Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Polarization and distance dependent coupling in linear chains of gold nanoparticles

We studied collective surface plasmon excitations in chains of gold nanoparticles. The resonance frequency of these excitations is a function of the distance between the particles and polarization of the incident light. The near-field coupling between the particles in a chain leads to a cosine squared angular dependence between the polarization of the incident light and the axis connecting the particles. The far-field coupling between the particles results in a sine squared angular dependence. When the incident light is polarized along the chain, the near-field coupling exhibits a red shift, while the far-field exhibits a blue shift of the collective plasmon mode with respect to the mode of the non-interacting particles. Here, we experimentally determined the particle separation for which the resonance frequency in the extinction spectra is polarization-independent.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Identification of engine oil-derived ash nanoparticles and ash formation process for a gasoline direct-injection engine

Engine oil-derived ash particles emitted from internal combustion (IC) engines are unwanted by-products, after oil is involved in in-cylinder combustion process. Since they typically come out together with particulate emissions, no detail has been reported about their early-stage particles other than agglomerated particles loaded on aftertreatment catalysts and filters. To better understand ash formation process during the combustion process, here differently formulated engine oils were dosed into a fuel system of a gasoline direct injection (GDI) engine that produces low soot mass emissions at normal operating conditions to increase the chances to find stand-alone ash particles separated from soot aggregates in the sub-20-nm size range. In addition to them, ash/soot aggregates in the larger size range were examined using scanning transmission electron microscopy (STEM)-X-ray electron dispersive spectroscopy (XEDS) to present elemental information at different sizes of particles from various oil formulations. The STEM-XEDS results showed that regardless of formulated oil type and particle size, Ca, P and C were always contained, while Zn was occasionally found on relatively large particles, suggesting that these elements get together from an early stage of particle formation. The S, Ca and P K-edge X-ray absorption near edge structure (XANES) analyses were performed for bulk soot containing raw ash. The linear combination approach & cross-checking among XANES results proposed that Ca 5 (OH)(PO 4 ) 2 , Ca 3 (PO 4 ) 2 and Zn 3 (PO 4 ) 2 are potentially major chemical compounds in raw ash particles, when combined with the STEM-XEDS results. Despite many reports that CaSO 4 is a major ash chemical when ash found in DPF/GFP systems was examined, it was observed to be rarely present in raw ashes using the S K-edge XANES analysis, suggesting ash transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable colloids in molten inorganic salts

A colloidal solution is a homogeneous dispersion of particles or droplets of one phase (solute) in a second, typically liquid, phase (solvent). Colloids are ubiquitous in biological, chemical and technological processes1, 2, homogenizing highly dissimilar constituents. To stabilize a colloidal system against coalescence and aggregation, the surface of each solute particle is engineered to impose repulsive forces strong enough to overpower van der Waals attraction and keep the particles separated from each other2. Electrostatic stabilization3, 4 of charged solutes works well in solvents with high dielectric constants, such as water (dielectric constant of 80). In contrast, colloidal stabilization in solvents with low polarity, such as hexane (dielectric constant of about 2), can be achieved by decorating the surface of each particle of the solute with molecules (surfactants) containing flexible, brush-like chains2, 5. Here we report a class of colloidal systems in which solute particles (including metals, semiconductors and magnetic materials) form stable colloids in various molten inorganic salts. The stability of such colloids cannot be explained by traditional electrostatic and steric mechanisms. Screening of many solute–solvent combinations shows that colloidal stability can be traced to the strength of chemical bonding at the solute–solvent interface. Theoretical analysis and molecular dynamics modelling suggest that a layer of surface-bound solvent ions produces long-ranged charge-density oscillations in the molten salt around solute particles, preventing their aggregation. Colloids composed of inorganic particles in inorganic melts offer opportunities for introducing colloidal techniques to solid-state science and engineering applications.

