SEARCH · Engineering Papers
Results for “Pressurizer”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Structural Transition Behavior of CdSe/ZnS Core/shell Quantum Dots under High Pressure
The structural phase transition of CdSe/ZnS core/shell quantum dots (QDs) has been studied by in situ angle-dispersive X-ray diffraction under high pressure up to 53.6?GPa. The CdSe core transforms from wurtzite to rock-salt structure near 6.3?GPa and then to Cmcm or distorted Cmcm structure probably occurs at 45.1?GPa which has not been observed in CdSe nanomaterials before. The critical pressure from wurtzite to rock-salt and the bulk modulus of rock-salt phase are much higher than those for bulky and uncapped nanoparticle CdSe. The released sample can be kept in rock-salt phase for a certain time, verified by photoluminescence (PL) spectra, quite different from the reversible transition for pure CdSe. A reasonable interpretation of the experimental phenomena is given by comparing the bulk modulus of the core and shell and studying the stress sate of the core after decompression. Our study suggests that capping a hard shell is an effective approach to quench the high pressure phase of nanomaterial with a reversible phase transition.
Structure Stability of Methane Hydrate at High Pressures
The structural stability of methane hydrate under pressure at room temperature was examined by both in-situ single-crystal and powder X-ray diffraction techniques on samples with structure types I, II, and H in diamond-anvil cells. The diffraction data for types II (sII) and H (sH) were refined to the known structures with space groups Fd3m and P6{sub 3}/mmc, respectively. Upon compression, sI methanehydrate transforms to the sII phase at 120 MPa, and then to the sH phase at 600 MPa. The sII methanehydrate was found to coexist locally with sI phase up to 500 MPa and with sH phase up to 600 MPa. The pure sH structure was found to be stable between 600 and 900 MPa. Methanehydrate decomposes at pressures above 3 GPa to form methane with the orientationally disordered Fm3mstructure and ice VII (Pn3m). The results highlight the role of guest (CH{sub 4})-host (H{sub 2}O) interactions in the stabilization of the hydratestructures under pressure.
Shear-driven instability in zirconium at high pressure and temperature and its relationship to phase-boundary behaviors
Not Available
High-Pressure Raman and Infrared Spectroscopic Study of Prehnite
Explore the source record for details and available documents.
High-pressure-assisted X-ray-induced damage as a new route for chemical and structural synthesis
A novel structural and chemical synthesis of Cs–O derived materials has been demonstrated via X-ray irradiation of Cs 2 C 2 H 2 O 5 at high pressure.
Pressure evolution of electrical transport in the 3D topological insulator (Bi,Sb)[subscript 2] (Se,Te)[subscript 3]
Abstract not provided
The relation of the yield stress of high-pressure anvils to the pressure attained at yielding and the ultimate attainable pressure
A sensitive microprofilometer was used to determine the onset of yielding in the anvils of a supported opposed anvil device for the case of 3% cobalt-cemented tungsten carbide as the anvil material. In addition, it is shown how the commencement of yielding in boron carbide pistons, the yield strength being known, can be used to obtain the transition pressure to a conducting phase in gallium phosphide. The transition pressures of bismuth and gallium phosphide are obtained and it is found that these transitions are extremely close to the maximum attainable pressure in, respectively, a maraging steel and a 3% cobalt-cemented tungsten carbide.
The influence of pressure on the phase stability of nanocomposite Fe{sub 89}Zr{sub 7}B{sub 4} during heating from energy dispersive x-ray diffraction
Nanocomposite materials consisting of small crystalline grains embedded within an amorphous matrix show promise for many soft magnetic applications. The influence of pressure is investigated by in situ diffraction of hammer milled Fe{sub 89}Zr{sub 7}B{sub 4} during heating through the {alpha}{yields}{gamma} Fe transition at 0.5, 2.2, and 4.9 GPa. The changes in primary and secondary crystallization onset are described by diffusion and the energy to form a critical nucleus within the framework of classical nucleation theory.
Pressurizing the HgCr[subscript 2]Se[subscript 4] spinel at room temperature
Abstract not provided
High pressure elasticity and thermal properties of depleted uranium
Abstract not provided
A new high pressure and temperature equation of state of fcc cobalt
Abstract not provided
Diffusion Creep of Enstatite at High Pressures Under Hydrous Conditions: Diffusion Creep of Hydrous Enstatite
Mantle convection and large-scale plate motion depend critically on the nature of the lithosphere-asthenosphere boundary and thus on the viscosity structure of Earth's upper mantle, which is determined by the rheological properties of its constituent minerals. To constrain the flow behavior of orthopyroxene, the second most abundant constituent of the upper mantle, deformation experiments were carried out in triaxial compressive creep on fine-grained (~6 μm) samples of enstatite at high pressures (3.8–6.3 GPa) and high temperatures (1323–1573 K) using a deformation-DIA apparatus. Based on results from this study, the deformation behavior of enstatite is quantitatively presented in the form of a flow law that describes the dependence of deformation rate on differential stress, water fugacity, temperature, and pressure. Specifically, the creep rate depends approximately linearly on stress, indicating deformation in the diffusion creep regime. A least squares regression fit to our data yielded a flow law for diffusion creep with an activation energy of ~200 kJ/mol and an activation volume of ~14 × 10 -6 m 3 /mol. The magnitude of the water-weakening effect is similar to that for olivine with a water fugacity exponent of r ≈ 0.7. This strong dependence of viscosity on water fugacity (concentration) indicates that the viscosity of an orthopyroxene-bearing mantle varies from one geological setting to another, depending on the large-scale water distribution. Based on the rheology contrast between olivine and enstatite, we conclude that olivine is weaker than enstatite throughout most of the upper mantle except in some shallow regions in the diffusion creep regime.
High-Pressure Synthesis of a Pentazolate Salt
The pentazolates, the last all-nitrogen members of the azole series, have been notoriously elusive for the last hundred years despite enormous efforts to make these compounds in either gas or condensed phases. Here, we report a successful synthesis of a solid state compound consisting of isolated pentazolate anions N5–, which is achieved by compressing and laser heating cesium azide (CsN3) mixed with N2 cryogenic liquid in a diamond anvil cell. The experiment was guided by theory, which predicted the transformation of the mixture at high pressures to a new compound, cesium pentazolate salt (CsN5). Electron transfer from Cs atoms to N5 rings enables both aromaticity in the pentazolates as well as ionic bonding in the CsN5 crystal. This work provides critical insight into the role of extreme conditions in exploring unusual bonding routes that ultimately lead to the formation of novel high nitrogen content species.
Ambient-Pressure XPS Studies of Reactions of Alcohols on SrTiO 3 (100)
Explore the source record for details and available documents.
[beta]-diopside, a new ultrahigh-pressure polymorph of CaMgSi[subscript 2]O[subscript 6] with six-coordinated silicon
Abstract not provided