Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photoexcitations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

SiGe/Si heterojunction internal photoemission long-wavelength infrared detectors fabricated by molecular beam epitaxy

A new SiGe/Si heterojunction internal photoemission (HIP) long-wavelength infrared (LWIR) detector has been fabricated by molecular beam epitaxy (MBE). The detection mechanism of the SiGe/Si HIP detector is infrared absorption in the degenerately doped p+-SiGe layer followed by internal photoemission of photoexcited holes over a heterojunction barrier. By adjusting the Ge concentration in the SiGe layer, and, consequently, the valence band offset between SiGe and Si, the cutoff wavelength of SiGe HIP detectors can be extended into the LWIR (8-17-micron) regime. Detectors were fabricated by growing p+-SiGe layers using MBE on patterned p-type Si substrates. The SiGe layers were boron-doped, with concentrations ranging from 10 to the 19th/cu cm to 4 x 10 to the 20th/cu cm. Infrared absorption of 5-25 percent in a 30-nm-thick p+-SiGe layer was measured in the 3-20-micron range using a Fourier transform infrared spectrometer. Quantum efficiencies of 3-5 percent have been obtained from test devices in the 8-12-micron range.

Lin, True-Lon↗

Fe II emission lines. I - Chromospheric spectra of red giants

A 'difference filtering' algorithm developed by Ayers (1979) is used to construct high-quality high-dispersion long-wavelength IUE spectra of three giant stars. Measurements of all the emission lines seen between 2230 and 3100 A are tabulated. The emission spectrum of Fe II is discussed in comparison with other lines whose formation mechanisms are well understood. Systematic changes in the Fe II spectrum are related to the different physical conditions in the three stars, and examples are given of line profiles and ratios which can be used to determine conditions in the outer atomspheres of giants. It is concluded that most of the Fe II emission results from collisional excitation and/or absorption of photospheric photons at optical wavelengths, but some lines are formed by fluorescence, being photoexcited by other strong chromospheric lines. Between 10 and 20 percent of the radiative losses of Fe II arise from 10 eV levels radiatively excited by the strong chromospheric H Ly-alpha line.

Judge, P. G.↗

Applications of ultrashort laser pulses in science and technology; Proceedings of the Meeting, The Hague, Netherlands, Mar. 12, 13, 1990

Topics discussed are on the generation of high-intensity femtosecond lasers, the high-repetition and infrared femtosecond pulses, and physics of semiconductors and applications. Papers are presented on the femtosecond pulse generation at 193 nm; the generation of intense subpicosecond and femtosecond pulses; intense tunable subpicosecond and femtosecond pulses in the visible and infrared, generated by optical parametric oscillators; a high-efficiency high-energy optical amplifier for femtosecond pulses; and the generation of solitons, periodic pulsing, and nonlinearities in GaAs. Other papers are on ultrafast relaxation dynamics of photoexcited carriers in GaAs, high-order optical nonlinear susceptibilities of transparent glasses, subnanosecond risetime high-power pulse generation using photoconductive bulk GaAs devices, femtosecond studies of plasma formation in crystalline and amorphous silicon, and subpicosecond dynamics of hot carrier relaxation in InP and GaAs.

Antonetti, Andre↗

Solar Pumped Lasers and Their Applications

Since 1980, NASA has been pursuing high power solar lasers as part of the space power beaming program. Materials in liquid, solid, and gas phases have been evaluated against the requirements for solar pumping. Two basic characteristics of solar insolation, namely its diffuse irradiance and 5800 K blackbody-like spectrum, impose rather stringent requirements for laser excitation. However, meeting these requirements is not insurmountable as solar thermal energy technology has progressed today, and taking advantage of solar pumping lasers is becoming increasingly attractive. The high density photons of concentrated solar energy have been used for mainly electric power generation and thermal processing of materials by the DOE Solar Thermal Technologies Program. However, the photons can interact with materials through many other direct kinetic paths, and applications of the concentrated photons could be extended to processes requiring photolysis, photosynthesis, and photoexcitation. The use of solar pumped lasers on Earth seems constrained by economics and sociopolitics. Therefore, prospective applications may be limited to those that require use of quantum effects and coherency of the laser in order to generate extremely high value products and services when conventional and inexpensive means are ineffective or impossible. The new applications already proposed for concentrated solar photons, such as destruction of hazardous waste, production of renewable fuel, production of fertilizer, and air/water pollution controls, may benefit from the use of inexpensive solar pumped laser matched with the photochemical kinetics of these processes.