Zhang, Hao↗

Leptodermic corrections to the TOV equations and nuclear astrophysics within the effective surface approximation

The macroscopic model for a neutron star (NS) as a liquid drop at the equilibrium is used to extend the Tolman-Oppenheimer-Volkoff (TOV) equations taking into account the gradient terms responsible for the system surface. The parameters of the Schwarzschild metric in the spherical case are found with these surface corrections to the known leading (zero) order of the leptodermic approximation a/R << 1, where a is the NS effective-surface (ES) thickness, and R is the effective NS radius. The energy density $\mathscr{E}$ is considered in a general form including the functions of the particle number density and of its gradient terms. The macroscopic gravitational component $Φ$(ρ) of the energy density is taken into account in the simplest form as expansion in powers of $ρ$ – $\overline{ρ}$, where $\overline{ρ}$ is the saturation density, up to second order, in terms of its contributions to the separation particle energy and incompressibility. Density distributions ρ across the NS ES in the normal direction to the ES, which are derived in the simple analytical form at the same leading approximation, was used for the derivation of the modified TOV (MTOV) equations by accounting for their NS surface corrections. As a result, the MTOV equations are analytically solved at first order and the results are compared with the standard TOV approach of the zero order.

Magner, A. G. [Institute for Nuclear Research, Kyi↗

Interlayer correlated fractional quantum Hall state in the ν = 4 / 5 bilayer system

We perform exact diagonalization studies for fractional quantum Hall states at filling factor 4/5 in a bilayer system, on a torus with various aspect ratios and angles. In this work we find that in the absence of tunneling, two weakly coupled 2/5 layers undergo a phase transition into an interlayer-correlated regime, which is also Abelian with the fivefold degeneracy on the torus. In the limit of zero layer separation, this phase becomes a singlet in the pseudospin variable describing the layer degree of freedom. By studying the Chern-number matrix, we show that the K matrix describing the interlayer-correlated regime requires a matrix dimension larger than two and this regime is in particular not described by a Halperin state. A detailed analysis of possible 4 × 4 K matrices having the requisite symmetries and quantum numbers shows that there is only one equivalence class of such matrices. A model wave function representing this universality class is constructed. The role of separate particle number conservation in both layers is discussed, and it is argued that this additional symmetry allows for the further distinction of two different symmetry-protected Abelian phases in the interlayer correlated regime. Interlayer tunneling breaks this symmetry and can drive the system into a single-layer regime when strong enough. A qualitative phase diagram in the tunneling-layer separation parameter space is proposed based on our numerical results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photon strength and the low-energy enhancement

Several measurements in medium mass nuclei have reported a low-energy enhancement in the photon strength function. Although, much effort has been invested in unraveling the mysteries of this effect, its physical origin is still not conclusively understood. Here, a completely model-independent experimental approach to investigate the existence of this enhancement is presented. The experiment was designed to study statistical feeding from the quasi-continuum (below the neutron separation energy) to individual low-lying discrete levels in {sup 95}Mo produced in the (d, p) reaction. A key aspect to successfully study gamma decay from the region of high-level density is the detection and extraction of correlated particle-gamma-gamma events which was accomplished using an array of Clover HPGe detectors and large area annular silicon detectors. The entrance channel excitation energy into the residual nucleus produced in the reaction was inferred from the detected proton energies in the silicon detectors. Gating on gamma-transitions originating from low-lying discrete levels specifies the state fed by statistical gamma-rays. Any particle-gamma-gamma event in combination with specific energy sum requirements ensures a clean and unambiguous determination of the initial and final state of the observed gamma rays. With these requirements the statistical feeding to individual discrete levels is extracted on an event-by-event basis. The results are presented and compared to {sup 95}Mo photon strength function data measured at the University of Oslo.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Method for enhancing selectivity and recovery in the fractional flotation of particles in a flotation column

The method relates to particle separation from a feed stream. The feed stream is injected directly into the froth zone of a vertical flotation column in the presence of a counter-current reflux stream. A froth breaker generates a reflux stream and a concentrate stream, and the reflux stream is injected into the froth zone to mix with the interstitial liquid between bubbles in the froth zone. Counter-current flow between the plurality of bubbles and the interstitial liquid facilitates the attachment of higher hydrophobicity particles to bubble surfaces as lower hydrophobicity particles detach. The height of the feed stream injection and the reflux ratio may be varied in order to optimize the concentrate or tailing stream recoveries desired based on existing operating conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The magnetic and neutron diffraction studies of La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles prepared via molten salt synthesis

