts from biomass-fungi composite, and 3D-printed packaging inserts from biomass-fungi composite under the low mix / high volume (LMHV) scenario and molded and machined packaging inserts from EPS foam, molded and machined packaging inserts from biomass-fungi composite, and 3D-printed packaging inserts from biomass-fungi composite under the high mix / low volume (HMLV) scenario. Six environmental impact categories—climate change, acidification, eutrophication, fossil resource scarcity, land use, and water consumption—are analyzed to evaluate the environmental trade-offs associated with each type of packaging inserts. Under the LMHV scenario, molded packaging inserts from biomass-fungi composite emerge as the best option due to their lower impact on climate change, acidification and water consumption compared to other types of packaging inserts. Conversely, molded packaging inserts from biomass-fungi composite face challenges in land use and eutrophication, primarily due to raw material production. LCA also reveals that 3D-printed packaging inserts from biomass-fungi composite are the most environmentally favorable option under the HMLV scenario, due to significantly lower contributions to climate change, eutrophication, and water consumption compared to other types of packaging inserts. Conversely, 3D-printed packaging inserts from biomass-fungi composite face challenges in acidification and land use, primarily due to raw material production. As part of the LCA, sensitivity analyses show that sourcing energy from 100% renewable sources substantially lowers climate change impacts across all packaging types, while varying transportation distances results in only minor changes, indicating the dominant role of upstream material and manufacturing processes. Additional sensitivity analysis is conducted under the HMLV scenario to assess the impact of material removal during machining on the environment. The amount of material removal is varied from 10 to 70% for the sensitivity analysis and it highlights that the amount of material removed during machining has no significant impact on climate change for packaging inserts from EPS foam. However, molded and machined packaging inserts from biomass-fungi composite show an increasing trend in climate change with higher amount of material removal, while 3D-printed packaging inserts from biomass-fungi composite exhibit a decreasing trend, driven by reduced raw material usage and energy consumption.

09 BIOMASS FUELS↗