Lee, Ja H.↗

N III line emission in planetary nebulae - Not Bowen fluorescence

A direct comparison of photometrically observed line ratios in the N III 4640 and 4100 A multiplets emitted by planetary nebulae with theoretically predicted ratios expected from the postulated Bowen process of selective photoexcitation by an O III resonance line shows that the N III lines are not produced by the Bowen process as has been commonly accepted. This will have consequences for the interpretation of these lines in other astrophysical sources. A further, unexpected result is that the N III level populations involved are found to be essentially in statistical equilibrium. Possible populating mechanisms are briefly discussed.

Kastner, S. O.↗

Improved calculations for the C III 1907,1909 and Si III 1883,1892 electron density sensitive emission-line ratios, and a comparison with IUE observations

Atomic data are used in conjunction with the statistical equilibrium code of Dufton (1977) to calculate relative C III and Si III level populations, and hence emission-line strengths for a range of electron temperatures and densities. It is assumed that photoexcitation and deexcitaton rates are negligible in comparison with the corresponding collisional rates, that ionization to and recombination from other ionic levels are slow compared with bound-bound rates, and that all transitions are optically thin. The observed values of R1 and R2 for several planetary nebulae and a symbiotic star, measured from high-resolution spectra obtained with the IUE satellite, lead to electron densities that are compatible, and are also in good agreement with those deduced from line ratios in other species.

Keenan, F. P.↗

Quantitative photoabsorption and fluorescence spectroscopy of benzene, naphthalene, and some derivatives at 106-295 nm

Photoabsorption and fluorescence cross sections of benzene, (o-, m-, p-) xylenes, naphthalene, 1-methylnaphthalene, and 2-ethylnaphthalene in the gas phase are measured at 106-295 nm using synchrotron radiation as a light source. Fluorescences are observed from the photoexcitation of benzene and xylenes at 230-280 nm and from naphthalene and its derivatives at 190-295 nm. The absolute fluorescence cross section is determined by calibration with respect to the emission intensity of the NO(A-X) system, for which the fluorescence quantum yield is equal to 1. To cross-check the current calibration method, the quantum yield of the SO2(C-X) system at 220-230 nm was measured since it is about equal to 1. The current quantum-yield data are compared with previously published values measured by different methods.

Suto, Masako↗

Direct detection of C4H2 photochemical products - Possible routes to complex hydrocarbons in planetary atmospheres

The photochemistry of diacetylene (C4H2), the largest hydrocarbon to be unambiguously identified in planetary atmospheres, is of considerable importance to understanding the mechanisms by which complex molecules are formed in the solar system. In this work, the primary products of C4H2's ultraviolet photochemistry were determined in a two-laser pump-probe scheme in which the products of C4H2 photoexcitation are detected by vacuum ultraviolet photoionization in a time-of-flight mass spectrometer. Three larger hydrocarbon primary products were observed with good yield in the C4H2 + C4H2 reaction: C6H2, C8H2, and C8H3. Neither C6H2 or C8H3 is anticipated by current photochemical models of the atmospheres of Titan, Uranus, Neptune, Pluto, and Triton. The free hydrogen atoms that are released during the formation of the C8H3 and C8H2 products also may partially offset the role of C4H2 in catalyzing the recombination of free hydrogen atoms in the planetary atmospheres.