Series of single-phase La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles (x=0.25−0.47) with the size of about 50 nm was prepared in molten NaNO{sub 2}. TEM evidenced well dispersed particles that are not interconnected by sintering bridges in contrast to traditional products. Interestingly, some reduction of the perovskite cell volume, particularly at higher Sr-contents, was detected by XRD. Moreover, reduced magnetization and decreased Curie temperature in comparison to sol–gel samples were observed. Neutron diffraction analysis of the as-prepared nanoparticles and several comparative samples with x=0.37 indicated that the anomalous behavior of studied particles probably originate in the overdoped outer shell. The overdoping might result from both the surface oxygen chemisorption and from an increased Sr concentration in the shell. By all means, the overdoping would lead to compressive surface stress, driving the x=0.37 ground state toward a mixture of FM and A-type AFM ordering as observed by neutron diffraction. - Graphical abstract: La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles with the size of about 50 nm were prepared by newly established method in molten NaNO{sub 2}. TEM proved the formation of well-separated particles without sintering bridges, the major advantage over traditional preparation methods. - Highlights: • Series of La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles was prepared by novel method in NaNO{sub 2} melt. • Lower magnetization and Curie temperature in comparison to sol–gel nanoparticles was observed. • Overdoping of outer shell was indicated by neutron diffraction and cerimetric titration. • Overdoping shifts La{sub 0.37}Sr{sub 0.63}MnO{sub 3} ground state to a mixture of FM and A-type AFM ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved semiclassical model for real-time evaporation of matrix black holes

In this paper, we study real-time classical matrix mechanics of a simplified 2 × 2 matrix model inspired by the black hole evaporation problem. This is a step towards making a quantitative model of real-time evaporation of a black hole, which is realized as a bound state of D0-branes in string theory. The model we study is the reduction of Yang–Mills in 2 + 1 dimension to 0 + 1 dimensions, which has been corrected with an additional potential that can be interpreted as a zero-point energy for fermions. Our goal is to understand the lifetime of such a classical bound state object in the classical regime. To do so, we pay particular attention to when D-particles separate to check that the “off-diagonal modes” of the matrices become adiabatic and use that information to improve on existing models of evaporation. It turns out that the naive expectation value of the lifetime with the fermionic correction is infinite. This is a logarithmic divergence that arises from very large excursions in the separation between the branes near the threshold for classical evaporation. The adiabatic behavior lets us get some analytic control of the dynamics in this regime to get this estimate. This divergence is cutoff in the quantum theory due to quantization of the adiabatic parameter, resulting in a long lifetime of the bound state, with a parametric dependence of order log(1/ℏ).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SPH with dynamical smoothing length adjustment based on the local flow kinematics

Due to the Lagrangian nature of Smoothed Particle Hydrodynamics (SPH), the adaptive resolution remains a challenging task. In this work, we first analyse the influence of the simulation parameters and the smoothing length on solution accuracy, in particular in high strain regions. Based on this analysis we develop a novel approach to dynamically adjust the kernel range for each SPH particle separately, accounting for the local flow kinematics. We use the Okubo–Weiss parameter that distinguishes the strain and vorticity dominated regions in the flow domain. The proposed development is relatively simple and implies only a moderate computational overhead. We validate the modified SPH algorithm for a selection of two-dimensional test cases: the Taylor–Green flow, the vortex spin-down, the lid-driven cavity and the dam-break flow against a sharp-edged obstacle. The simulation results show good agreement with the reference data and improvement of the long-term accuracy for unsteady flows. For the lid-driven cavity case, the proposed dynamical adjustment remedies the problem of tensile instability (particle clustering).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solids Accumulation Scouting Studies

The objective of Solids Accumulation activities was to perform scaled testing to understand the behavior of remaining solids in a Double Shell Tank (DST), specifically AW-105, at Hanford during multiple fill, mix, and transfer operations. It is important to know if fissionable materials can concentrate when waste is transferred from staging tanks prior to feeding waste treatment plants. Specifically, there is a concern that large, dense particles containing plutonium could accumulate in poorly mixed regions of a blend tank heel for tanks that employ mixing jet pumps. At the request of the DOE Hanford Tank Operations Contractor, Washington River Protection Solutions, the Engineering Development Laboratory of the Savannah River National Laboratory performed a scouting study in a 1/22-scale model of a waste staging tank to investigate this concern and to develop measurement techniques that could be applied in a more extensive study at a larger scale. Simulated waste tank solids: Gibbsite, Zirconia, Sand, and Stainless Steel, with stainless steel particles representing the heavier particles, e.g., plutonium, and supernatant were charged to the test tank and rotating liquid jets were used to mix most of the solids while the simulant was pumped out. Subsequently, the volume and shape of the mounds of residual solids and the spatial concentration profiles for the surrogate for heavier particles were measured. Several techniques were developed and equipment designed to accomplish the measurements needed and they included: 1. Magnetic particle separator to remove simulant stainless steel solids. A device was designed and built to capture these solids, which represent the heavier solids during a waste transfer from a staging tank. 2. Photographic equipment to determine the volume of the solids mounds. The mounds were photographed as they were exposed at different tank waste levels to develop a composite of topographical areas. 3. Laser rangefinders to determine the volume of the solids mounds. The mounds were scanned after tank supernatant was removed. 4. Core sampler to determine the stainless steel solids distribution within the solids mounds. This sampler was designed and built to remove small sections of the mounds to evaluate concentrations of the stainless steel solids at different special locations. 5. Computer driven positioner that placed the laser rangefinders and the core sampler in appropriate locations over solids mounds that accumulated on the bottom of a scaled staging tank where mixing is poor. These devices and techniques were effective to estimate the movement, location, and concentrations of the solids representing heavier particles and could perform well at a larger scale The experiment contained two campaigns with each comprised of ten cycles to fill and empty the scaled staging tank. The tank was filled without mixing, but emptied, while mixing, in seven batches; the first six were of equal volumes of 13.1 gallons each to represent the planned fullscale batches of 145,000 gallons, and the last, partial, batch of 6.9 gallons represented a full-scale partial batch of 76,000 gallons that will leave a 72-inch heel in the staging tank for the next cycle. The sole difference between the two campaigns was the energy to mix the scaled staging tank, i.e., the nozzle velocity and jet rotational speed of the two jet pumps. Campaign 1 used 22.9 ft/s, at 1.54 rpm based on past testing and Campaign 2 used 23.9 ft/s at 1.75 rpm, based on visual observation of minimum velocity that allowed fast settling solids, i.e., sand and stainless steel, to accumulate on the scaled tank bottom.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Silicon-Tungsten ECal with Integrated Electronics

We summarize recent R&D progress for a silicon-tungsten electromagnetic calorimeter (ECal) with integrated electronics, designed to meet the ILC physics requirements. A basic physics requirement for ILC detectors is that they provide excellent reconstruction of hadronic final states. This allows access to new physics which is complementary to the LHC. One statement for a requirement on jet reconstruction is that intermediate particles which decay into jets, such as W, Z, or top, can be identified and isolated. This places unprecedented requirements on 2-jet or 3-jet mass resolution, typically at the level of 3-5% using the PFA technique, which makes challenging demands on the calorimeters. The electromagnetic energy resolution is not expected to limit jet resolution using a PFA. However, particle separation - photon-photon and charged hadron-photon - is crucial. In addition, if one provides this kind of imaging calorimeter to meet the PFA needs, these same features will also be put to good use for reconstruction of specific tau decay modes (to enable final-state polarization measurement), to 'track' photons (even if originating from a vertex displaced from the interaction point), to track MIPS, and so forth. Figure 1 and Table 1 provide some context for our ECal design within the SiD detector concept, along with some main design parameters. More detail is included in the presentation.

43 PARTICLE ACCELERATORS↗

Pair and many-body interactions between ligated Au nanoparticles

Here, we report the results of molecular dynamics simulations of the properties of a pseudo-atom (united atom) model of dodecane thiol ligated 5-nm diameter gold nanoparticles (AuNPs) in a vacuum as a function of ligand coverage and particle separation in three states of aggregation, namely, the isolated AuNPs, the isolated pair of AuNPs, and a square lattice of four AuNPs. Our calculations show that the ligand density along a radius emanating from the core of an isolated AuNP has the same gross features for all values of the coverage; it oscillates around a constant value up to a distance along the chain corresponding to the position of the fourth pseudo-atom and then smoothly decays to zero, reflecting both the restricted conformations of the chain near the core surface and the larger numbers of conformations available further from the core. Interaction between two AuNPs generates changes in the ligand distributions of each. We examine the structure and general shape of the ligand envelope as a function of the coverage and demonstrate that the equilibrium structure of the envelope and the deformation of that envelope generated by interaction between the NPs are coverage-dependent so that the shape, depth, and position of the minimum of the potential of mean force display a systematic dependence on the ligand coverage. We propose an accurate analytical description of the calculated potential of mean force as a function of a set of parameters that scale linearly with the ligand coverage. Noting that the conformational freedom of the ligands implies that multiparticle induced deviations from additivity of the pair potential of mean force are likely important; we define and calculate a “bond stretching” effective pair potential of mean force for a square lattice of particles that contains, implicitly, both the three- and four-NP contributions. We find that the bond stretching effective pair potential of mean force in this cluster has a different minimum and a different well depth from the isolated pair potential of mean force. Previous work has found that the three-particle contribution to deviation from pair additivity is monotonically repulsive, whereas we find that the combined three- and four-particle contributions have an attractive well, implying that the three- and four-particle contributions are of comparable magnitude but opposite sign, thereby suggesting that even higher order correction terms likely play a significant role in the behavior of dense assemblies of many nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DNA Extraction by Isotachophoresis in a Microfluidic Channel