Bandy, Ralph E.↗

AlGaAs-GaAs quantum-well lasers for direct solar photopumping

The paper theoretically examines the solar power requirements for low-threshold AlGaAs-GaAs quantum-well lasers directly photopumped by focused sunlight. A model of separate-confinement quantum-well-heterostructure (SCQWH) lasers was developed, which explicitly treats absorption and transport phenomena relevant to solar pumping. The model was used to identify separate-confinement single-quantum-well laser structures which should operate at photoexcitation intensities of less than 10,000 suns.

Unnikrishnan, Sreenath↗

Direct solar pumping of semiconductor lasers: A feasibility study

This report describes results of NASA Grant NAG-1-1148, entitled Direct Solar Pumping of Semiconductor Lasers: A Feasibility Study. The goals of this study were to provide a preliminary assessment of the feasibility of pumping semiconductor lasers in space with directly focused sunlight and to identify semiconductor laser structures expected to operate at the lowest possible focusing intensities. It should be emphasized that the structures under consideration would provide direct optical-to-optical conversion of sunlight into laser light in a single crystal, in contrast to a configuration consisting of a solar cell or storage battery electrically pumping a current injection laser. With external modulation, such lasers could perhaps be efficient sources for intersatellite communications. We proposed specifically to develop a theoretical model of semiconductor quantum-well lasers photopumped by a broadband source, test it against existing experimental data where possible, and apply it to estimating solar pumping requirements and identifying optimum structures for operation at low pump intensities. These tasks have been accomplished, as described in this report of our completed project. The report is organized as follows: Some general considerations relevant to the solar-pumped semiconductor laser problem are discussed in Section 2, and the types of structures chosen for specific investigation are described. The details of the laser model we developed for this work are then outlined in Section 3. In Section 4, results of our study are presented, including designs for optimum lattice-matched and strained-layer solar-pumped quantum-well lasers and threshold pumping estimates for these structures. It was hoped at the outset of this work that structures could be identified which could be expected to operate continuously at solar photoexcitation intensities of several thousand suns, and this indeed turned out to be the case as described in this section. Our project is summarized in Section 5, and information on publications resulting from this work is provided in Section 6.

Anderson, Neal G.↗

Predissociation in N2(C'4, 1 Sigma u +) and other N2 states and its importance in the atmospheres of Titan and Triton

The objectives of this program are to further the understanding of the upper atmospheres of Titan, Triton, and the Earth in terms of the observed emissions of the 13-14 eV states of N2. These states are generated at quite high rates, yet very little emission is observed from them. The reasons are complex, involving resonance trapping and predissociation, and it is desired to quantify the effects of predissociation, particularly on the c(sub 4)' 1 Sigma(sub u),(sup +) state of N2. Earlier experiments had indicated that predissociation of the c(sub 4)' state was of little importance, yet over the last two years a growing body of evidence has shown that for levels above v = 2, predissociation is in fact a major process. It is the v = 0 level for which production by electron bombardment and photoexcitation is highest, and so it has been most important to evaluate the effects of predissociation on this particular level. The goal has been to target c(sub 4)' (v = 0) for a thorough analysis, in which both the extent of predissociation as a function of rotational level and the atomic product branching ratio, where the only possible products are N(4S) + N(4S) and N(2D) + N(4S), are determined. For the first year of funding, the intention was to demonstrate two-photon excitation of the intermediate N2(a(sup 1) Pi(sub g)) state, so that the gap to the 13 eV energy region could be bridged, and then use a second laser to reach the c(sub 4)' state itself.

Slanger, Tom G.↗

Quantum-well lasers for direct solar photopumping

Semiconductor lasers directly photopumped by focused sunlight may be viable sources of coherent light for intersatellite communications and other low-power spaceborne applications. In this work, we theoretically explore the possibility of realizing such devices. We specifically assess solar pumped operation of separate-confinement-quantum-well heterostructure (SCQWH) lasers based on InGaAs, GaAs, and AlGaA, as fabrication technology for these lasers is mature and they can operate at very low thresholds. We develop a model for step-index single-well SCQWH lasers photopumped by sunlight, examine how threshold solar photoexcitation intensities depend upon material and structure parameters, design optimum structures for solar-pumped operation, and identify design tradeoffs. Our results suggest that laser action should be possible in properly designed structures at readily achievable solar concentrations and that optimum designs for solar-pumped SCQWH lasers differ significantly from those for analogous current injection devices.