Biological assays have many applications. For example, forensics personnel and medical professionals use these tests to diagnose diseases and track their progression or identify pathogens and the host response to them. One limitation of these tests, however, is that most of them target only one piece of the sample - such as bacterial DNA - and other components (e.g. host genomic DNA) get in the way, even though they may be useful for different tests. To address this problem, it would be useful to extract several different substances from a complex biological sample - such as blood - in an inexpensive and efficient manner. This summer, I worked with Maxim Shusteff at Lawrence Livermore National Lab on the Rapid Automated Sample Prep project. The goal of the project is to solve the aforementioned problem by creating a system that uses a series of different extraction methods to extract cells, bacteria, and DNA from a complex biological sample. Biological assays can then be run on purified output samples. In this device, an operator could input a complex sample such as blood or saliva, and would receive separate outputs of cells, bacteria, viruses, and DNA. I had the opportunity to work this summer with isotachophoresis (ITP), a technique that can be used to extract nucleic acids from a sample. This technique is intended to be the last stage of the purification device. Isotachophoresis separates particles based on different electrophoretic mobilities. This technique is convenient for out application because free solution DNA mobility is approximately equal for DNA longer than 300 base pairs in length. The sample of interest - in our case DNA - is fed into the chip with streams of leading electrolyte (LE) and trailing electrolyte (TE). When an electric field is applied, the species migrate based on their electrophoretic mobilities. Because the ions in the leading electrolyte have a high electrophoretic mobility, they race ahead of the slower sample and trailing electrolyte ions. Conversely, the trailing electrolyte ions have a slow electrophoretic mobility, so they lag behind the sample, thus trapping the species of interest between the LE and TE streams. In a typical isotachophoresis configuration, the electric field is applied in a direction parallel to the direction of flow. The species then form bands that stretch across the width of the channel. A major limitation of that approach is that only a finite amount of sample can be processed at once, and the sample must be processed in batches. For our purposes, a form of free-flow isotachophoresis is more convenient, where the DNA forms a band parallel to the edges of the channel. To achieve this, in our chip, the electric field is applied transversely. This creates a force perpendicular to the direction of flow, which causes the different ions to migrate across the flow direction. Because the mobility of the DNA is between the mobility of the leading and the trailing electrolyte, the DNA is focused in a tight band near the center of the channel. The stream of DNA can then be directed to a different output to produce a highly concentrated outlet stream without batch processing. One hurdle that must be overcome for successful ITP is isolating the electrochemical reactions that result from the application of high voltage for the actual process of isotachophoresis. The electrochemical reactions that occur around metal electrodes produce bubbles and pH changes that are detrimental to successful ITP. The design of the chips we use incorporates polyacrylamide gels to serve as electrodes along the central channel. For our design, the metal electrodes are located away from the chip, and high conductivity buffer streams carry the potential to the chip, functioning as a 'liquid electrode.' The stream then runs alongside a gel barrier. The gel electrode permits ion transfer while simultaneously isolating the separation chamber from any contaminants in the outer, 'liquid electrode' streams. The difference in potential from one side of the chip to the other creates an electric field. This field traverses the inner, separation channel, containing the leading electrolyte, the trailing electrolyte, and the sample of interest (DNA). To increase the ease of use of the chips, a newer chip design has been fabricated. This design has wire electrodes integrated on the chip, rather than elsewhere. To keep the pH changes and bubbling isolated from the separation channel, the chip contains deeper wells near the electrodes so that the flowing buffer can wash away any gases that form around the electrode. This design is significantly more compact because it eliminates the cumbersome electrode boxes. Eliminating the electrode boxes also decreases the required voltage, making the experiments safer. This happens because when the 'liquid electrode' streams travel through small diameter tubing, they lose much of their voltage due to the electrical resistance of the fluid in the tubing.