Unnikrishnan, Sreenath↗

Investigation of the basic physics of high efficiency semiconductor hot carrier solar cell

The main purpose of this research program is to investigate potential semiconductor materials and their multi-band-gap MQW (multiple quantum wells) structures for high efficiency solar cells for aerospace and commercial applications. The absorption and PL (photoluminescence) spectra, the carrier dynamics, and band structures have been investigated for semiconductors of InP, GaP, GaInP, and InGaAsP/InP MQW structures, and for semiconductors of GaAs and AlGaAs by previous measurements. The barrier potential design criteria for achieving maximum energy conversion efficiency, and the resonant tunneling time as a function of barrier width in high efficiency MQW solar cell structures have also been investigated in the first two years. Based on previous carrier dynamics measurements and the time-dependent short circuit current density calculations, an InAs/InGaAs - InGaAs/GaAs - GaAs/AlGaAs MQW solar cell structure with 15 bandgaps has been designed. The absorption and PL spectra in InGaAsP/InP bulk and MQW structures were measured at room temperature and 77 K with different pump wavelength and intensity, to search for resonant states that may affect the solar cell activities. Time-resolved IR absorption for InGaAsP/InP bulk and MQW structures has been measured by femtosecond visible-pump and IR-probe absorption spectroscopy. This, with the absorption and PL measurements, will be helpful to understand the basic physics and device performance in multi-bandgap InAs/InGaAs - InGaAs/InP - InP/InGaP MQW solar cells. In particular, the lifetime of the photoexcited hot electrons is an important parameter for the device operation of InGaAsP/InP MQW solar cells working in the resonant tunneling conditions. Lastly, time evolution of the hot electron relaxation in GaAs has been measured in the temperature range of 4 K through 288 K using femtosecond pump-IR-probe absorption technique. The temperature dependence of the hot electron relaxation time in the X valley has been measured.

Alfano, R. R.↗

The circumstellar nature of the metallic features in a hot DA white dwarf

A new co-added IUE echelle spectrum of the bright DA white dwarf CD -38 deg 10980, together with a newly determined radial velocity for this star, indicate that the sharp lined Si and C absorption features seen in the UV are clearly circumstellar in origin. Absorption in both excited and ground state transitions occurs at a velocity displaced by -12.1 +/- 2.0 km.s with respect to the photospheric velocity. Weak features due to the Si IV doublet are seen at a velocity intermediate between that of the circumstellar features and the photosphere. First time estimates of column densities for excited and ground states of C II, Si II, and Si III are derived. These quantities are used with electron density estimates derived from these species to determine the location and physical conditions of the circumstellar gas in the vicinity of CD -38 deg 10980. If collisional excitation alone is responsible for the excited levels of Si III observed in CD -38 deg 10980, then electron densities in the circumstellar gas must exceed 10(exp 9)/cu cm. Substantially lower electron densities are possible if the circumstellar gas is located near enough to the star so that photoexcitation is the dominant process responsible for the excited lines seen in the UV. Strong limits are placed on the photospheric abundance of Si and C in the star itself. These limits are in sharp contrast to the theoretical predictions of radiative levitation in which Si, but not C, is expected in the photosphere of a white dwarf such as CD -38 deg 10980. The interstellar line of sight to CD -38 deg 10980 is also investigated.

Holberg, J. B.↗

Electromagnetic Modeling of Distributed-Source-Excitation of Coplanar Waveguides: Applications to Traveling-Wave Photomixers

In this work an electromagnetic model and subsequent design is presented for a traveling-wave, coplanar waveguide (CPW) based source that will operate in the THz frequency regime. The radio frequency (RF) driving current is a result of photoexcitation of a thin GaAs membrane using two frequency-offset lasers. The GaAs film is grown by molecular-beam-epitaxy (MBE) and displays sub-ps carrier lifetimes which enable the material conductivity to be modulated at a very high rate. The RF current flows between electrodes deposited on the GaAs membrane which are biased with a DC voltage source. The electrodes form a CPW and are terminated with a double slot antenna that couples the power to a quasi-optical system. The membrane is suspended above a metallic reflector to launch all radiation in one direction. The theoretical investigation and consequent design is performed in two steps. The first step consists of a direct evaluation of the magnetic current distribution on an infinitely extended coplanar waveguide excited by an impressed electric current distributed over a finite area. The result of the analysis is the difference between the incident angle of the laser beams and the length of the excited area that maximizes the RF power coupled to the CPW. The optimal values for both parameters are found as functions of the CPW and membrane dimensions as well as the dielectric constants of the layers. In the second step, a design is presented of a double slot antenna that matches the CPW characteristic impedance and gives good overall performance. The design is presently being implemented and measurements will soon be available.

Pasqualini, Davide↗

Photoabsorption Study of Bacillus megaterium, DNA and Related Biological Materials in the Phosphorus K-edge Region

We have measured the x-ray transmission spectra of several biologically related samples in the phosphorus K-edge absorption region. These include elemental red phosphorus, hydrated sodium phosphate (Na3PO4.12H2O), deoxyribonucleic acid (DNA), adenosinetriphosphate (ATP), diolylphosphatidyl choline (DOPC), and Bacillus megaterium spores. Elemental red phosphorus essentially displays an edge-jump. All other spectra are similar in form and energy position. Each spectrum for these substances is dominated by a narrower, more intense first peak and a broader but less intense second peak. The corresponding K-edge absorption thresholds are shifted towards higher energy relative to that for elemental red phosphorus, as expected for increasing degrees of phosphorus oxidation. The B. megaterium spectrum has aspects common to both the phosphate and DNA spectra and is therefore interpreted as a composite of spectra arising from DNA/RNA and phosphates within the spore. The B. megaterium spore spectrum provides needed information for resonant radiation damage studies in the phosphorus K-edge absorption region by identifying candidate photoexcitations. In addition,the absorption spectra will be useful in macromolecular crystallography studies employing anomalous dispersion effects at the phosphorus K-edge.

Frigo, Sean P.↗

Photoabsorption study of Bacillus megaterium, DNA and Related Biological Materials in the Phosphorus K-edge Region

We have measured the x-ray transmission spectra of several biologically related samples in the phosphorus K-edge absorption region. These include red phosphorus, hydrated sodium phosphate (Na3PO4 12 H2O), deoxyribonucleic acid (DNA), adenosinetriphosphate (ATP), diolylphosphatidyl choline (DOPC), and Bacillus megaterium spores. Red phosphorus essentially displays an edge-jump. All other spectra are similar in form and energy position, where each is dominated by a narrower, more intense first peak and a broader but less intense second peak. The corresponding K-edge absorption thresholds are shifted towards higher energy relative to that for red phosphorus, as expected for increasing degrees of phosphorus oxidation. The B.meguterium spectrum has aspects common to both the phosphate and DNA spectra and is therefore interpreted as a composite of spectra arising from DNA/RNA and phosphates within the spore. The B. megaterium spore spectrum provides needed information for resonant radiation damage studies in the phosphorus K-edge absorption region by identifying candidate photoexcitations. In addition, the absorption spectra will be useful in macromolecular crystallography studies employing anomalous dispersion effects at the phosphorus K-edge.

Frigo, Sean P.↗

Atomic Data and Spectral Line Intensities for S XI

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for S XI. The configurations included are 2s(sup 2)2psup 2), 2s2p(sup 3), 2p(sup 4), 2s(sup 2)2p3l and 2s(sup 2)2p4l (I = s , p , d) giving rise to 72 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies, 32, 60, 90, 120, and 150 Ry. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved: The effects of resonances, proton rates, photoexcitation and cascades on level populations have been investigate. The predicted S XI line intensities are compared with EUV and UV observations of the quiet and active Sun.

Landi, E.↗