42 ENGINEERING↗

Mass predictions of atomic nuclei in the infinite nuclear matter model

We present here the mass excesses, binding energies, one- and two-neutron, one- and two-proton and {alpha}-particle separation energies of 6727 nuclei in the ranges 4{<=}Z{<=}120 and 8{<=}A{<=}303 calculated in the infinite nuclear matter model. Compared to our predictions of 1999 mass table, the present ones are obtained using larger data base of 2003 mass table of Wapstra and Audi and resorting to higher accuracy in the solutions of the {eta}-differential equations of the INM model. The local energy {eta}'s supposed to carry signature of the characteristic properties of nuclei are found to possess the predictive capability. In fact {eta}-systematics reveal new magic numbers in the drip-line regions giving rise to new islands of stability supported by relativistic mean field theoretic calculations. This is a manifestation of a new phenomenon where shell-effect overcomes the instability due to repulsive components of the nucleon-nucleon force broadening the stability peninsula. The two-neutron separation energy-systematics derived from the present mass predictions reveal a general new feature for the existence of islands of inversion in the exotic neutron-rich regions of nuclear landscape, apart from supporting the presently known islands around {sup 31}Na and {sup 62}Ti. The five global parameters representing the properties of infinite nuclear matter, the surface, the Coulomb and the pairing terms are retained as per our 1999 mass table. The root-mean-square deviation of the present mass-fit to 2198 known masses is 342 keV, while the mean deviation is 1.3 keV, reminiscent of no left-over systematic effects. This is a substantive improvement over our 1999 mass table having rms deviation of 401 keV and mean deviation of 9 keV for 1884 data nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Application of sequential extraction and hydrothermal treatment for characterization and enrichment of rare earth elements from coal fly ash

Rare earth elements (REE) play a critical role in the global economy. The concern about the REE supply challenge has stimulated global interest in recovering REE from alternative non-conventional REE sources such as coal fly ash. In this paper, sequential extraction, physical separations and hydrothermal alkaline treatment were explored for characterization and enrichment of REE from coal fly ash. Seven-step sequential extraction of coal fly ash has demonstrated that 86.1% of total REE were associated with the glassy phase of the fly ash, with the remaining REE mainly distributed in the organic and sulfides phase (8.3%), the exchangeable phase (3.7%), and the carbonates phase (1.5%). A process combining physical separations, namely, particle size separation and magnetic separation, and hydrothermal alkaline treatment was proposed for enrichment of REE from coal fly ash. The optimal hydrothermal alkaline treatment condition was determined. It was demonstrated that NaOH concentration, solid-to-liquid ratio, temperature, and reaction duration had significant influence on ash dissolution in NaOH solution. Grinding could also enhance ash dissolution during subsequent hydrothermal alkaline treatment. Furthermore REE were enriched from coal fly ash from 325 mg/kg to 877 mg/kg via the proposed process under optimal hydrothermal alkaline treatment conditions.

01 COAL, LIGNITE, AND PEAT↗

A coarse-grained model of clay colloidal aggregation and consolidation with explicit representation of the electrical double layer

The aggregation of clay minerals in liquid water exemplifies colloidal self-assembly in nature. These negatively charged aluminosilicate platelets interact through multiple mechanisms with different sensitivities to particle shape, surface charge, aqueous chemistry, and interparticle distance and exhibit complex aggregation structures. Experiments have difficulty resolving the associated colloidal assemblages at the scale of individual particles. Conversely, all-atom molecular dynamics (MD) simulations provide detailed insight on clay colloidal interaction mechanisms, but they are limited to systems containing a few particles. We develop a new coarse-grained (CG) model capable of representing assemblages of hundreds of clay particles with accuracy approaching that of MD simulations, at a fraction of the computational cost. Our CG model is parameterized based on MD simulations of a pair of smectite clay particles in liquid water. A distinctive feature of our model is that it explicitly represents the electrical double layer (EDL), i.e., the cloud of charge-compensating cations that surrounds the clay particles. Our model captures the simultaneous importance of long-range colloidal interactions (i.e., interactions consistent with simplified analytical models, already included in extant clay CG models) and short-range interactions such as ion correlation and surface and ion hydration effects. The resulting simulations correctly predict, at low solid-water ratios, the existence of ordered arrangements of parallel particles separated by water films with a thickness up to ~10 nm and, at high solid-water ratios, the coexistence of crystalline and osmotic swelling states, in agreement with experimental observations.

54 ENVIRONMENTAL SCIENCES↗